Restoring Rman backup on New Host with different directory structure

Hi,
I have a following scenario to clone the database.
1. clone the database on new server
2. source is non - ASM and target is ASM
3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
I did the following steps and getting below error:
1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
*.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
*.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
script i am using is :
RMAN> run {
2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> allocate channel c3 device type disk;
6> allocate channel c4 device type disk;
7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
81> restore database;
82> switch datafile all;
83> recover database;
84> alter database open resetlogs;
85>
86> release channel c1;
87> release channel c2;
88> release channel c3;
89> release channel c4;
90> }
Getting the following error, copied lines from the error i am getting.
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 27-DEC-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/27/2010 08:09:08
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 74
RMAN-06100: no channel to restore a backup or copy of datafile 73
Please advice...
Thanks,
Tanveer Mohammed

If you would like, please refer the link:-
http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/

Similar Messages

How duplicate ora11 on windows to another host with different directory structure

Hi,
I need help.
I want to duplicate db (11.2) running on windows from server A to Server B
Directory structures on server A and Server B are different;
my steps
on server A
1.backup database plus archivelog delete input;
2.insert into table t values(1);
3.commit;
4.backup archive log all;
On Server B
5.copy backup and archive logs from server A to server B (c:\backup\temp)
6.create folders C:\oracle\oradata\bamboo
7.oradim –new –sid bamboo -- (verified service is running)
8. created pfile.ora with param (db_name=bamboo)
9.SET oracle_SID=bamboo
10.sqlplus /as sysdba
11.startup nomount pfile='(c:\backup\temp\pfile.ora'
12.C:\oracle\product\11.2.0\db_1\database>rman auxiliary /
result
..connected to auxiliary database: SBDBT02W (DBID=186082786, not open) --could it be the fact that I tried to execute code bellow?
My understanding at this point I should be connected to 'bamboo' -- my new database, what steps did I miss?
I expect
..connected to auxiliary database: bamboo ( not mounted)
bellow is code that I was going to run on Server B
RUN
SET NEWNAME FOR DATAFILE 1 TO 'C:\oracle\oradata\bamboo\SYSTEM01.DBF';
SET NEWNAME FOR DATAFILE 2 TO 'C:\oracle\oradata\bamboo\SYSAUX01.DBF';
SET NEWNAME FOR DATAFILE 3 TO 'C:\oracle\oradata\bamboo\UNDOTBS01.DBF';
SET NEWNAME FOR DATAFILE 4 TO 'C:\oracle\oradata\bamboo\USERS01.DBF';
SET NEWNAME FOR DATAFILE 5 TO 'C:\oracle\oradata\bamboo\EXAMPLE01.DBF';
DUPLICATE DATABASE TO bamboo
UNTIL TIME "TO_DATE('11/24/2013 13:18:02', 'MM/DD/YYYY HH24:MI:SS')"
BACKUP LOCATION 'C:\backup\temp'
NOFILENAMECHECK;
when I executed it on Server B ,I got following error
Starting Duplicate Db at 25-NOV-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/25/2013 11:27:36
RMAN-05500: the auxiliary database must be not mounted when issuing a DUPLICATE
command
I looking for steps by step instruction for duplicating db to another windows host with different directory structure.
Thank you
Alex

The topic, "Duplicating a Database on a Remote Host with a Different Directory Structure" can be found at http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1006672
This information should provide you the step by step process to follow including when on Windows.
HTH -- Mark D Powell --

Standby database with different directory structure

Hi,
sorry to say that we are in desupported version due to some constraint.
oracle version : 8.1.7.0.0.
os:sun 5.9
I need to create physical standby database with different directory structure:
i have created standby database with same directory structure of primary, now i have requirement to create with different directory structure.
in oracle 8i we can not give multiple parameter for db_file_name_convert(ORA-01678: parameter db_file_name_convert must be two strings, a pattern and a replacement) and i do have partitions in primary as follows:
bash-2.05$ df -h
Filesystem             size   used avail capacity Mounted on
/dev/dsk/c1t0d0s0       20G    14G   5.6G    72%    /
/proc                    0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
fd                       0K     0K     0K     0%    /dev/fd
swap                    11G    40K    11G     1%    /var/run
dmpfs                   11G     0K    11G     0%    /dev/vx/dmp
dmpfs                   11G     0K    11G     0%    /dev/vx/rdmp
swap                    11G   656K    11G     1%    /tmp
/dev/dsk/c1t0d0s3       25G    18G   6.8G    72%    /oracle
/dev/vx/dsk/suportaldg/oracle1
                        12G    11G   1.1G    91%    /oracle1
/dev/vx/dsk/suportaldg/oracle2
                        12G   8.1G   3.7G    69%    /oracle2
/dev/vx/dsk/suportaldg/orapurge
                       200G   182G    17G    92%    /orapurge
/dev/vx/dsk/suportaldg/oracle3
                        12G    10G   1.9G    85%    /oracle3
/dev/vx/dsk/suportaldg/oracle4
                        12G    12G    58M   100%    /oracle4
/dev/vx/dsk/suportaldg/oracle5
                       7.0G   5.9G   1.0G    86%    /oracle5
/dev/vx/dsk/suportaldg/oracle6
                       7.0G   6.4G   564M    93%    /oracle6
/dev/vx/dsk/suportaldg/oracle7
                        23G    23G   358M    99%    /oracle7
/dev/vx/dsk/suportaldg/oracle8
                        13G    13G   165M    99%    /oracle8
/dev/vx/dsk/suportaldg/oracle9
                        23G    22G   1.4G    94%    /oracle9
/dev/vx/dsk/suportaldg/oracle10
                        12G 10.0G   1.9G    85%    /oracle10
/dev/vx/dsk/suportaldg/oracle11
                        39G    36G   2.1G    95%    /oracle11
/dev/vx/dsk/suportaldg/oracle12
                        39G    38G   1.1G    98%    /oracle12
/dev/vx/dsk/suportaldg/oracle13
                        68G    65G   2.6G    97%    /oracle13
/dev/vx/dsk/suportaldg/oracle14
                       200G   199G   1.3G   100%    /oracle14
/dev/vx/dsk/suportaldg/oracle15
                       200G   196G   3.6G    99%    /oracle15
/dev/vx/dsk/suportaldg/oracle16
                        70G    64G   5.5G    93%    /oracle16
/dev/vx/dsk/suportaldg/oracle20
                       7.0G   6.4G   609M    92%    /oracle20
/dev/vx/dsk/suportaldg/oracle50
                        28G    26G   2.0G    93%    /oracle50
/dev/vx/dsk/suportaldg/oratranslog
                       185G   165G    19G    90%    /oratranslogso how i can create standby database with different directory structure, help is appreciated.
Thanks
Edited by: prakashdba on Mar 5, 2009 11:04 PM

Looks like very difficult and inform you mgmt about the drawbacks of running olderv ersions
may be you can try something like this but i dont know whether it is supported or not
db_file_name_convert=['/dev/vx/dsk/suportaldg/oracle3','/dev/vx/dsk/suportaldg/STDBY/oracle3']
db_file_name_convert=['/dev/vx/dsk/suportaldg/oracle4','/dev/vx/dsk/suportaldg/STDBY/oracle4']
db_file_name_convert=['/dev/vx/dsk/suportaldg/oracle5','/dev/vx/dsk/suportaldg/STDBY/oracle5']

Restore RMAN backup on new server

Hi
I took RMAN backup of a database with control file autobackup on...I copied the backup
to a new server restored the spfile from the backup and modified the parameters
bdump,udump,control file because the directory structure is different from the original
machine.I restored the control file and it was restored properly.
Now I need to restore the datafiles in the new path so I used set newname and switch
but I get some error ....I have posted the error please look at it
RMAN> run
2> {
3> set newname for datafile 1 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSTEM01.DBF';
4> set newname for datafile 2 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\UNDOTBS01.DBF';
5> set newname for datafile 3 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSAUX01.DBF';
6> set newname for datafile 4 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\USERS01.DBF';
7> set newname for datafile 5 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_01.DBF';
8> set newname for datafile 6 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSIDX01.DBF';
9> set newname for datafile 7 to
'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_AUDIT01.DBF';
10> restore database;
11> switch datafile all;
12> recover database;
13> }
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 11-NOV-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSTEM01.DBF
restoring datafile 00002 to E:\ORACLE\METAGRID\ORADATA\METAGRID\UNDOTBS01.DBF
restoring datafile 00005 to E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_01.DBF
restoring datafile 00006 to E:\ORACLE\METAGRID\ORADATA\METAGRID\TSIDX01.DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/11/2010 12:38:24
ORA-19693: backup piece E:\RMAN\DB_0FLSLJH1_1_1 already included

Try to clear and recatalog the backups to be used, before the restore:
rman target /
crosscheck backup;
delete expired backup;
catalog start with 'path_to_your_backup';

Restoring the backup on other server with different patch level

Hi Gurus,
I have one HP-UX B11.31 server which holds ORACLE software with 10.2.0.4 patch level, and I have restored one database with the same patch level from HP DataProtector successfully. Now, I want to restore two node RAC database backup with Oracle Patch level of 10.2.0.2 into the Restore server which is of 10.2.0.4 patch level, the RAC database uses ASM, here are the steps which I am going to follow;
1. Create a new database with the same schema as like the RAC database in ASM.
2. Restore & Recover the RAC database backup from Data Protector.
But, I have one question, can I restore & recover the backup which is in lower grade Oracle software patch level i.e; 10.2.0.2 on a higher grade Oracle software patch level ie; 10.2.0.4 ???
?:|
Even after restoring & recovering can the database will work? PLEASE guide.
Thanks in Advance.

Thanks again!!!
The point of upgrading the database comes when there is already a database and one is upgrading the ORACLE software version and then upgrading the database to its version using the scripts you suggest.
Here is the scenario where I have to restore and recover a 10.2.0.2 RAC database backup on 10.2.0.4 sotware version,
*my question is that, whether there will be any conflict of patch version as the Oracle Brain will be of the latest version? Oracle software will successfully restore and recover the database backup with a lower patch version? or it will throw any error when restoring the backup like compatibility unmatched between the software and the backup you are trying to restore & recover?*
yes the RAC database is in ASM.
Thanks & Regards

Restoring old backup on new computer with new phone

I wasn't prepared, but I backup up my wife's iPhone 4 on my laptop and then we went out to get her the iPhone 5. Came home, plugged in the new phone to restore, but said I needed the latest version of iTunes (11.0.1). But I can't download the new iTunes because I'm running 10.5.8 on this antique iBook.
So I copied my backups to a hard drive, then transferred them to my work laptop (which is running 10.7.3) and downloaded the new version of iTunes.
So where do I want to put the old backup so that iTunes will recoginize it? The "RESTORE BACKUP" button is currently grayed out.
Also, I've never had any isses in the past, so I've never had to restore. Is there anything else I should be aware of?
My wife is about to kill me over this little deal. Help please.

Hey mate... well I never use migration assistant cos i always like to have a totally new system on the new computers without the quirks of the last one.
Can you use migration assistant once you JUST to get hold of the Address Book or do you also need to import a whole bunch of other stuff... I just don't know cos I have never used it.
Thanks heaps,
Crazy

Moving iTunes to new PC with different drive structure

Hi
I have just purchased a new laptop. My current Windows 7 laptop has iTunes in the default file locations c:\users\username\music\itunes etc.
My new laptop however has a partitioned disk with d: being the data drive. I have copied all the iTunes folders to the d:\ drive and set this as the media folder in iTunes.
I have tried copying the old library files across to the new PC but iTunes fails to find the files, and even after manually resetting a few files still doesn't recognise the new location.
For info, the new c: drive is not big enough to hold the entire iTunes media so I can't put it there and then move.
Any ideas how to get iTunes to recognise the media in the d: drive and keep my library intact. At nearly 350gb of video and audio I really don't want to lose it, and after 2 days of trying am tearing my hair out.
Thanks for any help.
Rob.

Copy your entire iTunes folder from C:\Users\<Username>\Music\iTunes on the old laptop to D:\iTunes on the new one. Hold down shift as you start iTunes and keep holding until asked to choose or create a library. Click choose. Navigate to D:\iTunes\iTunes Library.itl. That should be it.
Since you've already copied over the media you can probably save some time by copying over a fresh copy of the files in the iTunes folder (inc. the Album Artwork folder) and then move the iTunes Media folder into the correct place inside iTunes.
tt2

[HELP] Problem with restore and recovery to new host

Hi, guys!
I have been trying for two days, but still cannot get it to work.
I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
Could anyone help me out here? Any advice would be appreciated!
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATADATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Here is some extra information that you might want to know about:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 PRODDB 3774691295 PARENT 1 17-APR-07
2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
RMAN> list backup recoverable;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 822.34M DISK 00:29:47 07-NOV-11
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
SPFILE Included: Modification time: 07-NOV-11
BS Key Size Device Type Elapsed Time Completion Time
39 18.46M DISK 00:00:05 08-NOV-11
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
List of Archived Logs in backup set 39
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 2146951 07-NOV-11 2149493 07-NOV-11
1 2 2149493 07-NOV-11 2149519 07-NOV-11
1 3 2149519 07-NOV-11 2149565 07-NOV-11
1 4 2149565 07-NOV-11 2149641 07-NOV-11
1 5 2149641 07-NOV-11 2172859 07-NOV-11
1 6 2172859 07-NOV-11 2197851 07-NOV-11
1 7 2197851 07-NOV-11 2220349 08-NOV-11
1 8 2220349 08-NOV-11 2222621 08-NOV-11
1 9 2222621 08-NOV-11 2222729 08-NOV-11
1 10 2222729 08-NOV-11 2223088 08-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
SPFILE Included: Modification time: 08-NOV-11
Thanks in advance!
Jay

Thank you for your reply,Hemant K Chitale!
>
a) Does the directory structur exist on the new server :
D:\DBDATA\PRODDB\ --- for files 1 to 4
D:\ --- for file 5
D:\ORA_DATA\ --- for files 6 to 8
>
Yep, I have doubled check the directory structure that get in the way, and they are all exist.
Would it be something to do with the folder permissions?
>
b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
>
I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
>
(I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
>
Yep, that's exactly what I did.
//executed @ RMAN prompt of the new host
startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
restore controlfile from autobackup;
alter database mount;
restore database sequence 10 thread 1;
//get stucked here with RMAN-06026, 06023
//...the following is not executed yet.... :-(
recover database until sequence 10;
alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
I have made several attemps with your advice, but still get the same type of errors.
Here is the output:
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
+\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
as you suggested, this backup piece of controlfile should be right one to be restored.
RMAN> shutdown;
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 364907424 bytes
Database Buffers 121634816 bytes
Redo Buffers 2899968 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-NOV-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
database name (or database unique name) used for search: PRODDB
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
Finished restore at 08-NOV-11
tried shutdown normally and mount again instead.
RMAN> shutdown;
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
C:\>rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 369101728 bytes
Database Buffers 117440512 bytes
Redo Buffers 2899968 bytes
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
Starting implicit crosscheck backup at 08-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 08-NOV-11
Starting implicit crosscheck copy at 08-NOV-11
using channel ORA_DISK_1
Crosschecked 2 objects
Finished implicit crosscheck copy at 08-NOV-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
08\O1_MF_S_766661651_7CJY84LK_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
//however, still get the same results(ended up with errors)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 13:50:29
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Edited by: HappyJay on 2011/11/08 13:59

Restoring RMAN backup on a different server

Hi oracle gurus
i have following scenario
i have a compressed backup set of a database
i want to restore that rman backup on to a different server.
both the server have same version of oracle.and both the server are of 32 bit.
please reply if any more info is required.

RESTORE AND RECOVERY PROCEDURE OF PRODUCTION DATABASE BACKUP ON TEST SERVERS
As part of disaster recovery exercise or to test the validity of a RMAN backup, a full restore and recovery of databases can be performed on scratch or test servers utilising the production RMAN backups which have been restored from the tape backups on these test or scratch servers.
This note will illustrate the above procedure by detailing the steps required to restore the backup of a production database (prod1) on a test server linux01 .
The following assumptions are made in this note:
The RMAN backups have been restored from tape backups to the same backup location on the test server as the production server where the backup was originally taken
The identical directory structure as is present on production has been created on the test server. This will apply to not only the location of the database files (data, control files, redo log files), but also to the bdump,cdump, udump and adump locations.
Controlfile autobackup has been enabled. This is important.
Overview
Restore the spfile from the autobackup
Restore the controlfile from the autobackup
Restore the data files
Recover by applying archived redo log files
Open the database with resetlogs
Restore the SPFILE
[oracle@linux01 prod1]$ rman target /
connected to target database (not started)
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> startup force nomount;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/10.2.0/dbs/initprod1.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 2039056 bytes
Variable Size 67109616 bytes
Database Buffers 83886080 bytes
Redo Buffers 6348800 bytes
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore spfile from autobackup;
4> }
RMAN> shutdown immediate;
Restore the Control File
In this case, the instance is now being started with the restored spfile. We can create a pfile as well from this spfile is so required.
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore controlfile from autobackup;
4> }
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
Restore the database
RMAN> restore database;
Recover the database
The recovery will fail at a point where it cannot restore any more archived redo log files.
In this case the last archived log file which has been backed up is sequence 613.
This information can be obtained by issuing a LIST BACKUP OF ARCHIVELOG ALL command.
So RMAN will fail when it tries to apply sequence 614 ….
RMAN> recover database
[oracle@linux01 PROD1]$ rman target /
connected to target database: PROD1 (DBID=4266928631, not open)
RMAN> sql 'alter database open resetlogs';
RMAN>
reference: http://gavinsoorma.com/recovery-scenarios/

Is there anyway to restore an iphone to new from a different computer and then use a backup from the cloud?

Is there anyway to restore an iphone to new from a different computer and then use a backup from the cloud? At&t said that they unlocked the phone but that it needs to be reset in itunes and retored for it to work. However, I do not have access to my computer as I am overseas and need to put a new sim card in. Anyone had this problem and know a way to go around this?

If you have an backup on iCloud. You can restore via iTunes (on every computer) or via your iPhone itself.
And yes, you can restore the backup via iCloud.
To set iPhone to new do this: Settings > General > Reset > Erase all data and Reset all Settings.
It take a while. But after this, you can restore backup via iCloud.

Restore RMAN backup from tape

I have to restore the RMAN full backup from tape to new host to a previous date say March 1st. My target database RMAN retention period is 28 days, today is 11th May.
Is it possible to restore the obsolete database from tape backup to new host as of May 1st. If not possible, I would like to restore the available backup say as 15th April from tape to new host.
Can you please provide me the steps to restore the tape old backup to new host.
Thanks,
Mahi

Can't read documentation? You also seem to be unable to mark questions as answered
Mahi
     Newbie
Handle:      Mahi
Status Level:      Newbie
Registered:      Nov 24, 2010
Total Posts:      24
Total Questions:      15 (13 unresolved)
Sybrand Bakker
Senior Oracle DBA

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

How can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

how can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

One way would be to e-mail them from yourself to yourself. That would totally avoid the different ID issue.

How do i restore a backup in my iphone with the newest version of iTunes

how do i restore a backup in my iphone with the newest version of iTunes?

Go to iTunes>Help>ITunes Help>Add items to iTunes and follow the insructions.

Restore RMAN Backup

Dear All,
I am practicing Oracle Restore scenarios on my Oracle 9i database. Once I complete my tests in Oracle 9i I will move up to 10g and then finally to 11g.
Following is my recovery scenario:
1) I did NOT configure Recovery Catalog
2) I would like to restore my databse from a 15 days old backup
3) control_file_record_keep_time is set to 7 days.
4) Backups are on tape.
Can you guys please shed some light on how to I proceed?
- P

In oracle 9i , check , which situation you can perform complete recovery and in which situations you have to select incomplete recovery.
check the notes by Alejandro Vargas, BACKUP AND RECOVERY SCENARIOS
http://www.google.co.in/#hl=en&q=oracle+backup+and+recovery+scenarios&aq=0&aqi=g10&aql=&oq=oracle+backup+and+reco&gs_rfai=&fp=aa24f2b3591f5f42
[PDF]
Backup and Recovery Scenarios - Backup & Recovery Check List
- 4:11am
File Format: PDF/Adobe Acrobat - Quick View
Oracle Support Israel. User Managed Recovery Scenarios And Configuration .... 4. recover automatic database using backup controlfile; ...
static7.userland.com/oracle/gems/.../BackupAndRecoveryChecklist.pdf
refer this, this will helps you.
Can one restore RMAN backups without a CONTROLFILE and RECOVERY CATALOG?_
http://www.orafaq.com/wiki/Oracle_database_Backup_and_Recovery_FAQ#Can_one_restore_RMAN_backups_without_a_CONTROLFILE_and_RECOVERY_CATALOG.3F
Edited by: rajeysh on Jun 20, 2010 6:36 PM

Restoring Rman backup on New Host with different directory structure

Similar Messages

Maybe you are looking for