Restoring offline log file
Dear Friends,
I am facing problem to restore last backuped offline log file.
I have succefully completed homogeneous system copy (i.e. SAP ECC 6.0 with Oracle 10g on Wndows 2003 platform) through backup/restore procedure & system comes to consistent stage & able to login properly.
Now I want to restore other offline redolog files in the above system.
e.g. Previously I have imported log sequence upto 750. Now I want to recover logfiles from log seq. 751 onwards.
Pls. help to recover other offline log files after system is consistent.
Thanks in advance,
Abhishek
Not possible.
Once you opened your database (and logged in successfully), no more recover actions can be done.
Similar Messages
-
Restore Backup log file back SID .log and be*****.ant
Dear all,
I have to restore sap oracle online backup from source server to target server. We have taken the backup of source server on tape. Now we have to restore that tape backup on target server. We don't have back<SID>.log and be*****.ant with us.
How can we restore the back<SID>.log and be****.ant tape first by which we can start the restore online backup on target server or without this back<SID>.log and be****.ant can we restore the backup on other location ( which i tried but not working, it is asking for back<SID>.log file.
Thanks
WardHi Ward,
As long as you have complete oracle datafiles, restore without logfiles can be done.
1. As a precauition, copy all /oracle/<SID> to a safe place during offline state (SAP down, Oracle down)
2. Replace each datafile from tape to the current datafile location. e.g /tape/sr3.data1 -> /oracle/<SID>/sapdata1/sr3_1/sr3.data1
3. Make sure that archive logs is complete from the point where you start online backup.
4. sqlplus /nolog
5. startup mount
6. You will likely found error with controlfile. Replace all oracle controlfiles from tape backup, then repeat the startup
7. recover database until cancel using backup controlfile
8. choose the archive where you want the point of restore
Good luck -
Hello everybody,
Do you know how it is possible to restore the brbackup log file with brrestore in the case where this file has been removed at the filesystem level ?
In fact, this file (named *.aff) is mandatory by brrestore option -b. But, if this file no longer exists, what to do ?
Thank for your help...
Daniel OuinThe backup is made by brbackup.
The result of brbackup is logged is a file *.aff.
So, brbackup backups this file at the end of the backup session.
If the disk is lost, we no longer have any .aff file to give as -b parameter of the tool brrestore.
In that case, we cannot restore any file.
Is there a way to run brrestore or any other br* tool without giving this file as parameter ?
Daniel -
While Recovery log files are not displayed in recovery mode
Hi Folks,
These days i am performing backup recovery testing for maxdb.
Maxdb 7.7
I am having one doubt please help me out to clear that.
Scenario is like this:
I have taken a complete Data Backup.
After that some data inserted and one log file created .Some transaction's are in log area (Online Logs) not written to the log file(Offline logs).
When i am performing recovery using recovery mode in that mode it is not showing the log files those are required to be restored at the time of recovery.
[recovery_mode|http://www.freeuploadimages.org/images/fdsnjrndfbr9ftfnco9.jpg]
After recovery it is showing me the data as it was their before the recovery.
When i am going with recovery with initialization option in that it is showing the logs those will be restored while performing the recovery.
[recovery_with_initilization|http://www.freeuploadimages.org/images/emupbqyhfunqe9q00yd3.jpg]
After recovery with initialization it had recovered until it found the data in logs.
My doubt is why in recovery mode it is not showing the log file's those are required to be recovered as it is showing in case of recovery with initialization.
In Recovery mode is it not recovering from the offline log files.....?
If yes than from where it is restoring the data inserted in DB after the complete backup.
As per my understanding in recovery mode it will perform recovery in the below steps.(Increment backup's i am not taking)
1.Complete Data Recovery.
2.All the log files will be applied.(Offline logfile)
*3.Log's available in the Log Area will be applied.(Online Log file) *
Regards,
Sahil Garg
Edited by: sahil garg on Feb 26, 2011 9:03 PMHello Sahil,
please check the documentation and the expert sessions before trying out this stuff.
The reason for MaxDB not asking for any log backups after you've modified a few records is, that we don't throw away the log data when a log backup is made.
Instead we keep track of which log information is still available for recovery in the log area and use this during recovery, instead of trying to get the data from the log backup.
As soon as the log data is lost (because it's overwritten or the log area was deleted as it is the case for a recovery with initialization) MaxDB of course has to ask for the log backups - and it does so.
But really - go and check the documentation and the expert sessions (maybe also my own blogs on this topic) about this.
regards,
Lars -
Restoring archive log after cold backup
Hello forums users,
I read many thing on this topic but I didn't find the good answer.
I performed a cold backup each sunday.
My database is in ARCHIVE LOG mode.
Is it possible to restore ARCHIVE LOG files after restoring COLD backup?
Sunday : cold backup
Monday : new archive log have been created since cold backup
Tuesday : same as Monday
Wednesday : I would like to restore to Monday 22:00 for example
Can I restore cold backup + apply archive log until Monday 22:00 ?
Regards,
Guillaumerecover database using backup controlfile until cancel|time|logseq|scn
will do this and prompt you for the archivelogs.
Known as 'incomplete recovery'
Hth
Sybrand Bakker
Senior Oracle DBA -
Log files can be applied after an offline backup is restored?
When reading the Admin Guide I see above possibility.
I guess in that case the offline backup must be done in the Database Maintenance Mode: QUIESCE.
I think if the offline backup is done after the DB is shutdown, no log files can be applied.
Would you please confirm and share your experience on this?
Thanks a lot!Hi Jennifer,
only to complete the answer of Jens, or "say" it less complex:
1.) Yes you could roll forward an offline backup. DB2 always end in rollforward pending state after a restore independent of the backup type (online | offline). In case of an offline backup you could complete the restore without logs, otherwise not.
2.) The offline backup is done in a special mode, it is neither online nor quiesced. Nobody can log on to the database as long the offline backup is running. To start the offline backup, you have to deactivate the database as described by Jens.
Best regards
Ralph -
How restore Archive log from one unix server to another server and how analyses witch archive log resore after online backup
kaviI have restore full online backup then offline archive log
BR0280I BRRECOVER time stamp: 2010-07-15 07.30.06
BR0657I Input menu 134 - please check/enter input values
Applying archivelog files to database PRD
1 - Archivelog directory (archive_dir) ....... [/oracle/PRD/oraarch]
2 # Instance of archivelog thread (instance) . []
3 ~ Apply from redolog group (apply_redo) .... []
4 - First sequence number (first_seq) ........ [38055]
5 - Last sequence number (last_seq) .......... [38084]
6 ~ Last system change number (last_scn) ..... []
7 ~ End point-in-time (end_pit) .............. []
8 - Use backup control file (back_ctl) ....... [no]
9 ~ Parallel recovery (degree) ............... []
10 - SQLPLUS command (command) ................ [recover from '/oracle/PRD/oraarch' dat
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRRECOVER time stamp: 2010-07-15 07.30.10
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0783I Archivelog files with sequence number 38055-38084 of database instance PRD will
BR0280I BRRECOVER time stamp: 2010-07-15 07.30.10
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRRECOVER time stamp: 2010-07-15 07.30.12
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRECOVER time stamp: 2010-07-15 07.30.12
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38055_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38056_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38057_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38058_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38059_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38060_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38061_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38062_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38063_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38064_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38065_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38066_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38067_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38068_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38069_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38070_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38071_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38072_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38073_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38074_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38075_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38076_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38077_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38078_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38079_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38080_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38081_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38082_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38083_637623713.dbf
BR0336I Applying offline redo log file /oracle/PRD/oraarch/PRDarch1_38084_637623713.dbf
BR0278E Command output of '/oracle/PRD/102_64/bin/sqlplus':
SQL*Plus: Release 10.2.0.2.0 - Production on Thu Jul 15 07:30:12 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> Connected.
SQL>
SQL> SQL> ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SQL> SP2-0734: unknown command beginning "/oracle/PR..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
SQL> startup
ORACLE instance started.
Total System Global Area 4714397696 bytes
Fixed Size 2050336 bytes
Variable Size 2365589216 bytes
Database Buffers 2332033024 bytes
Redo Buffers 14725120 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 337067467 generated at 07/14/2010 09:56:10 needed for thread
1
ORA-00289: suggestion : /oracle/PRD/oraarch/PRDarch1_38055_637623713.dbf
ORA-00280: change 337067467 for thread 1 is in sequence #38055
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 337067467 generated at 07/14/2010 09:56:10 needed for thread
1
ORA-00289: suggestion : /oracle/PRD/oraarch/PRDarch1_38055_637623713.dbf
ORA-00280: change 337067467 for thread 1 is in sequence #38055
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00279: change 337080381 generated at 07/14/2010 10:21:14 needed for thread
1
ORA-00289: suggestion : /oracle/PRD/oraarch/PRDarch1_38056_637623713.dbf
ORA-00280: change 337080381 for thread 1 is in sequence #38056
ORA-00278: log file '/oracle/PRD/oraarch/PRDarch1_38055_637623713.dbf' no
longer needed for this recovery
ORA-00279: change 337092700 generated at 07/14/2010 10:34:19 needed for thread
1
ORA-00289: suggestion : /oracle/PRD/oraarch/PRDarch1_38057_637623713.dbf
ORA-00280: change 337092700 for thread 1 is in sequence #38057
ORA-00278: log file '/oracle/PRD/oraarch/PRDarch1_38056_637623713.dbf' no
longer needed for this recovery
ORA-00279: change 337101635 generated at 07/14/2010 10:36:42 needed for thread
1
ORA-00289: suggestion : /oracle/PRD/oraarch/PRDarch1_38058_637623713.dbf
ORA-00280: change 337101635 for thread 1 is in sequence #38058
ORA-00278: log file '/oracle/PRD/oraarch/PRDarch1_38057_637623713.dbf' no
longer needed for this recovery
ORA-00279: change 337110148 generated at 07/14/2010 10:38:59 needed for thread
How start my orackle -
Transaction log shipping restore with standby failed: log file corrupted
Restore transaction log failed and I get this error: for only 04 no of database in same SQL server, renaming are working fine.
Date
9/10/2014 6:09:27 AM
Log
Job History (LSRestore_DATA_TPSSYS)
Step ID
1
Server
DATADR
Job Name
LSRestore_DATA_TPSSYS
Step Name
Log shipping restore log job step.
Duration
00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted
0
Message
2014-09-10 06:09:30.37 *** Error: Could not apply log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' to secondary database 'TPSSYS'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: An error occurred while processing the log for database 'TPSSYS'.
If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'TPSSYS' (13:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
Processed 0 pages for database 'TPSSYS', file 'TPSSYS' on file 1.
Processed 1 pages for database 'TPSSYS', file 'TPSSYS_log' on file 1.(.Net SqlClient Data Provider) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Skipping log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' for secondary database 'TPSSYS' because the file could not be verified.
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Deleting old log backup files. Primary Database: 'TPSSYS'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 The restore operation completed with errors. Secondary ID: 'dd25135a-24dd-4642-83d2-424f29e9e04c'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.38 ----- END OF TRANSACTION LOG RESTORE
Exit Status: 1 (Error)I Have restore the database to new server and check with new log shipping but its give this same error again, If it is network issue i believe issue need to occur on every database in that server with log shipping configuration
error :
Message
2014-09-12 10:50:03.18 *** Error: Could not apply log backup file 'E:\LsSecondery\EAPDAT\EAPDAT_20140912051511.trn' to secondary database 'EAPDAT'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-12 10:50:03.18 *** Error: An error occurred while processing the log for database 'EAPDAT'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'EAPDAT' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
can this happened due to data base or log file corruption, if so how can i check on that to verify the issue
Its not necessary if the issue is with network it would happen every day IMO it basically happens when load on network is high and you transfer log file which is big in size.
As per message database engine was not able to restore log backup and said that you must rebuild log because it did not find out log to be consistent. From here it seems log corruption.
Is it the same log file you restored ? if that is the case since log file was corrupt it would ofcourse give error on wehatever server you restore.
Can you try creating logshipping on new server by taking fresh full and log backup and see if you get issue there as well. I would also say you to raise case with Microsoft and let them tell what is root cause to this problem
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
pls help me to fix this problem.
log file...
2014-02-24 14:04:20.396 [1192:14d4]: restore library built Jan 7 2014 at 02:02:33
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: iTunes 11.1.4.62
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Software payload version: 10B500
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Using iTunes state machine
2014-02-24 14:12:16.573 [1192:10d0]: iTunes: Specifying UOI boot image
2014-02-24 14:12:16.774 [1192:10d0]: requested restore behavior: Erase
2014-02-24 14:12:16.774 [1192:10d0]: requested variant: Erase
2014-02-24 14:12:16.997 [1192:10d0]: *** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
2014-02-24 14:12:17.390 [1192:10d0]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 063BE060 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 063BFF08 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 063BECC0 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 063BFDE8 [720A907C]>{length = 20, capacity = 20, bytes = 0x947ce636269ab8f999739b5a72d820c70102912a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 063BEC78 [720A907C]>{length = 20, capacity = 20, bytes = 0x86aa6a33d416b8183226d0b9188df879c0666e8a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 063BF890 [720A907C]>{length = 20, capacity = 20, bytes = 0xd1534e338ae80b9b4addae3c77a83a6186fe75ab}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 063BFE78 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 063BF338 [720A907C]>{length = 20, capacity = 20, bytes = 0x79be5d2f2f7054aa2d7bdd5b66e3a0eca07a725b}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 063BFE30 [720A907C]>{length = 20, capacity = 20, bytes = 0x1abed33b398f978c681b346ea167eb26eaf3b38e}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 063BDF88 [720A907C]>{length = 20, capacity = 20, bytes = 0x21abcad73c393fb9d197b34403d52ec82643ffc4}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 063BEC30 [720A907C]>{length = 20, capacity = 20, bytes = 0xfa0dc3003aeb828feda55a4ffb8027d10f054bce}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 063BFDA0 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 063BFD58 [720A907C]>{length = 20, capacity = 20, bytes = 0xc504724a963b954e32478d6920311a32baca15b9}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 063BFC38 [720A907C]>{length = 20, capacity = 20, bytes = 0x808a3980c646bd6d87921c9dba79c54a7759395a}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 063BED08 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 063BF578 [720A907C]>{length = 20, capacity = 20, bytes = 0x62d392da7901734968084e882ab8d687bc917be8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 063BFBA8 [720A907C]>{length = 20, capacity = 20, bytes = 0x059a392a0e7dccbfdc2f918cd59f4f5b4b140df8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 063BF410 [720A907C]>{length = 20, capacity = 20, bytes = 0x421d229710239b268c3a2544a4fb161a3d6288aa}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 063BF3C8 [720A907C]>{length = 20, capacity = 20, bytes = 0xa01b8483c6d2f2355569951d0e72df454f4432a7}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 063C3700 [720A907C]>{length = 20, capacity = 20, bytes = 0x9738ff132ae5b77833acdf2aa72af1558c4734d2}
2014-02-24 14:12:22.431 [1192:10d0]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
2014-02-24 14:12:22.685 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-request.plist
2014-02-24 14:12:24.350 [1192:10d0]: amai: tss_submit_job: HttpQueryInfo returned 200
2014-02-24 14:12:25.032 [1192:10d0]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
2014-02-24 14:12:25.078 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-response.plist
2014-02-24 14:12:26.597 [1192:10d0]: amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
2014-02-24 14:12:27.466 [1192:3a4]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:27.467 [1192:3a4]: iBoot build-style = RELEASE
2014-02-24 14:12:27.468 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.469 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.471 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.472 [1192:3a4]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:27.473 [1192:3a4]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:27.474 [1192:3a4]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:27.475 [1192:3a4]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:27.476 [1192:3a4]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:27.477 [1192:3a4]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:27.477 [1192:3a4]: radio-error not set
2014-02-24 14:12:27.478 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.480 [1192:3a4]: <Recovery Mode Device 025E0430>: production fused device
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.482 [1192:3a4]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:27.482 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 4 progress -1
2014-02-24 14:12:30.448 [1192:3a4]: bootstrapping restore with iBEC
2014-02-24 14:12:30.449 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:30.463 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 31 progress -1
2014-02-24 14:12:31.463 [1192:3a4]: <Recovery Mode Device 025E0430>: Recovery mode succeeded
2014-02-24 14:12:37.516 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:12:37.521 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:37.590 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.622 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.651 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.664 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.664 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, new device
2014-02-24 14:12:37.665 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:37.692 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.716 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.739 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 1
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 1, connected: 0
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:12:37.870 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.870 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.877 [1192:1558]: Recovery mode device connected
2014-02-24 14:12:37.877 [1192:1558]: Found new device.
2014-02-24 14:12:37.880 [1192:1450]: _AMRecoveryModeDeviceFinalize: 025E0430
2014-02-24 14:12:37.881 [1192:14d4]: iTunes: SCEP 2
2014-02-24 14:12:37.969 [1192:544]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:37.970 [1192:544]: iBoot build-style = RELEASE
2014-02-24 14:12:37.970 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 44 progress -1
2014-02-24 14:12:37.970 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:37.970 [1192:544]: requested variant: Erase
2014-02-24 14:12:37.971 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:12:38.675 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.677 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:38.677 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:38.677 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:38.677 [1192:544]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:38.677 [1192:544]: radio-error not set
2014-02-24 14:12:38.677 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.678 [1192:544]: <Recovery Mode Device 025DFDD0>: production fused device
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.679 [1192:544]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:38.679 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 4 progress -1
2014-02-24 14:12:41.655 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:41.656 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:41.656 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:41.656 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.659 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.661 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.664 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.666 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 42 progress -1
2014-02-24 14:12:41.666 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.669 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:42.160 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:12:42.163 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:42.231 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.285 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.340 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.364 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:42.367 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:42.432 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.487 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.541 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.566 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:42.706 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:42.706 [1192:544]: command device request for 'getenv ramdisk-size' failed: 2008
2014-02-24 14:12:42.707 [1192:544]: Unable to query iBoot ramdisk-size. Libusbrestore error : 67108864
2014-02-24 14:12:42.707 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 5 progress -1
2014-02-24 14:12:43.100 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:43.100 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:43.100 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:43.102 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:43.102 [1192:544]: command device request for 'getenv ramdisk-delay' failed: 2008
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.187 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.227 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.260 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.272 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.389 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.412 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.435 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.446 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:45.138 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 6 progress -1
2014-02-24 14:12:46.148 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 7 progress -1
2014-02-24 14:12:46.482 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 8 progress -1
2014-02-24 14:12:46.483 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:46.484 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:46.484 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 9 progress -1
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: Recovery mode succeeded
2014-02-24 14:12:48.195 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:48.200 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.201 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 1
2014-02-24 14:12:48.201 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:48.201 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:48.210 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.211 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.214 [1192:1558]: _AMRecoveryModeDeviceFinalize: 025DFDD0
2014-02-24 14:12:48.382 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:13:00.982 [1192:cfc]: Mux version 3 event happened
2014-02-24 14:13:00.982 [1192:cfc]: Passing control to mux version 2 handler
2014-02-24 14:13:00.983 [1192:cfc]: Muxed mode device connected
2014-02-24 14:13:01.049 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.055 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.266 [1192:1664]: received kAMDeviceAttached action, device id E80CE514C875BC07 (0641AB88), AFC error 0XE8000028
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Restore-mode device appeared, device 0641AB88
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
2014-02-24 14:13:01.267 [1192:1664]: <Restore Device 06F59780>: operation 3 progress -1
2014-02-24 14:13:01.272 [1192:1664]: <Restore Device 06F59780>: operation 4 progress -1
2014-02-24 14:13:01.297 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.300 [1192:1664]: Supports value queries: 1
2014-02-24 14:13:01.314 [1192:e7c]: value query for 'SerialNumber' returned 'C3VDMTBQDCP9'
2014-02-24 14:13:01.314 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.321 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.326 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.336 [1192:1154]: Found new device
2014-02-24 14:13:01.368 [1192:f44]: <Restore Device 06F59780>: operation 44 progress -1
2014-02-24 14:13:01.368 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:01.368 [1192:f44]: requested variant: Erase
2014-02-24 14:13:01.372 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:13:02.147 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.149 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.166 [1192:f44]: fixed TcpWindowSize (65535) can cause restore failure if too large
2014-02-24 14:13:02.238 [1192:f44]: device did not return saved USB log
2014-02-24 14:13:02.238 [1192:f44]: device had saved panic logs: panic(cpu 0 caller 0x80632111): "partition scheme present; however, no partition devices were created"@/SourceCache/IOFlashStorage/IOFlashStorage-558.4/IOFlashPartitionSchem e.cpp:267
Debugger message: panic
OS version: 9A405
Kernel version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:33:58 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8930X
iBoot version: iBoot-1219.43.32
secure boot?: YES
Paniclog version: 1
Epoch Time: sec usec
Boot : 0x526e9493 0x00000000
Sleep : 0x00000000 0x00000000
Wake : 0x00000000 0x00000000
Calendar: 0x526e94a6 0x000e2944
Task 0xc0562d20: 2451 pages, 81 threads: pid 0: kernel_task
thread 0xc064b230
kernel backtrace: cb643e2c
lr: 0x8007cc6b fp: 0xcb643e58
lr: 0x8007d26f fp: 0xcb643e88
lr: 0x80016391 fp: 0xcb643ea0
lr: 0x80632111 fp: 0xcb643ecc
lr: 0x806323b9 fp: 0xcb643ee0
lr: 0x8020dd3b fp: 0xcb643f18
lr: 0x8020db31 fp: 0xcb643f5c
lr: 0x8020e509 fp: 0xcb643f80
lr: 0x8020e2e5 fp: 0xcb643fa8
lr: 0x8007b37c fp: 0x00000000
Task 0xc0562ac0: 283 pages, 3 threads: pid 1: launchd
Task 0xc0562860: 515 pages, 1 threads: pid 2: launchctl
Task 0xc0562600: 690 pages, 1 threads: pid 3: restored_externa
Task 0xc05623a0: 3000 pages, 2 threads: pid 4: restored_externa
2014-02-24 14:13:02.248 [1192:f44]: connected to service com.apple.mobile.restored
2014-02-24 14:13:02.248 [1192:f44]: using protocol version 12
2014-02-24 14:13:02.256 [1192:f44]: unable to open device_map.txt: No such file or directory
2014-02-24 14:13:02.257 [1192:f44]: board config = n81ap
2014-02-24 14:13:02.264 [1192:f44]: no value returned for BootArgs
2014-02-24 14:13:02.264 [1192:f44]: _copyDeviceProperty() failed for restore bootargs
2014-02-24 14:13:02.272 [1192:f44]: no value returned for MarketingPartNumber
2014-02-24 14:13:02.272 [1192:f44]: _copyDeviceProperty() failed for mpn
2014-02-24 14:13:02.273 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.274 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.285 [1192:f44]: value query for 'HardwareModel' returned 'N81AP'
2014-02-24 14:13:32.300 [1192:f44]: <Restore Device 06F59780>: operation 28 progress -1
2014-02-24 14:13:32.364 [1192:f44]: device returned CFError with code 40
2014-02-24 14:13:32.364 [1192:f44]: dumping CFError returned by restored:
2014-02-24 14:13:32.364 [1192:f44]: CFError domain:AMRestoreErrorDomain code:40 description:storage device did not become available
2014-02-24 14:13:32.384 [1192:f44]:
==== device restore output ====
"P=N81 m=2.2 V=m"
AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-169.10 Feb 13 2013 22:10:14
AppleBCMWLANCore::init(): AppleBCMWLANV2-169.10 Feb 13 2013 22:10:17
000522.906303 wlan.W[0] AppleBCMWLANProvisioningManager::parseApplePrivateCIS(): @24 - Invalid 2.4 GHz Cal data in tuple 0x02
000522.907778 wlan.N[1] AppleBCMWLANProvisioningManager::handleBluetoothRegistrationGated(): Wrote bluetooth Mac Addr <<<mac address>>>
000522.909596 wlan.N[2] AppleBCMWLANConfigManager::gatherParameterData(): AWDL is not supported.
000522.914563 wlan.N[3] AppleBCMWLANCore:start(): Starting with MAC Address: <<<mac address>>>
000522.914795 wlan.W[4] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 80, error 61 (state 0x20)
IO80211PeerManager::initWithInterface cant add monitoring timer
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x916e0600
000522.916824 wlan.N[5] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x83b41000 (this 1, provider 0)
000522.916944 wlan.N[6] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
display-scale = 2
display-rotation = 0
found suitable IOMobileFramebuffer: AppleCLCD
display: 640 x 960
found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice - Configuration: iPod USB Interface
AppleSynopsysOTGDevice Interface: USBAudioControl
AppleSynopsysOTGDevice Interface: USBAudioStreaming
AppleSynopsysOTGDevice Interface: IapOverUsbHid
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice Interface: AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 13 2013 22:02:59
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
read new style signature 0x43313131 (line:389)
[FTL:MSG] VSVFL Register [OK]
[WMR:MSG] Metadata whitening is set in NAND signature
[FTL:MSG] VFL Init [OK]
[VFL:ERR] _LoadVFLCxt(line:1479) fail CS 1!
[VFL:ERR] _LoadVFLCxt(wCSIdx:1)(line 1779) fail!
[WMR:ERR] VFL_Open failed
AppleNANDLegacyFTL::start: AND init failed
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49152 62078<-usb->512
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(12, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(15, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(18, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49153 62078<-usb->768
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49154 62078<-usb->1024
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49155 62078<-usb->1280
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816210
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49156 62078<-usb->1536
AppleUSBDeviceMux::handleConnectResult new session 0x91816268 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816268
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49159 62078<-usb->2304
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49162 62078<-usb->3072
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49163 62078<-usb->3328
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49164 62078<-usb->3584
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'BootArgs' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'MarketingPartNumber' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
client protocol version 13
*** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
Restore options:
UUID => <CFString 0x1ed27a50 [0x32b100]>{contents = "B30995A9-9CBE-F743-9507-039BDD0D56EF"}
MinimumSystemPartition => <CFNumber 0x1ed279a0 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
SystemPartitionSize => <CFNumber 0x1ed28300 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
SystemPartitionPadding => <CFBasicHash 0x1ed27470 [0x32b100]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1ed277b0 [0x32b100]>{contents = "128"} = <CFNumber 0x1ed279d0 [0x32b100]>{value = +1280, type = kCFNumberSInt64Type}
3 : <CFString 0x1ed27ce0 [0x32b100]>{contents = "16"} = <CFNumber 0x1ed27a00 [0x32b100]>{value = +160, type = kCFNumberSInt64Type}
4 : <CFString 0x1ed1f1a0 [0x32b100]>{contents = "32"} = <CFNumber 0x1ed274d0 [0x32b100]>{value = +320, type = kCFNumberSInt64Type}
5 : <CFString 0x1ed27100 [0x32b100]>{contents = "8"} = <CFNumber 0x1ed282f0 [0x32b100]>{value = +80, type = kCFNumberSInt64Type}
8 : <CFString 0x1ed274e0 [0x32b100]>{contents = "64"} = <CFNumber 0x1ed27340 [0x32b100]>{value = +640, type = kCFNumberSInt64Type}
entering partition_nand_device
device supports boot-from-NAND
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49165 62078<-usb->3840
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49166 62078<-usb->4096
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49167 62078<-usb->4352
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49168 62078<-usb->4608
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49169 62078<-usb->4864
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
[IOFlashPartitionScheme:ERR] AppleNANDFTL initialization failed
[nand_part_core:ERR@ 429] no fbbt service available
[nand_part_core:BUG@3024] failed to create partition devices
unable to check is-bfn-partitioned property
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND failed to initialize: No additional error message.
==== end of device restore output ====
2014-02-24 14:13:32.384 [1192:f44]: AMRAuthInstallDeletePersonalizedBundle
2014-02-24 14:13:32.892 [1192:f44]: <Restore Device 06F59780>: Restore failed (result = 40)
2014-02-24 14:13:33.517 [1192:14d4]: iTunes: Restore error 40
2014-02-24 14:15:03.369 [1192:120]: Looking up device with muxID:1
2014-02-24 14:15:03.369 [1192:120]: Muxed device disconnected
2014-02-24 14:15:03.369 [1192:120]: RestoreOS mode device disconnected
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.916 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.955 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.993 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.165 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.188 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.211 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 1
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.230 [1192:1230]: Recovery mode device connected
2014-02-24 14:15:10.231 [1192:1230]: Found new device.
2014-02-24 14:15:10.241 [1192:14d4]: iTunes: SCEP 2Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
How to restore cold backup + archived log files
Hi,
Suppose I take a cold backup on 18th. After that I have four days of archived log files. if the database crashes on 5th day, I have to restore the 18th cold back + 4 days of archived log files. How do I restore since it is a cold backup and I cant do incomplete recovery.
can I use
Recover database ( with 18th cold backup) in mount state and apply archived logs.
PrabhathThe details of how you perform forward recovery using a cold backup depends on
1- rman or manual backup
2- using current or backup control file
3- if rman, recovery catalog or no recovery catalog
4- if full database recovered or only a few files
Each of these conditions will affect what is known to Oracle and what needs to be done. For example if you restored the entire cold backup including the control file then Oracle would see a consistent database and not need to perform recovery so you would need to startup mount and tell the database to perform recovery using a backup control file. If using rman and no recovery catalog you might need to catalog some of the archived redo logs, etc....
It is advisable to consult the Backup and Recovery manuals before attempting recovery for any new scenario.
HTH -- Mark D Powell -- -
Restore in noarchivelog mode ( redo log files have been dropped )
1, A full backup taken using RMAN is available on disk.
2, The current control files were NOT damaged and do not need to be restored.
3, All data files are damaged .
4, The database is in NOARCHIVELOG mode.
I restore database :
1. RMAN> STARTUP MOUNT
2. RMAN> RESTORE DATABASE;
3. RMAN> recover database;
in this step , I got the information about needing redo log files ; but the redo log
files have been dropped , what should i do ?
else
I want to know there is the command 'recover database using backup control file'
in rman or not ?
TksPossibly loss of data (because information in online redo logs is lost):
recover database until cancel;
(cancel immediately)
alter database open resetlogs; (to build a new set of redo logs)
It's not necessary to use a backup controlfile here. -
Error after Restoring Datafiles in Archivelog but missing archive log files
Hi all,
I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files. Yesterday night i have restored my DB .
I m happy to have my datafile contents till yesterday morning.
But after restoring when i try to open th DB, i m facing the following errors:
SQL> Startup open;
Oracle instance started but in mounted stagell
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
ORA - 01112: media recovery not started
SQL> recover;
ORA-00283: recovery session cancelled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
Alert Log File:
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 633339904
shared_pool_size = 301989888
shared_pool_reserved_size= 30183260
filesystemio_options = setall
control_files = E:\ORACLE\IE6\ORIGLOGA\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\ORIGLOGB\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\SAPDATA1\CNTRL\CNTRLIE6.DBF
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 301989888
compatible = 10.2.0
log_archive_dest = E:\oracle\IE6\oraarch\IE6arch
log_buffer = 2854912
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
user_dump_dest = E:\ORACLE\IE6\SAPTRACE\USERTRACE
core_dump_dest = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = IE6
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 402443468
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2, OS id=804
PSP0 started with pid=3, OS id=9580
MMAN started with pid=4, OS id=5840
DBW0 started with pid=5, OS id=8136
LGWR started with pid=6, OS id=8712
CKPT started with pid=7, OS id=1620
SMON started with pid=8, OS id=7084
RECO started with pid=9, OS id=9576
CJQ0 started with pid=10, OS id=9156
MMON started with pid=11, OS id=6000
MMNL started with pid=12, OS id=2856
Sat Apr 18 04:01:29 2009
ALTER DATABASE MOUNT
Sat Apr 18 04:01:33 2009
Setting recovery target incarnation to 1
Sat Apr 18 04:01:33 2009
Successful mount of redo thread 1, with mount id 1124466585
Sat Apr 18 04:01:33 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Sat Apr 18 04:01:34 2009
ALTER DATABASE OPEN
ORA-1589 signalled during: ALTER DATABASE OPEN...
Sat Apr 18 04:02:13 2009
alter database open resetlogs
Sat Apr 18 04:02:13 2009
ORA-1245 signalled during: alter database open resetlogs...
Sat Apr 18 04:11:05 2009
ALTER DATABASE RECOVER DATABASE UNTIL CANCEL
Sat Apr 18 04:11:05 2009
Media Recovery Start
Sat Apr 18 04:11:06 2009
Media Recovery failed with error 1610
ORA-283 signalled during: ALTER DATABASE RECOVER DATABASE UNTIL CANCEL...
Sat Apr 18 04:11:28 2009
ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE
Sat Apr 18 04:11:28 2009
Media Recovery Start
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE...
Sat Apr 18 04:17:23 2009
ALTER DATABASE RECOVER database using backup controlfile until cancel
Sat Apr 18 04:17:23 2009
Media Recovery Start
ORA-275 signalled during: ALTER DATABASE RECOVER database using backup controlfile until cancel ...
Any suggestions pls..............
Thanks & Regards,
SubbuHello Subbu,
> I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files.
You mean you have taken an online backup and lost all your archive log files after that online backup?
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
To perform a recovery with an online backup you will need all archive log files until the end of the online backup. If you have lost them you are not able to recover (or open) your database in a consistent state.
So the only suggestion we can do is:
You need the archive log files that were created during the online backup to perform an incomplete recovery ... if they are gone you can not restore your database.
Regards
Stefan -
BRARCHIVE backup for high volume offline redo log files on Standby Database
Hi All,
We are through with all of Standby database activity, also started applying the offline redo log files on the Standby site.
The throughput is not utilizing the actual available bandwith.
So we are not able to copy the offline redo files on time, as the offline redo files are piling up on the Production side.
My query is how we can parallely copy the offline redo log files on the DR site (ie. 4-5 redo files at a time).
Kindly guide for the same.
Regards,
Shaibazhi,
I have one doubt.
On other server (r3qas) the Umask settings are as followed
User UMASK value
<sid>adm 077
ora<SID> 077
root 077
Running SAP System : SAP R3 4.6C
Running DBMS : Oracle 9.0
Operating System :- HP_UX
On this system The new offline redo log files are created with 600 permissions. There is not a problem here, while taking the backup. I checked last "r3qas-archive" backups. There, i have not found any single error related to permissions, or any others (something like, Cannot open /oracle/RQ1/../.........dbf).
If everything is working fine, with this umask setting on this server, then, what's going wrong with the BW Quality server, which have the same umask settings (also others) for all the concerned users, as mentioned above.
Regards,
Bhavik Shroff -
RESTORE ARCHIVELOG ALL VALIDATE; - returns log file names
Environment:
Oracle 11.2.0.3 EE on Solaris 10.5
RMAN using control file as repository.
My archive logs are going to /arch/<SID>. During a time of unforeseen high activity the directory was filling up and some of the files had to be move to a different mount point. I have since done several Level 0 incremental backups including (plus) archivelogs.
My RMAN archivelog deletion setting is: CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 1 TIMES TO DISK;
I have since begun to run more frequent archive log backups to keep the mount point cleaner.
Since I have several successful Level 0 backups including archivelogs, I manually deleted the archived logs on the secondary mount point.
I registered the logs in the secondary mount point using REGISTER ARCHIVELOG START IN '/xxxx';
I then ran a CROSSCHECK ARCHIVELOG ALL; to update the control file repository.
When I query the V$ARCHIVED_LOG view I see many entries for my deleted log files with a STATUS = 'X' (Expired) and a BACKUP_COUNT = 0.
I ran DELETE EXPIRED ARCHIVELOG ALL;
Now when I query the V$ARCHIVED_LOG view I see many entries with blank name column for the SEQUENCE# in my list and with a STATUS = 'D' (Deleted) and a BACKUP_COUNT = 0.
When I run a RESTORE ARCHIVELOG ALL VALIDATE; it returns a long list of my deleted files with:
RMAN-06025: no backup of archived log ... to restore
OK, enough background. My question is how do I get RMAN to not look for my deleted files since I have several good backups?
I realize my deletion policy says the files have to be backed up once to disk, which according to the V$ARCHIVED_LOG view they are not, but I was hoping since I ran the CROSSCHECK RMAN would not even be concerned with them.
Many thanks for any advice!!
-garyThanks for the help! Square brackets! Doh!
I changed the SQL just a bit. I have only one (1) thread and the primary database was running for several months before the standby was implemented so there are over 3500 sequence#'s in the V$ARCHIVED_LOG view for the Primary (DEST=1) that are not in the Standby (DEST=2).
Here's the SQL I ran, using the SQUARE brackets! :-)
SELECT SEQUENCE#
FROM V$ARCHIVED_LOG
WHERE DEST_ID=1
MINUS
SELECT SEQUENCE#
FROM V$ARCHIVED_LOG
WHERE DEST_ID=2It appears to me the Standby is accepting and applying the archived logs from the Primary based on looking at the most recent archived log sequence#'s.
I'm just trying to get rid of the entries in the RESTORE ARCHIVELOG VALIDATE; command output.
I don't have an RMAN Repository but am using the control files at the moment.
Any other suggestions are very welcomed!!
Thanks again!
-gary -
Db restore non archive mode lost redo log file..restore from controlfile tr
i have a db 11g I had taken non archive backup but failed to take redo log files backup...
so while i restored the db ... after formatting the machine ..the oracle instance wont start.
I create a controlfile trace but when i run it i get errors.
since i dont have the older log files.. how do i get around with this issue
Thanks
Following is the sample of control file trace ..Note i cannot create the redo log file
since db wont be mounted at most it shall be in nonmount mode
and below is my created controlfile ....
CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_.LOG'
SIZE 50M BLOCKSIZE 512,
GROUP 2
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_.LOG'
SIZE 50M BLOCKSIZE 512
-- STANDBY LOGFILE
DATAFILE
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSTEM.DBF',
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\UNDOTBS1.DBF',
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX.DBF',
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\USERS.DBF'
CHARACTER SET AL32UTF8
I dont have these 2 files ..what do i do to get around this situation
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_.LOG'
SIZE 50M BLOCKSIZE 512,
GROUP 2
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_.LOG'
SIZE 50M BLOCKSIZE 512
-- STANDBY LOGFILE
DATAFILE
Edited by: zycoz100 on Feb 27, 2013 10:57 PMIf you have a cold backup (database shutdown properly) without the redo logs, change this :
CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOGto
CREATE CONTROLFILE REUSE DATABASE "XE" RESETLOGS NOARCHIVELOGYou have to change the NORESETLOGS to RESETLOGS for Oracle to recreate the online redo logs.
Hemant K Chitale
Maybe you are looking for
-
Hi, My 15 month old Macbook is needing repair again, and I'm wondering if I'm just wearing it out, and should really get a MB Pro. I don't do work that is processor intensive, but my MB is used as my desktop machine with external keyboard, mouse and
-
Slow performance of Java program with Oracle db on Solaris
Hi all, I'm developing a Java program to read a large no. of records (arnd 40,000) from a file and populate into an Oracle database on a Solaris system. I'm using a thin JDBC driver. The problem is that the program runs very slow on Solaris. When I r
-
This may have been mentioned before, but I wanted to get it out of my head before I forgot it. Dream: A font preview system within illustrator. 1. Type in your sample text within a dialog and preview typed characters on all the fonts of your system.
-
Problems while uploading text documents into Database
I just upgraded our database from 9iR1 to 9iR2 (9.2.0.1.0). The server character set is AL32UTF8. Now I'm facing a problem when uploading text documents into the database via a web frontend. I use the upload table defined for the PL/SQL Database Acce
-
Hi All, Some times when we are using the SAP system it show that a particular object has been locked . My question is , Is there any way to find that who has locked the data i.e. can we get the computer name or some other info from which the user can