Restoring data problem!

Hi!
I already did a backup file for my old iphone4 16G but then iTunes has restored (From the same backup file I did) all data into my new iphone5 32G (my conacts, my only 5 apps!) except my 470 photos! Why?! Where they gone?! What should i do now? Please!
Notice that the processing of restoring my new iphone5 takes around 2 houres! which means that my large photos data are still in the iTunes! (In the backup file I did).

Take a look at http://www.blackberry.com/btsc/KB36134
It doesn't refer to the first error, but it does the second.
- Ira

Similar Messages

Restoring data problem after 10.3 update !!

hello guys,
I have a hugr problem please HELP
I just updated my Q5 to BB 10.3 this morning and of course I didn't have enough space so I did a full back-up by BB Link and then wiped the device and made the back up.
after that I tried to do the restore by BB Link but it didn't work, it's gives me error as the following:
"Unable to save name
An error occurred while saving devie name. If the error persists reconnect your device and try again."
PLEASE HELP me in solving this problem !!!or how I could be back to BB 10.2 to get my data back !!

hello MORPHEUS87,
please find the resolution in this article from the BlackBerry public knowledge base:
KB36134 BlackBerry Link fails when attempting to restore a backup file and displays "Restore was cancelled. The operation was cancelled and some items were not restored."
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Restore data problem

My 32GB IPhone 4S was stolen and replaced with new 16 GB IPhone 5S. I backed up my information of 4S (about 12GBs) in ITunes but realised that new 5S only has capacity of 12.8GB (not really 16GB). Due to the capacity limit, I was unable to restore. Advise needed. Thank you in advance for your kind assistance.

There isn't anything that you can do about restoring the backup of the larger phone to a smaller phone. You cannot select certain things to restore from the backup. It is either all or none. You would have to sync data over from iTunes, etc. individually to the smaller phone.

HT1766 ipod restoring data problem

when trying to restore a backup onto ipod with the latest version installed am getting the error message "ipod software update server could not be contacted" asks me to check my network settings and connection but i don't know what these are - help!!!

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

My problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

my problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

Not much you can do. You overwrote your current data with older data when you restored the phone from that backup. Your data's gone.

Will Time Machine restore software problems as well as data?

Hi all -
I've got a 20" aluminum (2007) iMac with Leopard (all updates installed) and Time Machine. I'm having a shutdown problem that I'm trying to resolve. Yesterday, the computer started powering itself off randomly, as if someone pulled the power plug. I ran both the quick and extended Apple Hardware Tests, and both came up clean (no errors). I'm thinking this may be a software problem.
I'd like to reload Leopard to clean up the software. However, I already tried doing a Restore via Time Machine yesterday, and the problem did not go away. I restored to the previous day - prior to when the shut downs started happening.
My question is - If I reload Leopard using the "Restore" feature of Time Machine, does that also copy any problems I had backed up in software to the reloaded system? My guess is yes, since all of my applications remain intact after the Time Machine Restore.
That said, I find Time Machine to be absolutely brilliant in its simplicity and functionality, and think it should be in every single computer user's hands.
At any rate, I'm fearing that I'm going to have to do a clean install and then reinstall all of my software manually to get a truly clean system, then restore data manually via my Time Machine backup. I hope I'm wrong.
Can anybody shed some light? Thanks,
Shelly

it really does back up almost everything, even broken files. Go back to the initial backup and restore from that. If that doesn't fix it, you've got hardware problems.
Crashes are one thing, hangs another, but actual shutdowns where the computer just goes completely off really indicate hardware problems. Software by itself won't do that, even if it's broken.
- gws

HDD fails again after restoring data from Time Machine?

Hello,
I will try to explain my case and end with a question that maybe someone will be able to answer (I hope..):
1. My imac started to run very slow and every 2 minutes or less appeared the coloured wheel for some secs. While the wheel was visible, the Os and all the apps running freezed.
2. Firstly I thought it was a software problem, but after some "testing" I started thinking on a hard drive failure or similar.
3. I did a disk verification whith the Disk Utility and it failed.
4. Panic!
5. I booted from the instalation DVD and tried to repair the hard drive with the Disk Utility.
6. Nothing..
7. I erased my HDD partition and created a new one.
8. I used the DVD to install again all the Os X.
9. After the installation all seemed ok. The HDD passed the verification and the spining coloured wheel appeared only when it should.
10. I restored my data, apps, etc from my Time Machine HDD using the Migration Assistent utility.
11. After the restore, the problems with the HDD reappeared.
Do you think Time Machine can store damaged files and after a restore make a healthy disk (only with the Os X installed) crash?
Has anyone experienced the same?
Thank you!

Sounds like the hard drive might be starting to fail.

I have backed up my old phone to itunes, however, when I try to restore data to new phone it is saying the password is incorrect but I can get into my itunes account with my password so I am doing something wrong?

I have backed up my old phone to itunes, however, when I try to restore data to my new phone it is saying the password is incorrect but I can get into my itunes account with my password so I am doing something wrong?

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

How can I restore data from my iCloud account on a new iPhone 5c with a previous SW version that my old (stolen) iPhone 5?

Hello everybody,
I need help to restore data from my iCloud account on an unused iPhone 5c because my iPhone 5 with a newer iOS update was stolen. When I try I get a message that I cannot retore my data because the iOS on my iPhone 5c is an older version than on the stolen iPhone 5.
There must be a way to do this. I hope to hear from you
thanks!

Welcome to Apple Support Communities
You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

Hard Drive was replaced, but now can't get Apple Backup to restore data

My iMac had a damaged hard drive, so I replaced it and reinstalled Mac OS 10.4, along with iLife 06. My iMac is now up and running again (prior to hard drive replacement it froze and was then unable to get up and running again without repeated attempts at powering down and then up).
Here's my problem. Prior to the replacement, I'd been using Apple's Backup program to backup all my iPhoto and iTunes files to an external harddrive. The files are on the external harddrive, but when I use Backup to restore them, the opened and allegedly restored files have no data in them. (I've been using "restore to alternate location" and putting the restored data in a shared folder on the iMac. Backup runs, and says the data is in this shared folder, but when I go to import data from them, they are empty.)
Fortunately, I did a wholesale copy of my old desktop to my external hard drive in July when it became clear I'd have to replace hard drive, so I was able to get most of my photo and music files restored from that. But from July to October, I used Backup exclusively to save new pictures or music and now I can't find a way to get that data restored (short of trying to pull off the old damaged harddrive).
Any suggestions? Thanks in advance.

I have to admit that the lack of response is somewhat frustrating...

Restoring Data From Previous Install of iTunes

I had a hardware problem with my previous laptop, yet I had been doing weekly backups of data on the laptop. I now have a new laptop and want to restore iTunes and the associated music I currently have on my iPod Shuffle. Is there a way to do this? I have restored data into My Music folder and continue to get the error:
the original file could not be found...
Is there additional data I need to restore?
Shuffle Windows XP

When you use BlackBerry Link to transfer data from an old device to a new one the software should prompt you to connect your old device. That's when you connect the Z10 (as long as you didn't delete everything from the Z10). It copies and then it prompts you to connect the new device.
To make sure BB Link connects to the new device, go into that device's Settings > Storage and Access and make sure you have USB Connection set for "Connect to PC" and not to "Autodetect." You can try toggling to Mac and back to PC if it doesn't recoginize the connection.

Restore Data from Datafiles

Hi Experts,
I am facing a problem with TTS(Transportable Tablespace).
I have a backup of tablespace TBS_DATA as TTS. Now i need to restore that tablespace.
Whenever I tried to restore using IMP command below error occured:
IMP-00003: ORACLE error 19721 encountered
ORA-19721: Cannot find datafile with absolute file number 123 in tablespace TBS_DATA
ORA-06512: at "SYS.DBMS_PLUGTS", line 1730
ORA-06512: at line 1
The TTS backup was not taken by me and i think that the dump file version and the version of backed up datafiles were not same (as I am sure that no datafile is missing in my par file and I simulated a test in which i took a TTS exp then made some change in the tablespace then tried to restore that tablespace got the same error as above).
Now under this scenario my question is,
"Is there any way to restore data from those datafiles ?(i know all the table names and structures)"
BR
obaid

obu wrote:
Hi Experts,
I am facing a problem with TTS(Transportable Tablespace).
I have a backup of tablespace TBS_DATA as TTS. Now i need to restore that tablespace.
Whenever I tried to restore using IMP command below error occured:
IMP-00003: ORACLE error 19721 encountered
ORA-19721: Cannot find datafile with absolute file number 123 in tablespace TBS_DATA
ORA-06512: at "SYS.DBMS_PLUGTS", line 1730
ORA-06512: at line 1
The TTS backup was not taken by me and i think that the dump file version and the version of backed up datafiles were not same (as I am sure that no datafile is missing in my par file and I simulated a test in which i took a TTS exp then made some change in the tablespace then tried to restore that tablespace got the same error as above).
Now under this scenario my question is,
"Is there any way to restore data from those datafiles ?(i know all the table names and structures)"
BR
obaidWhen you talk about transportable tablespace and "backup" and importing -- I'm not sure exactly what you are doing and what you have to work with.
Let's start by you showing the actual command you used that produced the output you gave us.
And it certainly wouldn't hurt if you let us in on the secret of what OS and what version of Oracle you are using.

Restoring data from previous device not working

QUESTION:
My question is, am I able to transfer data from my previous Blackberry 10 device and onto my new Blackberry 10 device if I do not have my old device anymore? (Keeping in mind that I have the previous device data backed up).
Problem:
Ok so:
1. I purchased the Z10 and started adding contacts, apps etc.
2. I purchased the Q10 and transfered data using the switch device system
3. The Q10 I had purchased was faulty so before I handed it in to get a new Q10 I backed it up so I could restore its data on the new Q10.
4. Once I received the new Q10 I handed the old one in and went home and attempted to do the same method of transferring my data across
Turns out that you need your previous bbry for this action to be able to work so I thought I would just connect the new Q10 into Link and just click on restore data and using the backup on my previous Q10 (the faulty one).
5. I get an error every time saying that the restore could not be completed because; did not recognise device, try unplugging and replugging etc etc.
Attempted Resolution from reading the forums:
> Restarted PC
> Took bbry battery and sim card out
> Restoring data via Applications > Media > Settings
> Removed device from Link
> Restarted bbry
> Full security wipe and tried again

When you use BlackBerry Link to transfer data from an old device to a new one the software should prompt you to connect your old device. That's when you connect the Z10 (as long as you didn't delete everything from the Z10). It copies and then it prompts you to connect the new device.
To make sure BB Link connects to the new device, go into that device's Settings > Storage and Access and make sure you have USB Connection set for "Connect to PC" and not to "Autodetect." You can try toggling to Mac and back to PC if it doesn't recoginize the connection.

I have a strange 3g data problem.

I have a strange 3g data problem. At home I have zero 3G connectivity even though all bars are showing and says "3G" and wifi is "Off" ... unless I am on the phone and then magically the 3G data connection works perfectly!! Does anyone have any idea what is happening? Also when I bring my phone to my dad's or my friends house the problem disappears!! Is this a hardware or a AT&T network problem? os is 4.3.3
Also called ATT and they said there was no problem with the network and that it was a hardware issue. Also restored the phone several times but the problem did not go away.

OK, no trouble shooting. The first thing I'd attempt is restarting in Safe Mode. If you still don't have luck try doing both a SMC and PRAM reset, it wouldn't hurt to do the SMC reset a couple of times. If still no luck let us know.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT1414 Erro in restore data

hello apple support i have a problem that when i making restore for a backup done before few days it shows me that i have to put password for this backup and i dont put any password before so what can i do to restore data in my iphone ecpecialy contacts.

If you can't remember the password you set (and yes, you did set it), then you won't be able to use the backup file.

Restoring data problem!

Similar Messages

Maybe you are looking for