Restrict equipment from production planning while m/c under preventive main

Dear experts,
Can somebody guide me how to restrict an equipment from production planning while that machine is under preventive maintenance.
Thanks & regards
R.A.V

Hi,
Equipments r part of PP Work Center, in eqpt master record IE02 , u need to maintain PP Work Center as well as PM Work center and when u create MO or generate preventive order on that eqpt , if u put system condition in Order as O - Reserved for maintenance , then PP Work center capacity gets blocked .. , now if u create a PP Order at same time , system will allow you to create a production order and if u have a capacity availability check in PP Order while releasing , u can block the release of the pp order ..
So in transaction OIOI for business view 2 in capacity availabilty un flag the no check, give Overall profile and make release Order as 3- No release if Capacity in not sufficent ..
try the above and check if it meets u requirement ..
regrds
pushpa

Similar Messages

I have an unlocked iphone 4s bought from apple. Will be in London and Paris and would like to know if how I can purchase a data plan while on vacaqtion

I have an unlocked iphone 4s bought from apple. Will be in London and Paris and would like to know if how I can purchase a data plan while on vacaqtion

Can I still use the phone in Boston when I move there?
Only on a supported GSM carrier.
Will there be networks I cant use?
Yes. CDMA networks.
As I understand it the 4S supports GSM and CDMA networks worldwide.
No, you've misunderstood. The GSM iPhone you can buy in Ireland supports GSM networks only i.e. AT&T

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Error,while importing METADATA from production to development

Folks,
I am getting the following error while importing the metadata. I have exported from production server and want to do some modification to the existing mappings. Can some body help me to resolve this?
Here is the error.
Import started at 10/07/2004 11:12:19 AM
* Import for OWB Release: 9.0.2.56.0 Version: 9.0.2.0.0
* User: owb_rep Connect String: (DESCRIPTION=(ADDRESS=(HOST=vectrenabp)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=SDWSTEST)))
* Data File: C:\oracle\OWBHome\owb\bin\win32\SDWSDEV-MAPPINGS-20041007_0916.mdl
* Log File: c:\oracle\OWBHome\owb\bin\win32\Log.log Log Message Level: ALL
* Physical Names: Y Mode: CREATE Character Set: WE8MSWIN1252
* Ignore Universal Identifier: N Commit At End: Y
Informational at line 15: MDL1205: PROJECT with Unique Object ID (UOID) <85247BBFEA1B44C6B10CDB3B70155A63> already exists, so PROJECT with physical name <SDWSDEV> and logical name <SDWSDEV> not imported.
Informational at line 24: MDL1205: DATAWAREHOUSE with Unique Object ID (UOID) <268F5A9F43364309A8C0D01374C4A867> already exists, so DATAWAREHOUSE with physical name <DWH_TARGET> and logical name <DWH_TARGET> not imported.
Error at line 141: MDL1247: Error occurred importing mapping <DWH_ZIP_CODE_DMGRPHCS_DIM_MAP/DWH_ZIP_CODE_DMGRPHCS_DIM_MAP> (at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:

I have selected the option
Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
1. deleting the existing mapping and tried.
2. Putting the mapping in recycle bin and try.
3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
Error occurred importing mapping
<DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
(at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:
In above all cases it is giving me the error.
Could you please help?

Error while copying PIR from original plan

one requirment plan is there in system ,say X - Ver 00 (Product P1,P2,......P8 Demand is there of 10 ea for each product for 07/2007.)
I am using MD61, now I want to copy the same plan to another requirement plan Y (for 08/2007)
MD61 -> Entered req. plan no. as Y ver as 01 , References button on top left corner used , copy from original plan , in the dialogue box req. plan X entered , here system shows only P1 qty as 10 , for all other products from P2-P8 qty appears as blank. Select all & copy gives error.
No schedule lines exists for P2,.....P8.
Please explain.

Go to md61, select radio button -- req. plan no as --Y click on ref.
Copy from-Independent requirements-select-(green tick)-give req. plan no X (from where you want to copy all data)---select(green tick)
system will display old plan-select all-copysystem will disply p;lan which is copied from plan X-do the changes where you want. Save it.
Go to Md63-give req. plan no as Y--stystem will display the new plan

I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope y

I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC

Thanks,
I have tried with a new site it's working perfectly.
See the screenshot of the error.
Thanks for your support Rohit

How to migrate Planning from Production to Disaster-Recovery server?

We are using Planning 11.1.1.3 Oracle repository. Presently our DR Planning Application name is different than production's name, and the DR's Windows server names are different from Production's. Otherwise, all other configuration the same.
How do we migrate Planning from Production to Disaster-Recovery server? We stopped Planning on DR server. Then we exported production planning Oracle repository and imported it to DR Planning. We restarted DR's Planning. DR planning seems to be running fine, but I am afraid to click "Refresh Planning" on DR Planning - it might update Production server. So how can I be sure DR and Production planning are disconnected ?
Is there anything we need to do? This method seems to be faster than migrating with LCM.
Edited by: Essbase Fan on Oct 18, 2010 10:11 AM

You are definitely go about it the correct way, if you are migrating the whole planning application I have to agree it is a safer and quicker route.
The connection information to essbase is stored in the planning system database/schema so as long as you have not migrated that then you should be good to refresh.
To put your mind at rest, log into the planning application and edit the datasource associated with the application then you will see where the essbase server is it is going to refresh.
Cheers
John
http://john-goodwin.blogspot.com/

Error while production planning run

Hi,
I got this error "No gap for activity ||| found within the planning horizon" during production planning run.
Diagnosis
    There is not a large enough gap for the activity ||| on the mode
    1- in the planning period specified in the time profile.
System Response
    The system does not schedule or reschedule.
What could be the reason for this error ? Kindly help.

Hi,
   One reason could be the Time Bucket.
Please check your time series assigned for production planning run.
Check the PPMs and maintain the scheduling data .
Please let me know that whether you have transferred the data from R/3(Materials, WorkCenters, BOMs,PPMs) or you are doing manually in APO.
Let me know then i can tell you the right approach.
Regards,
Santosh

Transport planning book from Production to Dev/ Test system

Hi APO Gurus,
I need clarity for below mentioned point u2013
I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
How to do this? Please elaborate with details
Thanks in advance.

I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
-Sachin

CTM does not consider orders from ECC process, to calculate the master production plan

Hi gurus, Any of you worked in a scenario where CTM should consider the process firm orders from ECC? I am currently working on a stage of planning, whereby CTM should consider orders from fixed ECC, as projected inventory available for the planning of needs. However at present not the underway. any idea or suggestion? Thank

Hello:
Thanks for the prompt reply. Unfortunately, profile selection orders, are all ATP category.
Here I put an example of behavior that has the result set of CTM
SCENARIO CTM
WEEKS
INITIAL
1
2
3
4
5
6
DEMAND
-100
-100
-100
-100
-100
-100
PRODUCTION (PLANNED)
100
100
100
100
100
50
PRODUCTION (FIXED)
50
STOCK
0
50
50
50
50
0
SCENARIO EXPECTED
WEEKS
INITIAL
1
2
3
4
5
6
DEMAND
-100
-100
-100
-100
-100
-100
PRODUCTION (PLANNED)
100
50
100
100
100
100
PRODUCTION (FIXED)
50
STOCK
0
0
0
0
0
0
thanks for your comments

HT203167 i have purchased this product MH3TJ4F9Y0 while getting download in iphone i have cancelled ,but its got debited from my account

have purchased this product MH3TJ4F9Y0 while getting download in iphone i have cancelled ,but its got debited from my account ,please advice how to retrive this?

Downloading past purchases from the App Store, iBookstore, and iTunes Store

Inspection plan has been deleted- GR from production

Hi,
We are doing a goods receipt inspection from production - origin 04.
The inspection plan group counter that was assigned to the inspection lot has been deleted.
is there a way to assign another valid inspection plan group counter to the inspection lot so that we can do GR with 04 origin.
Thanks in advance,
Manohar

Hi
is there a way to assign another valid inspection plan group counter to the inspection lot so that we can do GR with 04 origin.
Even if the Inspection plan is deleted...you can create a back dated inspection plan with another group counter.system automatically propose next group counter.
Now lets say that your lot is already created & you want to assign the new inspection plan..
then go to QA02
click on reset sample
save.
now again go to QA02--->Inspection specification >click on Inspection specification>click on sample.
save.
check the status as REL for inspection lot.
Now take UD
I hope you understood
Regards
Sujit

HI, I'm planning to Purchase Macbook Pro from United States while I'm there but later I will go back to India. Does it come with international warranty or do I have purchase serperately ? Regards, Mohan

HI,
I'm planning to Purchase Macbook Pro from United States while I'm there but later I will go back to India.
Does it come with international warranty or do I have purchase internationaly warranty serperately ?
Regards,
Mohan

Apple's warranty is global. However, some countries have laws which over rides Apple's warranty. To check to see if India is involved read the info in EU-wide Consumer Laws article.

What is the best way to untangle myself from my parent's phone plan while keeping my number?

I know what I would like to accomplish I just need to figure out the correct steps to take. So the situation at present is that I have a line which is tied to my parents Verizon account that I would like to take over. However, I do not wish to alter my parents plan since they are grandfathered in for an unlimited data plan. Additionally, I am trying to start a new plan with my fiancé who does not currently have Verizon phone.
I have a series of questions so the answer to any of them would be greatly appreciated.
1) If do an assumption of liability for the line I currently use will it terminate my parents contract or result in any fees being charged to their account? Will they still have the same plan text, talk, data limitations? Will removing my line from their plan result in a price change for them (since it will be one less line on the plan) or will it remain the same because the plan they are enrolled in is no longer available?
2) If I assume liability for the line does that count as initiating a new 2-year contract? If it does can I add a new line to the plan at that point? I’m also curious if I’m I eligible for the new 2-year contract pricing on a new phone if I assume liability for the line?
3) Is my life going to be infinitely easier if we both just ditch our old numbers? Might it be a better (or even possible) alternative to get a new plan with 2 lines and port our old numbers? (Keeping in mind I don’t want to mess with my parents plan) For instance essentially trading the phone number I use on my parents line for whatever number is assigned the new plan I sign up for? And is it an incorrect assumption that my fiancé can keep her old number from Straight Talk?

clarificationrequired wrote:
I know what I would like to accomplish I just need to figure out the correct steps to take. So the situation at present is that I have a line which is tied to my parents Verizon account that I would like to take over. However, I do not wish to alter my parents plan since they are grandfathered in for an unlimited data plan. Additionally, I am trying to start a new plan with my fiancé who does not currently have Verizon phone.
I have a series of questions so the answer to any of them would be greatly appreciated.
1) If do an assumption of liability for the line I currently use will it terminate my parents contract or result in any fees being charged to their account? Will they still have the same plan text, talk, data limitations? Will removing my line from their plan result in a price change for them (since it will be one less line on the plan) or will it remain the same because the plan they are enrolled in is no longer available? The AOL will not result in any additional fees on your parents plan, and will simply remove your line, leaving the rest of their plan intact. The cost of your line will be dropped, as it is no longer part of the plan. If they still have the unlimited data, then it sounds like the Nationwide plan, so your line would be either $10 or $10 + $30 if you have a smartphone. That amount would simply drop off.
2) If I assume liability for the line does that count as initiating a new 2-year contract? No. Your contract remains the same as it was, with the same upgrade / contract end date. If it does can I add a new line to the plan at that point? I’m also curious if I’m I eligible for the new 2-year contract pricing on a new phone if I assume liability for the line? You can split off into your own plan, keep your number, and add a line for your fiance. You can port your fiance's number from Straight Talk to the new account. There's no reason to "ditch" your current numbers. In fact, by starting a new plan with a new number and cancelling your current number on your parents plan, WOULD result in an ETF if the # is still in contract. You would probably be eligible for 2 yr pricing on the new line for your fiance, and she likely would need a new phone to work on Verizon (ST may or may not work on a Verizon contract account, I'm not sure). Your line would carry over with the same eligibility it has now.
3) Is my life going to be infinitely easier if we both just ditch our old numbers? Might it be a better (or even possible) alternative to get a new plan with 2 lines and port our old numbers? (Keeping in mind I don’t want to mess with my parents plan) For instance essentially trading the phone number I use on my parents line for whatever number is assigned the new plan I sign up for? And is it an incorrect assumption that my fiancé can keep her old number from Straight Talk?

Error while import XML file from Production to Dev., But has GREEN status

Hi,
I tried to export/import bex queries through XML transportation. Transportation is being done from Production system to Development. In transport connection I selected required query and then I exported to Development. export of file is done successfully.
Now in development system I imported that XML file. It is imported. Giving GREEN symbol and also with GREEN check. But in Log view I found ERRORS. in errors it is mentioned "SAP object 46N3K1OCT22PSBN46O95MQLTJ () cannot be imported". along with long message text "Install the specified objects from Business Content. Only import the metadata afterwards.".
What should I do now as of next step... import of file is stuck..
How can I search object 46N3K1OCT22PSBN46O95MQLTJ (), if I have to install from BC.
I am also unable to find the query in Development Bex analyser.
Thanks for help....
[email protected]

Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Restrict equipment from production planning while m/c under preventive main

Similar Messages

Maybe you are looking for