Restrict certain Storage location from getting displayed in CO06 !!

Dear all -
We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
in CO06.
I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
Thanks
Arun
Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

Similar Messages

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Storage location not getting copied in process order for components

Dear PP Gurus,
While making a production /process order the storage location of component materials is not getting copied from material master into the process order, it is showing any default storage location.
What couls be the reason for it..
For all components it is defaulting the same storage location.
Please throw some light on the issue what could be the reasoon for it..

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

I want to exclude a storage location from MRP

I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
Also repair storage location stock should not be calculated against 'stocks' term in MD04.
How to do this ? Pls share.

Hi,
In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
Please let me know if you have any questions.
Regards,
Senthilkumar

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Replicating storage locations from SAP SRM

Dear Experts,
How to replicate the storage locations from ECC to SAP SRM? How you can restrict the selection of storage location in SAP SRM based on the plant selection? i.e. plant 1000 has three storage locations say 1001, 1002, 1003. Now, when the user selects the plant 1000 as delivery address in direct procurement scenario, then the system should allow only the three values in value help?
Thanks and regards,
Ranjan

HI Ranjan,
Did you try by removing 'Storage Locations" from Extended Attributes in PPOMA_BBP?
thanks,
Rahul Mandale

Exclude storage location from Availability check

Hi,
We have to exclude 4 storage location out of 46 storage locations from availability check in sales order processing.
Please advice how to do it.
We can not use MRP area and MRP Groups to control this because of certain reasons.
Regards,
Avnish

Please check this..
spro...material management....consumption based planneng....planning...define storage location MRP...
Here give plant name and enter...
Against every storage location you ll have indicators for excluding,including the stock....
hope this clarifies..
For material availablity check in production order,
1. you need to delete the storage loation in OX09 (it is possible If no stock)
2. Or you need to transfer post the materials to a storage location xxxx which you can name as Blocked storage location...
F Y I....In OVZ9 you can exclude all the storage locations which is not your reequirement..
katrthick
Edited by: karthick PP on Mar 26, 2009 12:40 PM

Storage location not getting determine in Sales order

Hello All,
Storage location not getting determined in SO, every time when i update picking i have to manually enter the storage location.
I saw few of the response in the SCN but one thing i noticed in my system was, when i enter OVLQ i don't see OR order type, and for order type BV which is present in system assigned to MALA but still when i am creating CS order still storage location is getting determined.
Please help me to resolve this issue.
Regards,
Vishwanath.

Hi Vishwanath,
OVLQ is Delivery type and storage location determination and not for sales order type as you assumed
As per standard for BV cash sales order type subsequent Delivery Type is BV and hence you can see the value MALA against BV
Just check for LF delivery type there would be storage location determination assignment
Storage location is determined at Delivery level and not at order level
thanks
santosh

ATP check in certain storage location based on item category

hi gurus,
i need to know whether any one can help me. i need to know how to set the availability check in certain storage location by each item category. such as :
mat A item category TAN, ATP check only include in SLOC 01,02,03
but mat A with item category TANN, ATP check only include SLoc 04.
case:
in MMBE:
mat A
plant 1000 pc
     sloc 01 - 400 pc
     sloc 02 - 200 pc
     sloc 03 - 300 pc
     sloc 04 - 100 pc
so when create SO:
1. mat A itCat TAN qty 1000pc
   (Sistem will say that the stock not enough, bcoz stock in Sloc 01,02,03 only 900pc)
2. mat A itCat TANN qty 200pc
(Sistem will say that the stock not enough, bcoz stock in Sloc 04 only 100pc)
actually i prefer to use the standard solution but i think that must be use user exit, if so, do u know which user exit i shuld used, if not maybe u have a standard solution,.
thank you so much..
regards,
cindy
Edited by: cindy himawan on Feb 22, 2008 6:17 AM

Hi
As per my knowledge there is standard solution available for your requirement.. you may need to do some customisation using Z tables..
Muthupandiyan

Storage location from Shopping Cart is overwritten in PO

Hi
I am trying to convert a Shopping Cart to Purchase order using the sourcing application. However while doing that my Shopping Cart Storage location always gets overwritten by one particular Storage Location in PO. Even if i try and change the storage location to the correct one in PO, it again gets overwritten. This is causing problem during the Goods Receipt.
I am using the SRM 5.0 version and recently the system got upgraded to Support Pack 9.
Any help in this regard would be highly appreciated.
regards
manoj

Hi Manoj,
Please go through the following observations based on the information you have provided :
1. Check the Extended Attributes tab for the user whether the concerned plant and storage location were maintained or not.
2. Check whether that particular storage location is maintained for the concerned plant or not.
3. Check for the same using different user and different plant storage location combination.
Its difficult to say exactly what is the problem but for me it looks to be the storage location is not maintained for a particular plant thats why its taking the default storage location (generally the first one in alphabetical order)
Please revert after checking the above observations for further help.
Reward points for suitable answers.
Rgds,
Teja

Deactivation of storage locations from MRP run

Hi gurus,
How can i deactivate a particular storage location from MRP in a particular plant.
Regards
Kaisar

Hello,
There are 2 ways of doing that.
1. With the Transaction OMIR and selecting th indicator 1 Storage location stock excluded from MRP
This storage location will be excluded from MRP.
2. For a Specific Material(s), if you want the Storage location to be excluded from MRP:
You need to select the storage locatio MRP indicator as 1 in MRP4View of the Material.
Some concerns:
Your Materials are extended to the St.location say xxxx.
Now if you want this storage location to be excluded from the MRP.
By simply seeting the Customization settings will not work.
You need to manually select the MRP4 view and change the St.Loc MRP Indicator to 1.
The Materials created after this customization setting will adopt this settings automatically.
Hope this helps..
Regards,
Siva

Need to exclude storage location from MRP.

Hi Gurus,
Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
Now, the problem is every time i need to go to the material master of every material i have to excude from MRP, which is very time consuming..!
Please advise me is there any option in point of view of Storage Location, just simply define the storage location to be excluded from MRP run.
Thanks in advance.
Naveen.

Dear,
Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
Also check this link for more details,
Exclude purchase order on storage location from MRP
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 25, 2009 12:22 PM

Default Storage location from the Material master

Can we default the storage location from the material master into the reservation line item in trasaction MB21?

enter the production storage location in material master MRP2 view.
Edited by: Jürgen L. on May 7, 2008 6:52 PM

Default Storage location from PO to GR

Dear All,
How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
regards,
qsm sap

Hi,
First Storage location should be extended in Material master.
Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
One other option is In IMG settings if you set the checkbox set storage location automatically.
Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
No matter if you extended in material master/PR/PO
rgds
Chidanand

Table for storage location from MIGO in the index "where"

Hi,
I would like to know the in which table is saved the storage location.
I would like to take the storage location from MIGO in the tab index Where.
Thanks.
Dede

Hi Glen,
If I got it right... You want table MSEG for movement (table T001L for Sto. Location master - tcode OX09).
Cheers.

Restrict certain Storage location from getting displayed in CO06 !!

Similar Messages

Maybe you are looking for