Restrict disk access on Time Capsule

I have a 2TB Time Capsule with 2 external drives connected to it through a usb hub.
Now I want to restrict access to one of those external drives. Meaning I want one user on the network to have access to to the TC drive and all other external drives, while the other user should have access only to the TC drive and only one of the external drives.
Apparently there's no way to do it through Airport Utility (it can only grant/restrict access to all drives at once), so I thought there might be a way to do it through sharing permissions...
What would be the right way to do it? Can anyone help, please?
Thanks.

As you have surmised, the Time Capsule (or AirPort Extreme) does not offer a lot of options in configuring to grant access to drives used by either.
Using the "With accounts" option, you can’t set permissions individually for folders or files on each hard disk, nor set permissions differently for different partitions or different hard disks.
In addition, when employing multiple drives, you really can't choose which partition will host the user-specific account folder ... the folder required to store the actual access permissions. On the partitions that don't have this folder, it is served as a single, whole-partition volume with no access controls. For the Time Capsule, these user account folders are always placed on the internal drive ... so it will be the attached drives without the controls.
If serving up multiple drives, each have unique access control criteria, I'm afraid that you will have to look at another solution.

Similar Messages

I can no longer access my Time Capsule disk

After upgrading to SL, I can't connect to the disk in my Time Capsule. It shows up in the Shared part of the Finder sidebar as usual, but clicking on it generates a gray bar that says "Connection Failed." On the right-hand side of this bar is a "Connect As' button, and clicking this gives an error popup that says: "There was an error connecting to the server “Wonderland”. Check the server name or IP address, and then try again. If you are unable to resolve the problem contact your system administrator." I don't know how to change the server name or IP address, and when I enter the IP directly from "Connect to Server" I get the same error message. Trying to set up the disk in Time Machine also gives the same error.
The odd thing is that the disk is visible in Airport Utility, which even tells me how much space is being used. "Enable file sharing" is still checked.
Any ideas what I can do?

Sad to report that unplugging and re-plugging the hard drive did not help. I had high hopes!
Un-mounting and re-mounting the external hard drive didn't help either.
I've moved on to deleting the time machine preferences per another suggestion in another thread - still no luck.
I continue to get the Making Backup Disk Available warning in the Time Machine Preferences window as the little progress bar spins for 20+ minutes. The whole time, I can hear the external hard drive clicking and chirping like it's being accessed- then the Time Machine preference window reports the same past warning: *The backup disk image “/Volumes/300GB BACKUP/myname’s Mac mini_00254bb40536.sparsebundle” could not be accessed (error 109)*
Off to cruise some more forums for a possible fix - suggestions continue to be welcome!
Jamie

I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).

When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?

I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

Remote access to Time Capsule won't work

Over the past couple of months I've been doing lots of research and planning into replacing my Mac Pro and old MacBook Pro with a new Mac setup. I was looking for efficiency, productivity and ultimate portability so the Macbook Pro Retina and Time Capsule grabbed my attention.
I was interested in the MacBook Pro Retina for work (travel) and home leisure use. Due to having so much music and video iTunes content, I was interested in purchasing a Time Capsule and a secondary external hard drive, placing all my iTunes content on the Time Capsule which I would then back up to the external hard drive when I was at home. I would then setup Time Capsule to be accessible over the internet so that I could view my media content through iTunes wherever in the world I was (internet speeds permitting of course). By doing this I could carry only my work files with me on the 512GB SSD Macbook Pro Retina, but could access the Time Capsule media files remotely, either via wi-fi or by tethering my iPhone 5.
So I purchased a Time Capsule to test my theory. I followed online guidance on how to achieve such a setup and using my 2008 MacBook Pro (which runs Snow Leopard) and a friends internet connection I got the system to work. I was able to remotely contact Time Capsule and watch High Def video content via wireless internet and even tethered to my iPhone. So I went and purchased a Macbook Pro Retina (running Mountain Lion) and set about setting up the system in the same way. But this is where something's gone wrong. I can't connect to the Time Capsule over the internet at all.
The Air Port utility has been updated to version 6 which is lacking the ability to instruct the Time Capsule to "Allow access over WAN". I thought I'd make sure it still connected via the internet using my old MacBook Pro, which had definitely worked perfectly just a couple weeks earlier, and that won't work either. I can't find the option to "Allow access over WAN" within Airport Utility 5.6.1 either? And the simple apple script application that I wrote (following an online guide) to open the remote connection to Time Capsule with the double left click on an icon has stopped working too.
I don't pretend to be a network engineer and I'm no I.T. expert, though I usually manage to teach myself what I need to know to sort issues like this out, but this has gotten me really stumped! I tried downloading an old version of Airport Utility to see if that had the "Allow access over WAN" feature (within the 'Disks' > 'File Sharing' area of Airport Utility) but my Mac OS won't allow the old versions to run.
Perhaps the version of Airport Utility I used on my Macbook Pro a couple of weeks ago didn't have the "Allow access over WAN" check box either and I just didn't notice - which is likely unless Airport Utility updates itself in the background without any prompts etc. I certainly didn't notice a software update for it any time over the past few days. Either way, I don't understand how it could have been working a few days back and now it's suddenly not.
I used this guides to gain remote access to Time Capsule successfully just a couple of weeks ago:
http://www.youtube.com/watch?v=SIQ7SzA1cK4
Can anyone shed any light on the issue and point me toward a fix please? I'd appreciate the help.

Thanks LaPastenague. I'm not sure if I have a static IP but I can confirm it hasn't changed in the past month.
I've pretty much come to the conclusion that what I want to do isn't really possible using Time Capsule. Like I mentioned, I had remote access working a couple of weeks ago but it seems like apple have updated the firmware or airport software to remove something that was necessary to remotely connect in the same way. And even if I did get it working I think it would still be so restrictive, requiring a fast wifi or mobile phone tethered connection to view my media files over the internet.
I got connected via iCloud and B.T.M.M. but the connection was very slow and video wouldn't stream well at all (painful). It seems that the speed constraints would make it very frustrating each time I simply wanted to look through my vast iTunes music collection or movie library. Album covers won't appear either.
Even if it were possible to connect via a static IP I just don't think that the WAN connection would be stable or fast enough to offer an efficint solution(?), so I'll probably have to by an external portable HD and use Time Capsule for Time Machine and Printer Sharing.
I wish I could stream my iTunes movies and music successfully over the internet, but right now it just doesn't seem possible.

Can I access my Time Capsule over the Internet?

I want to know if it is possible to access my time capsule Hard Disk over the internet, How do I do it?

"Launch AirPort Utility and select "Manual Setup". Click on the "Disks" icon in the title bar, then on the "File Sharing" tab. That's where you set your Time Capsule to share as you want."
OK, checked that last night at home.
I'm at the hotel now with a good internet connection via ethernet.
What do I do now? Please provide step by step rather than a general statement.

I keep getting this error message: Time Capsule could not complete the backup. The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBook Pro. sparse bundle" could not be assessed (error -1). Tried restarting etc. Please help.

I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....

The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process.

FTP access via Time Capsule

Hi
looking for help in this. My TC has the address 192.168.1.1 (I guess this acts as the router). My ibook has the address 192.168.1.3 (set by DHCP). Using manual set up in the Airport Utility I go to Internet > NAT > Configure Port Mappings > Add FTP Access and put 192.168.1.3 as the private IP Address. However, when I try to access by FTP using Transmit I get "server closed connection" error message.
Any ideas ?

I don't have a Time Capsule to test, but if you go into the preferences panel called sharing, and turn on the feature called "remote login" this will enable ssh and sftp. Do that on the one Mac where you want to share out the Time Capsule disk. On Time Capsule, I assume you get a similar software GUI as with a regular Airport Extreme, right? If so, open up the Airport Utility on the Mac that is authorized to make changes to the Time Capsule device and go into the manual set up. Click on the "Advanced" icon (its looks like a gear symbol) in the AirPort utility's GUI, then click on the NAT tab. Click on "port mapping" and then click on the plus "+" symbol and, using the pull down menu, select "remote login - ssh". This should enable port 22 on your TC. You would log into the same account on your Mac as you do when you boot up, so use that account and password.
I hope this helps.

Is it possible to remote-access my time-capsule to my home and downloads directly to it?

Hello,
I have only Macbook Air and iPhone.
I was wondering if its possible I could remotely access my time-capsule at home while I'm away and send downloads to it,
Once I get back the downloads are finished.

Is it possible to block access to the TC external hard drive
I am guessing here, that you may mean access to the internal hard drive on the TC
Set up a disk password for the Time Capsule hard drive.....and only give it to those that you want to have access to the hard drive.
This is not a foolproof method.....there are none, actually.....but it will keep honest folks away.

How do I access my time capsule over the internet

How do I access my time capsule over the internet. I've already set it up to share over WAN, but I have ATT so my TC is connected to the router provided by ATT can I still access my TC via the internet even though its not directly connected to the Ethernet?

The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
Google search this.. there is huge number of resources available. eg
http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

Access your TIme Capsule from a different network?

Okay, I've been looking everywhere for a guide or how-to to do this, but my searches have been more or less fruitless, coming across outdated, incomplete or incompetent so-called "guides", so I thought I'd finally post a question myself, and see if anyone has actually been successful in doing this.
What I want to do is be able to do is access all the files stored on my Time Capsule from anywhere (using accounts and/or passwords), provided I have an internet connection. I use my Time Capsule as an external hard drive, and it's great at home, but I have a lot of music, movies, photos etc that I don't have space for on my MacBook, so being able to connect to my Time Capsule from other locations would be awesome. I have seen many guides and how-to's, but no matter how closely I follow the steps, it never seems to work. If anyone has had any success using one of the guides, feel free to post the link below.
I am running the latest firmware on the Time Capsule (7.5.2) - the serial number is 6F01208ZAQG if that helps, the latest version of Airport Utility (5.5.2), my Time Capsule is connected to the internet via a Thomson TG585 v7 router (via Ethernet cable), I am on a MacBook running OS X 10.6.5, which is connected wirelessly to the Time Capsule, and if it makes any difference I am in New Zealand.
Any information would help, but if you're going to say "it doesn't work" or something not-so-helpful like that, could you please give a reason? I'm tired of you pessimists shooting everyone down.
Thanks in advance,
Ryan

Welcome to the discussion area!
It's been some time since I have used the "feature" to access files on the Time Capsule over the internet, so I can't remember all the details from 12-18 months ago. Some specifics I do remember:
1) You must have a "static" IP address for your internet service from your ISP
2) You must use a simple one port modem that will allow the Time Capsule to be the "main" router on the network
3) You must use Mobile Me from Apple to set this up
However, I notice that Apple no longer talks about this feature on the newer Time Capsule literature online, so that might be a hint that it is no longer being supported.
When did have it working, even small file transfers took forever. The connection, if I was using wireless, was often lost before transfers could complete.
I haven't tried the "how to" in the article below because I no longer travel for my job, but it might be worth a look for a different approach if Mobile Me is no longer providing this service.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
Message was edited by: Bob Timmons

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

Remote access my time capsule when mobile me is no longer offered? And I do NOT have a static IP?

How can i remote access my time capsule when mobile me is no longer offered iCloud is months away and I do NOT have a static IP?
I feel that apple has crippled the functionality of my time capsule as I can no longer access the files abroad!

Try the advice in this thread.

HT1331 How to connect external hard disk to airport time capsule and use it throughmy ipad ?

I Have connected an external usb hard disk to airport time capsule. pleasea help me to configure it from my ipad and use it from my ipad.

You need the disk formatted HFS+ on a Mac.. you cannot format disks from the airport utility and there is no hard disk utility of course on ipad.
Once you set it to share.. then you need to load a file app to the ipad as it has no ability to natively handle files.. check out filebrowser as a standard one.. but there are several available.

I want to access my time capsule on the go? can anyone help me?

i would like to access my time capsule when i am not home in order to see certain files while im at work and not having to travel with usb's .
I want to access my time capsule on the go basically , can anyone assist me in this process . thanks a lot!
pierre

See this thread.
https://discussions.apple.com/thread/3699096?tstart=0
And the apple docos on btmm and icloud

The backup disk image "/Volumes/Time Capsule Disk/Earl Burroughs's MacBook Pro.sparsebundle" is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....

The backup disk image “/Volumes/Time Capsule Disk/Earl Burroughs’s MacBook Pro.sparsebundle” is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....

The Backup disk image ... sparsebundle ... is already in use.

Restrict disk access on Time Capsule

Similar Messages

Maybe you are looking for