Restrict Info Record Creation Based on Material Type

Dear colleagues
I would like restrict material info record (ME11) creation based on given materialsu2019 material type (MARA u2013 MTART). Is it possible such control? If yes, can you please provide the way?
Best regards

Dear AP,
Unfortunately I wasnu2019t able to find any user exit, badi or etc. That's way I need to post the question to the forum. Before providing any answer please consider that no question is post without any research and give the audience specific, to the point answers not such irrelevant ones.
Thank you

Similar Messages

Info Record creation for Pipeline Material

Hello,
I am having issued while creating the Info records for a Pipeline Material(water)
This is the error.
"Material XXXX not a pipeline material" where as I have created the material as a Pipeline.
I have Info Record created previously for other plants within same Porg and CC.
Need the Info record in the Process Order where it does not allow to confirm the Order without the price that comes from Info Record
Can anyone tell me what is the issue?
Thanks
SAP Fans...

Hi,
Confirm that the material XXXX is created under material type "PIPE"
check for the material type in T code OMS2, whether "Pipeline mandatory" is active. And under "Quantity/value updating" option "Quantity updating" and "Value updating" should not be active.
Hope it helps..
Tx
Uts
Award f helpfull

Block sales order creation based on material qty

Hi,
In my scenario i want to block the sales order creation based on material qty , how i can do this?
Example:
Material qty below 100 = able to create sales order
Material qty above 100 = not able to create SO
Thanks,
Arun

Hi
For restricting the order if it is less than a specified qty, you can maintain the 'min order qty' in material master.
But your requirement is the other way round - Restrict order if it is more than specified qty.
In this case, you need to use the following sales order exit in progran MV45AFZZ
u2022 USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Hope this helps.
Regards
Madhu

Authorization based on Material Type.

Hello Expert,
We have different material type but we want give access based on Material Type to User.
For Eg. In Transaction Code :- ME39 Display Scheduling agreement Schedule
I wants to restrict user from access/Component Overview of particular material type.
how to do this, This is the client requirement.
thanks,

Hi Julius,
of course it is not possible. the multitude of application transactions cares nothing about authorisation objects bound to the material master like M_MATE_MAR or the other one with authorisation groups (which has the additional disadvantage that you would have to group all materials ...)
This subject has been stated in this forum various times, I put a small link farm here (only the most recent/relevant from the search function ):
So, here goes ... one more time: ME39 does not care about material master related authorisation objects unless you make it do so by coding something or other ...
Edited by: Mylène Dorias on Jan 18, 2010 8:29 AM

Prevent Info Record creation?

Is it possible to prevent the creation of Info Records for a particular material group?

take a look this one Material Info Record User Exit Help
Edited by: djames on Jul 21, 2010 2:44 PM
Edited by: djames on Jul 21, 2010 2:44 PM

List of stocks based on material types

Hi,
I need a list of stocks overview based on material types.
Ex:
Need a list of current stocks for finished materials.
Kindly help reg this.
sathya

Hi,
Check in MC.9 transaction to get the list of stocks based on the Material types along with materials & material description with Value & stocks
The Report will give you all the details with respect to material types, Material group etc. for a particular period or as on period also.
rgds
gsc

Field Selection Based on Material Type

Hello!!
Can any one tell me how to make a single field mandatory in material master based on material type?
I know we can use OMS9 to make it mandatory... the field i was looking is in a field selection group....when i make it mandatory i am actually making all the fields in the field selection group as mandatory...i dont want to do that...i just want to make only one field as mandatory.....
If some one has any kind of training documents...could you please send it across?
Thanks in advance.....

Dear,
Go through: http://help.sap.com/saphelp_45b/helpdata/en/08/6dec6eb435d1118b3f0060b03ca329/frameset.htm
http://help.sap.com/saphelp_45b/helpdata/en/8e/204b6e5733d1118b3f0060b03ca329/frameset.htm
Re: New Movement Type
Define field in a particular movement type
Regards,
Syed Hussain.

Restricting stock overview (MMBE) based on material or material type?

Hi,
Can we restrict any user from viewing material stock (MMBE) for particular materials or material group or material types.
Thanks
Nilesh

HI,
I cannot think of a way this is possible. You can only make these restrictions for standard LIS reporting info structures where the authorisation objects exist.
For example, auth object M_IS_MTART exists for material type covering LIS Standard Analysis: Info Structure / Material Type, similar for material group.
The only other place for material type restrictions in is the material master from object M_MATE_MAR.
However, check with your basis guys maybe they can think of something.
Thanks.

Multiple info records for the same material record in the catalog

Hi Guys,
I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
Systems:
SRM 5.0 (Classic implementation scenario)
ECC 6.0
SRM-MDM 2.0
PI 2005
Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
Your help would be appreciated!
Regards,
Skander

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Purchase Info Record - Creation

Hi,
I want to create a Purchase Info Record. I came to know that, the following FM's are used for creating a Purchase Info Record.
ME_INITIALIZE_INFORECORD
ME_DIRECT_INPUT_INFORECORD
ME_POST_INFORECORD
The following are my questions....
Is there any other FM's available for creating a Purchase Info Record. I want to test these FM's in SE37. Can anyone guide me with the minimum parameters required to run these FM's in SE37. How can I find the info record number created using these FM's.I mean to say.. there are no output parameters available in these FM's to know whether the PIR creation is success/wrong.
I request everyone to help me with your answers.
Many thanks !

Hi,
I am using the following information to execute the function module ME_DIRECT_INPUT_INFORECORD.
Material : 123
Material Group: 12164400
Vendor Account Number: 100015
Purchase Order Unit of Measure: PC
Purchase Organization: 460
Purchasing Group: 100
Currency Key: DKK
Plant: 316
I get the error 'Please adjust conversion factors in conditions'.
I do not know the root cause for this error. Can anyone guide me to solve this error? Have I missed any mandatory fields required to run the above mentioned FM?
Kindly help. Many thanks.

Authorisation restriction to change batch ( MSC2N ) by material type

Hi ,
We have a requirement wherein we want to restrict users from changing batch records ( MSC2N ) by material type. Viz. A user xyz should not have authorization to change batch for material type FERT.
We cannot use the authorization group ( BEGRU ) field of material master alongwith object M_MATE_CHG as this field is already being used for another purpose to restrict users by country for MM01,MM02 & MM03.
Please do let know if you know of any alternative method of doing so.

Hi,
The new authorization object will work only if the corresponding changes are made in the related program.
Open the program code for the MSC2N transaction (via Se93), and search for the string "AUTHORITY-CHECK". You will find a piece of code that checks for the authorization object M_MATE_CHG and its related field values. This will need to be changed to Z_MATE_CHG and its corresponding values.
You will need an ABAP-er for this.
Only then will the authorization check work correctly. Once this is done add the object in the corresponding role (and also change SU24 entry for MSC2N accordingly if required).
Regards,
Sanju.

Report based upon material type against movement type for a period ?

i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
sam

Hi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K

How to update info record price in to material master as a standard price -

Hi Experts,
We have a client requirement as below:
Client wants to compare the info record price per material for all related vendors.
Once he arrives at the best effective price (Material Price + Freight + Duty), he would want this price to update in the Material Master Record as Standard price.
I know we can use MR21 and LSMW to update this manually but we are looking to automate this process as we have more than 100,000 records in the system.
Can the above requirement be addressed through CK40N? if yes, How?
Thanks,
Jammy

Hi Jammy
Usually, in std SAP, if there are multiple condition records, the one with lowest price is considered by the system in CK11N/CK40N
Configure your valuation variant to pick up price from info record... As far as I remember, the one with lowest price would get picked up when you do costing run...
however, if your requirement is bit different than this, but is based on a logic which can be configured in the system, then use Valuation Strategy U in your Valuation Variant and write your code accordingly in the exit COPCP005 (Component EXIT_SAPLCK21_002.)
Regards
Ajay M

Creation of new Material Type - Asset

Dear Friends,
Here as per my client requirement, i have to define new material type for Asset Material.
For this definition i need following info -
1) Views to be selected.
2) Which Price control indicator is to be set for the ASEET
Material Type? (V or S)
Thanks in Advance

Hi
Material type for asset - Copy ROH.
Maintain the views Basic data, Purcahsing, Accounting, Storage views (only if you have profit center accounting )
Price Control give it as a Moving average.

How to restrict the idoc creation based on the distribution model

Hi all,
I want to create the idocs for certain material types only, for this i configured Distribution model and set the filter for material types.
If the delivery is created with the material type which is not in the filter means,
Idoc is creating for that Delivery with header segments only and restricting Item level segments.
it is coming to XI and failing in mapping every time.
I do not want to generate the whole idoc itself. Am i missing any thing??
Regards
Edited by: Suman gupta on Jun 10, 2010 11:13 PM

Hi Mike,
>>config in PI in the routing condition - if no lines exits don't send the message to the mapping/receiver
If no lines exists we can restrict don't send to receiver, but how can we restrict dont send to mapping??
It comes to mapping and failing in PI MONI.
Is there any way that i can restrict the Idoc generation itself in ECC ??
Regards

Restrict Info Record Creation Based on Material Type

Similar Messages

Maybe you are looking for