Restoring when the Touch isn't recognized by iTunes?

I have a 1st Gen 8GB Touch with water damage. It powered on and worked a little (no wifi, no sound, poor battery life, but I could use apps) for a week or so. In that time, I restored the iPod a number of times, hoping to fix something. Always restored with my personal back-up, too.
Now it's not working at all. When it has power, it just flashes a white screen. I've tried forcing it into recovery mode, but that didn't work.
I accept that it's toasted and just want to sell it for parts so I can buy a sweet new 2nd Gen.
Is there anyway to remove the personal data (address book, email accounts) if iTunes won't acknowledge the device and it won't power on? Or is all the data gone if it's just flashing a white screen?
Thanks for any help!

If you have iTunes 11 and are using the same cable that works with the 2G iPod.
- Try on another computer
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar      

Similar Messages

  • My ipod touch isn't recognized in itunes, what can I do?

    my ipod touch isn't recognized in itunes, what can I do?

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • TS1538 My iPod Touch isn't recognized in itunes.

    My ipod touch isn't recognised in iTunes on the computer I always use to sync music onto it. (I can't see "Omar's iPod" in the left column.)
    When I plug it in and I open up iTunes, the device isn't shown.
    However, the device is shown in My Computer.
    When I plug it into other computers, iTunes recognises my device. (I can see "Omar's iPod" in the left column.)
    I've tried every method, except for Recovery Mode because I don't want to lose any of the files on my iPod.
    I've done every method in the Apple trouble shooting manuals.
    I need iTunes to recognise my device, help please.
    - Omar

    Try Here...
    iPhone, iPad, or iPod touch not appearing in iTunes

  • My ipod touch isn't recognized by itunes or windows after ios5 update

    I did the update for ios5 on windows, and the computer said the ipod reload wasn't complete, but the ipod said it was complete.  Now my ipod is not recognized by itunes or windows.  Any suggestions?  Thanks!

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My iPod touch isn't recognized in iTunes, can't sync

    when I try to sync my iPod with iTunes the Sync option is grayed out.  There is no Sync in the bottom of the screen.  I have stopped/started AMDS, uninstalled and reinstalled iTunes.  My computer recognizes the iPod but I just can't sync the new songs I just loaded into my library onto the iPod.  Help please!

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • My 3G iPod touch isn't recognized by iTunes.

    I've reset the iPod, completely uninstalled and reinstalled iTunes, and did the same with the driver software. ITunes recognizes my 2G iPod touch but not my 3G. The driver software installed itself as a digital camera software instead of where it should be. I've tried everything I've been able to find and it still won't show up. I went through all of the troubleshooting stuff too.

    If you have iTunes 11 and are using the same cable that works with the 2G iPod.
    - Try on another computer
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • What do i do when external optical drive doesn't show up in finder?  how can i import software, music, etc. when the drive isn't recognized/mounted/whatever?

    the internal optical drive on my early 2006 20"imac has mechanical problems ejecting discs.  i've gone thru all the recommended steps to eject discs, and have luckily been able to eject the last 3 discs but only after spending 30-60 minutes going thru all of the steps over and over, and today just trying "eject disc" in itunes since i had itunes open.  i don't want to put another disc in - the drive clearly has problems with the mechanical eject mechanism, and from what i've read that's not unique to my computer.
    i bought an external optical drive: lite on, clamshell design to avoid problems with the eject mechanism; i contacted the mfr who said it's mac compatible.
    the drive plays dvds, which is all i've tried so far, but doesn't show up in finder.  so i don't know how to use it to load software, or music, or anything besides watch dvds.
    is there something i can do to get the drive recognized/mounted/whatever?  i would prefer to not spend the $220 which was quoted to me by an authorized mac repair company, even tho i think that's probably a reasonable cost given the delicacy of the operation as shown on ifixit.com. 
    thanks!

    I have an external LaCie burner and it will not show up on my Mac unless I insert a CD or DVD - in that case, the media will show up (I have these settings in the Pref Pane):
    If you want to burn files or music to blank media, you can use Finder or Disk Utility for files, but should use an iTunes playlist/iTunes for music and a movie burn app for videos/movies (such as iDVD, Roxio Toast, Burn, etc).
    If you simply want to drag files over as a backup, an external hard drive is a much better solution than a burner.

  • IPod touch isn't recognized by iTunes

        My iPod Touch 4th gen is exactly a year old. Today I tried to plug it into iTunes but it was not recognized. Not only was the iPod not connecting to iTunes, but it was not charging either. It is not the computer, I have tried both of my macs. It is not the cord, I have tried two different cables which don't work. I have tried both cables on my old iPod nano and they work fine. In addition the cables work when charging the iPod touch through a wall charger. I'm thinking the problem here is the iPod...? Please help me out!!!

    - Try resetting the iPOd,
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Next try placing the iPod in recovery mode nd then restore vi iTunes.  Noe that if iTunes does not see the iPod the iPod will not work. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • My Ipod Touch isn't recognized by Itunes or Windows. (using Vista) I have tried Apple's reinstall, it didn't work.

    I have tried Apple's reinstall, it didn't work. There aren't any other devices in any USB port. Using the same USB connectorcable and port, my computer and iTunes will recognize my friends exact same model of iPod touch (4 gen). Any help? It is a new iPod, never before connected to any computer.

    Yu can try placing the iPod in Recovery mode and then try restoring via iTunes. The problem is that if you can't restore your iPod may be bricked
    Next would be to try DFU mode. this may also brick your iPod if it can't be restored.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Make an appointment at the Genius Bar of an Apple store.

  • My iPod touch isn't recognized by iTunes, but it is recognized by Windows.

    I'm using Windows 8 and it worked okay for a while. I have uninstalled and re-installed iTunes without success.  It works fine on my other computer (desktop Windows 7). Thanks for any suggestions
    Jim McColl

    Thanks for quick response. After I did the post I kept looking and stumbled upon the site you refer to. I tried a variety of things such as stoping and starting AMDS, re-installing iTunes etc. etc. Finally what I did was remove every vestige of  Apple software, restarting the computer and re-installing iTunes. I was very pleased with the result as not only does it now see my iPod but my library is totally intact including playlists, so no re-building required.
    The link that species these procedures is below.
    http://support.apple.com/kb/HT1925?viewlocale=en_US
    Regards
    Jim McColl

  • I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?

    I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?

    Try disabling your security software and turning off the Firewall on your PC.
    Disable antivirus software
    Turn Windows Firewall on or off
    iOS: Device not recognized in iTunes for Windows  <--- definitely try the instructions for resetting the AMDS.

  • Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

    Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • IPod asks to be restored in iTunes, but isn't recognized in iTunes...

    My iPod classic 160GB isn't recognized by iTunes anymore. I started it in disk mode and reset it, but now the message appears that I need to restore my iPod in iTunes. But iTunes doesn't recognize it when I connect it to my laptop and on the display "do not disconnect" appears. Now what do I do? I'm quite desperate and hope someone can help.
    Thanks in advance...

    I have noticed that this happened to user Colin Craig and nobody managed to answer him, is there anyone that can help??
    for more detail, i only changed the name as it appeared in itunes in capital letters then when i looked in my pod it was empty! HELP MEEEEEEEEEEE!!

  • Ipod touch isn't recognized on my machine but is on my other pc   :o(

    I have been unable to get my Windows XP service pack 3 machine to recognize my ipod touch since 12/24. Prior to that I've successfully linked and synced since May. I've tried all the solutions mentioned on the Apple site several times including unistalling and reinstalling itunes, trying all my different USB 2.0 ports, powering ipod and pc down and back up again, resetting my ipod and so on. I've unplugged all other usb devices and tried it. I also have a firewire port and it doesn't work there either. (It had previously) I've stopped and started my Apple Mobile Device services and watched as the Apple Mobile Device USB driver activates as soon as I plug my ipod into a USB port. What happens then is that Windows reports that "An iPod has been detected but it could not be identified properly. Please disconnect and reconnect the iPod, then try again." A dozen times later it's still saying the same thing. (For a time Windows thought it was a camera, but somewhere I found how to turn that off.)
    What's wierd is that my old ipod and itunes get along fine when I plug that one into the same USB port on my PC. iTunes identifies the old iPod and it syncs perfectly.
    Also wierd is if I connect my new ipod touch to my wife's PC, itunes and the ipod touch sync successfully as well.
    I've gone so far to reinstall Windows to a version in October, back when my ipod touch was working perfectly but still no luck.
    I don't know the fix but as far as I can tell my Windows XP machine is unable to identify the ipod touch but it has no problem identifying my older ipod.
    Does anyone have anything they could suggest? I'm going through ipod withdrawl!

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If the iOS is 4.1 or greater you need iTunes 10 and that requires OSX 10.5.8 or later

  • I a, trying to download espn app. The app is saying I need iOS 7. My iOS is 7.1 however the app isn't recognizing that what can I do

    I a, trying to download espn app. The app is saying I need iOS 7. My iOS is 7.1 however the app isn't recognizing that what can I do

    I live in the USA and I had the app working on my Iphone however the app is not working when I try to downloaded on my Ipad.

Maybe you are looking for

  • How do i find out the DPI of a photo ?

    i want to enter a photo in a 'contest'  ... the rule is that the photo has to be at least 300 DPI .... how do i determine what DPI my photo is ? i have iPhoto 9.2.3 thank you Donna

  • Best practices to reduce downtime for Database releases(rolling changes)

    Hi, What are best practices to reduce downtime for database releases on 10.2.0.3? What DB changes can be rolling and what can't? Thanks in advance. Regards, RJiv.

  • Unload data to multiple text files

    Hello! I need to unload data from oracle table into txt files (fields must have fixed length). I wrote process in apex below and I have problem, because this code make one file and in that file there are listed information separated by id. But i need

  • Web Part For Video Gallery

    Hi, My Coding Friends i have a requirement of playing videos from a list/libray of Sharepoint 2013.I have to play all the video formats and the maximum size to be played should be 40mb.Could you please help me on it.Its an Urgent Requirement and need

  • Can anyone send/post me the code for RTP server which reads soundcard

    hi all, can anyone send me the code for RTP server which reads soundcard and RTP client to tranmit the sound.