Restrict member movement through ODI

Hi All,
I was trying to restrict member movement while loading dimension members through ODI. I didn't see a setting within the Interface that can do that. In the pure Essbase world, you could restrict the dimension movement through the Rule files by simply unchecking the box "Allow Moves". If anyone has a solution, I would really appreciate the response.
Thanks

There is no equivalent for planning, why do you want to restrict moves really your source should only contain members you want to update.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Restriction for Movement type 202

Dear SAP Consultants,
I want to make the restriction for Movement type 202 by material document.
The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
Kindly give me the details for incorporating it .
Best Regards
Deepak Rade

HI,
202 movement type is the reversal movement type of 201 (goods issue to cost center)
when we cancel material document with 201 system create reversal posting with 202
And you can manually enter 202 movement type also in MB1A and MIGO
Now if you want to restrict user to use 202 directly
GO to OMJJ -> select movement type 202 ->allowed transaction ->Remove MB1A and MIGO and save
So you can only cancel a material document of 201 to create 202 not possible to create manually (without reference)
{IF in future needed you can always add those in OMJJ again}
You can cancel material document is through T. Code MBST
This will fully serve your purpose

Invoke web services through ODI

Hi,
i need to invoke web services through ODi. am usin the ODIInvokewebService tool. in that my url is : http://iflexlap-hga95:7700/XAIApp/xaiserver/CmAccountInboundService?WSDL
Operation is Add and for request file i have given the path of the xml of my request in the SOAP format. wen i try to execute am gettin an error:
com.sunopsis.wsinvocation.SnpsWSInvocationException: Cant find operation {0} for port type {1}.
at com.sunopsis.wsinvocation.client.impl.AbstractJWSDLParserImpl.getWebServiceRequestByOperation(AbstractJWSDLParserImpl.java:220)
at com.sunopsis.dwg.tools.common.WebserviceUtils.invoke(WebserviceUtils.java:141)
code generated was:
OdiInvokeWebService "-URL=http://iflexlap-hga95:7700/XAIApp/xaiserver/CmAccountInboundService?WSDL" "-PORT_TYPE=CmAccountInboundServicePortType" "-OPERATION=ADD" "-REQUEST_FILE=D:/Bijal/RJ_Work/Soap UI/AddAccount.xml"
am stuck an unable to move ahead. Would appreciate any guidance for the same. Thanks in advance
Bijal

declare
req_envelop VARCHAR2(4000) ;
req utl_http.req;
res utl_http.resp;
res_envelop VARCHAR2(32767) ;
BEGIN
req_envelop :=
'<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:odi="xmlns.oracle.com/odi/OdiInvoke/">
<soapenv:Header/>
<soapenv:Body>
<odi:OdiStartScenRequest>
<Credentials>
<OdiUser>SUPERVISOR</OdiUser>
<OdiPassword>SUNOPSIS</OdiPassword>
<WorkRepository>ODIWORK</WorkRepository>
</Credentials>
<Request>
<ScenarioName>Package_NAME</ScenarioName>
<ScenarioVersion>001</ScenarioVersion>
<Context>DEVELOPMENT</Context>
<Variables>
<Name>SFPARK.Variable1</Name>
<Value>abc</Value>
</Variables>
<Variables>
<Name>SFPARK.Variable2</Name>
<Value>123</Value>
</Variables>
</Request>
</odi:OdiStartScenRequest>
</soapenv:Body>
</soapenv:Envelope>' ;
req := utl_http.begin_request('http://'127.0.0.1:20950/oraclediagent/OdiInvoke?wsdl','POST','HTTP/1.1') ;
utl_http.set_header(req,'Content-Type','text/xml') ;
utl_http.set_header(req,'Content-Length',LENGTH(req_envelop)) ;
utl_http.set_header(req,'SOAPAction','invokeStartScen') ;
utl_http.write_text(req,req_envelop) ;
res := utl_http.get_response(req) ;
utl_http.read_text(res,res_envelop) ;
utl_http.end_response(res) ;
END;

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

HT201667 I rented a movie through itunes on my ipad and wanted to watch it with friends on a digital projector, but it wouldn't allow me to do it. Is there any way around this?

I rented a movie through itunes on my ipad and wanted to watch it with friends on a digital projector, but it wouldn't allow me to do it. Is there any way around this?

The issue was that a dialogue box came up which said that I couldn't play this movie on another device. I tried playing the same movie on an Tv with an HDMI connection attached to an adapter to the IPad and that worked. I wonder if the problem is that the digital projector has a VGA connection.

When I play a movie through iTunes, audio has no issues but video stutters and skips

Hey everyone,
I have a Dell 17R, Windows 8 64 bit, intel i7-3630QM at 2.4 GHZ, 8gb ram, Nvidia GT-650M at 1920x1080 using driver 320.49
When I play a movie in iTunes, the audio works flawlessly but the video will be smooth for a few seconds, stutter and then skip small 2-3 second spots. I haven't noticed that the parts skipped are any more graphically intense than other spots and there is no discernable pattern.
In the past, I have been able to play movies through iTunes with absolutely no problem but when I downloaded this most recent one a few days ago all of my movies have been experiencing the same issue.
When I stream other videos from other sources I do not experience the same problems as I do when I use iTunes. Streaming 1080P over youtube or a similar services is no issue.
I have updated my video drivers to the latest version as well.
I am at a loss, any suggestions would be appreciated.
Thanks!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W.

I bought a movie through my ATV and I am now trying to find it in my IPad. My problem is it only brings up music in the cloud and when I go to look on iTunes to renown load it, it wants me to buy it again. Anyway to get them on my IPad?

Hello all,
I recently bought a movie through my ATV. While I was working I tried looking for it on my IPad to watch , but was unable to locate it. I searched under the purchased section, but was only able to find my music. I went back onto ITunes to try an redownload it and it wanted me to purchase it again. There was also no warning with the movie eevn when I looked again about it not being available with the ICloud. With my tv shows such as The Walking Dead it would let me redownload it through ITunes. Anybody else have this problem?

I also live in the United States so redownloading shouldn't be a problem.

How can I set firefox to stack my tabs one after the other so that I do not have to move through tabs using the buttons at the ends

when I open multiple tabs which do not fit the tab strip I have to move through tabs using scroll buttons. is there any way way I can stack the tabs on each other or suggest me a add-on which can help me achieve this

You can consider to access the tabs via the list all tabs button.
You see the "List All Tabs" button in current Firefox versions if there are that many tabs open that you get the Tab bar scroll buttons appearing.
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/
The Custom Tab Width extension adds CSS rules to adjust the tab width settings as set by the browser.tabs.tabMinWidth and browser.tabs.tabMaxWidth prefs on the <b>about:config</b> page.
* Custom Tab Width: https://addons.mozilla.org/firefox/addon/custom-tab-width/
You can achieve the same with code in userChrome.css.
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#tabbrowser-tabs ~ #alltabs-button { visibility:visible!important; }
.tabbrowser-tab[fadein]:not([pinned]) { min-width: 100px !important; max-width: 250px !important; }
</nowiki></pre>

Is it possible to restrict SNMP access through firewall

My appoligies if there is already an answered discussion about this, that I didn't find.
In addition to just limiting the IP addresses allowed to have access and TCP/UDP port and direction of access, is it possible to further restrict SNMP traffic through an ASA firewall. Example 1: Can IP address IP_A on network A be forcibly limited to have only readonly SNMP polling access to IP_B on network B on the other side of an ASA firewall regardless of the community string it issues(or the configuration of device IB_B )?
IP_A ------- FW -------- IP_B
Example 2: Can IP address IP_A on network A be forcibly limited to have only readonly access to specific OID via SNMP polling access to IP_B on network B on the other side of an ASA firewall regardless of the community string it issues (or the configuration of device IP_B)?
IP_A ------> FW ------> IP_B
It looks like IOS 10.3 and above allow devices to have such access limiting. I was wondering if this could also be done via ASA for any end device.
Thanks
Jim

No.
An ASA can, as you noted, restrict source and destination IP and port. To do what you are asking, one would need to prevent a string within the payload from being transmitted (or only accept certain strings).
You should just put the access-list on the destination device(s) restricting what host(s) are allowed snmp rw (as you alluded to). That's a very common implementation straight out of the textbook.

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

I rented a movie through iTunes and it downloaded but won't play.

I rented a movie through iTunes and it downloaded but won't play. It is present in the videos app but doesn't load the picture for the movie. When I go to play it, it just opens and then closes. There is an iCloud icon that suggests the movie has not Been downloaded and when I click it it says that the movie has already been rented but not downloaded and that I need to go to downloads to manage it. It is not present in my iTunes download page however. And when I go to rent it again all I get is a watch button that directs me back to the videos app with no way to watch it.

Hi Refvoxa,
Thanks for visiting Apple Support Communities.
If you are not able to play or download a movie rental on your iPad, first restart your device:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
After your iPad restarts, try resuming the download again:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If the movie still does not appear in Downloads, and can't be played, I recommend reporting the issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Regards,
Jeremy

Error while Loading Entity Dimension through ODI

Hi,
When I tried to load the outline for Entity dimension onto the Planning (11.1.1.0) through ODI, I'm getting the following error:
7000 : null : java.sql.SQLException: Invalid COL ALIAS "STORAGE C2_DATA_STORAGE" for column "DATA"
java.sql.SQLException: Invalid COL ALIAS "STORAGE C2_DATA_STORAGE" for column "DATA"
     at com.sunopsis.jdbc.driver.file.bb.b(bb.java)
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.w.e(w.java)
     at com.sunopsis.jdbc.driver.file.w.executeQuery(w.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Kindly help.
-Jitendra

Hi,
Send over the models/interface and I will have a look.
Cheers
John
http://john-goodwin.blogspot.com/

Where are my purchased movies through iTunes stored on my PC? I need to back-them up on a hard drive and then I want to play them on my iPad

where are my purchased movies through iTunes stored on my PC? I need to back-them up on a hard drive and then I want to play them on my iPad

They're in the iTunes folder, in iTunes Media or iTunes Music depending on when your iTunes was first installed. The iTunes folder by default is in My Documents/Music.
Regards.

Can you view movies through the mini-DVI output?

Anyone know if you can watch rented movies on a TV with the mini-DVI output to video?

Anyone have any feedback on whether or not you can output rented movies through the mini-DVI to watch on a television?

What cable do I need to be able to watch a movie through my regular LCD TV?

what cable do I need to be able to watch a movie through my regular LCD TV?
I've haven't got any of the other cables for my Retina display, and I've tried connecting my Mac to my TV via HDMI cable, but no sound comes out and apprently I need another cable...?

Your HDMI output port should be carrying the audio signal to your television. If it's not, you can use a Thunderbolt->HDMI adapter that does carry sound, such as this one from Monoprice.
Clinton

Restrict member movement through ODI

Similar Messages

Maybe you are looking for