Restoring Time Machine Backup on new SSD

Using STOCK HDD 500GB 5400RPM, Have a Time Machine backup on an external Seagate USB 3.0 drive, about 140GB used on my disk, if I restore to a 240GB SSD will it work smoothly or will there be problems due to the lower capacity on the 240GB SSD?

Andyl1980 wrote:
I am wondering if restoring the time machine backup that i currently have on to the new SSD after i have installed it by holding down the OPTION key at restart and selecting RESTORE FROM TIME MACHINE....
This is the best option if you want to keep everything you had on your old hard drive.
Another option you have is to reinstall OS X through OS X Recovery (hold Command and R keys while your Mac is starting up) and then, restore the backup during Setup Assistant, so you can choose what you want to restore. This may give you better performance, as OS X will be cleaner

Similar Messages

  • Restoring Time Machine backup to new drive in G5 iSight

    Hi all
    I successfully replaced the hard drive in my G5 and installed OS 9. Man, what a chore to get into the old beast.
    However, I have not been able to upgrade to Leopard using my upgrade disk - this is to bring it back to the same OS as before the HDD upgrade.
    Now I need to restore the Time Machine backup but when I try to boot off the Leopard disk it fails.
    Are there any other ways to get the G5 to see and restore the Time Machine backup?
    Cheers
    Scott

    So, You're saying I can do this from a different computer with its own Time Machine?
    In other words, I have my Time Machinedrive  from the dead iMac and a fresh, formatted drive both hooked up to an unrelated computer with its own Time Machine.
    If I enter Time Machine on that computer won't it show me the data it backs up for that computer only?
    Will Time Machine know that there are two Time Machine backups (the one from the iMac and the one from the new host machine), and allow me to select the one from the iMac?

  • Restoring Time Machine backup to a drive in a "Voyager Dock"

    Restoring Time Machine backup to a drive in a "Voyager Dock"
    I would like to restore a Time Machine volume to a hard drive not installed in the computer it has backed up.
    I have an iMac 24” with a failing drive. It will eventually need to be replaced.
    I have my Time Machine back up for this computer in a Voyager Docking station.
    I would like to have Time Machine “restore” the iMac’s data to a drive in another Voyager Dock running from a computer other than the iMac involved.
    What I hope to do is bring the “restored” drive and the iMac to my Mac service provider and just have them swap the old drive for the new.
    How do I get Time Machine to do this?

    So, You're saying I can do this from a different computer with its own Time Machine?
    In other words, I have my Time Machinedrive  from the dead iMac and a fresh, formatted drive both hooked up to an unrelated computer with its own Time Machine.
    If I enter Time Machine on that computer won't it show me the data it backs up for that computer only?
    Will Time Machine know that there are two Time Machine backups (the one from the iMac and the one from the new host machine), and allow me to select the one from the iMac?

  • Migration assistant crashes when restoring time machine backup from mountain lion

    Hi
    I installed a new HDD in my MacBook Pro Mid 2009, installed the original OS again and tried to import using the Setup/Migration Assistant. It told me that since the time machine backup is newer, this can't be done. So I first upgraded to Mountain Lion (suspecting that I can install my SnowLeopard TM-backup there) and tried the same. The migration assistant started, found the image (on Tiime Capsule) and started to calculate the items that need to be transferred. After 17hours, I interrupted it.
    Next thing was to upgrade the old HDD with mountain lion, create a fresh TM backup of this on an external USB drive and try the same. It finds the image, identifies the files (about 420GB), I can see the users, all fine. When I hit Next, it starts to calculatate of locate the files. I assumed that my drives were not the fastest ones so I did expect it to take a while. This time I interrupted it after 34hours as it was still giving me the "progress" bar.
    For all I know, I have a TM-Backup of Mountaion Lion and a freshly installed Mountain Lion and I am using the Apple software for transfer - perfect world, no?
    Any ideas?
    Thanks
    patPfe

    The migration assistant or the original backup?
    I tried WiFi, Ethernet and on the second attempt with a fresh backup on a USB drive.

  • Mac Mini late 2012 Failed to Restore Time Machine Backup

    Try to restore time machine backup to my mac mini. I have made backup right after I got the machine from apple. Now due to some reason I am trying to restore it but failing again and again. Error is something like this:
    I have erase disk as default which is required for intel based model but still it didn't work. Please help me out.
    Further I have also tried installing fresh 10.8 OSX by making bootable usb. It also didn't work. A question mark appears right after I select USB Bootable Drive at start.
    Thanks

    Yes same. When I try booting MBP with same usb it goes to recovery menu, (one which comes when you press Cmd+R) I think my MBP is running mavricks thats why it dont go to 10.8 setup. Further when I select same usb in mac mini it shows following screen.
    Content of USB are:

  • Upgrade to SSD and restore Time Machine backup

    Hi, I tried to install a new SSD on my MacBook Pro Late 2008, but I can't restore previous backup made with Time Machine.
    I tried two way:
    1) restore backup from bootable DVD, but in the selected disk the system can't find the backup;
    2) restore from migration assistant, but the system does not recognize the external disk as Time Machine backup.
    In past I restored many time the backup, but in the same HD, now the transfer to HD to SSD seems doesn't work.
    Please help me!

    I'm having the same problem
    I've just installed a SSD on my Macbook Pro (late 2011) and i'm having real problema on restoring backups from my old HDD.

  • Issues with restoring a Time Machine backup onto new Macbook Pro Retina

    I recently got a new Macbook Pro Retina and I've been trying to restore a Time Machine backup made today from my old Macbook Pro laptop. I didn't restore from the first start up (foolishly, seemingly) simply because of the trivial reason of wanting to see the system all clean and new.
    I've tried the Migration Assistant but it gets stuck on "looking for source..", despite having the ex.HD plugged in and double checking the existance of the backup itself on the ex.HD.
    I've also tried booting the laptop up in the 'restore' mode (cmd R) and restoring from there but it sends me in a constant loop of 'this backup was from a previous model of laptop' or something to that affect. It also doesn't display the recent backups at all, only displaying those from the beginning of this year for some reason. All backups are in the same place on the ex.HD so its not an issue with locating the backups.
    Really stuck on this one! Would really appreciate some help!
    Thanks a lot, and merry Christmas

    Yes, you can restore to another machine if needs be.

  • Unable to restore time machine backup onto a new hard drive

    I recently bought a new hard drive for my mid-2010 white Macbook. I have kept this computer regularly backed up with time machine, but just to be sure I made sure I hooked up my external hard drive prior to changing the hard drive and made sure it was fully backed up. I checked my exceptions and saw that my system files and applications were listed, so I removed them from the exceptions list and let it back up again (it only backed up a further 60MB though, so that made me a little uneasy).
    I successfully switched over the hard drive and then plugged in my external hard drive so I could do a restore from Time Machine. My external hard drive has 3 partitions: 2 time machine backups for each of my computers, and one partition for storing files that also has an old copy of 10.6 on it.
    When I booted the computer, I held option, then selected Macbook TM. When it came to the window with 4 options, including disk utility and restore from time machine backup, I selected restore from Time Machine backup. When I did so it said "No OS X Backups Were Found." Why wouldn't it have backups listed if I have been consistently backing it up? How else do I do a full system backup?
    Also, how can I be sure that I'm restoring this backup onto the new hard drive? It didn't prompt me to select that drive at any point, and I want to make sure I'm not overwriting the middle partition on the backup drive (or anything else).

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • Problems trying to restore Time Machine backup to a new computer

    Hi there-
    I recently purchased a new MacBook Pro and want to downgrade it from Lion to Snow Leopard. I have Time Machine backups from my slightly older MacBook Pro running Snow Leopard. However, when I attempt to restore from the Snow Leopard backup, I get a message stating I can't restore that backup because it was done on a different computer. Is there a way around this so that I can essentially just overwrite my new computer with my latest backup of the older running Snow Leopard? Thanks in advance-

    I should say though, I don't know for sure if a complete disk wipe will allow you to boot off the 10.6.3 Snow Leopard disks or not, as I don't fully understand how the firmware works. There are two parts I know of, the hardware firmware and the EFI software firmware.
    EFI supposedly has it's own partition on the drive, which should be able to be completly erased.. When I installed rEFIt however (it's a alternate firmware allowing me to boot other operating systems), it required two reboots for it to take hold.
    I also should say I've never taken a factory Lion installed machine and put Snow Leopard on it.
    So far what I've been able to determine is the firmware is blocking the booting of the 10.6.3 disks (the only retail version there is) so you can't install Snow Leopard, if the firmware can be flashed to a earlier verison the 10.6.3 disks should boot as the hardware drivers for 2011 MBP's reside on the 10.6.3 disks.
    But if you have a second Mac, then the target disk mode of the link above should work, you can also create a large  HFS+ journaled partition in Disk Utility in Lion and then use Target Disk mode of the other Mac to install Snow Leopard there.
    I wish you luck, you might have to visit MacRumors or another Mac site to get further information. The Lion machines are very new, Apple is resisting attempts to downgrade from Lion to Snow Leopard and not many have done it yet.
    I bought my machine pre-Lion so I can stick with Snow and avoid the Lion pain, but have it on another older Mac for experimental puposes (quad boot).
    I'm pretty sure rEFIt will allow you to boot off the 10.6.3 disks.
    I'm sorry if I couldn't have been more help, I'm still learning how to get around this 10.6.3 block myself.
    If I had a factory Lion machine, I would most certainly post a blog how to downgrade the SOB to 10.6 somehow.

  • Can I still use my "old" Mac after restoring Time Machine backup to a new Mac?

    Hi guys.
    Will I still be able to use my old Macbook Pro 2008 (Leopard) after restoring his latest Time Machine backup on a new Macbook Pro 2012 (Lion)?
    Using Setup Assistant and transfering data using Time Machine creats the same Account on the new machine that was on the old one. I just don't know how the old machine will react towards his clone. I don't want to make a mess...
    Please let me know.
    Thanks

    It should work if the drive is connected directly to your Mac. That is not the same as saying that it will work.
    Since Mountain Lion was just released, it might make sense to hold on a few weeks and watch the forums for new and unforeseen issues before you dive in.

  • Help with Restoring from Time Machine Backup with new Hard Drive

    Hello. Recently, my hard drive died in my 24" Early 2008 Aluminum iMac. Luckily, I had a time machine backup, and I took it upon myself to replace the 320 GB Hard Drive with a 2 TB Seagate Barracuda disk. The hardware replacement (although difficult) went fine. Now, I'm having a bit of trouble restoring the new drive from my time machine backup. The new disk shows up in Disk Utility with the correct capacity. I formatted the new drive with Mac OS Extended (Journaled) using my installation disk. My only problem is that the drive isn't showing up when I am choosing which drive I want to restore my time machine backup onto. I can pick out the backup I want perfectly fine, but I can't find the new drive. Any help?

    UPDATE: I restarted it (Classic IT Crowd "Have you tried turning it off and on" moment) and the drive shows up on screen. Right now, I'm waiting for it to "Calculate disk size needed for restore" and I'll keep you posted.
    UPDATE 2: Currently restoring. Let's see if it's successful.
    Message was edited by: funman895

  • New Macbook Pro Restore Time Machine backup?

    How can I restore a time machine backup on a new MacBook Pro? 
    Thanks!
    Damien

    Not brand new, a few months old, already installed progams I wanted to carry over.  Now i was trying to do the Migration assist for the files I want and now I'm getting this message:

  • REstoring from old time machine backups on new install

    Hi, I've been looking for good documentation on this and haven't seen an answer yet.
    I want to blow away and reinstall my OS (10.5.1) I made a full backup to my time machine disk and I had planned on reinstalling the OS and all my apps for a clean start, then when the time came to move my photos and itunes back just connect my time machine disk to the new installation and copy the data back. Once I was satisfied that everything I needed was restored from the time machine dist to the new install I would go ahead and re-enable time machine on the new install and blow away my old backups starting from scratch. Has anyone done this yet? I do not want to plug in the old time machine disk and not be able to access the data that was created by the old installation. I would be bitter to say the least. Before anyone suggests another means of backing up I have thought of that, but, I'd like to see if this works.
    I understand the scenario of beginning an install and choosing to restore that way, but, the reason I'm reinstalling is to start with a fresh OS form scratch an be able to restore selectively.
    Thanks for reading my wordy post, I look forward to hearing back!
    Thanks again

    I think I'm facing the same issue as you. I ran Time Machine on my MBP. Now I've bought a new iMac. I started it with the Leopard CD and instead of installing Leopard on the new machine, I selected Restore from Time Machine Backup (or something like that). Everything from my old machine is now on my new machine. Sweet!
    Only one problem. I've now enabled Time Machine on the new iMac and it tells me that there's not enough room on my external 320 GB drive for its first backup. It also tells me that its first backup will be 112 GB in size! This large size leads me to conclude that Time Machine will not add to the backups from the old MBP, but instead start a new series for the new iMac. To confirm this, I looked on the backup drive.
    On the external backup drive, there are a series of 4 KB files, one for each machine that has previously been backed up. These names are nearly identical to the machine's MAC address (which you can find by open Network Preferences > Airport > Advanced). Time Machine will create a sparsebundle file for each machine backed up over the network; its name will have the format MachineNameMacAddresssparesebundle (Backups made when the backup drive was connected locally are saved in a folder called Backups.backupdb). So, to delete an old backup from a machine you're not using any more, you need to delete the 4 KB file containing the machine's MAC address, AND either the sparsebundle file OR the machine names' folder inside the Backups.backupdb folder.
    Hope this helps.

  • Restore iphoto library from crashed mini Time Machine backup on new mb pro

    Hello,
    My old mac mini is gone and I have a new macbook pro. Now I want to restore my iphoto library (260GB) from the most recent Time Machine backup but how can I do that without restoring the whole machine back? The problem is I don't have the needed space for the whole machine restore on my mb Pro. The new Pro is 500GB and the mini backup is 900gb. Even my user restore from the migration assistent can't complete because the space isn't there.

    I Found it, i need to browse in finder to the time machine file in de folder where the backup is located. After I mount the file I can open timemachine with ctrl+click and open another timemachine backup. Select the mac mini backup and browse and restore. Wow I love, you only need to know how to do it    thanks for the replys

  • Restore Time Machine backup after hard drive crash

    My hard drive on the mac book crashed, so I replaced it.  Now I need to get my time machine back up on the new drive.  I've already started using the computer and reinstalled lion, so I'm not getting the original "backup" screen.  How do I find my old time machine backups?

    Your best bet is to do a full restore from your backups.  See #14 in Time Machine - Frequently Asked Questions.

Maybe you are looking for