Restoring without the computer

Been having some serious problems with my two day old ipod. i am sure a complete restore would completely reverse the trend. every time i run updater it thinks for a minute then turns to the typical blue pc window as opposed to its silver mac counterpart and stops responding. when this happens the updater screen also goes blank. i get the folder and ! icon on my ipod now and have tried to restore it in disk mode as well as in regular mode. neither gives me any success. please help!

Sounds like it can't find a valid system and can't write a new one.
I suggest you take it back to the shop.

Similar Messages

  • HT1212 When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    No. You need a computer with iTunes and an internet connection.
    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1212 I've forgotten my ipad passcode but when I try to restore on the computer it won't let me as I have to turn "find your ipad" off but i don't know how when I can't use the  ipad itself. How do I do this on the cloud?

    I've forgotten my ipad passcode but when I try to restore on the computer it won't let me as I have to turn "find your ipad" off but i don't know how when I can't use the  ipad itself. How do I do this on the cloud?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • 2nd gen Apple TV frozen on date setting so I am trying to restore on the computer.

    2nd gen Apple TV frozen on date setting so I am trying to restore on the computer. I have it plugged in but nothing is coming up in itunes. What am I missing?

    Hello Randlebo,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Apple TV: Unable to restore using iTunes
    http://support.apple.com/kb/TS5231
    Have a nice day,
    Mario

  • HT201250 When I have completed the restore process , the computer asks me to restart , I have done this but it just cycles around for 15 minutes and asks me to restart again . What's the next step after this ?

    When I have completed the restore process , the computer asks me to restart the computer. When I do there it cycles for 15 minutes and then asks me to restart again. What should I do next ?

    See #E8 in Time Machine - Troubleshooting.
    Also . . . an update was released the other day, to fix some sort of restore problem (we don't know just what).  Run Software Update or download it from here:  http://support.apple.com/kb/DL1505

  • Connect to iTunes my disable iPhone to restore but the computer cannot detect my device due to network settings pls helpw

    mu iPhone was disabled I  followed the instruction   On how to restore but the computer cannot detect my device due to network settings problem . is there anybody can Help .

    iOS: Device not recognized in iTunes for Windows

  • HT1420 how to deauthorize without the computer?

    A laptop has cannot be saved, booted up or turned on.  It is one of our 5 authorized computers.  We need to authorize a new laptop. How can we deauthorize a computer without the computer we intend to deauthorize?

    By using the Deauthorize All function.
    (68839)

  • I put my iphone to restore but the computer turned off and jammed it, what should I do to put it working?

    I put my iphone to restore but the computer turned off and jammed it, what should I do to put it working?

    Hi jonnym2132,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    If you are unable to update or restore your iPhone, follow these troubleshooting steps:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Judy

  • IPhone 4 won't download latest version of itunes or the OS or safari, and it won't let me restore without the latest version of itunes. Can you say circle??

    Help!
    I synced my iPhone 4, but it keeps getting the red exclamation points and an error message when I try to download the latest software. And, it won't let me restore the phone without the latest software. I'm stuck.
    Then, this morning, the phone locked up completely. I got it to turn off finally, by holding down the power button and home button at the same time for more than 10 seconds. But still no luck with the software download.
    It's Thanksgiving, and can't go to Apple.
    My phone is my only telephone (no home phone), and I use it to keep track of two email addresses (personal and work). So I'm anxious to have it fully operational.
    Suggestions? Thanks!!!

    one can't update itunes or safari seperate on the iphone those 2 are a part of the ios update
    you need to update your computer and then update your phone
    or if you have ios5 I guess you can update from settings

  • How can i get into the phone without the computer or passcode?

    A friend of mine gave me an old iphone to use as a replacement for mine and she no longer has the computer for the itunes which it was synced, nor does she remember the passcode.

    As Allan says, it's not possible.  Frankly, that makes me feel a whole lot more secure.  I would not want to think that if my iPhone were misplaced that someone could get into it without either the computer or passcode.

  • I have a mac osx and want to use a magic jack without the computer on all the time.

    I am trying to use a magic jack plus without plugging into my mac.  (It will work plugged directly into the computer but I bought it so I would not have to keep my mac on all the time to use the phone).
    What do I need to get a separate modem.  I am on air port express (an old one)

    It appears that Magic Jack installs software on your system that it needs to run. Look at some of the threads in "More Like This" on the righthand side of this page or look here:
    http://www.voipreview.org/review/magicjack

  • Ato restore my iPhone it turns off on me. I try to reboot it and it does the same hing. When I click on restore on the computer, the phone turns off in he middle of the file extraction. What do I do now?

    I cant seem to restore my iPhone it. I try to reboot it and it goes to a connect to iTunes screen. I connect the phone to the computer and when I click restore in iTunes, the phone turns off in he middle of the file extraction. What do I do now?

    Restore as a NEW device.  Don't use backup at all.  Your backup may have corrupt data causing the issue.

  • Restoring without the AC adapter?

    Well, Vista corrupted my 4G Photo iPod when I unwisely decided to split it with Ubuntu. I lost about 12GB of music, but I've managed to get most of it back.
    But now, I have to restore the iPod in order to put these new songs on there. I did so today, and now I have a bit of a problem. I lent my adapter to a friend who subsequently had it stolen from him in Cancun. Because I need to plug it in to the AC adapter in order to finish the process, I'm pretty much left hanging. I'd rather not go out and buy the adapter, as it is quite expensive. Is there no way to complete the process without the adapter? I have no other USB devices that perform a similar function.
    Thanks,
    Hemlock

    Try inserting the USB plug only part way into the USB port. The +5V and Ground lines are a bit longer than the data lines, so when you plug them in, they make contact first. If you only plug it in part way to connect just those two lines, you can sometimes fool the iPod into thinking it is on a charger.
    Patrick

  • HT201210 Problem : -1 ....when connected to itunes and trying to update restore phone the computer is telling me that "ERROR -1" phone then goes to a itunes symbol and a usb connector.

    Irecently purchased another iphone  as my previous one was taken for a drive on a car roof and obviousley got off at the wrong stop..
    I always dredded loosing it as they hold toooo much info ...doh
    when doing a i0s 6 update off the new (second hand phone which was working perfectly ) shows -1 error
    - is it possibly because it neds a systyem restore off its original computer that it was set up on..?
    - it now just shows the itunes symbol and i cant even get into the iphone....
    it wont do a restore or connect to itunes..........Help needed by iphone nerd/pro

    You have no choice but to restore the phone.
    However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right?

  • How clean does a Factory Restore get the computer?

    Hi there. I searched through the posts on the forum and learned some information, but have not seen a specific answer to my question.
    My computer is a Z60m with XP Pro.
    I caught a bad virus masquerading as an anti-virus. It was terribly obvious it was bad news and I switched my internet off almost immediately. My desktop had changed to a wallpaper stating "Warning: your're in danger!' and a fake antivirus tried to run every 30 seconds.I believe it was "System Security 2009."
    I tried antivirus programs and nothing would run; I could not even boot to safe mode. It gave me a blue screen instead. I deicded the best course of action  was to start over and used the ThinkVantage button to "restore factory settings."
    It worked, I have new Windows XP. Updated to servicepack 2 and 3, downloaded a few antivirus programs and scanned. They all show a clean computer. I had one remnant of the "System Security 2009" virus Malwarebytes found in safe mode and fixed it.
    My question is: is there any way the virus survived? Could it infect the hidden area the R&R is kept? If so, how do I find out? I am really paranoid to use any passwords until I am 100% sure I killed this thing.
    Thank you for your time!

    If you recover to factory condition, this should reformat the discs and reinstall all the drivers and windows, it will rewipe the hdd. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for

  • R12.0.6 OA PG xml - Error in - MDS or File System - No data found on region

    Hello, Instance details: I am in release 12.0.6, Am using "p7523554_R12_GENERIC" patch for building my OA page Business components version : 10.1.3.3 Issue: (when i run my OA page from my desktop, it works, but upon migrating the code to unix, I get

  • Hp photosmart printer

    I have a HP photosmart d110 printer... I have put in a new black ink cartridge but have not changed the color and it is empty... will that cause it to not print at all?

  • How to run component

    Hi     I am new to Enterprise Portal. I used to work with EP5 using “jakarta-tomcat-3.3.1a” using PDK plugins I am using eclipse I used to develop small components.  I used to develop the portal application using eclipse in the following way     File

  • X-Fi midi effects

    I just bought an X-Fi and I've found that it doesn't seem to respond to cc91 and cc93 (reverb and chorus levels) like all my previous Sound Blaster cards have (these controllers have almost no effect). Setting reverb and chorus levels with the X-Fi i

  • Travel Management - Food Expense Type Limit Per Day

    Hi We are implementing Travel Management. Requirement is - We have to set the limit for Food expense type / Per Day up to  1000 Rs. How can we do this in configuration ?? I have searched all the nodes but No where i could found to set the limit on Pe