Restoring the proper operation of the NetBIOS protocol

Hi
How do I restore the proper operation of the NetBIOS protocol
in Windows 7 Ultimate SP1 64-bit?
Thanks
Bye
Balubeto

Hi,
I guess you're looking for nbtstat command?
http://technet.microsoft.com/en-us/library/cc784285(v=ws.10).aspx
If you encountered some problems about TCP/IP or NetBIOS Network Connections, you can refer to this link for troubleshooting:
http://support.microsoft.com/kb/323388
Yolanda Zhu
TechNet Community Support

Similar Messages

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

How can i restore the deleted accidently bookmarks ? is there trash or bin for deleted bookmarks , like opera browser ?

how can i restore the deleted accidentally bookmarks ? is there trash or bin for deleted bookmarks , like opera browser ?

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).
That only works if you haven't closed Firefox.
Otherwise you need to restore the bookmarks from a JSON backup.
That will replace all the current bookmarks and you lose bookmarks that were added since that backup was created.
See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

HT201250 I just had a new hard drive installed in my iMac. Migration manager cannot see my external Time Machine hard drive to restore the files and applications. The drive is operational in Finder

I cannot seem to migrate the full time machine backup from an external hard drive back to the new hard drive. Finder sees the drive and files. When I use Migration managers, it only sees the computer hard drive after I select the time machine option to restore the files.

Welcome to the Apple Support Communities
With what OS X version did you make the backup? If it was the same as the version you are using now, you don't have to use Migration Assistant to restore the backup. Instead, there's a safer and better method, but you will lose all the changes you have made since the last time you made the backup.
Just hold Command and R keys while your Mac is starting to start into OS X Recovery. Then, select the option to restore a Time Machine backup, and follow its steps. Also, you will be able to select the backup you want to restore

Can Time Machine Restore the whole operating system ?

Hi there,
I understand Time Machine can be used to locate files which were accidentally deleted.
But can it restore the whole OS system together with all the settings to say a 2 weeks ago ?
If can, I desperately beg someone to be kind enough to guide & teach me how to do it step by step.
Many thanks

RyanManUtd wrote:
Question 1:
I am doing a full restore on the same Mac. For avoidance of doubt, can you kindly confirm that the first paragraph of item#14 does not apply to me ?
Yup. This works fine if it's the same Mac. That's what it's intended for.
Question 2:
I have a Lacie Firewire800 external HDD connected to my Mac, I have already updated & backup data on this Lacie FW800 HDD to yesterday.
As I intend to restore the entire system to 2 weeks ago, I am afraid that my Lacie would also be restored to 2 weeks ago, would it ?
When you say "entire system", it refers only to the Mac internal harddrive or everything connected to it ?
Ah, yes, that's a bit misleading. That procedure will restore your internal HD only. By "entire system," it really means everything on your internal HD (which is all most users have): OSX, apps, configuration, users, settings, preferences, data.
If you want to restore an external HD, you must do that separately, so your LaCie won't be touched. Just to be extra-safe, I'd eject and disconnect it if I were you.

How do i reinstall lr5 and restore the backup catalogues. Also preset folder,preferences, preview

Recently, i had to do a clean re-install of windows 7hp. And also i saved the needed data. of course i lost all of my downloaded software etc. Their is a second drive on my computer with lightroom;its backups and a folder entitled all my photos. The same material for lightroom is backed up to an external hard drive. How do i go about re-installing lr5 , and restore the catalogue back ups and the other folders.? I need a step by step set of procedures here as i am a computer stupie. Thanks for your help!

redfordl2012 wrote:
Have a few questions before i do the reinstall. step #1 is to reinstall from the original disk or to download from adobe"s website with proper serial #,regeistration #? Step #2 is to restore the catalogues by double clicking on the latest catalogue backup?(or are all backup catalogue"s clicked) When i do this backup will this transfer all of my parent folders,subfolders to the left panel of the library module in its original order? Step 3. After the catalogue restore is done, will this leave this cat. folder in the same disk under lightroom or will this folder be deleted. I have all of the lightroom folders backed up on an external hard drive. Last step is to move all my pictures from the all my photos folder to lightrm. Is this correct? How is this done? By an import in the lightroom software using import,move.or copy on the top import toolbar. I know i sound paranoid on doing these procedures correctly as i do not wish to lose any catalogues etc.. Thanks for your help!!
Not sure where you came up with these steps from
Step 1 ... either should work, but the download is the most recent version
Step 2 ... double-click on the latest catalog backup, yes
Step 3 ... Catalog is whereever you double-clicked on the backup file, you can move it whereever you want thereafter, using your operating system with Lightroom closed
Step 4 ... no moving of photos should be needed, definitely NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING, if the photos are not linked in Lightroom, then follow these instructions http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm and remember NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING and did I mention that you should not import your photos?
For future reference, you stated that you had Lightroom and its backups on the same drive ... do not do this ... backups must go on a different physical drive

How do I restore the "close tab" button to the END of the tab bar, WITHOUT USING AN ADDON

Up until FF31, I used to have the following setting configured which moved the little 'X' button that closed tabs off of the tabs themselvs and onto the far right of the tab bar.
browser.tabs.closeButtons; User Set; Integer; 3
No, this no longer works. It has still moved the close buttons back to the tab buttons. Until I can figure out how to fix this, I will be moving back to a previous version. I can't for the life of me see why this feature was removed, other than Mozilla's seemingly arrogant insistence that it knows what people want better than they do.
I was since told by someone that I can use an addon to fix it, yet the problem is THEY DO NOT WORK. The addons that supposedly solve this all have intermittent failures where they don't load correctly, leave random dead tabs open, and in one case it even seemed to open new tabs when I tried to close one.
It's absolutely inexcusable that the dev team is so arrogant to take away a feature that has fundamentally no impact on the rest of the browser, other than, as I said before, they THINK they know what we want better than we do. It's no small wonder that FF is losing market share. The only thing keeping me on board was really this function, as I prefer this layout, and if it's gone, I see no reason to stick with FF over others.

unfortunately it is not possible to restore the close button to have only one (customizable) close button on the Tab bar without using an extension.
The extension is necessary because you need to create a new toolbar button and bind the proper code to it to make the button act as a tab close button (command: BrowserCloseTabOrWindow()).
*tabs closebutton restored: https://addons.mozilla.org/firefox/addon/tabs-closebutton-restored/
* http://cat-in-136.blogspot.co.uk/2014/05/note-do-same-without.html

How do I restore the settings for apps using Time Machine?

I believe there are problems with items within the Library Folder inside the System Folder. For example, there are two "Frameworks" Folders, but one has "(from old Mac)" after its name. I dare not try to remove or even move either.
Back in the day of OS 9, you could modify something, then search for it by "Last Modified" Date, and find where Apple has hidden itscontents. It's not so easy in OS X. I've had some success using Pondini's Time Machine FAQ's, though. Here is how I got to this problem:
Our family MacBook died. After getting a repair estimate of $500 to $700 "if it's the Logic Board," we decided to replace it. We purchased a MacBook Pro running Lion. (Later, we brought it to an Apple Store and were quoted $435 in house or $280, but they would have to send it out. Incredible repair: Logic Board, Top & Bottom Case, Super Drive, Battery, all for $280. No wonder they're #1). I pulled the Hard Dive out, erased it, and installed an older operating system, but during the repair they installed 10.6.
Restored the MBP from the TM backup of the MacBook. OK
The Macbook is repaired and the store showed me how to restore the data from the TM backup.
Restart and the passwords do not work due to restoring a 10.6 machine from a 10.7 backup.
Tech support guides me through resetting an admin password using the password utility on the install DVD.
changed the other passwords inside of Accounts in System Preferences. Then changed the password or the other Admin.
Restart, get a circle with a line through it.
Tech support guides me through fixing this.
Restart, half my Apps do not work.
Tech support says to re-install 10.6.
I did but I thought it would erase and install but it just re-installed 10.6.
Most Apps work, except iPhoto. Mail is OK sending but only receives on one of 3 accounts.
Is there a fix for iPhoto & Mail? If not, I would plan to erase and use the finder to drag the user folders from TM to the MacBook. Can I just drag the Apps too? How about all of the settings for those Apps?

If you don't keep a backup, you can't restore your machine to any state except the state in which you received it, brand new, with none of your own stuff on it. That makes a pretty convincing argument for backing up, doesn't it?

Is there a way to restore the earlier color-coding format?

If there is a workaround to restore the earlier color-tag format, I would love to know it.
In the alternative, I've submitted the following to Apple and wanted to share it with the community also, in case there is no workaround and others would like to add their voice in addressing the issue:
The new single-dot color coding of tags in Mavericks doesn't work for me AT ALL.
I have been relying on Apple's full-width color coding for quite some time because it could help me easily discern—at a glance—different file versions, project statuses, and other workflow particulars—without having to read the filenames' text. In other words, it's been a convenient right-brain workflow.
The key here, of course, is the idea of "easily" and "at a glance." The new Mavericks color coding both extends and confounds my workflow—I now must do an additional visual search of any given list of files, especially because my filenames are often long (informational) and their middle section (in the column view) is likely truncated to conform to Apple's default narrow column formatting.
The purpose and point of color coding is to reduce time and complexity and aid organization. However, the Mavericks version now requires (1) doing a visual scan of an entire column of filenames, instead of a visual "grab" of whole bands of color without any need to read the filenames, (2) locating the color dots at the ends of those column lines and making sure they correlate with the proper text (left-brain/right-brain work instead of just staying right-brain), (3) making a color comparison of extremely small fields of color (tiny dots instead of full-wide bands), and (4) implementing a visual/mental check step to ascertain that that a particular color dot is the correct one. Because of the added confusion of having to do "manual" left-to-right visual placement, it becomes necessary to add the step of expanding the filenames (column widths) to get certainty.
I'm guessing that at this early point in the Mavericks proliferation you'll likely want to dig your heels in to defend and preserve all the involved and extensive work you did to produce the update, but I strongly urge you to revisit the particular design decision mentioned here. It makes it tougher for us out here using the program, and it works against your PR efforts: I'm now less likely to trust your design decisions and will be much less likely to implement future updates or champion them.
If I could uninstall Mavericks and get my previous version back, just for this one item alone, I would. It's been a mainstay feature for me, and one of the things I've lauded to non-Mac users to encourage them to venture Apple.

Downgrade Mavericks to Your Previous System
For Lion or Mountain Lion
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to a Mountain Lion Installer app or USB flash drive installer:
   Partition and Format the hard drive
      1. Select the target volume you wish to use.
      2. Select Disk Utility from the Utilities menu in the menubar.
      3. In Disk Utility select the target volume from the left side list. Click on the
          Partition tab in the Disk Utility main window. Set the Partition Scheme to one
          (1) from the drop down menu. Set the Format type to Mac OS Extended,
          Journaled. Click on the Apply button and wait until the process has completed.
          Quit Disk Utility and return to the main menu. Quit the Main Menu to return to
          the installer.
Install Lion/Mountain Lion: Select install Lion or Mountain Lion and click on the Install button. .
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
For Snow Leopard or Earlier
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

Restore the hard drive to the factory WinXP OS image - T60 1951-A31

I'm trying to restore the hard drive to the factory WinXP OS image on a number of 1951-A31 ThinkPad T60.
Found these instructions in the trouble shooting guide:
1. If possible, save all your files and shut down your operating system.
2. Turn off your computer for at least 5 seconds.
3. Turn on your computer. Watch the display carefully. While the message, “To interrupt normal startup, press the blue ThinkVantage button” is displayed, press the ThinkVantage button. The Rescue and Recovery workspace opens.
4. Click Restore your system and follow the instructions on the screen.
The problem is that Restore your system does not appear.
I found a thread on Thinkvantage looks promising: No Restore Option
The thread has this:
04-03-2009 12:55 PM
kamszelei, welcome to the forum,
from a lurker
which version of Think Vantage System Upate do you have installed?
If you have version 3.13.0009 installed please try the following; boot into Windows and run TVSU. It'll update itself, restart, then update itself again. Hopefully the option to recover to factory content will then be available to you.
Please also check the following registry key; HKLM\Software\Lenovo\TVT Common
If the "System Type" key is 1, change it to 0. If it is already set to 0 don't change anything and let us know
Unfortunately my Thinkvantage update system is saying it cannot connect because it is not running
Here are my questions about ThinkVantage:
How do I get Thinkvantage update to run?
How do I find the version number for Thinkvantage
How do I "boot into Windows and run TVSU
My other question is this:
Can I simply buy the backup DVDs with the original XP?
Thanks
(mod edit: fixed broken link)

You need to have a harddrive installed that contains the original system restore partition, many people delete them because they are redundant and use up space and after a while, most of the content is outdated, meaning it will install 4-5yo system and software that you'd only want to replace or update anyway. I prefer to install from a windows setup disc, but you can buy the restore sets, it's a set of 7 or 8 CDrom, not DVD discs. Lenovo sells them I believe, or if you can find someone willing to copy a set and send them to you, it would save you some money. I can tell you that if I had a several of these to do, I'd much rather use a single windows setup disc, preferably one with the latest service pack and updates, so I'm done after a few mins and one disc, opposed to installing many discs, changing from one to the other, then in the end downloading and installing service pack three, then a few dozen hotfixes, it could turn into hours of work on each unit, but if you want them with all the preloaded software, then that is the only way. Good Luck
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

How do I associate the itms protocol to iTunes in Windows Vista?

Apparently when iTunes installed on Windows Vista it didn't properly associate the itms protocol. So when I click on a store link from a web browser it brings up an error in Firefox about the itms protocol not being associated with an application. Similarly a link in IE7 will just redirect to the iTunes download page.
How do I add this protocol in manually?

Okay I too have been plagued by this problem on two different machines, 1 is vista Enterprise 32 bit and another is Vista Ultimate x64 bit, however both have the exact same problem. I just fixed the problem on my 32bit enterprise machine and I am assuming the same fix will work for my 64bit when I have time to try tomorrow.
If your problem is the same as mine, you are not able to access itms, itmss or itpc protocols from neither FireFox or IE under vista, this may apply to other windows OS versions but so far the majority seem to be vista.
First let me rant, I think it is a quality/permissions issue and is a matter of either apple not adding quotes in the 3 protocol registry entries or Microsoft not allowing apple the appropriate permissions to change those settings when you upgrade to a new version of iTunes. So none the less it is ridiculous no matter what the reason is and there is no excuse that something so simple has to be solved by Joe average and not resolved by either one of these companies.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
SOLUTION AS FOLLOWS:
NOTE: As always back up your system restore point and make a
copy of the registry or the sections of the registry
you are editing!!!
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
You need permissions set to the following registry paths under
HKEYCLASSESROOT\itms\shell\open\command
HKEYCLASSESROOT\itmss\shell\open\command
HKEYCLASSESROOT\itpc\shell\open\command
You may not see these as you reset permissions and have to go as far as adding a new key under each registry key, then it will show you your newly added key (just delete) and then set the appropriate permissions to adminstrators group on each until you get down to the "command" key.
Then once you are in the command key edit the following string that should show
C:\Program Files\iTunes\iTunes.exe /url "%1"
and change it to...
"C:\Program Files\iTunes\iTunes.exe" /url "%1"
yes I know, ridiculous that it is a matter of quotes missing, but that is what fixed it for me.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Good luck!
Message was edited by: Ross-School-of-Business
Message was edited by: Ross-School-of-Business
Message was edited by: Ross-School-of-Business

HT1937 I tried to update to the newest version for my iphone and for some reason I am getting a restore the iphone on my phone and computer. Why is this happening, I dont want to loose all my info and have to put it back in.

Help Please!! my computer won't finish my update for my iphone and it says it needs to restore my iphone. I don't know why it is doing this? If I restore the phone with itunes it will wipe out all my media and contacts and I don't want to do that. But I can't use my phone it just shows a pic of a usb port plug in to a itunes note. Can anyone answer how I can get the iphone back to normal because I can't even use it.

Monday I ended up on the phone with Apple Support just to be sure I was doing the right thing and to check my back up info so I could be sure I didn't loose important data. They were very nice and helped me finish the process. When I told the tech that I couldn't download the new update and install from my iphone that is when I went to the computer and that's when I got this recovery mode thing on my phone. He told me there must have been a problem and that is why he thinks I couldn't down load it from the phone. I had to go to ITunes on my computer. Once we did the recovery we were able to check that I had a back up from the day before, so I didn't loose anything. He stayed with me til the process finished. I also found out I can prevent the auto sync for the future by setting the directions on that.
I am good now and my phone is operating fine, with the new update. Thank you all who commented back to me.

Is iTunes 11.1.5 compatible with Mac OSX 10.6.8? If not how can I restore the previous iTunes version?

Problem: Recently when I open iTunes it doesn't work; the little pinwheel just keeps spinning.
I have tried leaving it on, as suggested by another user, for over 12 hours. I didn't work.
I think the new iTunes version, 11.1.5, is not compatible with the operating system; Mac OSX 10.6.8. If this is so, how can I restore the previous iTunes version?

You need to be updated to iTunes 11.2.2.
You might want to consider running the combo updater over your install to refresh your files.
Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
http://support.apple.com/kb/DL1399
After running the combo updater, select Software Updater and update iTunes.
If iTunes fails to open after updating, hold down the Option key when launching iTunes. It will ask you to locate your iTunes Library.
Note: I've seen users with their iTunes Library on an external drive spin like this when the drive was failed to be seen in Disk Utility. Run Repair Drive on the external drive to fix this issue.

How to restore the R12 from backup?

Hi,
My OEL5 get crashed due to bad sector in hard disk drive in which I have installed R12.I have already copied the whole d02 directory of R12 to another hard disk drive.Now I want to restore the same d02 directory in newly fresh installed OEL5.How should I proceed?
Regards
GSM

Hi,
Thanks.
Application Log fiel:
11/05/31 06:56:30.14 10.1.3.4.0 Started
11/05/31 06:56:39.664 html: 10.1.3.4.0 Started
11/05/31 06:57:41.90 html: Error initializing servlet
java.lang.NoClassDefFoundError: Could not initialize class oracle.apps.fnd.profiles.Profiles
     at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:239)
     at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
11/05/31 06:57:41.92 html: Servlet error
java.lang.NoClassDefFoundError: Could not initialize class oracle.apps.fnd.profiles.Profiles
     at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:239)
     at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
Apache Log file:
[Tue May 31 06:56:19 2011] [notice] configured -- resuming normal operations
[Tue May 31 06:56:19 2011] [notice] Accept mutex: fcntl (Default: fcntl)
[Tue May 31 06:57:40 2011] [error] [client 127.0.0.1] [ecid: 1306805260:127.0.0.1:5529:0:1,0] File does not exist: /d02/oracle/abc/inst/apps/abc_a/portal/favicon.ico
Regards
GSM

Restoring the proper operation of the NetBIOS protocol

Similar Messages

Maybe you are looking for