Restrict a field (0 to 100) in SM30

Hi,
       I have created a Z table and in that there is field with domain of type DEC (Length 5, decimals 2, output length 6). In this domain on value range tab, under intevals I have given lower limit as 0 and upper limit as 100.
      I have also generated table maintainance for the same and when I am trying to enter values using SM30, for the domain which I have mentioned its accpting a value other than 0 to 100.
      What could be the problem?

Hi,
I checked up the same after you said that it does not work, however it works fine as indicated in the solution/reply. Infact I checked directly on the system & it works fine as suggested.
Perhaps you can recheck your creation steps.
Best Regards, Murugesh

Similar Messages

  • Restrict metadata field during an update to a specific user group

    Hello everyone,
    I am having some trouble figuring out the best way to restrict permissions to change some metadata fields for 2 different groups of users.
    I have two user groups, A and B. Group A will be checking in documents that the B group will then review for accuracy and quality. Group B will then update an optionlist field called "Status" with either "Recommended" or "Not Recommended".
    This is not a workflow situation as the scope requires that all documents are immediately available for searching. I currently have a CheckIn and Search profile for the content permitting read write access to groups A and B. The "Status" field is hidden on the CheckIn page. Can anyone please suggest a good way to restrict the field "Status" on an Update page to just "B" users? Groups A and B should be able to update all fields with the exception of the B restricted "Status" field.
    Thanks!
    Edited by: user6750815 on Jun 2, 2010 4:11 PM

    Hey rMac,
    I understand it this way you have one profile for A and B user groups. On this profile Status field is hidden.
    If this is your problem you can approach it from two places, while making the rule for hiding the Status field, use rule activation condition. Make it active only for users with Role A . This way even with single profile some of the user with Role B will be able to see the Status field.
    otherwise you can put similar code in Restrict Personalization Link where in you make this hidden field editable and compulsory for Users in B.
    cheers,
    sapan

  • Doubt in restricting table field value

    Hi,
    I Want to restrict one field in my table to have only predefined values. ie, I have a field named Status which can have only 2 values either 'Present' or 'Absent'. How to make this constraint enforced in the table ?
    Suggestions & ideas are very much appreciated,
    Thanks & regards,
    Ram

    Hi ,,
    Using Check Constraint it can be done.
    Else
    Write a trigger : before insert
    Cheers
    Nirmal

  • How to restrict the fields in a std screen i.e addtional data b of va01

    how to restrict the fields in a std screen i.e addtional data b of va01
    certain document type
    as i already added some fields in it
    can u help me with the setp
    With regards
    rohan Shetty

    Hi Rohan,
    Can you please let us know the solution that you had, i have similar requirement?
    Thanks,
    Manohar.

  • Restrict date field in vf01 to system date .

    hi gurus,
    my requirement is to restrict date field in vf01 to system date .
    i have changed the 011 routine in vtfa .
    do I need any extra effort
    debajyoti

    Hi debajyothi
    First of all which date field you want to restrict to systems date can you be more specific debajyothi
    But In VOV8 , there is a pricing  date field  , if you customize it as per your requirement , like if you keep it blank then it will be systems date , or billing date , delivery date etc this can be one input if it is related to pricing
    Even as you said in copy controls if you change the sub- routine then it will work
    Regards
    Srinath

  • RESTRICTING XBLNR_LONG FIELD OF FIDCC1IDOC IN ECC6

    Hi All,
    The segemets E2FIKPF006 has been added to FIDCC1 idoc as part of ECC6.0.This segment contains the field XBLNR_LONG.
    Could someone let me know how to restrict this field as we dont want to populate this field and send and the idoc.

    Hi
    Looks like BASIS issue.
    Pls check the OSS Note - Note 787418 - Sent documents are not readable after upgrade
    Pls contact your BASIS person
    Regards
    MD

  • Can any one know how do restrict that fields in mm

    hi gurus
    can any one know how do we restrict the fields in the material master.  Where do we control  do any one know the transaction code for that.
    Thanks in advance

    OMSR
    and
    OMS9
    Help for OMSR
    Assign Fields to Field Selection Groups
    To define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance, you must assign the field to a field selection group. You may assign a field to one field selection group only.
    Before including customer-defined fields in a field selection group together with standard fields, or assigning standard fields to a different field selection group, familiarize yourself with the assignment of fields to field selection groups in the standard R/3 System.
    Standard settings
    The values of the field selection groups have been preassigned as follows:
    001-110 Material master for industry
    111-120 Reserved for customers (except where the values are already in use)
    121-150 Material master for industry
    151-210 Material master for retail
    211-240 Reserved for customers
    Recommendation
    If possible, use the setting in the standard R/3 System. No further action is then required. If you want to make individual fields inaccessible, the easiest way is to group them together in a single field selection group and to set it to Display or Hide.
    Activities
    1. Check the setting in the standard R/3 System.
    For this, you need to know the data screen on which the relevant field appears in the material master, and the name of the screen field, for example, MARA-MEINS in the case of the base unit of measure.
    2. If necessary, change the assignment of fields to field selection groups as required.
    Further notes
    In the case of long texts, you define whether the entire screen is hidden or displayed, or whether entries are mandatory or optional. For this reason, each screen has been assigned to one of the following dummy fields:
    LTEXT_BEST Purchase order text
    LTEXT_GRUN Basic data text
    LTEXT_IVER Internal comment
    LTEXT_PRUE Inspection text
    LTEXT_VERT Sales text
    help for OMS9
    Maintain Field Selection for Data Screens
    In this IMG activity, you create and maintain field references. You can see where a field reference is used by choosing Where-used list.
    Activities
    Define or change the field references as required (except for field references with the prefix SAP which must not be changed). New field references must begin with Y or Z.
    Changing the Field Selection Options for a Field Selection Group
    1. Specify the field selection group.
    2. Select the field selection option (hide, display, required entry, or optional entry) for each field reference as required.
    3. Save your data.
    Creating a Field Reference
    1. Choose New entries.
    2. Specify a field reference beginning with Y or Z.
    3. Select the field selection option for each field selection group as required.
    4. Save your data.
    Changing a Field Reference
    1. Double-click the relevant field reference.
    2. Change the field selection option for each field selection group as required.
    3. Save your data.
    reward if usefull
    Message was edited by:
            Umakant Bhangale

  • How i can restrict one field up to 3 MB in size

    Hi   Friends-
    Basically i have to restrict one field to  3 mb  size .
    Detail of my req :
    In tcode  SE19  if you give classic badi impl  name as  HRRCF_DOC_UPLOAD     and  display  you will find a class   CL_IM_HRRCF_DOC_UPLOAD   just double click and then  select  the second method  CHECK_ATTACH_FILE_SIZE  and up side click on parameters  here one parameter is there called  CONTENT    type is  string   and  i have to ristrict it to  3 MB  how  i can do it ? 
    Pls  guide me for the same .
    Regards
    Meeta

    You can purchase an upgrade, but the only options available as a qualifying previous product are CS5 and CS5 Extended and Acrobat X Suite.  It isn't entirely clear if CS5 also includes CS5.1 or not, so I'd suggest using the Chat Now button over at the side to clarify.
    To get to this listing, you can go to www.adobe.com then click Search and type in Photoshop CS6 then click the Buy button next to Photoshop CS6 in the results Creative Suite 6 then edit your cart to make it an upgrade:
    You can also choose the Extended version of PS CS6 which is more money and can additionally do things with video and sequences of images and maybe 3D, although I'm not exactly sure at this point since I already have PS-CS6 Extended as part of my CC Photography Plan PS-CC+LR for $10/month.

  • Restrict the field selection

    Hi,
    i would like to restrict the field selection upto 20 from left to right pane in the field choice popup.
    when the user cliks on the push button in selction screen, pop up will come for field selection for sorting order. now user will have a facility to move the fields from left box to right box, where we have to restrict only 20. if it exceeds, need to pass a message.
    Could some one help on this.
    Regards
    KER

    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-3

  • Is it possible to restrict changing records in customizing table in SM30?

    Hi.
    Is it somehow possible to set authorizations in a way, that a user could change only certain entries in a customizing table using SM30? What I want to achieve with this - we have an internationally used system, where consultants from different countries are working often on the same customizing tables and we would like to restrict tham to be able to change records only relevant for those countries, so they cannot change the records for other countries by mistake / on purpose. The records are usually identified by a certain "grouping" field (for instance MOLGA in table T511K or MOABW in T554S).
    So far I couldn't find anything apart from the S_TABU_DIS object, which is too rough for this requirement.
    Or maybe is there another way to achieve security in such a scenario?
    Thanks in advance for any ideas.

    Hi dusan,
    1. If u are talking about SM30 for standard table,
       then i don't think there is any such standard feature / facility,
       for restricting.
    2. If its our own Z Table, then we can go for events in table maintenance
      and write our code for same.
    3. But if such restrictions/validations are required,
       then its better to have a module pool for such thing.
      SM30 is for very simple and basic table maintenance.
    regards,
    amit m.

  • All fields are not displayed in SM30

    Dear All,
    I have created one Z-Table with 5 fields. For that Z-Table I have maintained table maintenance generator. Now in SM30 I am able to see only 3 fields, I have checked all the options but I am not able to find out what is the problem that 2 fields are not getting displayed.
    Please tell me what might be the issue?
    warm regards,
    nishu

    HI,
    While generating the TM there is oneoption which can disable some fields in sm30.
    I think they may be the reason in your case.
    regards,

  • Restricting BD10 field Logical Systems

    Is there an authorization object that can restrict field 'Logical Systems' (LOGSYS) in transaction code BD10?  If not, has anyone implemented an alternative solution?

    nope, there isn't.
    may i ask why you are granting this transaction? would it not be more efficient and less a risk to distribute materials using change-pointers and put the whole thing to batch?

  • How to create F1 help for fields of a table in SM30

    I have a z-table which is being maintained using SM30. while creating new entries for the z-table using this SM30 i want to create F1 help which will be useful for the user to create new entries. can anyone pls help we this requirement?

    Hi Lalitha,
    To have F1 help documentation, you need to create Documentation by pressing Documentation button in the Change Data Element screen (SE11)
    If you need certain values for the field through F4 help then you need to specify the values in the Domain of this Data element (SE11)
    Jogeswara Rao K

  • Restriction  of Field Change in VL02N change(After PGI)

    Hi Gurus
    In outbound delivery we are using the following fields:-
    1.     Means of Tr id:- LIKP-TRATY
    2.     Means of Tr. Type:- LIKP-TRAID
    3.     Shipping Conditions:- LIKP-VSART
    4.     Special Procedure Indicator:- LIKP-SDABW
    The same fields are being used in pricing conditions.
    However, even after PGI is done the fields can be amended in delivery using VL02N. The system does not turns the fields grey even after PGI and fields are still amendable.
    How to restrict the change.
    Thanks.

    Hi,
    You can implement Badi LE_SHP_DELIVERY_PROC with following code in method CHANGE_FIELD_ATTRIBUTES
      data: ls_attrib  type  SHP_SCREEN_ATTRIBUTES.
      ls_attrib-NAME = 'LIKP-TRAID'.
      ls_attrib-INPUT = 0.
      append ls_attrib to CT_FIELD_ATTRIBUTES.
      ls_attrib-NAME = 'LIKP-TRATY'.
      ls_attrib-INPUT = 0.
      append ls_attrib to CT_FIELD_ATTRIBUTES.
      ls_attrib-NAME = 'LIKP-VSART'.
      ls_attrib-INPUT = 0.
      append ls_attrib to CT_FIELD_ATTRIBUTES.
      ls_attrib-NAME = 'LIKP-SDABW'.
      ls_attrib-INPUT = 0.
      append ls_attrib to CT_FIELD_ATTRIBUTES.

  • Adding a field for a view on SM30

    We would like to add a field to a standard table and use it as maintanable via SM30.
    This standard table gets gets is data entries usually when  4-5 views are maintained through IMG customization/SM30. We would like to add one more fields on any of those 4-5 views such that the data maintained using SM30 gets saved in this table.
    We have used the append structure to add the custom field in the standard table. Not quite sure how it be brought on the views on SM30 ?
    Any inputs ?

    hi,
       There is a concept called append structures, where in these serve as and enhancement to the current sructure
    Modification is not recommended as it creates lots of problem in case of upgrades
    you can use the Append structure tab in the application tool bar of SM30
    regards,
    shiva

Maybe you are looking for