Restoring Dreamweaver Sites

I'm recovering from a system crash. What I do have is a full
system backup from a couple of days before. What I don't have is a
manual backup of DW STE's to import my sites back in DW.
Can someone tell me where the "real" site definitions are
located for DW? I can restore from there.
Thanks!
Nathan

Not compatible with CS3, yet, and not on the Mac.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"AndyH" <[email protected]> wrote in message
news:fqhpq2$nbi$[email protected]..
> Nathan
> Its probably too late, but I was advised to use this
third party prog to
> backup site definitions etc..
>
>
http://mm-exporter.joexx.de/
>
> rgds andy
>
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:fqhl3g$ibq$[email protected]..
>> System Registry.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "NathanWeb" <[email protected]>
wrote in message
>> news:fqheip$bav$[email protected]..
>>> I'm recovering from a system crash. What I do
have is a full system
>>> backup from
>>> a couple of days before. What I don't have is a
manual backup of DW
>>> STE's to
>>> import my sites back in DW.
>>>
>>> Can someone tell me where the "real" site
definitions are located for
>>> DW? I
>>> can restore from there.
>>>
>>> Thanks!
>>> Nathan
>>>
>>
>
>

Similar Messages

How to restore a site deleted from SharePoint Designer 2010

Hi All,
I have opened a test server site in share point designer 2010, & deleted that particular site in SP designer 2010,can anyone let me know how to restore the site by using SharePoint Designer?
I followed below mentioned procedure to restore the site using SharePoint Designer
Open SharePoint Designer, File tab, Sites under File Tab, Open site, specified the URL of site,opened..
It is getting connected to the Organisation network & showing "path does not exist,check the path and try again".
Whether, Is it possible to restore the site deleted from share point designer in site collection recycle bin. or
Is it possible to copy the site from Production server to test server.
Waiting for an response at the earlier.
Thanks in Advance.
Badri

Hi Badri,
1.You could not restore site deleted from SharePoint designer in site collection, you can only restore the site deleted from
UI in site collection recycle bin, deleted from end user recycle bin.
2.You can export the site from production server, then import it to test server.
http://technet.microsoft.com/en-us/library/ff607895(v=office.14).aspx
Best Regards.
Kelly Chen
TechNet Community Support

How to include Aperture web gallery in dreamweaver site

With the demise of mobile me I need to find a way to keep my personal website photo albums (web galleries) that I currently publish via Aperture web gallery and then use a hyperlink from my Dreamweaver web site. This means visitors can view the photo's from a link button but the actual images they see are Aperture Web Galleries. This method has worked for me for a while now.
I know you can save a complete web gallery from Aperture onto a local drive rather than upload to mobile me. Does anyone know a beginners (ie me) guide to include that Aperture web gallery directly into a Dreamweaver site?. It feels like it should be possible but can't find any help.
thanks in advance.
Peter B.

Hello Peter,
What I do, to link my Aperture galleries to my iWeb pages, is to export the galleries from Aerture to my disk and then to upload them using ftp to a folder at my web hostings service. Then I link the iWeb pages to the gallery using link button or string. I use the free FTP program CyberDuck http://cyberduck.softonic.de/mac to copy the gallery using ftp. If your web hosting service allows ftp transfer, you could do the same. CyberDuck is really a smart little tool, but any program that allows ftp transfer would suffice.
Regards
Léonie

Managed Metadata appearing in wrong columns after Restoring a site to a new Site Collection

I've restored a site with some libraries that have Managed Metadata (MM) columns from one site collection into another site collection inside the same web app so it should all subscribe to the same Managed Metadata
Service Application.
There are two MM columns in one library, one holds a single value which is what type of document it is, the other is a general tag field that allows the user to add multiple MM values to it if they want.
What we've found is that data has randomly disappeared on some MM fields, on others it appears in the wrong column, and in other cases it appears fine.
I used native out of the box GUI backup and restored with the command line,
I've done it twice with the same result, so it’s not a one off corruption during backup. It's the same story in a different doc library based on different term sets as well.
Of all the things to not work properly, MM was probably last on my list to expect, it's knocked my confidence in it a bit, as well as worried me about future upgrades.
If anyone has any ideas over what may be the cause of this, it would be appreciated, I've read lots of blogs, but nothing quite like this has cropped up.
Thanks,
Jon

Most of the ISV offerings will allow you to 'Migrate' content from one SP location to another. I'm pretty sure AvePoint and a few others have tools specifically developed for shifting bits and pieces around SharePoint farms.
It is a limitation but the ISV tools tend to do a good job and maintain nearly full consistency.
There's scripts around that can do much/most of the migration and you could always extend them to do the same things as the ISV migration tools however the cost to do so can quickly get to the same ballpark as buying an already made tool.
Paul is also in the London office, we often work together when projects requiring his brains and my beauty crop up.

White square for .swf file in dreamweaver site

Hi
Apologies if this is a very basic question.
I have built a dreamweaver site and embedded a .swf file (a
slideshow of photos created in flash) into the page.
When I view the page online, the .swf file takes a few
seconds to load, and while it is loading I get a white square where
the slideshow should be (the dreamweaver and flash documents have a
black background).
Question - how do I either
a) get the white square to be black
b) get a loading bar to show that the flash video is loading
Many thanks

Thanks so much Tom - I now have a black background!
The only problem is that my .swf is taking ages (8-10sec) to
load and now its all the same it looks like nothing is happening!
I have looked at the preloader threads and customised a
preloader, but I can work out from the search results/threads what
to do with it.
How do i link the preloader into my .swf file. Do I need to
know actionscript (I dont!) to do this? (I have Studio 8)
The other gist I picked up from the threads is its better to
avoid the preloader all together. I'm creating a photography
website - hence big .swf - but do you have any hints for optimising
the .swf - the flash publish compression is all I've used so far
Many thanks

How to migrate a dreamweaver site from CS4 to CS6

I have a full site with design time and other information configured in Dreamweaver CS4. How can I migrate my entire CS4 site to CS6?
Jim

Hello James,
maybe it's too late now, but you could have a look here anyaway:
http://helpx.adobe.com/dreamweaver/using/import-export-dreamweaver-site-settings.html
Hans-Günter

In dreamweaver site-wide query option file grayed out

in dreamweaver site-wide query option file grayed out
Why won't this button option work, I cannot get the site-wide query to highlight, please help anyone, thanks.

You need to have a defined site in order for DW to correctly work with your files...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/
Once defined, you will always work from the Dreamweaver Files panel to ensure the program can manage your files correctly.

Saving web gallery to Dreamweaver site

I have created a web gallery in Adobe Bridge and incorporated it into my Dreamweaver site using an iFrame. When I preview the slide show in Bridge the slides are perfectly centered. When I preview the gallery in my site the slides are not centered. I will send a copy of the page.
Can you see what I need to do?
Thanks,
Pat

Hello Peter,
What I do, to link my Aperture galleries to my iWeb pages, is to export the galleries from Aerture to my disk and then to upload them using ftp to a folder at my web hostings service. Then I link the iWeb pages to the gallery using link button or string. I use the free FTP program CyberDuck http://cyberduck.softonic.de/mac to copy the gallery using ftp. If your web hosting service allows ftp transfer, you could do the same. CyberDuck is really a smart little tool, but any program that allows ftp transfer would suffice.
Regards
Léonie

Embed Adobe Bridge CS5.5 web image gallery into Dreamweaver site

Please help! I have been reading forums and trying to find the answers to my problem for days! I have created an image gallery in adobe bridge cs5.5 and have used an iframe to embed the gallery into my dreamweaver site. When I preview my site the gallery works, but after I've uploaded the gallery to the server the gallery no longer works. I have read multiple adobe forums with no success. Please help! Thanks!

I'm not sure I completely understand your problem, because linking to a Lightroom gallery is actually very simple.
Design your Lightroom gallery and upload it to your server. Just do it directly from LR. Let's suppose you have uploaded it into [your webroot folder]/galleries/test/.
Don't rename any of the index files.
Check it has actually worked, by visiting http://celestialapple.zxq.net/galleries/test/index.html with your browser.
Create a link to the gallery on your home page. The source code for the link is <a href="/galleries/test/index.html">Other Photoshop gallery</a>
And that's it already.
Cheers,
Michael

Trying to add a Word Press blog to my Dreamweaver site through a linked tab... is it possible?

Trying to add a Word Press blog to my Dreamweaver site through a linked tab... is it possible? My client wants a blog on his website that I am curently creating in Dreamweaver and I am clueless on how to manually create one using a DB... so is it possible to use a menubar link to go to a wordpress page that would contain the blog? Please help.
Thanks,
TIffany

Be sure to install WP files inside a separate folder on the domain.
yourdomain.com/blog/wp
http://codex.wordpress.org/Installing_WordPress
Link to blog:
<a href="http://yourdomain.com/blog/wp/index.php">Link to Blog</a>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Trying to add Google Analytics to Dreamweaver site, not working

I had Google Analytics set up on my dreamweaver site and all of a sudden it stopped reporting data. A co-worker who no longer works here was working on the page to fix some non-relevant errors and as a result Google Analytics stopped working. The strange thing is I had it pasted on every page of our site and nothing is reporting data. It is reporting a syntax error on line x...but I am unaware what and how to fix that. Help?

You're not giving us much to go on. Go to your Google WebMaster account & grab the GA tracking code. Re-insert it into some test pages. Analytics reporting may not show anything for several days.
Nancy O.

Edge animation-images are not displayed on my dreamweaver-site

Hello, could someone please help me?
My animation, which is inserted into a Dreamweaver-website, shows no pictures - only text elements when you open the page in the browser. In the live view and preview in the browser the images are displayed but on the Website they are not display. I have already set the file permissions to 777 - but it did not help.
When i open the Animation without my Dreamweaver-site - only the Animation in the browser the Images are displayed correctly.

I've just found the error! One file was not uploaded... sorry ! Anyway thanks for the quick reply!!!

Have existing Dreamweaver site want to publish new Muse site into it

I have developed a web site and managed it in Dreamweaver I would like to put new pages including index page from Muse into this Dreamweaver site and from the new index (Muse) link it to the old Index Page (Dreamweaver) so there will be access to all the old areas.
Do I just lay all the the new HTML export into the old sites folder and How do I link the new index page to the old index page with the same name Index?

Hello,
As such there's no option to import the live pages into Muse and work on them. This is because Muse will only allow opening files with extension as .muse for editing purposes. If you publish to the site from Muse directly then the older content would be replaced completely.
You can however, create the page in Muse, and then export the contents using the File -> Export As HTML option and use Dw to edit the code as per your requirement. This, although not exactly what you need, is a suitable option to retain both the older and the newer contents.
Cheers
Parikshit

Inspect or check IE7, IE8, and IE9 Dreamweaver sites on my mac?

Hi. Apart from using Parellels, Virtual PC, buying Windows 7, etc, is there a free way to inspect or check my dreameaver site in internet explorer while on my apple mac or macbook? Doesn't Adobe have some way of letting mac users check IE compatibility with CS5 dreamweaver sites?
CS5, CS5.5
Macbook 10.5, Macbook 10.6, Macbook 10.7
Thanks!!!

Hi jaynew16,
I'm a little hesitant to answer this because it almost seems like a trick question You posted this in the forum for Adobe BrowserLab, a web-based tool for cross-browser webpage compatibility testing. There is currently no charge for using it, and you should be able to test any public webpage by doing the following:
Go to https://browserlab.adobe.com
Register with your Adobe ID
Click on Browser Sets and choose which browsers you want to test
Click on Test and enter your URL into the entry field
Press Enter and screenshots of your URL will be returned which you can view singly, side-by-side, or overlaid
If your site isn't public, we offer Dreamweaver and Firefox integration pieces that allow you to test pages behind your firewall. Turn on the extension in Dreamweaver by going to Window > Extensions and selecting Adobe BrowserLab. Make sure your version of Dreamweaver has all the latest updates, and you should be good to go for testing pages directly from your machine.
Let me know if you have any further questions,
Mark

Backup and Restore My Sites

Hi,
I was hoping for a bit of clarity regarding this topic.
As I understand it, there are two sides of MySites, the Site Collections that are created through self-service site creation for users content, and then service application that provisions the site profiles.
For site profiles, I believe that the Farm Backup and Restore procedure in Central Administration takes care of this, and a backup and restore can be done by selecting the service application in the long list of tick boxes available in the Farm Backup options.
Please correct me if I'm wrong.
For the Site Collections, as far as I can tell, you can either back them up individually using the SharePoint native backup tool (not feasible for thousands of site collections), backup the content db using SQL backup, or Powershell. As far as I can tell,
this has the limitation of only allowing you to backup and restore ALL sites collections at once, not individual site collections. Is this correct?
If so, is there a way of backing up the site collections so that an individual site collection can be restored should it be required, without having to painstakingly backup all the site collections individually? I didn't know if there was a script for this
or failing that a 3rd party tool.
Any thoughts and input would be much appreciated.

Re: SQL backups, yes. When you attach the content database it attaches all the site collections in the database.
There is no out of the box method to restore individual site collections unless you perform individual site collection backups. You can automate this with PowerShell.
Something like this would work:
$mysites = Get-SPSite -Webapplication "My Sites"
$Path = "\\path\to\place\backups\"
foreach ($site in $mysite) {
$filename = $($site.ServerRelativeUrl -replace "/", "_") + ".bak"
Backup-SPSite -Identity $site -Path $($Path + $filename)
This creates a site collection backup of every site collection in the My Sites Webapplication (you could customize this as necessary for your environment). Note that it replaces forward slashes ("/") in the site collection URL with underscores
("_") as you can't have the slashes in a filename.
This is a quick and dirty script as well. You'd probably want to add outputs or set the site locks, or whatever.
Alternatively, most third-party SharePoint backup solutions offer more granulated restore options -- with a single backup you can restore everything that an OOB backup would contain, plus you can get lower within the content -- so site collections, sites,
lists, libraries, items, documents.
Jason Warren
Infrastructure Architect
Habanero Consulting Group
habaneroconsulting.com/blog

Restoring Dreamweaver Sites

Similar Messages

Maybe you are looking for