Restoring pictures never stops.

My new (recently replaced by Apple due to camera issues from the old 5) iPhone 5 shows restoring the pictures and this never stops.  I have only 9 pictures in the camera roll.  This new phone was restored from my iMac last night.  The previous iPhone 5 had a same issue and the 'restoring' never stops.
I need some help how to stop this 'restoring'. 
Thanks for your advise and help.

Dr. 88 Keyz wrote:
I've observed the same thing on my iPhone 3G. Restarting rarely fixes it. The only reliable way I've found to get rid of the "Searching..." is to turn Airplane mode on then off. It seems like I've seen this more in OS 3.0.1 than in 3.0.
Actually I started seeing this after upgrading to 3.0 but it only happens rarely and like others said a restart will not fix it. Turning airplane mode on and off fixes the searching as well. Also I noticed that while it says searching I can still make phone calls so it seems it is a software bug for the display since it should not be able to make calls when searching.

Similar Messages

  • IPhone stopped restoring pictures from backup. How do I get my pictures back?

    I got a backup done at the apple store because my camera of my iphone 5 (iOS 7) was broken and they didn't want my pictures to get lost. Since then it was trying to restore but it never fully did more than 2/3 of my pictures never restored. Even with good wifi it wouldn't work and now it just stopped and I still can't find my pictures and videos anywhere. How do I get my pictures back?

    As I know, If the photo deleted, it still store in iPhone, if it isn't overwritten by other data, you can recover the deleted iPhone photos, you can search in google to find a tool to help you, I holp you make a backup with iTunes or iCloud, then follow this from Apple: http://support.apple.com/kb/ht1766

  • Hard disk never stops spinning

    When I connect my iPod to my Macbook the hard disk never stops spinning. When I connect it to my PC spinning stops after sync with iTunes and just turn on when I access the iPod.
    Does anybody know how to turn that off?
    Or is Spotlight scaning the data on the disk?

    Or is Spotlight scaning the data on the disk?
    Even it is doing the scaning, it could have been completed and stop. Have you tried to do the Restore for your iPod?

  • My iPhone 4 will not find any Bluetooth device not even my ipod touch . When I turn on bluetooth it starts searching and then never stops. It never finds my headset and never stops "searching". I have tried restarting the phone

    My iPhone 4 will not find any Bluetooth device not even my ipod touch . When I turn on bluetooth it starts searching and then never stops. It never finds my headset and never stops "searching". I have tried restarting the phone. what to do?

    Hi,
    You probably need to do this...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    But Try Here First
    Frozen or unresponsive iPhone
    From Here:
    http://www.apple.com/support/iphone/basics/

  • After restoring iPod it stops syncing half way

    After restoring iPod, it stops syncing while it is downloading music with an error message "Attempting to copy to the disk. iPod failed. The disc could not be read from or written to".
    My music is less memory than what my iPod can hold.
    What's up with this?
    THX!

    It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    tt2

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • TS2756 hotspot is not working on myiPad 3, hotspot tap is cellural data always appear that it is searching, and never stop. Vodafone and tradeline told me that there is no problem with carrier and Sw. Tethering data is never kept.

    Hotspot appear always to search and never stop
    internet is not working without internet APN data
    Tethering APN  never save the data
    Vodafone carrier checked and mentioned that the no problem with the SIM
    Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
    Please advice

    I have this _same_ issue, exactly.  Initial backup goes just fine, but incremental backups fail.  And like you, I replaced the internal drive.
    The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago.  The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC.  But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago.  I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
    I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail.  This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
    I'll be checking into this thred to see if others have the same issue, or if a solution is found.  Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
    -Gizm0d0

  • When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

    When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
    Problem Event Name:             APPCRASH
    Application Name:                  iTunes.exe
    Application Version:               10.4.0.80
    Application Timestamp:          4e262cfr
    Fault Module Name:               QuickTime.qts
    Fault Module Version:             7.70.80.34
    Exception Code:                     c0000005
    Exception Offset:                    00146b30
    OS Version                                                            1033
    Locale ID:
    Additional Information 1:          0a9e
    Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
    Additional Information 3:          0a9e
    Additional Information4:          0a9e372d3b4ad19135b953a78882e789
    Any assistance I can get will be greatly appreciated.

    Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

  • My ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

    my ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

    Connecting in recovery mode will help: http://support.apple.com/kb/HT1808

  • ITunes 7.6.1...the torture never stops

    I have to say upfront that iTunes 7.6.1 is the worst version. Ever.
    I couldn't use 7.6 because I got spinning beachballs ALL the time. Had to revert backwards. When 7.6.1 came out I gave it a go and things have ben great.
    Until now.
    I decided to rent my first movie via iTunes last night. It's not been played yet, but it seems ever since I DL'ed that rental, iTunes is essentially useless. I can play a song and within 10 seconds the beachball comes up and never stops. I can't play another song. I end up force quitting. I won't even try to play the movie rental for fear it'll freeze up during playback and then I'll be screwed.
    So, it looks like I'll have to go back to a previous version. Again. Make that twice now. I hate 7.6.1 and 7.6. Now I'll have to search the forums to recall how to go back to a stable version rather than watch the movie I downloaded to watch at this time. Then I won't be able to watch the rental on a previous version and I'm screwed out of a rental.
    I won't go back to another version (after I revert today) until 7.7 comes out. I am also irked that Apple apparently is in no hurry to address the many issues this version has. 7.6 acts like a Beta version and I've no idea (other than $$ from rentals) why they released such an unstable version. It's so Un-Apple like and more like the Borg from Redmond rather than the Cats from Cupertino.

    Have you tried it with a different users?
    Repaired permissions?
    Ran Disk First Aid?

  • IPod "Do not disconnect" message never stops

    I get an error message (The iPod "Tubby's iPod" cannot be ejected because it contains files that are in use by another application) when trying to eject my iPod from iTunes and computer. The iPod never appears to be finished with updating even though iTunes software states that the update is complete (“Do not disconnect” message never stops flashing on iPod).
    iPod info: 30GB iPod Video, iPod Software 1.0 (iPod with Video), updated on 11/7/05
    iTunes info: version 6.0.1.3, CD Driver 2.0.4.3, CD Driver DLL 2.0.3.2
    PC   Windows XP Pro  

    I had the same problem and this helped. Hasn't happened again. Good luck..
    http://docs.info.apple.com/article.html?artnum=61135
    Ipod 60gb   Windows XP  

  • Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

    Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

    No, you cannot downgrade your iOS device. That's not supported by Apple.

  • I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and

    I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and turning.

    Hi,
    Have you tried working through this document - it does apply to Elements as well.
    Sign in, activation, or connection errors | CS5.5 and later
    If you still have problems you may need to contact the Adobe activation team - see the "Still need help?" link at the end of the document.
    Good luck
    Brian

  • Verity vspider.exe process never stops and sucks system resources

    I'm running a scheduled task to index a site on a Win2k3 server running CF8. I'm having a problem where the vspider.exe process never stops and sucks up system resources, slowing my whole server down. It actually is doing quite a bit of work... I'm directing the output into a log file, and I'm getting 300 K of information and it seems to be walking the site just fine. But it ends up not finishing the job and running forever. I have to open the task manager to terminate the process and then the server runs better.
    Any ideas?

    I have not found an answer to this problem, though it hasn't been a problem lately. I now send the output of the vspider.exe process to a log file and can check the status of the index job. I index nightly, so if the process is running at anytime, I can look at the results of the index job in my log file. This might give some clues. I have a feeling I had a corrupt index and vspider was choking. Try rebuilding your index from scratch.

  • When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning.  My computer is stuck!  Any Suggestions?

    When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning.  My computer is stuck!  Any Suggestions?

    Follow all the steps at > Mac OS X: Gray screen appears during startup

Maybe you are looking for

  • Virtual cube with services in BCS

    I get the error "Unable to determine data basis for virtual InfoCube <virtual cube>" when running listcube for <virtual cube>. <virtual cube> was manually created from copy of an existing virtual cube mapped to a basic cube. I also made an entry in t

  • Searching in sxmb_moni for business data

    Hello, it is possible searching for business data in sxmb_moni for example a order-No. The reason is that a customer want know the time the order is executing or this happened without an error or trying to send the order again. Normally only with the

  • Need to exchange PS 13 Windows for Mac version

    I mistakenly purchased the Windows version of PS 13. I need the Mac version instead. I have not yet downloaded the purchase. How should I proceed?

  • Font change in text enum ring and display issue

    Hi, I was finally able to update the text in a text ring programmatically, but for some reason, when I choose it as a drop-down menu, I just see blanks.  Also, for some reason, the font used is changed - it is more spread out and and block letters. 

  • Sleeping issue on brand new Satellite Pro U500-1EX

    Hi Guys, I've got a brand new Satellite Pro U500-1EX with Windows 7 64bit. The laptop is having some issues with its sleep function. I am wondering if others have had the same problem - and if anyone knows anything that can be done. OK there are two