Restoring IPhone in Recovery mode
I'm trying to restore my iphone because it said I can not receive or make any calls and I need to restore it because it's in recovery mode (no idea on what that means). So iI began the process of restoring it. It "extracts software" but then the iphone just disconnects. The USB did not unplug or come out, the computer didn't shut down, etc. It just goes black as though the phone turns off and the process stops. When the warning sign about it disconnecting goes away, it reconnects again all of a sudden and says I need to restart. Could you explain to me why it's telling me I can't receive or make calls and in "recovery mode" and how I can fix my connection problem? THANK YOU!!!!
I've tried restarting my computer and my phone doesn't turn on completely. Just goes to the apple logo then shuts off.
You need to restore the iPhone before you can make calls.
iPhone and iPod touch: Unable to update or restore
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Similar Messages
-
TS2529 how to to restore iPhone from recovery mode
how to to restore iPhone from recovery mode
I Have the same problem. When i try to restore it gives me this error.
-
HT1414 RESTORING IPHONE IN RECOVERY MODE
HOW DO I RESTORE MY PHONE IN RECOVERY MODE.... THERE IS SOMETHING YOU DO BY HOLDING HOME AND OFF BUTTON AT THE SAME TIME?
are you referring to dfu mode? I'd only use that if a standard recovery didn't work for some reason. It's more art than science so you may have to try it a few times...but here is the method I've found to work best:
DFU mode[1] is a state that you can put your iPhone into where it can interface with iTunes but does not load the iPhone operating system or boot loader (this is what really differs DFU mode from recovery mode). DFU stands for Device Firmware Update.
While connected to PC, running iTunes, hold down Home and Power( button on upper right edge) button for exactly 8 seconds.
Release the power button. Continue to hold home button. Restore message will appear in iTunes. Release home button. The device will be recognized by iTunes, but no display will appear on the device itself. The lack of a display on the device will verify that it is in dfu mode.
[1] http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
You can also refer to this kb, prior to trying dfu mode
http://support.apple.com/kb/HT1808 -
Cant restore iphone in recovery mode
Hi guys
so ill go from the start
Today i changed my password from 3573 to 1335 so my mate wouldnt get in. after i changed it back to 3573. later today i tried to get into and it wouldnt work so now im trying to recover. I cannot recover however. ive tried resotring from backup, that doesnt work, im currently in recovery mode but cannot restore as i keep getting error 3194. and ive tried everything ive seen to fix this and i cant so im basically stuck in recovery mode. can someone help me?
btw i have NOT jailbroken this deviceIf your phone is running modified software, we can't help you here, due to the Terms of Use in these discussions. Error 14 is covered here: http://support.apple.com/kb/TS3694#error14
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues -
TS1538 RESTORING IPHONE IN RECOVERY MODE
HOW DO I RESTORE MY PHONE IN RECOVERY MODE.... THERE IS SOMETHING YOU DO BY HOLDING HOME AND OFF BUTTON AT THE SAME TIME?
Recovery Modehttp://support.apple.com/kb/HT1808
-
TS3694 RESTORING IPHONE IN RECOVERY MODE
im trying to update my iphone 4s software to i06 and the download always stops 1/4 of the way and it comes up with a message... unable to update... error 3004.. its so frustrating... please help!!
Hi poppymoo,
Thanks for using Apple Support Communities. I recommend trying the steps pertinent to error 3004 from this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
Test restoring while connected to a known-good network.
If you're using a Mac, this section may also help:
Error 3004: If you're using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command in the command line: dscacheutil -flushcache.
Cheers,
- Ari -
HT4623 RESTORING IPHONE IN RECOVERY MODE
im trying to update my iphone 4s software to i06 and the download always stops 1/4 of the way and it comes up with a message... unable to update... error 3259.. its so frustrating... please help!!
You might like to try rebooting the phone by holding down the Home Button and the Power button at the same time for about 5 secs on until the screen blacks out. You should then see the Apple Logo until the phone restarts.
So long as the phone is still functional you can always do a "Factory Reset" as a last resort. This will erase everything from your iPhone so you will need a local backup otherwise you will need to set up like a new phone.
Is this an iPhone 5 ?
Oh, and one other thing is your iPhone backed up to your computer or to iCloud? -
HT1414 'Restore iPhone in Recovery' iPhone 4 has lost all my music.
After following the 'Restore iPhone in Recovery mode' instructions and resettiong all setting my iPhone 4 has lost all my music. It is in ICloud on home Mac desktop but cannot find how to re import it to my phone. Please help.
Thanks but...umm.. Its on the home Mac all 203 songs, now it says I have just 50??? tries to download, then says that it can't download each song, moves on to next..unable to down load and so on and so forth.them .
Itunes Library just has a search bar... to buy music.... how do I sync? Thought that I had... thats why icloud/library had all the songs... -
iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed...
my phone wont open, i can't even turn the power on.
what to do? pls help
(iphone 4 and iphone 4s)So I just did this on my iPhone 4 and it worked like a charm it unlocked it immediately. My phone was put into recovery mode and I know that not all data is deleted it just puts the phone into a sort of hibernation in order for the files to stay uncorrupted. I went to http://www.recovery-ipad.com/iphone-stuck-in-recovery-mode.html downloaded the software it unlocked my phone in a matter of minutes. Calls, messages, photos, apps, and voicemail was all there as if it never happened If you leave it unregistered you don't have to pay for it works for either windows or mac. Hope this helps!
-
i started to update my iphone 4, and in the middle of the update, an icon popped up saying that "iTunes has detected an iPhone in recovery mode. you must restore this iPhone before it can be sued with iTunes."
I really cannot lose the data on my phone. i foolishly did not back up everything ecause there was a previous problem i had with icloud and i needed to delete all of my icloud accounts accept for my contacts.
WHat would i lose if i restored it? and do i need to restore it?
is there another way? if there is, i definetely do not need the update. someone please help me.First, in iTunes, launch Preferences and go to the Devices tab. Check the date and time of the last backup. If it is recent you can restore it. However, if you mean you have the photos back in your Camera Roll then the backup was already restored. To get your music and apps back it should just be necessary to click "Sync".
-
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed... my phone wont open, i can't even turn the power on.what to do? pls help
So I just did this on my iPhone 4 and it worked like a charm it unlocked it immediately. My phone was put into recovery mode and I know that not all data is deleted it just puts the phone into a sort of hibernation in order for the files to stay uncorrupted. I went to http://www.recovery-ipad.com/iphone-stuck-in-recovery-mode.html downloaded the software it unlocked my phone in a matter of minutes. Calls, messages, photos, apps, and voicemail was all there as if it never happened If you leave it unregistered you don't have to pay for it works for either windows or mac. Hope this helps!
-
During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.
Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
when I power on it shows go itune logo starts. Then I tried to download restore and update it shows Tunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then an unknown error occuired(1604) shows.an unknown error occuired(1604). Please help me and how can I restore the phone OS. Regards
It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.
Maybe you are looking for
-
When attempting to delete a VHD's blob you may receive the following error: There is currently a lease on the blob and no lease ID was specified in the request While these errors are expected if a VHD is still registered as a disk or image in the por
-
How to UnLock the object in Integration Repository of XI.
Hi Experts, when i try to edit the object in IR, i am getting following message. Object Message Mapping EmpResponce_MM | urn:pas.com/neh currently being edited by user 9SGRANDHI. Note: it is saying my ID itself, i logged off and logged in, still its
-
There's a lock next to my iPod? Help me?
I have no idea what happened, but I need serious help...please. Last night a friend of mine decided to just plug her iPod into my computer and I have no idea what she did and everything has been horribly messed up since. I resent my ipod, and I unins
-
[svn:fx-trunk] 12545: flash-integration. swc is no longer built in to utilities.swc.
Revision: 12545 Revision: 12545 Author: [email protected] Date: 2009-12-04 11:31:50 -0800 (Fri, 04 Dec 2009) Log Message: flash-integration.swc is no longer built in to utilities.swc. It is now it's own standalone swc that needs to be packaged
-
How to know username and password from existing PPPOE broadband connection?
Hi All, I am using windows server 2008 R2, and now I've used PPPOE broadband connection to connect the internet. what I am asking is how to know the username and password from my PPPOE setting, I have the requirement to create same setting in the dif