Restoring stuck on 'waiting for ipod' SOMEONE PLEAAASE HELP:( lol

my ipod wont finish its restoring it locks up on 'waiting for ipod' x

Nobody from Apple here.  Just users like you.  Perhaps the question is very short on details for anyone to recognize the problem.  What is showing on your iPod screen?  If nothing, try to turn it on.  What is showing then?

Similar Messages

  • Itunes stuck in waiting for Ipod while restore and  0% progress restore bar in the ipod screen

    my ipod goes to the recovry mode
    and i had tryied to restore it
    but it always stuck at  " waiting for ipod " in the itunes
    and in the ipod at 0% progress bar 

    ok so just unplug it restart computer and do this
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • When i try to restore my ipod it gets stuck on waiting for ipod?

    I dropped my ipod and it fell on its back and it turned off and would not turn on again I tried charging it and nothing popped up then I was holding the home buttom and lock screen at the same time then the apple logo showed up then turned off again. It went in to dfu mode. I connected it into the laptop and it had to restor it and it has been on "waitting for ipod" for the longest time I dont know what to do !!

    Try this article:  http://support.apple.com/kb/TS3694
    This is the info for error 9006:
    Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.

  • Ipad 2 stuck DFU mode when restore stuck on waiting for ipad apple logo

    After updating ios 7.01 after a week or less it went blank. After that fixed on itunes restore and update. Gone on 7.04 latest hangs for the 1st 2nd 3rd waiting for ipad....  And finally installed. After 1 day, ipad is on DFU mode and when prompted to iTunes recovery mode restore and update... It hangs saying waiting for ipad no progress...  It stays on dfu mode.

    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • TS3694 No response when restoring. stuck on "waiting for iphone".

    I have an iPhone 3GS running iOS 5.1.1. My phone was working fine, then suddenly went blank. Initally it showed that it needed charging and when I placed it in the charger it displayed the "connect to iTunes" symbol. I connected it to my computer and iTunes stated that the phone needed to be restored before using.
    Ok, so nevermind that I lost any new data and pictures since my last sync. I had to go ahead with the process to try to get my phone back. The restore process started fine and I assume it was going to update to the new iOS 6. After extracting software, verifying with Apple, then preparing ihone for restore, iTunes hangs on "Waiting for iPhone". The phone appears to restart and displays the apple with the status bar underneath, but no progress.
    I have tried this several times. Initially letting it hang for hours. I have restarted the phone and computer several times, changed the usb port, and now have tried it a few more times on a second computer. All with the same result.
    Any ideas?
    Thanks in advance,
    three5eric

    Ditto!
    I too have the same problem. Any luck for you?
    I tried everything possible so far but nothing happened.

  • IPod Touch 2nd gen in recovery mode, stuck in "waiting for iPod..."

    Before posting this topic, I did some searching for the same problem that I had, but I noticed that no one had the exact same problem as me. Most people get error messages in the middle of their restoring or something, but I don't get any error messages at all. The progress bar on my itouch would be full, and it'd stay like that for hours. When I restart my ipod THEN would a message pop up saying I have the (9) error..
    Please help!

    I am also having the same problem after trying to upgrade yesterday. I have uninstalled ITune and reinstalled and still have the same problem. Do anyone have any ideas on how to fix this problem so I can use my IPod?

  • Cannot restore iPod Touch 5g: iTunes "Waiting for iPod"

    SIDE NOTE: For a TL:DR, I've made all the important stuff bold.
    I've been having this issue with my iPod Touch 5G where I cannot restore it no matter what I do.
    This article, This article, This article, nor This article helped me.
    When my iPod is not connected to the computer, it literally does nothing at all, no matter what you do. When you plug it into the computer, the computer recognizes it as an iPod, but it says "Serial Number: n/a", and will not display any info. I can tell my iPod detects button presses because I can connect it and disconnect it just by holding in the Power and Home buttons. After plugging it in, the bar at the top of iTunes says "Extracting software", then after that bar fills up it goes to "Waiting for iPod". It then says "Preparing iPod for restore", and then fluctuates between the last two, once or twice. After that, iTunes gets stuck on "Waiting for iPod", and stays there. The iPod, however, displays an apple logo with an empty progress bar beneath it. I took it to an Apple Store not too long ago, and they couldn't fix it. The employee there couldn't do anything more than what I've done. He said that my only option is to get a new one. I still haven't lost hope, though, because there has been two other cases where I've fixed devices where something like this has happened. It's just not working now.
    Anyways, please help!
    Sincerely, Alex.

    - Try another cable
    - Try another USB port
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Try on another computer
    - Not clear you tried DFU mode and then restore               
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Waiting For Ipod Restore Function error occurred 9

    I try to restore my ipod touch I see the screen with the music icon disc and usb cable.
    It starts to restore but says waiting for ipod.
    I can see the Apple logo and a continuous circle at the bottom rotating clockwise.
    It just stays like that even after several hours.
    I even tried loading the cable that comes with the ipod classic.
    When I disconnect the usb cable it says:
    The IPOD "ipod" could not be restored. An unknown error occurred (9)

    Try forcing your iPod into Recovery Mode prior to restoring:
    Disconnect the iPod from your computer. Hold the Sleep/Wake button (on top) until you see a red slider that says "Slide to Power Off." Drag the slider across the screen to allow the device to power off. Then, press and hold the Home button on the front of the iPod WHILE you are connecting it to your computer... so, hold down Home, connect the USB cable, and then release Home when you see the Apple logo appear. iTunes should state that it has detected an iPod or iPhone in recovery mode, and prompt you to restore it.
    See if that allows you to restore
    CG

  • Waiting For Ipod Issue

    ok i have a 2g ipod touch and i cant restore it i get stuck at waiting for ipod and on the touch screen it shows apple llogo with a loading bar but it doesnt go up
    ive tried
    using itunes all version
    deleting all da itunes app data files
    different firmware, pc's, and ports, nd cables
    i calld apple and they saud bring it into the store and i get another one free but i have no apple store around me
    please help

    Has anyone figured out this yet? We are having the same issues with our iPod touch. Tried to restore it. Did the whole button pushing thing. Plugged it in. It loads all of the status bar and just sits there. There is a window on the computer that just says, "waiting for iPod..." forever. If I stop it or unplug it, it shows the USB and itunes icon on the screen. So I plug it into iTunes again, reload the software, the status bar says that all of the files are loaded, and it gets stuck on the "waiting for iPod...". I live in japan, so I can't just take it to the nearest iPod store. Any help will be helpful. thanks

  • My iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. please help!

    my iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. i've tried to hold down the home and power button and nothing happens!! my computere and itunes recognizes the iPod, but the iPod its self is completely unresponsive!! and helpoful hints?

    See Here...
    AMDS
    http://support.apple.com/kb/TS1567

  • Bought a Brand New iPod touch, my entire music library WILL NOT SYNC (stuck on waiting for changes)

    I just bought a new ipod touch, and I'm really struggling to not throw this thing against the wall.
    My music won't sync. Its stuck on "Waiting for Changes to be applied"
    Im not trying to sync anything else, no video, pictures, apps, anything. Just music. My old iPod touch syncs just fine. I can't restore it, because the restore takes it back to when I was setting the ipod up. I factory reset my ipod many times. I've tried manually syncing songs individually but it hangs on the same spot.
    My mac is up to date, my ipod is up to date, my itunes is up to date. What the **** can I do?

    I have been able to get SOME songs on by doing artist one by one. I also took off all album art. I have only 10 songs or so that I have bought so this is all my own stuff. I just bought a refurbished ipod touch from the apple store. It seems weird to me that it is not all ipods, just some and with the searching I have done, it was mainly Sept to Nov of last year there was issues.... I feel like returning my ipod and hoping I get one with no issues.

  • While restoring Itouch with Itunes it stops at waiting for ipod

    I updated my APPS from the App store last night and during that my itouch reset itself. Now it is stuck at the apple screen. When i follow the instruction to put it into restoration mode it stops at the screen that says, "Waiting for Ipod" I have followed alot of the suggestions people made. I even let it sit on the overnight. I have tried doing this on all 3 of my computers, Uninstalling and reinstalling itunes and even changing users. I don't know what to do. Any suggestions

    ok so just unplug it restart computer and do this
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • Ipod touch 3rd generation is stuck in "waiting for changes to apply" during sync

    My iPod touch 3rd generation is stuck at "waiting for changes to apply" during sync.  I have the latest update and the latest version of iTunes downloaded.  Any suggestions for a remedy to this problem?  Thanks!

    Here is the link for the downgrade from Apple.
    Link: http://support.apple.com/kb/DL1103
    Here is the Link before you install Apple 10.3 downgrade Read Oct. 17th the 1st on of the 17th.where I said "A" OKAY
    Link: https://discussions.apple.com/message/16500143#16500143
    I went into my desktop PC the to Start/My music/iTunes folder.
    In my folder there was nothing called ITunes Library.itl., but I had file called iTunes Library, in the center of it labeled "Lib", so I re-named it to "iTunes Library.itl.backup" Then went to the folder from iTunes" Previous iTunes
    Library" and copied and pasted mine was iTunes Library 2011-04-02 right into the iTunes main folder.
    Close your iTunes folder and then install the previous ver. 10.3 of the Apple link. I did not reboot PC. Did not use Cc cleaner nor add/Remove. then after 10.3 said finished installing 10.3 I clicked on my iTune Icon and iTune came up, iPod not plugged in yet.
    Then I clicked on "let iTune to find all my music and install them", said towards bottom of iTunes.
    Why we don't have the answer but iTune will put all your music in but you will have duplicates of the songs, so you will have your work cut out for you, takes time. plus some of my Artwork was missing, but I save that too.
    I'm not Responsible for this instructions, this is what worked for me.
    I think everything here is in order. Lot of my information came from all of you guys.Thank you. took a lot of reading, and trial and errors 2 1/2 day latter.

  • IPod touch 4th gen won't restore or power on after dropping it on its back "waiting for ipod"

    My iPod touch 4th gen was recently dropped on its back after playing with its case. It turned white, then powered off.
    After that i tried restoring and now everytime itunes stays on the "waiting for ipod" step.
    I know that all functions work because I successfully entered dfu mode many times, and the lcd powers on but the progress bar doesn't move while itunes says waiting for ipod.
    Thanks for looking at my thread and sorry if i misposted (first time apple forum user)

    Something has been jarred inside. Anecdotally, people have reported success smacking their device again, to maybe rejarr things back into working order. But doing that is your call since it could be defined as abuse.
    If it's physically damaged inside, there may not be much of a user fix for you to try unfortunately.

  • [Restore] "Waiting for iPod to become Ready"? [ver 1.2 iTunes 7.0]

    I just updated my iTunes from version 6.0.5 to 7.0. This install also updated my iPod. My iPod is no longer read by my computer or any other. ***? Now when I attmept to connect it to any Mac it freezes up and fails to mount. Come on apple. Also, why the is there no longer an iPod preference section in the new iTunes. I keep trying to Restore the firmware, but I keep getting the "Waiting for iPod to become ready" message.
    Attempted solutions:
    • Re-installing iTunes 7.0 (no luck)
    • Resetting the iPod (no luck)
    • Forcing the iPod into disk mode (no luck)
    • Re-installing iPod software (iPod won't mount...so that didn't work)
    HELP!!!

    You may want to look at this:
    http://docs.info.apple.com/article.html?artnum=61705
    You may want to look at this:
    http://docs.info.apple.com/article.html?artnum=61705
    I had the same problem and was able to fix it by following the directions on resetting the iPod, renaming the iPod and also ensuring that I removed any files that might not be understood by the iPod from the 'notes' folder on the iPod (if you have enabled disk access):
    http://discussions.apple.com/message.jspa?messageID=3111498#3111498
    PS: If you need to get out of the 'Do not disconnect' screen so that you can apply these changes you need to hold down the 'menu' and 'select' or center button until you see the Apple logo. When the iPod mount you can proceed to reset the iPod to original settings which will erase everything from the iPod but not your iTunes library on your computer

Maybe you are looking for

  • Save As function in Labview 8.6

    I am not able to get the "save as" duplicate all dependences function to work as I assumed it would. The function will not allow me to utilize the *.lvlib files names in the project I am copying from into the new project. It gives me an box with "nam

  • Mac Mini - Home Automation

    'just wondered if anyone is using the 'Mini for Home Automation - it would seem ideal (and even more so, perhaps, if a lower-cost cut-down version were also available, then 'could distribute them also task-specifically around the house) Power Mac G4

  • AcroDist.exe-DLL Initialization Failed on logoff/shutdown in XP x64

    Acrobat 9 Pro Windows XP Professional x64 Edition Intel Pentium Dual CPU E2160 1,8GHz 2GB of memory. The title of the window of error is "AcroDist.exe - DLL Initialization Failed" and the message is "The application failed to initialize because the w

  • How to use web services in Excelsius 2008

    I am new  to this tool. I have trial version on excelsius 2008 and i would like to build a dashboard that should query our corporate database (in oracle). I think web services is a option to do it.  Any samples available?.Please help me Edited by: As

  • Injected @EJB not working correctly???

    I developed a simple J2EE Project using Netbeans 5.5. I have the following EJB's: - ShoppingCartBean.java (Stateful Session Bean) - ShoppingCartLocal.java - Product.java (Entity Bean) - ProductFacade.java - ProductFacadeLocal.java The ShoppingCartBea