Restoring variants during upgrade

Hi All,
We are in process of upgrade from 4.6c to ECC 6.0.
I would like to know the tools used to handle variants issues while upgrading to ECC.
It would be of great help if you can tell the different activities to be carried out for restoring variants (Display variants and Variants for Background jobs)
Before upgrade
During Upgrade
After upgrade.
We are looking for specific technical learnings and observations, like performance issue and other issues observed while upgrading.
Please mail me, if anyone as such specific learnings or observations while doing upgrade project
Thanks in advance

See if standard SAP program RSVARDOC_610 (or something like it) exists in your system.
Rob

Similar Messages

My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer.

My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?

Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US

I just got my shipment and My Ipad mini is just shut down without reasons during upgrading. I'm doing restore it. Does it matter for the future use?

I just got my shipment and My Ipad mini is just shut down without any reason during upgrading. I'm doing restore it. Does it matter for the future use?
ACtually I really really don't want to use it anymore. I'm so disappointed.

PolishAngel756 wrote:
Some friends have told me that their phone can last up to 2 days without charging??
If they are getting 2 days without charging, it's unlikely they use their device very much.
A full day is pretty good....and if I'm careful, I can easily get a full day of usage.
For me, normal is charging the iPhone mid afternoon at work, but I use it a lot.
My typical usage is 35 mins of listening to podcasts, checking email, checking my RSS feed, and checking a few apps while I ride my bike when I first get up. Then listening to several podcasts at work.
I typically stream music while working out during my lunch hour and use the Men's Health Fitness app to track my progress.
By about 2pm I'm ready to charge the device as it's getting low (somewhere between 20% and 50%).
I leave bluetooth, Wi-FI, and location services turned on all the time.
Personally, I just do not see the point in going into settings to turn on the feature when I need it... just too much hassle. All of my listening to podcasts and music is via Bluetooth.
I know I'm not the heaviest user, but I just do not see how anyone can realistically make it two days on a single charge, it makes me think they simply do not use the features of the device and would be just as well served with a basic or feature phone.

Error while runnning autoconfig on apps tier during upgrade

Hi,
Error while runnning autoconfig on apps tier during upgrade from 11.5.9 to 11.5.10.2
below is the error message.
Enter the APPS user password :
The log file for this session is located at: /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /u01/app/tinst/tinstappl
Classpath : /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/jre/lib/rt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/dt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/tools.jar:/u01/app/tinst/tinstcomn/java/appsborg2.zip:/u01/app/tinst/tinstcomn/java
Using Context file : /u01/app/tinst/tinstappl/admin/TINST_dba5.xml
Context Value Management will now update the Context file
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:759)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:147)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:128)
at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1762)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
... 8 more
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
/u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
Please let me know your suggestions to resolve this issue.
Regards,
Sreenivasulu.

Hi,
DB tier autoconfig was successfully completed.
We have already checked the above mentioned metalink ID's, but still the issue is same.
Can you please advice any other solutions.
Regards,
Sreenivasulu.

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Error in transaction KEA0 during upgrade

Dear All,
During upgrading the custmer system from 4.7 to ECC 6.0 we found some error in the transaction KEA0 while trying to activate the cross client for an operating concern.
The activation logs says that there are the syntax errors in the gereted subroutine pool: RK2O0100.
I however corrected the error and activated the code but again when I am trying to execute the same it gave me the same error and when I go to the sub routine pool I found that the changes are again undone and the previos version is activated. This happens repeatedly that the code is corrected and activated by me and says no error and ones I log off and login again it says the same error.
Help will be appriciated.
Thanks iin advance....
Abhi...

Dear Raymond,
Thankds for your help..........
I tring to run RKEAGENV it shows the error message with STOP button saying that the field WTGBTR not contained in the nametab for table CE1E_B1 and when Io run RKEAGENF it gives a short dump saying that entry for CE10100 is not allowed for TTABS.....
Please help.

Disck Space not enough during upgrade CUCM 9.1(2)SU1 to 9.1(2)SU2a

Hi,
I face an issues during upgrade my current CUCM 9.1(2)SU1 to 9.1(2)SU2a, it show with this error message "There is not enough disk space in the common partition to perform the upgrade, for steps to resolve this condition please refer to CUCM 9.1(1) release notes or view defect CSCuc63312 in bug toolkit on Cisco.com". I had check the bug id and got 2 way to do it:-
1. reduce the amount of traces on the system, but I not ready want to do this
2. install a COP file name: ciscocm.free_common_space_v1.0.cop.sgn
If I select option 2, will it have any risk? Is it mean 9.1(2) - inactive version will be clear out from disk space or it will clear out 2 version - active and inactive version from disk space?
I need have some advice on this before I perform.
Thanks.

Hi,
As per the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91_chapter_011.html
You will not be able to switch to the previous version after the COP file is installed. For example, if you are upgrading from Cisco Unified Communications Manager 9.0(1) to Cisco Unified Communications Manager 9.1(1) and the previous version is Cisco Unified Communications Manager 8.6, the COP file clears the space by removing the 8.6 version data that resides in the common partition. So after you apply the COP file, you will not be able to switch to the 8.6 version."
Additionally, regarding the first option, if you do not want to reduce the tracing levels you can still delete some old traces using RTMT which gives you an option of deleting the traces from the server as well as transferring / downloading them to your pc simultaneously by checking the 'delete from server' option on last page of log file collection option.
HTH
Manish

I want to do a factory restore on my iphone 4s but I do not want to the iOS6. If I back up, can then restore backup and keep iOS5 since a factory restore will automatically upgrade me?

I want to do a factory restore on my iphone 4s but I do not want to the iOS6. If I back up, can then restore backup and keep iOS5 since a factory restore will automatically upgrade me?

Found the answer myself. Thanks for the help!

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

MAIN_SHDRUN/ACT_UPG ends during upgrade

During upgrade from CRM 6.0 to 7.0 EHP1 MAIN_SHDRUN/ACT_UPG phase ends.
In ACTUPG.ELG file I see:
******* LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CRT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519X"Table" "CRMST_QUERY_OPP_BTIL" could not be activated
1 ETP111 exit code
I read SAPACCI702.CRT:
3 DDT012XAktiviere Tabelle "CRMST_QUERY_OPP_BTIL"
3 DDT402 Append-Struktur "ZCRMST_QUERY_OPP_BTIL" an Tabelle "CRMST_QUERY_OPP_BTIL" angefügt
2WDDT191 Erweiterungskat. "3" möglich, aber Include oder Subtyp ist noch unklassif.
1EDDT963 Feld "PROD_HIERARCHY" in Tabelle "CRMST_QUERY_OPP_BTIL" ist doppelt (Bitte überprüfen)
3 DDT013 Tabelle "CRMST_QUERY_OPP_BTIL" wurde nicht aktiviert
3 DDT014XAktiviere abhängige Tabelle "CRMST_QUERY_OPP_BTIL"
3 DDT402 Append-Struktur "ZCRMST_QUERY_OPP_BTIL" an Tabelle "CRMST_QUERY_OPP_BTIL" angefügt
2WDDT191 Erweiterungskat. "3" möglich, aber Include oder Subtyp ist noch unklassif.
3 DDT038 Aktivierung abhängige Tabelle "CRMST_QUERY_OPP_BTIL" erfolgreich
Oh... in german language... it's a problem for me. How can I check this structure? how?
Have you got any suggest?
Regards.

Hi Ganimede,
i have the similar kind of error can you please explain the steps for deleting the entry you have specified...
would be greate if you coulkd reply earliest
Thanks and Regards
Amar Ghuge

How to track changes made to the standard objects by SAP during upgrade ?

Hi All,
Can any one of you please let me know if there is any straight forward method to find any change made to the standard objects by SAP in different versions ?
Like for eg, during upgrade from 4.6c to ECC 6.0.
Thanks in advance.

> For eg , if SAP has made any change in the standard transaction IE02, in ECC 6.0 how will we come to know those changes?
There are two sources for that:
The "Solution Browser" (http://solutionbrowser.erp.sap.fmpmedia.com/) which lists the differences between source and destination release and the release notes (http://service.sap.com/releasenotes). You'd need to read here all those from 4.6 to ERP 6.0 (so 4.7, ECC 5.0 and ERP 6.0) to find out the behaviour changes.
Markus

Can we activate Classic General Ledger in ECC6.0 during upgrade from 4.6C

Dear SAP Gurus,
Greetings
My Client's technical team had upgraded their system from 4.6C to ECC6.0 and they had activated classic GL instead of New GL. And they had also activated classic withholding tax in place of Extended Withholding tax.
They are facing some error during posting of transactions (like generation of excise invoices, posting of WHT transactions, etc.) I told that it can be a reason of not activating New GL.
Is my understanding correct...?? Can we activate classic GL during upgrade from 4.6C to ECC6.0...??
In case of a new client built (with ECC6.0), can we activate the classic GL instead of the New GL..??
Does the system will work correctly in the long run if they had activated classic GL and classic WHT...??
Please clarify. Thanks in advance for your time and efforts
Regards,
Chaps
P.S. Points will be awarded for answers !!

Hi,
I think that you should read long text of OSS note 999614 carfully and you are
aware of the fact that you will have additional migration efforts in
case you need to migrate to new G/L later on.
In case you are convinced that this is the best way please feel free
to deactivate new G/L as described in note 999614.
Please make sure that you deactivate new G/L in all clients of your
new system in case there were already client copies done.
Yes this is possible and I would not automatically assume that
error during posting of transactions are due to New GL not being activated.
Note 756146 documents the issue and possible repercussions
of using Classic GL.
In the case of a new installation the new G/L accounting
is active by default in ERP. In principle, the use
of the classic GL is also possible for new customers, however,
SAP does not recommend it since this requires an additional
migration expense in later years.
Regards,
Aidan

Behaviour of ztables during upgrade

Hi all
I am trying to rationalise our ztables and would like to change the Delivery Class of some of our tables from 'W' to 'C' so that data can be transported through our landscape rather than manually entered on each system.
I've read the SAP help on the Delivery Class and note that the behaviour during Upgrade differs between 'W' and 'C'...:
Client Dependant
Class A and C: Data is only imported into client 000. Existing data records are overwritten.
Class E, S and W: Data is imported into all clients. Existing data records are overwritten.
Client Independant
Classes A, L and C: No data is imported.
Classes E, S, and W: Data is imported. Existing data records with the same key are overwritten.
...but I don't really understand what it means in practice. Is anybody able to explain to me what data is being imported and what the relevance of Client 000 is in this particular instance?
Please don't just copy the SAP help as I have already read it!!!
Thanks
Andy

Hi Andrew,
I can tell you something from what I have observed.
When we give class A the changes need to be done by us in all systems individualy.
When Class C, it asks for a transport and we can have same value transported
In this context client 000 is nothing but the client which you are using.So this would mean with A and C data is only in that client where you are using it or updating it.
So for other client you need to either make data manually as in case of A or in case of C you need to import the Transport.
From this behaviour it seems that for Class E,S and W the data that is being created in one client get's copied to other clients too on that system so it is like a system wide change in the data.
Hope this helps in getting some idea.
Regards
Nishant

Errors in DDIC Activation phase during upgrade.

Hi,
Title: Errors in DDIC Activation phase during upgrade.
During preprocessing phase (phase ACT_UPG) we got many DDIC activation errors such as:
SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation.
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CPE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519 "Data Element" "/BI0/OICH_AT" could not be activated
1EEDO519 "Data Element" "/BI0/OICREA_TIME" could not be activated
1 ETP111 exit code : "8"
We have searched the SDN, many posts say that we have to just activate them. But my question is where - in source system OR in Shadow system?
We assumed it is Source system (please correct if it is wrong), unlocked the system and logged in as normal user and tried to activate the Data Element. Now, it says "Search Help /BI0/OICH_AT is not active or contains no parameter". How to go about it?
If it is Shadow System, how can i unlock the system?
Many thanks,
Mohan.

Dear Mohan,
There are search helps configured for the dataelements in ACTUPG.ELG. These search helps were created by mistake by the system.
The search helps can be deleted manually in the shadow instance.
In this case you should remove these fields in se11 (in your shadow instance) as the Search help shouldn't exist.
You should do this step for all data elements shown in the log ACTUPG.ELG:
For example: SE11 -> /BI0/OICH_AT -> Change -> Tab "Further characteristics"
1. Goto SE11:
2. Select Data type and fill "/BI0/OICH_AT" and display
3. Select the tab "Further Characteristics" and
4. Remove the values for fields "Name" and "Parameters"
 then click on icon "Activate"
Please do the same for the other object.
But before performing above steps you need to unlock the shadow instance by the following command:
SAPup unlockshd <SID>
(if using SAPup)
SAPehpi unlockshd <SID>
(if using SAPehpi)
Also do not forget to lock the shadow system again after performing the steps and continuing the upgrade by the following command:
SAPup lockshd <SID>
(if using SAPup)
SAPehpi lockshd <SID>
(if using SAPehpi)
You can logon to your shadow system with any different user than DDIC.
Best Regards,
Abhishek
Edited by: Abhishek Srivastava on Oct 17, 2011 6:26 PM

Role For Security Consultant During Upgradation

Dear Friends,
Here One Question.
During Upgradation from 4.6C to ECC 6.0
What Special Responsibility Comes To A Security Consultant.
Just Need Idea of Those Jobs.
Thank You.
Sumanta

Hi,
few info i got can share with you, hopefully you find it good source.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_jas/~form/handler
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f18c632a-0a01-0010-38b8-9ac82ea98a4e
http://help.sap.com/saphelp_nw04/helpdata/en/9d/d38c4024d26e1de10000000a1550b0/frameset.htm
THnaks,
AKL
<removed_by_moderator>
Edited by: Julius Bussche on Jul 25, 2008 12:08 PM

Restoring variants during upgrade

Similar Messages

Maybe you are looking for