Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Similar Messages

Disk Utility: What does "scan image for restore" do?

Before restoring a disk image, I know that I need to use Disk Utility's "Scan Image for Restore…" feature.
Exactly what does this feature do?

I asked because I didn't know.
I was helping someone upgrade his PowerMac G5 from the original 80GB hard drive to a 1TB drive.
Since the G5 can accommodate two internal drives, I could have simply added the new drive and used Disk Utility's "restore" feature to migrate his data directly from the old drive to the new drive.
But it was more convenient for me to work at home so I removed the old drive, and brought it home along with the new drive.
I couldn't connect both drives to my MacBook Pro, since I only have one SATA drive dock. So I did it like this:
1. Connected the old drive to my SATA dock.
2. Create a disk image from his old drive, saving it to an external USB drive.
3. Disconnected the old drive from the SATA dock and connected the new one.
4. Restore the disk image to the new drive
Of course, when I tried step 4, I got an error message about needing to do a scan first. That's what led me to this question.
I have a follow-up question: When I created the image, I didn't bother changing the default image format, which is "compressed." If I had given the matter a little thought, I could have created a read-only image, since I would never need to change the image.
If I had used read-only, would Disk Utility have created the checksums on-the-fly when it created the disk image?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?

Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?

Hi,disc wiped ,OSX10.9 back on ,how do I restore my data from external hard drive ?Any help welcome .

Hi,disc wiped ,OSX10.9 back on ,how do I restore my data from external hard drive ?Any help welcome .

There's Setup Assistant and Migration Assistant. The cleanest way to do it is Setup Assistant, but you only get that option once when you fire up a fresh install of OSX. If you're past that, you could reinstall OSX by booting with Command-R, or you could use Migration Assistant.
Setup/Migration Assistant instructions:
http://support.apple.com/kb/HT5872

My iPhone 5s is stolen and I want to restore iPhone photos from iCloud. I have use iCloud to backup the iPhone photos. Is there any way to restore my photos from iCloud to mac?

My iPhone 5s is stolen and I want to restore iPhone photos from iCloud. I have use iCloud to backup the iPhone photos. Is there any way to restore my photos from iCloud to mac?

The backup of your iPod Touch would include your camera roll photos. Restoring the backup to another iPod Touch or iPhone would recover them. Photos will not be restored by restoring the backup to an iPad.
Note: Apple deletes iCloud backups after 180 days of inactivity so be sure to do this before then.

Transferring 15GB-20GB of RAW images from PC to Mac

Transferring 15GB-20GB of RAW images from PC to Mac
Hi,
I have a 12 MP camera. I can only recover 40% approx. of the deleted RAW image files from my Sandisk memory card. I want to try mwww.cnwrecovery.com which recovers fragmented files, but only for PCs. I have a Mac.
I also want to make sure I get the original large files - or close to that, which has not been the case with 2 out of 4 recovery software I already tried (they yielded files in the 200KB-600KB range.)
I can use a friend's PC but technical questions arise, i.e.:
a) which media is large enough to use for transferring 15GB-20GB, b) formatting of the media (PC/Mac), c) step-by-step precautions to take when transfering images from media to Mac (formatting, transfer location, etc.)
Apparently, according to Apple support, I have to proceed carefully and in a specific order.
I can use thoughtful and detailed feedback from you guys. Thanks a lot.
Raphael

It should be easy. Just copy the files to four or five DVDs that are identified for use with Macs and PCs. Then copy the DVD contents into a folder on the Mac using the Finder. Burning DVDs is slow but it gives you physical backup of the images that is very comforting when recovering from a disaster.
Another way is to FTP the files via Internet using one of the large-files sites but that too is slow. IMO DVDs are the way to go. It is possible to have format issues but unlikely if you use quality modern media that are identified as Mac and PC. Just try it first.
When you Finder-copy to the Mac select the files you want, do not just grab the whole DVD as one chunk. You do not need any Win directory files or whatever non-image-files that may be there. Beware of malware any time you touch a PC. If anyting asks you to "install" something on the Mac side that needs your password, do not do it; copying image files requires no installation.
Good luck!
-Allen

IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?

The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Disk Utility fails to create image from double layer DVD

I burned a double-layer DVD using iDVD. It plays fine on the mac and on set-top DVD players. However, when I try to create an image of the DVD using Disk Utility, I get "Can't create image 'name.cdr' (input/output error)". I've tried re-burning the original disk, but it gets the same error when trying to create an image. I've also tried each of the image types, all with the same result.

I was having similar problems, although I don't think my issues was related to a double-layer DVD. What worked for me was selecting File > New > Disk Image from Folder. Select the DVD in the file open/save dialog with the same options you used before (e.g., DVD/CD master, etc).
HTH
- Dave

Can Disk Utility make a "New Image" from a desktop copy of a DVD?

I have not been able to get Disk Utility to make "new images" of a couple of DVDs. For one of the DVDs, it may have something to do with a hyphen in the title. I haven't a clue why I'm failing with the second of the two DVDs. (Previously, I've had no trouble with about a dozen DVDs so far.)
Several members of this discussion group recommended me to copy&paste or drag&drop the files from a DVD to a new folder (say on the desktop), and then to drag the resulting new folder into the box in Disk Utility, and then to make a disk image using Disk Utility.
(Note: While I believe the original DVDs are not encrypted, I ran an experiment to make double sure, by using MacTheRipper first to produce folders containing clean files.)
However, when I drag the new folder into the box in Disk Utility, and let go of the mouse button, then the folder does not stay in Disk Utility window, but instead springs back to the desktop.
How can I get Disk Utility to make new images from the new desktop folders?
Note:
As a partially successsful work around:
For one of the two original DVDs - which has only about 3.7GB on it - I can sometimes (only sometimes) succeed in doing without Disk Utility simply by dragging the audio and video files from the new desktop folder onto a blank DVD, and then burning that DVD. However, in an average of about two out of every three attempts so far, my Mac rejects the new disk as unusable during the burn process.
For the other original DVD - which has about 4.36GB on it - the contents of the new desktop folder won't fit onto a blank DVD. It then gets messy - shrinking the files - so I'd like to avoid all of that by getting DIsk Utility to work properly.

For the answer, see the following excerpt from my own posting dated 2 May 2006, i.e.:
"I finally found out for myself (from Disk Utility Help) that to make a new image from a file/folder, rather than dragging the folder to the Disk Utility pane, in the top menu bar in Disk Utility you select Images/New/Image from Folder."

Input/output error when attempting to restore external HDD?

I have an old 1TB external HDD that corrupted a while ago, the drive still mounts and i can still see the files inside the drive, unfortunately opening the drive up crashes finder. As i have another 2TB external drive, my next idea was to create a second partition in my 2TB drive and then restore the old 1TB drive into the second partition of the 2TB drive using the disk utility. After a few minutes it comes up with the error message INPUT/OUTPUT error and then stops restoring it.
Any ideas folks as to where to go from here? what the problem might be? or what to try next?
many thanks
Ali

Ali,
your external 1 TB HDD might have a hardware fault which is preventing access to its files. Have you tried running your MacBook Pro’s Apple Hardware Test, to see if it can detect a hardware-related problem with your external 1 TB HDD?

"input/output error' when making disc image from DVD

I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
This means I'm unable to copy the disc and then successfully install my Logic Studio.
Any ideas?

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

HT202174 In need to change from appleshare to mac os journaled disk format on my time capsule. How to proceed?

In need to change from appleshare to mac os journaled disk format on my time capsule. How to proceed?

No Time Capsule disk can be formatted other than the automatic system in the TC itself.. You simply select erase and it will reformat the drive.
If you are referring to a USB drive.. plugged into a Time Capsule.. you must plug it into your Mac and use Disk Utility.
However you do need to understand.. appleshare is not a disk format.. it is a partition scheme.. so when you pick the disk you need to change its partition to GUID.. this is nothing to do with Mac OS journaled format.. the two are distinctly different. Also Appleshare works fine for most people.. there really is no need to change.
Anyway here is how to do it.
I have sd card I can use as example. Click on the Partition Layout.. so you can choose something else.. notice it is presently set to Master Boot Record.. but is formatted Mac OS Extended Journaled.
When you change the partition layout Options at the bottom will become active and you can change the setting. Click Options.
Choose whichever. GUID is the current system for boot drives.
None of this is relevant to the internal disk of the Time Capsule.

Disk Utility - Input/Output error when creating disk image

Hello!
A few days ago I was unable to turn on my Macbook Pro, and was stuck on the white screen. I've been searching around quite a lot on this forum, and before I try fixing anything, I REALLY need to back-up my files! I just bought a 2TB hard-drive, which I have partitioned to GUID and Mac OS Extended (Journaled), (it perfectly works on another Mac).
I now want to attempt to create an image of my harddrive (Macintosh HD) onto my external drive (which is empty). I've tried doing this both in 'read-only' and in 'compressed', but about halfway through, I receive a message saying "Unable to create 04/2014 backup.dmg (Input/Output) error".
I saw on another similar post that I might want to install DiskDrill or DataRescue. I'm fairly sure this is impossible for me to do, since my screen is completely white, and I'm unable to access my desktop.
I can only access Disk Utility through pressing command+R when starting my computer. Hence, I need to successfully back up my files through Disk Utility...
I'm aware that my HD may be corrupted since this is happening, but there must be a way for me to put an image on my external HD?? A few days ago, when I clicked on Repair Disk it said "Impossible to repair: invalid node structure". But now, it says that "Macintosh HD appears to be OK". I have no idea what's changed... And I can still not start my computer past the white screen...
I'm very bad with IT and computers, and have extensively tried to fix this on my own, but I'm now stuck here, with this "input/output error"...!
Any suggestions would be greatly appreciated! Thank you!
PS: I do not have Applecare, this is an old computer from 2009.

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

Similar Messages

Maybe you are looking for