Restoring RMAN backup from tape beyond retention policy ??

Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.

dba.arnab wrote:
Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.
Assuming the actual backup files still exist (the only thing actually deleted is the record of them in the catalog), you can make those files available and use the rman 'catalog' command to re-catalog them.

Similar Messages

Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

Restore RMAN backup from tape

I have to restore the RMAN full backup from tape to new host to a previous date say March 1st. My target database RMAN retention period is 28 days, today is 11th May.
Is it possible to restore the obsolete database from tape backup to new host as of May 1st. If not possible, I would like to restore the available backup say as 15th April from tape to new host.
Can you please provide me the steps to restore the tape old backup to new host.
Thanks,
Mahi

Can't read documentation? You also seem to be unable to mark questions as answered
Mahi
     Newbie
Handle:      Mahi
Status Level:      Newbie
Registered:      Nov 24, 2010
Total Posts:      24
Total Questions:      15 (13 unresolved)
Sybrand Bakker
Senior Oracle DBA

Restore the backup from tape to some other server

Dear All,
I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
Regards,
Kumar

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

How to restore a Rman backup from Tape

Hi,
We need to restore the database backup taken through RMAN on 24-JUNE-2013 from tape as this backup is not currently available on disk.
Can you please help me on the following,
1) how i can check if the same backup on 24-JUNE-2013 is available on Tape.
2) If yes how i can restore to Disk.
Because we need to create a new Clone instance from the backup taken on 24-JUNE-2013.
We are having 12.1.3 Application on Exalogic and 11.2.0.3 Database on Exadata machine.
Our support is highly appreciated.
Thanks

user11969666 wrote:
Hi,
We need to restore the database backup taken through RMAN on 24-JUNE-2013 from tape as this backup is not currently available on disk.
Can you please help me on the following,
1) how i can check if the same backup on 24-JUNE-2013 is available on Tape.
2) If yes how i can restore to Disk.
Because we need to create a new Clone instance from the backup taken on 24-JUNE-2013.
We are having 12.1.3 Application on Exalogic and 11.2.0.3 Database on Exadata machine.
Our support is highly appreciated.
Thanks
Your questions are answered in the Backup and Recovery User's Guide -- Contents
Thanks,
Hussein

Restoring RMAN Backup from ASM RAC env to Non ASM standalone environment

Hi,
Can anyone please tell me how to restore database using RMAN in a Non ASM environment as my backup file with ASM RAC environment.
i was also looking for some documentation which provides clear explanation about RMAN backup and Restore in ASM and Non ASM environment.
Thanks

You can set the parameter db_file_name_convert in init.ora in you new database with [ID 47325.1]
or
you can set parameter "set newname" in your script rman. [ID 549972.1]
if you have one or two destinations of dbfiles in ASM I seggest to you set parameter db_file_name_convert in init.
example:
db_file_name_convert=('+DGDATA','/u01/oradata/');
remenber you need set log_file_name_convert to.
log_file_name_convert=('+DGREDO','/u01/redo/');
if you use "set newname" commands you need set this lines in your script rman.
set newname for datafile 1 to '/u01/oradata/system01.dbf';
set newname for datafile 2 to '/u01/oradata/undotbs01.dbf';
set newname for datafile 3 to '/u01/oradata/sysaux01.dbf';
set newname for datafile 4 to '/u01/oradata/users01.dbf';
and every datafiles you need set!
Edited by: user1107977 on 21/07/2011 13:47

Problem when restoring Backup from Tape...

Hi
I am getting the following error when I am trying to restore a backup from Tape on AIX system:
BR0279W Return code from 'LANG+C cd /oracle/RSD/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0': 0
BR0359W Restore of /oracle/RSD/sapbackup/.tape.hdr0 from /dev/rmt0 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0 failed
BR0236I Perfhaps volume initialization with option '-i force' required
I have initialized the tape before backup to label RSDB05 which I used while taking the backup.
When I initialized the tape as mentioned above with '-i force' then while restoring there is problem of timestamp.
How to restore the backup from tape now.
Regards
Chin2

Dear Ahamad,
In this command " brrestore -b xxxx.anf -m all -p /oracle/TRG/102_64/dbs/initSRC.sap " you are calling parameter file of source system initSRC.sap in which system is checking parameter/option 'compress_dir'. Please check if its same. Why you have replaced the SSID with TSID its not required at all.
Please follow these steps....
Place xxxxx.anf file in backup directory. check for parameters in initSID.sap file of TRG system. It should be the same as of SRC system.
Try again and post result if you are getting any error.
Regds
Anil

RMAN backup in tapes

Hi
We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.
Thanks
Shaik

We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.Creation Of Rman Duplicate Without Target And Recovery Catalog Connection. [ID 1113713.1]
Backup and Recovery
http://www.oracle.com/pls/db102/portal.portal_db?selected=3
Thanks,
Hussein

Rman Backup in Tape - Restore

Hi All,
This's my scenario.
I am using oracle 10gR2 on solaris 10. I configured Rman for my database. I ran the backup command on monday and again tuesday and again today also.
All backups are stored in tape not disk. now I have a problem, so I want to restore the Monday backup from tape.
How to tell these to Rman. If I simply mentioned the restore command, hope Rman will restore the latest backup. But I want to restore the Monday Backup.
Could you anyone help me on this..
Many Thanks
Senthil

when ever you are recovering the database to certain time,certain scn then it is a incomplete recovery only.
after completing the recovery by specifying until time or until SCN oracle will not allow you to open the database.
It will ask you to open the database in resetlog mode.
The step which admin given is correct one but after that you have to open the db in resetlog mode
Edited by: PrafullaNath on May 19, 2010 4:28 PM

Restore ( duplicate) db from tape backup from one server to another server

I am looking for step by step process to restore (duplicate)db from tape backup from one server to another server
Thanks

Creating a Duplicate Database on a Remote Host will provide all the information.

RMAN recovery from tape and disk?

Hey Guys,
Here is my scenario: -
I have Oracle 10g and I am using RMAN to backup to disk and then I use Networker to backup on tapes from disk (retention is set to 30 days on tapes). On RMAN - my retention policy is set to recovery window of 5 days after which it deletes the obsolete backup from disk and updates the control file.
My Questions:
1. If I have to recover any datafile or tablespace 20 days ago how can I restore it on Production. Since I am also backing up control files on tapes but my current control file will not have 20 days old information. Is there any way that I can restore my old backup?
2.How can I test my tape backup which is older than 5 days. In other words how can I restore my database from tape on another server/
Please suggest.

If you need to restore the whole database to a point in time that is 20 days old, you "only" need:
1. to identify the right control file backup
2. restore this control file backup with Networker
3. start the instance in mount mode
4. list required datafiles and archived redo logs backup sets listed in this control file with LIST BACKUP
5. restore these backup sets with Networker
6. restore and recover database with RMAN with the right SET UNTIL clause.
If you need to restore only 1 tablespace, that's Tablespace Point In Time Recovery (TSPITR) and is another story.
I don't think you can only restore 1 datafile that is 20 days old and leave other datafiles up-to-date (unless there is only 1 datafile in the tablespace and in this case this is TSPITR).

Restore RMAN Backup

Dear All,
I am practicing Oracle Restore scenarios on my Oracle 9i database. Once I complete my tests in Oracle 9i I will move up to 10g and then finally to 11g.
Following is my recovery scenario:
1) I did NOT configure Recovery Catalog
2) I would like to restore my databse from a 15 days old backup
3) control_file_record_keep_time is set to 7 days.
4) Backups are on tape.
Can you guys please shed some light on how to I proceed?
- P

In oracle 9i , check , which situation you can perform complete recovery and in which situations you have to select incomplete recovery.
check the notes by Alejandro Vargas, BACKUP AND RECOVERY SCENARIOS
http://www.google.co.in/#hl=en&q=oracle+backup+and+recovery+scenarios&aq=0&aqi=g10&aql=&oq=oracle+backup+and+reco&gs_rfai=&fp=aa24f2b3591f5f42
[PDF]
Backup and Recovery Scenarios - Backup & Recovery Check List
- 4:11am
File Format: PDF/Adobe Acrobat - Quick View
Oracle Support Israel. User Managed Recovery Scenarios And Configuration .... 4. recover automatic database using backup controlfile; ...
static7.userland.com/oracle/gems/.../BackupAndRecoveryChecklist.pdf
refer this, this will helps you.
Can one restore RMAN backups without a CONTROLFILE and RECOVERY CATALOG?_
http://www.orafaq.com/wiki/Oracle_database_Backup_and_Recovery_FAQ#Can_one_restore_RMAN_backups_without_a_CONTROLFILE_and_RECOVERY_CATALOG.3F
Edited by: rajeysh on Jun 20, 2010 6:36 PM

Rman backup to Tape taking a long time

Hi,
I am trying to backup 10 TB database to tape using RMAN. It is taking 2 days to complete. Can some one have any suggestions to improve the backup time.
Here is the configuration parameters
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 8 BACKUP TYPE TO BACKUPSET;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oinstall/10201_0_64/dbs/snapcf_FR2.f'; # default
Here is the backup Script.
run
allocate channel t1 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t2 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t3 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t4 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t5 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t6 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t7 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
allocate channel t8 type 'sbt_tape' parms'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
backup filesperset 15 as compressed backupset format '%d_Full_u%U_s%s_p%p_t%t' database plus archivelog delete input;
backup current controlfile format '%d_CF_u%U_s%s_p%p_t%t';
crosscheck copy of controlfile;
crosscheck backup;
crosscheck archivelog all;
release channel t1;
release channel t2;
release channel t3;
release channel t4;
release channel t5;
release channel t6;
release channel t7;
release channel t8;
Please Help !!!!!

Hi,
Yeah.. we had TSM set up with TDPO installed. Four tape drives has been dedicated for this server. hence i am running it with four channels.
We are backing up directly to tapeThis is backup system info.
The storage would be like :
- SAN (?)
- SSD (?)
- Exadata cells (?)
- local disk (?)
- RAID (?)
- Volume manager (?)
- amount of spindles (?)
- etc
Regards,
Tycho

Restoring Rman backup on New Host with different directory structure

Hi,
I have a following scenario to clone the database.
1. clone the database on new server
2. source is non - ASM and target is ASM
3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
I did the following steps and getting below error:
1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
*.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
*.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
script i am using is :
RMAN> run {
2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> allocate channel c3 device type disk;
6> allocate channel c4 device type disk;
7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
81> restore database;
82> switch datafile all;
83> recover database;
84> alter database open resetlogs;
85>
86> release channel c1;
87> release channel c2;
88> release channel c3;
89> release channel c4;
90> }
Getting the following error, copied lines from the error i am getting.
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 27-DEC-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/27/2010 08:09:08
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 74
RMAN-06100: no channel to restore a backup or copy of datafile 73
Please advice...
Thanks,
Tanveer Mohammed

If you would like, please refer the link:-
http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/

RMAN backup in tape

How to perform RMAN backup in tape.
Regards
Iman

The information you require is depending on the MML you are using or planning to use, so without further info from your side answers can not be provided.
Also alanm already posted a documentation link. Did you read that?
Sybrand Bakker
Senior Oracle DBA

Restoring RMAN backup from tape beyond retention policy ??

Similar Messages

Maybe you are looking for