Restrict copy access on a MFP M475dw

I want to restrict access to the copy function on my HP MFP M475dw.  I share office space and do not want other people to be able to use my equipment.
Is there some app or software I can download that would help me to do that.
I looked through the manual but the security function doesn't allow me to do that.
Thank you in advance!

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Cannot connect to HP ePRINT Web site with LaserJet Pro 400 colour MFP M475dw

    LaserJet Pro 400 color MFP m475dw- Just installed. Scan, print ,copy ,fax all working fine! using WiFi 
    Using IMAC  OS 10.8.2 with all updates
    Using Netgear router  DGN2200v3
    Printer will not connect to HP  ePrint Website
    Printer connects to the Hp Support and Profile for fax set up etc.  But the  "HP Web Services"  Section when entered and hit the Enable Button-- It does not connect to the site --- it just seems to just refresh.
    if i try to connect thro the printer not the imac  and try enable web services it says" Connecting " on the screen BUT after a few minutes of trying --------  then says " CONNECTION ERROR-- the printer is unable to connect to the service. Check the internet connection 
    ANY IDEAS-- AM I MISSING SOMETHING ???
    MANY THANKS
    This question was solved.
    View Solution.

    I would try pulling up the embedded web server (EWS) by entering the IP address for the printer in to a browser and set a static IP address & DNS. 
    The information for the default gateway, subnet mask and that IP address can be accessed from the Setup menu on the front panel,  go to Setup>> Reports>> Network summary  and that will print it off.
    Once you have entered the IP in to a Browser and have the EWS pulled up, navigate to the tab at the top labeled “Networking”. Then click on IPv4 in the left column; that will bring up the Address configuration page.  Set the radio button to manual and fill out the IP address, Default gateway and Subnet mask with the information from the report. Do not worry about filling out the portion titled WINS server, that can be left alone.
    You will then want to fill out the DNS portion of the page, The Preferred should be set to 8.8.8.8 and the alternative/secondary should be set to 8.8.4.4. Then click “apply”
    Power cycle the printer. Turn it off, wait 30 seconds and then turn it back on. Once it is completely up and running reattempt to connect to web services. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Laserjet Pro 400 color MFP M475dw print in black and white

    Hello,
    I have a Laserjet Pro 400 color MFP M475dw printer that is contected to a network so that multiple users can print from it. I want to be able to restrict it so that they can only print in black and white and double sided. Is this possible? and if so could you please tell me how?
    I am not able to restrict them on a print by print basis, hence I am looking for a solution where I only have to make the change once.
    Thanks for your help!

    I understand you want to change a setting one time so that no matter who is sending the printer a print job it prints in gray scale.  Actually I found two ways to do it.  Here is the basic way to do it as described on page 16 of the User Guide.  Also, you could set up this printer to receive emails (ePrint) in gray scale only.  I just did a test after making changes in my ePrint settings at www.eprintcenter.com and no color was printed on a regular document containing color.  I hope that answers your question.  If not, let me know. I will be happy to explain greater detail.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Hoping for repsonse from HP, re: Laserjet 400 Color MFP M475dw can not locate wifi network

    Greetings! 
    MY HP Laserjet Pro 400 Color MFP M475dw (9 months old) no longer finds any wireless network in my home. It worked fine then stopped for no reason I can determine. Nor will it print via USB cable direct from my PC.  I opened a case with HP on 9/1/14 for this issue (Case [Edited for Personal Information]) but have only received emails from HP asking for a valid phone number and the address of the printer location, all of which has been provided several times. The first email from HP gave me a phone number to contact HP but that number was missing a digit (1-890-946-500). Please help! This printer is the only color printer I have to use for my home-based small business. Thank you! Wendy [Edited for Personal Information]

    Hello @windypoo ,
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Is it possible to restrict copying and printing a pdf?

    Is it possible to restrict copying and printing a pdf without setting a password? I just want to restrict using the document, but don't want a password-demanding window to pop up.

    Hei guys!
    I truly need your reply!
    Any reply or a hint or a reference to another application is welcome.
    Thank you!

  • HP LaserJet 400 Color MFP M475dw Problems in OS 10.9.4

    I'm using a 2013 MacBook Pro, 2.4 GHz Intel Core i7, 9 GB 1600 MHz DDR3.  I connect via wifi to the referenced printer (for almost a year now).  Since updating to OS 10.9.4 I am able to print only one document at a time.  Attempting to print a second document generates the message "Printer is not connected."  If I turn the printer off and back on again, I'm able to print one document.  Then the same thing occurs again.  I have done the following so far, all to no avail:
    Downloaded and installed latest driver (specifically for Mavericks) from HP
    Checked for Apple software updates and found none
    Reset the printing system (per instructions elsewhere in these forums)
    I updated to OS 10.9.4 on July 5th and that is when this problem started.  Where do I go from here???

    And BTW, here's a repost of what I posted on July 7th:
    I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd).  For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection.  A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S.  I discovered there was an updated printer driver on HP's website, specifically for OS 10.9.  Downloaded and installed it, and the problem was seemingly solved.
    Then I updated the OS to 10.9.4.  AARRRRGH!!!!!!  For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected.  I turn the printer off and back on, get one print job, then have to repeat the process.  Here are all the things I've tried to resolve the issue:
    Verified settings on the printer to make sure everything is set up properly
    Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification:  I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
    Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
    Searched help/support forums on Apple, HP, and the internet in general
    Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8).  I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
    All of these efforts have been to no avail.  The problem persists, and I'm at my wit's end how to solve it.  HELP, please..........anyone??????

  • LaserJet Pro 400 color MFP(m475dw) needs rebooting to scan to network folder

    If our LaserJet Pro 400 color MFP(m475dw) sits overnight or for a good majority of the day without scanning to a network folder it will need to be rebooted before it will connect to the folder.
    I have tried adding a different folder and the same issue occurs.  The printer is connected to the network via wireless connection.
    Once the printer has been power cycled the scanner now works fine to the network.
    I would like to figure out why this is necessary and find a fix for it.

    Good day,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Disable wireless broadcasting - HP laserjet pro 400 color mfp m475dw

    How do I disable SSID broadcasting for HP laserjet pro 400 color mfp m475dw.  I have turned off wireless configuration through printer web console, but it is still broadcasting.  I have also updated the firmware to latest available 20131028.
    This question was solved.
    View Solution.

    The information is in the manual.  Did you download it and read it?
    Go here.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=433754...
    Page 28 Network options.  Disable Wireless Direct.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP LaserJet Pro 400 color MFP M475dw

    Please help me how to change the pickup roller on tray 2.
    I.E how to rotate the roller in order to get it out.
    Thanka

    Hello Ajton,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Pro 400 color MFP M475dw is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Laserjet pro 400 MFP M475dw after new firmware no more WPA2

    Dear all,
    After I updated the above printer I was unable to connect to our WIFI network. Our SSID is hidden and has a WPA2 security. Before the upgrade everything was working fine, but now i'm unable to connect. When you enter the SSID manually it askes for the security encryption WEP or WPA. Where did the WPA2 option go???
    When we use WPA we are unable to connect.
    Can we download the older firmware again? I can't find it...

    Hello janwillem_v,
    The Laserjet Pro 400 MFP M475dw is a commercial printer. I would suggest to post in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How to restrict AS02 access to certain fields only

    How to restrict AS02 (Asset Master Record) access to certain fields only. Currently when you assigned AS02 to a certain user, this will enable the user to change all the fields in the asset master record. Suppose i want only the user to restrict the access to certain field eg.NDJAR (Life in Yrs).
    Thanks for your inputs.
    Regards,
    Robert

    hello,
    basis has to assign the proper activity with object A_S_ANLKL. in this case they have to allow activity 03 only with combination of Cocode,asset class. see some more details below.
    This authorization object is the first part of the object "asset master record."
    The definition at this level determines whether the user is authorized to process data in a given company code. The activity type for the transaction is also defined here. This authorization object is used for master data transactions, for the display of value fields, and for reporting.
    Defined Fields
    The following fields are assigned to the authorization object
    Asset class (specified by entering a value in the pop-up window)
    Company code (specified by entering a value in the pop-up window)
    Activity type - there are three different activity types:
    01 = Create
    02 = Change (including blocking and deleting)
    03 = Display

  • How to restrict the access of FUNCTION MODULE for others after transporting

    A Function module needs to be executed in one server and should be executed when others try to access it.how to restrict the access of FM to one application server after being transported using SM59.

    issue resolved

  • How to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some users and allow the access for some users?

    I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
    I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.  
    <location path="_layouts/15/InPlaceRecordsSettings.aspx">
        <system.web>
          <authorization>
            <deny users="*" />
          </authorization>
        </system.web>
      </location>
    <location path="_layouts/15/InPlaceRecordsListSettings.aspx">
        <system.web>
          <authorization>
            <deny users="*" />
          </authorization>
        </system.web>
      </location>
    When I tried the access on
    :<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.           
    Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
    Thanks
    Ramasubbu

    You can't do it from OOTB. 
    _layout folder is accessible to the users if they have read access in any of the site even subsite.
    You can modify *.aspx file, add your custom control which will check user.
    [custom.development]

  • Create user with DBA privileges with a restriction to access user data

    Hi
    I need to create a user with all DBA privileges with a restriction to access all user schemas
    Thanks,
    Balaji

    Use Database Vault - http://download.oracle.com/docs/cd/E11882_01/server.112/e16544/toc.htm
    HTH
    Srini

  • How to restrict user access in Oracle Application Server 10g (9.0.4)?

    Can anybody please let me know how to restrict user access in 10g AS? To be specific, how to allow http requests from specific IPs only?

    Hi,
    You have to edit httpd.conf and modify acces rights for each protected directory
    e.g.
    <Directory /var/www/sub/payroll/>
    Order allow,deny
    Allow from 192.168.1.0/24
    </Directory>
    then you have to restart Oracle HTTP Server
    jm--

Maybe you are looking for

  • Special characters function stuck

    Hello: I've been a Mac person for just over a year and have just experienced the first "crash" of a Mac program. I was writing an email and needed the Euro symbol, but after I clicked on Special Characters in the Edit menu, the box wouldn't open -- t

  • Extended  periodic replacement list

    Dear All, I  have a question regarding to ISU DM - Extended  periodic replacement list: Last year, (2010) I created the peridic replacement  list. In 2011, at the customer's request, I changed the certification validity indicator for all devices - in

  • Another Tabbed Panel Problem

    I have inserted three image shows into a Three Tab Panel. The first show appears without a border which is what I want. But the second and third shows when clicked on appear with a narrow border on both sides. These borders appeared after I created a

  • Schema editing permissions

    I am trying to connect a EP 5 user management to a Novell eDirectory.  In the EP user management configuration screen, I got an error "Failed to check the directory schema necessary for the user mapping feature. (-2147467259) this error might happen

  • CS6 Having problems exporting buttons with rollover to dreamweaver

    Im trying to export out of fireworks cs6 buttons with rollover and import into dreamweaver cs6. It looks good in dreamweaver until i view it in internet explorer here is what it comes out like.