Restoring doesn't work correctly.

I have formatted it and I've changed the path. When I restore it, it still asks me to restore it. I have a black fifth Gen black 30 gig iPod video.
Any help would be awesome! I'm getting crazy music withdraws. >_<

Try disconnecting from the network and then change the drive letter on the iPod to something much higher, like M or P or Z, so long as they don't conflict with any network storage.
http://docs.info.apple.com/article.html?artnum=93499
And use a rear port on your computer.
Message was edited by: deggie

Similar Messages

  • Game Center doesn't work correctly

    Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
    It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
    Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
    The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
    I've restored my device several times, but it didn't help.
    How to solve it?

    I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
    There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
    Other than waiting for Apple to fix it I don't think there is a solution.

  • ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

    iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

    Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
    For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
    System:
    Windows 7 Ultimate x64
    iTunes 10.4
    ATI 5750 video card

  • AddChild doesn't work correctly in 11.9

    comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows  7 IE debug version and I see no script errors
    Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
    (Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

    Could you please open a new bug report on this over at bugbase.adobe.com?  When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally.  If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]). 
    Once added, please post back with the bug URL and I'll investigate internally.
     

  • IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

    iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

    It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
    report to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • After upgrade my iphone 4 to IOS6, sound doesn't work correctly

    After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
    During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Translation from CS5 to Cloud doesn't  work correct, navi and linked images are broken.

    Translation from CS5 to Cloud doesn't  work correct, <navi> and linked images are broken.
    The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

    Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
    This implies your site is not properly defined in DW.  Go to Site > Manage Sites.
    Or simply go to your other installation of DW and export the site definition file from Manage Sites.
    Save it to a flash stick or other removable drive.  Then import the STE file into your 2nd installation of  DW.
    Nancy O.

  • [svn] 4028: Bug: Draining of buffered messages doesn' t work correctly with long-polling.

    Revision: 4028
    Author: [email protected]
    Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
    Log Message:
    Bug: Draining of buffered messages doesn't work correctly with long-polling.
    QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
    Doc: No
    Checkintests: Pass.
    Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    Sounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems.  http://wiki.archlinux.org/index.php/CUPS
    The first section describes how to troubleshoot CUPS and printing problems.
    I've also found a few other posts and links that may help.
    http://hplipopensource.com/hplip-web/mo … eries.html
    http://ubuntuforums.org/showthread.php?t=419163
    Hope this helps!

  • HT1560 What if Factory Restore doesn't work?

    What if Factory Restore doesn't work?

    As a last ditch effort, try the following:
    Power off the AirPort for a few minutes
    Hold in the reset button first, and keep holding it in for another 10-12 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button after the hold period, and allow a full minute for the AirPort to restart
    At this point, the amber should be blinking slowly, and you should be able to reconfigure it again using AirPort Utility on your Mac
    If a factory default reset does not work, the AirPort is defective and will need to be replaced.

  • How can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    how can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    On your Mac, for duplicates, switching Contacts off then back on in System Preferences > iCloud may prevent duplicates.
    On the iPhone / iPad tap Settings > iCloud. Make sure Contacts and Calendars are swtiched on.
    Try restarting your Mac and your iOS devices when items won't sync as they should.
    To restart an iOS device:  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • ASR1002 - For DNS it seems that NAT doesn't work correctly

    Hi Folks,
    For DNS it seems that NAT doesn't work correctly
    The ASR 1002 works as a NAT-Router. But for DNS it seems that NAT doesn't work correctly.
    All DNS packets with a frame size greater than 512byte are not processed (they donїt arrive at the DNS Server), but we can't verify if they are dropped or just not processed.

    Sorry guys its everytime*

  • Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work

    Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work
    I tried to restore with ios 5.1.1, with ios 5.0.1 and with ios 4.1
    none is working

    Mcloulou34 wrote:
    Oh my god, it finally worked ! I restored on an old PC and it worked !
    Thanks anyway for your help.
    But allow me to extend to you a simple reflexion about the jailbreak (even if my iPhone wasn't... except if my little cousin jailbreaked without me noticing the advantages or disadvantages) : Would you refuse an alcoholic trying to go to rehab ? Would you really let someone trying to restore a cellular phone die without it, because he went on the bad side a couple of years ?
    Not a great analogy, but this is a user-to-user forum, and Apple will not allow discussion of jailbreaking; if someone tried to help with jailbreaking the message would be deleted. However, if you have a jailbroken phone Apple will generally not block a discussion of how to unjailbreak it. The only problem is that not all jailbroken phones can be restored successfully; it depends on the method of jailbreaking (which I can't discuss without THIS message being deleted).

  • HT4623 if the phone we are updating is locked how can we 6.1 to 5.0 and what if restoring doesn't work at all...

    if the phone we are updating is locked how can we 6.1 to 5.0 and what if restoring doesn't work at all...

    iTunes will only ever install the latest version of iOS for the device, in the case of the 3GS that is 6.1.

  • Link on my website doesn't work correctly on my iMac. It works correctly on Safari, and both browsers on my laptop.

    Link on my website doesn't work correctly on my iMac. It works okay when using Safari. It also works correctly on my laptop using either browser.

    We worked out my problem. My solution turned out to be: Firefox Preferences/Applications. Scroll down until you find "Portable Document Format (application)", click on it and use the dropdown menu to the right and changed "Save file" to "Use Adobe Acrobat Pro (default). I had trouble at first finding if the listing was under Adobe, Acrobat, or what so I used the search feature and found it immediately.
    Hope this helps.

  • Ipod not recognized and Restore doesn't work

    i have an ipod classic 160 GB, with disk mode enabled. When i connect it to the mac mini, it calls up iTunes. but then the message comes up that ipod can't be recognized. So i have restored it (using the latest updates, by connecting to the net) and then synced. During ejecting the ipod too, the proper procedure has been followed. However, at the end of all of it (i have 10000+ items in iTunes and it takes a LOOONG time to sync), when i try to use the disconnected ipod, it shows 'No Music', 'No Playlists', no this, no that...
    I have also gone thru some other posts in this forum which suggested methods (such as getting ipod into disk mode and then connecting, trashing ipod software updates and reinstalling), to try to rectify the problem but there has been no difference And BTW, now i check, ipod shows 92 GB free (of the 160 GB). so what been copied, and where is it? or is the flash drive corrupted?
    Pls HELP, as I need the ipod and my music
    BTW, I think that this problem has become more pronounced since I installed the latest iTunes update (7.6.1)

    Try this...
    *Checking hard-drive for errors*
    Hold Menu+Select on the iPod for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Run *Disk Utility / Repair Disk* for the iPod. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore.
    Once you've restored your iPod don't rush to dump all the data back exactly as it was before. Complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
    *Break up large transfers*
    In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos etc.
    tt2

Maybe you are looking for