Restoring lost calendar using TM with new MobileMe calendar sync enabled

I have several Macs set to sync my calendars using the new MobileMe calendar.
I accidentally deleted an entire calendar, and it has now been deleted from all computers as well as MobileMe.
I have a Time Machine backup of one of the computers.
Can I simply restore ~/Library/Calendars from the TM backup and have everything sync through MobileMe properly again?
I know the procedure for backing up calendars has changed for people using the new MM calendar, and am afraid that change may also break the old TM restore procedure for iCal...

BusyMac has all the info you need about this and it isn't great news.

Similar Messages

If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space, I mean I have to delete mu hard drive but how I keep my previous information on time machine and keep using to with new information?

If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space [externak hard drive], I mean I have to delete my hard drive but how I keep my previous information on time machine and keep using it with new information?

Time Machine does not provide archival storage.
If you delete a file from your disk it will eventually be deleted from your TM backup without any notice to you.
You need a second external disk to use for archival storage.
You also need a third disk for backups of the second disk.

How to restore a table using RMAN with previous backup ?

Hi everyone,
we have to restore a table from 1 week previous backup using RMAN.
Could you show me how to restore a table using RMAN with previous full backup.
please Help me out.
Thanks
Info > oracle 10g, OS: AIX5L

Hi,
first of all you must have all the archivelogs since you want to recover your table from the previous backups.
anyways if you want to recover your table then you need to perform incomplete recovery to the point where you loss the table for that you need to restore and recover your database.you likely to loose all the transcation which occurs to the point where you you loose your table.
thanks..

My iphone4 has been stuck on the connect to itunes logo for a few hours.I connect it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes.I'm afraid that if I restore it I will loose everything help

My iphone4 has been stuck on the connect to itunes logo for a few hours. I connected it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes. I'm afraid that if I restore it I will loose everything help please!!

AT this point whatever data you have on yoru phone is already gone since it is in recovery mode.
However you can restore from your backup, when your phone reboots from recovery.
YOu do have a backup right?

After itunes finishes restoring my ipod touch 8gb, itunes still says itunes has detected an ipod touch recovery mode. You must restore it before using it with itunes. and i dont knwo what to do

after itunes finishes restoring my ipod touch 8gb, itunes still says itunes has detected an ipod touch recovery mode. You must restore it before using it with itunes. and i dont know what to do

Are you sure it is 1043? I've never seen that error before. But you can try disabling your security software, connecting the phone to a USB port directly on the computer (not a hub), and trying to restore again.

Restore lost calendar

How do I restore lost calendar information?

I am missing all the calndars I created just on my MacBook Pro. This happened when I got an iPad Mini and I was trying to sync everything via iCloud. I finally got Contacts figured out, but as I was trying to sync it all, my calendars have disappeared. I can't find a place to enable or disable any calendars from view.

How to sync Google Calendar with new MobileMe?

I have been using BusySync on my MacBook Pro to sync iCal to a Google calendar. I will have to migrate to the new MobileMe in May and I understand that my iCal calendar (as a local calendar) will no longer sync via MobileMe. Is there a way to sync a MobileMe calendar with a Google calendar so that all my Apple devices are synced with the Google calendar?

BusyMac has all the info you need about this and it isn't great news.

Problems Using Viber with new iPhone 4S

When I try and use VIber with my new iPhone is says push notifications are not enabled, even though I've enabled them. I've also tried deleting and reinstalling viber several times, along with restarting the phone. Is anyone else having the same problem and does anyone have any suggestions of something else I could do?

Hi,
This is a member of Viber's development team.
@libbyfromchristchurch - Please check: http://helpme.viber.com/index.php?/Knowledgebase/Article/View/38/0/push-notifica tions-for-iphone---how-to-enable
@quyenfromseattle - This is a known issue which will be resolved shortly. Make sure that you stay current with our version updates.
It may help to change 'banners' to 'alerts' on Viber's Push Notification settings as a temporary workaround.
Thank you for your patience!

Power unit from older MacBook Pro - using it with newer model

I once had a MacBook Pro, one of the early version, bought somewhere in August 2006. Now I have the power unit that is left from it. I want to use it with my current MacBook Pro which is newer model, but not the one which is currently sold - it is NOT the unibody model, it looks exactly like the previous model, but with better spec, and the notable difference is that on the previous model the green diode near camera had a single hole, and the newer model has lots of tiny miniholes there, which makes it completely invisible unless the diode is lit.
(unfortunately I have no idea how to identify those two models more correctly - model numbers or whatever)
When I compare the power units - the one which I have with my current model, and the one which is left from the previous, the newer is a bit smaller, and the power output markings are a bit differently organised, not totally identical, but they show what I understand is same voltage/amperage.
I'm still a bit cautious about using the power unit from the older model. Did anyone tried it, is it safe?

Next time you can use Mactracker to identify your machines exactly:
http://www.mactracker.ca/
Go to >About this Mac>More Info and you will see the Model Name and Model Identifier.
Good luck!

Tape lables for old used tapes with new barcodes

Hi All,
We are having some old used tapes ,
For those tapes I have giving an new bar codes and ran an inventory form library it is fine and detected with new barcode.
But when I am running in legato then it is detecting as old volume name .
So, I have deleted the old volume and tried to labeled it with the new bar code even then also it is asking overwrite the RAW017 Volume . Like this message it is giving.
Kindly help me in this.......
Thanks in Advance..................

I think I got a solution For this ---
Just I created a new pool and I tried to label that old tape with replaced bar code into this pool.
Then it has labeled as the bar Code mentioned.
and then I relabeled into the pool in which I require that particular tape to be used .
Now that old tape with required bar code it is working fine in required pool.
Thanks for your valuable suggestions..........

Noise when using headphones with new Lumia 630

I've got a new Lumia 630 today and when I tried to use headphones with it at first phone did not recognize them ( I still have to reconnect them sometimes) but the main problem is a hiss noise when phone produces sounds. It could be music, video or keyboard clicks, whatever. I can hear it even when loudness of music player is set to 0. Is it known issue? Or is it problem with my phone? I tried another headphones and have the same problem, maybe a less noise.
Sorry for my English. Need your help!

Hi wtfwithmyphone,
Welcome to the forum!
Does it only happen when using the phone with headsets? Do you also hear this noise when the audio is played via loudspeaker? What are the models of the headsets that you tried with your Nokia Lumia 630?
Note that the Nokia Lumia 630 supports headsets that have American Headset Jack (AHJ) ports. Using other types of headsets may cause performance issues, like background noise and audio quality distortion. This link will show you some of the headset models supported by the Lumia 630: Accessories for Lumia 630 - Headsets.
Let us know if this information has helped you.

Restore lost calendars

I lost all of my work Icloud Calendars twice over the past ten days. Is it possible to restore our calendars data once they have been lost?

Try this:
Quit iCal. Go to Macintosh HD > your username > Library > Calenders, and see if you have any folders and files in there. If you have items in there, your data might not be lost.
Go to Macintosh HD > your username > Library > Preferences > and remove the file com.apple.iCal.plist to the desktop. Restart iCal. If your data is restored, you're good to go. If not, quit iCal and return ther file back to it's original place.
Good luck.

Want to use printer with new laptop wont go hp officejet 4500

want to use my existing printer with new lap top says needs a driver went to hp screen and its says doesn't recognize printer hp officejet 4500

aacosta,
Welcome to the HP Forum.
You need software installed on your computer to use all the advanced features of the printer.
Select your printer HP Officejet 4500 All-in-One Printer Series
Drivers control hardware connected to the computer (wired or wireless)
Software controls the programs that interact with the User
General Installation Instructions
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Next:
If available, you may wish to download the Print and Scan Doctor and / or other programs from Category – Utilities
HINT:
Install the Utilities / Tools first; the little installation packages are smaller in size
· If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
On the bottom half of the main webpage for your printer, you can find helpful videos to assist with the installation.
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: If the printer supports Ethernet, you may connect the printer to the network (and assign the printer an IP address at the router, if you like). Once the printer is connected to the network, be sure the printer is turned on and then install the printer software.
After the initial installation is complete and working, be sure to check for and install any relevant updates - check Category - Update
There is valuable information at the printer’s website, including manuals, how-to pages, and alerts for your printer. Be sure to take an extended look at what’s available. Bookmark the page.
Extra help for setting up your Wireless Printer:
Reconfiguring your printer
Replacing your wireless router
Troubleshooting Your Printer – Wireless Network
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Nokia N80 with NEW Firmware wont sync with PC Suit...

Hello everyone
i have my Nokia N80 on 02 network
i upgraded the old firmware to the new 4.0623 firmware without any problems at all...
now when i connect to latest version of PC Suite via bluetooth, which used to work fine with the old firmware..
PC Suite says its connected via bluetooth, but when you go to contacts, and then try tp UPDATE them, it just searches for over 15 minutes, and nothing happens..
have done everything i can, and nothing works!
why doesnt it work with new firmware?
even when i try and SYNC the phone with PC suite, it is having none of it! whats going on?

have you tried to syncronise with PC sync to see if the sync overall is in order in PC Suite.
Sometime the PC Sync might work, but the contacts folder sync in Nokia Phone Browser has zillion reasons to be stuck since it is Windwows Explorer inbedded.
By tryibg to use PC Sync you can narrow down the reasons what can go wrong

Ical not syncing with new mobileme ical calendar

Morning All
I have been using mobileme now for sometime and i have not encounted any sync problems until recently.
The problem has started since i have upgraded the ical calendar in mobileme, i can sync my iphone with mobileme ical but ical on my mac will not sync with the new calendar on mobile me.
i am not sure what i am doing wrong any help would be much appreciated.

The exact same thing happened to me. Everything is seamless before the calendar upgrade, now after the upgrade MobileMe is not worth paying a dime for. The web-based calendar and devices seem totally disconnected from the iCal and Entourage.
I tried everything there is to be done and nothing worked

Restoring lost calendar using TM with new MobileMe calendar sync enabled

Similar Messages

Maybe you are looking for