Restrict MIGO_GI at movement with Special Stock

Hi,
We need restriction in T-code: - MIGO_GI or MB1A.
In MIGO_GI there restrict GI for cost center with Special Stock
And MB1A there also show Special Stock.
Do you any possibility to restrict movement with Special Stock.
Amit

not exactly. no.
you can restrict the posting of special stock by granting/denying authorisations for movement types but no more. binding the movement type to an obligatory field 'cost center' is not a matter of authorisations, but of configuration - check transaction OMJN/OMJX et all on the how-to. that still would leave open that everybody can choose a random cost-center deliberately, so you have to use an additional enhancement/exit there ...

Similar Messages

  • Movement type 313 and 315 with special stock K.

    Hi,
    I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
    it is possible a movement type 313 K or 315 K?
    Thanks in advance.
    Anna

    Hi Anna Barnils ,
    Not possible.
    Read the below help:
    SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
    Regards
    Ramesh Ch

  • Movement type 313 and 315 with Special stock indicator Q requirment

    Hi Gurus,
    We have the business requirement to use the Mvt 313 and 315 with special stock Q (two step stock transport for storage Location to storage location transfer). But when we are trying to use the t-code MB1B with MVt 313 with Q its not available. We know its because of SAP standard.
    Also we suggested to use the Mvt 411 Q but users wants the 313 /315 with Q from moving the project stock by storage location to storage location and received the update as below.
    We have looked into the option of transferring the project stock to plant stock.  Unfortunately, as well as being transaction-heavy and prone to manual errors, this has accounting implications.  So, we need to be able to action the two-step transfer on project stock via the enhancement described in the SAP documentation.
    http://help.sap.com/saphelp_rc10/helpdata/en/0f/03df3a89ec880ee10000000a114084/frameset.htm
    The link is specific to PM config . Could any one can suggest me how to handle this one to do with 313  and 315 with special stock type Project (Q) to transfer the stock by two step transfer.
    Thanks,
    Sada

    It seems you have to activate business function set LOG_EAM_ROTSUB (transaction SFW5). After that the customizing node will be available:
    SPRO > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Orders > Functions and Settings for Order Types > Goods Movements for Order > Movement Types for PM/CS Orders
    (transaction: DI_0MVTPM)
    http://help.sap.com/erp2005_ehp_04/helpdata/en/a0/00e93a2876a81ae10000000a11402f/frameset.htm
    Edited by: Csaba Szommer on Jan 10, 2012 11:39 AM

  • ME2O report with special stock assignment (project stock)

    Dear Guru's
    Im tring to use ME2O report to monitor the stocks of subcontracting. In my business we have special stocks (project stocks).
    When I run the report it does not give the subcontracted stocks with project assignment.
    Am I doing something wrong or is there any otherway to achive this. I want to monitor the subcontractor stocks (with special stock assignment of project)
    Thanks in advance
    Rupesh

    can you explain this scenario a bit more
    subcontracting stock is stock type O, project stock is stock type Q
    I dont think one stock can have 2 stock types
    And ME2O is monitoring stock type O, not Q.

  • Goods mvt with special stock updated in consumption

    Hi,
    I understand that the goods mvt with special stock indicator such as Sales order stock and Project stock won't updae the total consumption in MD04 or Consumption in MMR, but can anyone kindly explain me the reason?
    Thanks.
    Nadali

    On the SD side, the special stock indicator on a delivery line item is copied from the sales order line item.
    And the special stock indicator on the sales order line item is determined from the item category.
    If you are referring to the MM side of things, (and based on your description of the use of the 'replenishment deliveries you might be), then there probably are corresponding configuration on the MM side of things.
    Matthew
    +1 (707) 276-6473

  • PGI using Stock with Special Stock Indicator "E". (STO)

    Hi,
    We are in the process of creating Stock Transfer.
    While doing PGI the System is displaying the following message:
    Only 0 EA of material 1103DGC22LB 08062009 available
    When we executed T Code MMBE, we found the Stock exits with Special Stock Indicator "E".
    Is it possible to do the PGI using Stock with Special Stock Indicator "E"?
    Or what would be best possible to handle this situation.
    Please guide.
    Regards,
    PK

    If the stock has special stock indicator E. then you can see this in MMBe as Sales Order stock. If you dispaly the details, then you can see the Sales Order number and item for which the stock is assigned. Unless there is some reason that you want to take this stock from the sales order (for example the sales order is to be rejected), then you shouldn't take this stock as you will be unable to fullfill the sales order. If you want ot borrow the stock, then you could do a transfer as advised by previous person from sales order stock to own stock and after you get replacement stock transfer some back to sales order stock, to fullfill the order. If you are using MTO then you could also create a new production order assigned to the sales order to make the stock in the special stock segment.
    Rgds
    Richard

  • Stock Report ( With Special stock Indicator E)

    Dear Experts ,
    I have done the  initial uploading for the stock of finished goods via 561-E for sales order stock ( make to stock ) & 561 for make to order stock .
    When i run MC.9 , the system outputs only make to stock materials .
    & when i run MBBS the system outputs only make to order stock .
    How can i see the entire stock ( make to order & make to order ) in a sinle reprt?

    Dear Brother
    Please use Transaction code MB52 and check in special stock indicate and run the report all data for special stock will be appear.
    Regards

  • Movie with special features won't play

    My sister sent me a movie that she purchased on her iTunes account and it sent completely to my iTunes.  It is a movie with extended features.  When I opened it in my iTunes it goes to a page that says "play", "chapters", "features", "more".  I am able to click features and more and it shows me those features however it asks me to authorize using my apple ID (even though it was purchased on my sisters).  When I go over to play movie or even chapters it will not let me play the movie at all and it does not even give me the option to authorize the movie.  She does not have 5 computers authorized on her account so there is no reason it should not work on my computer
    could anyone help with this problem?

    See:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    Try deleting and redownloading:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Stock with Special Stock indicator E, not allowing to perform 261 Movement Type

    Hi Team,
    Please provide your expert opinion.
    Unintentionally, a component was set with value Blank in Individual/Coll. field in MRP 4 view. The component is WM managed, when order was released, Transfer Request was generated & the part list was updated with Account Assignment M for that component. It was showing reference of sales order created for the header material.
    After TR was converted to TO, TO was also processed. Now the stock is lying in WM under Special Indicator E, due to which we are not able to perform 261 movement for this component, it throws error
    Sales order stock XXXXXX 000010 does not exist
    This Sales order is already processed & completed.
    We are in deadlock, since process order cannot be closed.
    Please suggest how to consume this component against the order or bring back the stock to normal
    Regards
    ND

    Your order for which you want do a 261 movement has information that this material is in sales order xxxxxxx item 000010
    now it is essential to know in the very detail what was done in sequence.
    As you usually need to clear the situation in the reverse sequence.
    Not just movements, as well master data changes.
    If we understand the full situation, then it might even be possible to do a short cut.
    But it is currently not really known if you have an inconsistency between IM and WM, or just missed some postings in WM (which has not really something to do with the error you have)
    We do not know how the to be situation should be
    And for the as-is we have only knowledge about the error message, but no details to previous movements which lead to this situation.
    And we have no info about the current book stocks to make a clear suggestion.
    Some situation require detailed analysis, a proposal made just out of the blue can cause an even more difficult situation and a longer way to clean it up.

  • Special Stock E with a deleted Sales Order Position

    Dear Experts,
    Does anyone know how to unlink or move an special stock lot for a Sales Order Position that was deleted? I have a situation where a have some stock produced in a MTO scenario and the Sales Order position does not longer exist and the phisical stock can not be used.
    Please advice...
    Regards
    Victor

    how was it possible to delete a sales order that had sales order stock?
    is it physically deleted or does it just have a deletion indicator?
    What error message (number of error message please) do you get when you try the transfer posting?
    Have you tried to count the special stock to zero  and count the material as unrestricted stock with a physical inventory?

  • Display special stock F with MBLB

    Hi all,
    i activated A&D in order to manage subcontracting flow with special stock E.
    When i perform ADSUBCON and the materials are sent to the vendor, i'm not able to display the special stock F (special stock E at vendor) using transaction MBLB.
    Why? What can i do?
    Thank you in advance

    Hi,
    Did you try MIGO - Transfer posting -others for Movement type 542 E?
    I hope you may be able to do it there.
    Regards,
    Kathir

  • Movement Type and Special Stock in Reservation

    Hi,
    I had created a Repair Order and via this Repair Order, system automatically created Service Order also.
    I had entered a component (Spare Part) in the Service Order. Upon saving System created a Reservation with Movement Type 261 and Special Stock E. As a result, during Service Confirmation, System is looking for Sale Order Stock of the component too. But here, the component will be available in Unrestricted Stock.
    How do I get just movement type 261 without the Special Stock indicator in the above scenario ?
    Thanks for help.
    Raj

    Hi Thyagarajan,
    The Reservation was for the Subcomponent of the Product that I entered in the 'Component Overview'.
    The Component Overview had
    Item 000 for the Main Item by default and 'Reservation Relevance/Generation of Purchase Requisition = Never'
    Item 0010, I entered the Subcomponent and 'Procurement Type (text) = Reservation for sales order' and 'Reservation Relevance/Generation of Purchase Requisition = Immediately'
    Movement Type in the 'Component Detail General Data' is 261 with Special Stock = E in the 'Value flow/Quantity Flow' section.
    I do not want E here as the Subcomponent will be consumed from Unrestricted Stock.
    Anything that I missed out ?
    Thanks.
    Raj

  • Special stock indicator for the sales order (VBAP-SOBKZ=)

    Dear All,
    I am getting a warning message while making an initial entry of stock with Mov.Typ : 561 and Special Stock Indicator (E), i.e., "The special stock indicator for the sales order (VBAP-SOBKZ=)is different from the special stock indicator in the goods movement.
    The system is allowing to post the initial entry of goods but when I am trying to do a PGI, it is throwing an error saying that, deficit of stock in the specific storage location.
    Can anybody help me out with this problem ?
    Reward points shall be awarded.
    Rgds,
    Indrajit Dey

    Hi Indrajit,
    Please post the stock with Special Stock Indicator (E), and againest sales order and item.
    Go to MB1C transaction enter Movement type,Plant and special stock indicator E.
    After that you enter Sales order Number and Item then save the document.
    Noe you try to do PGI,
    I hope it will help you,
    Regards,
    Murali.

  • Customer Stock (Special stock indicator B and item category C)

    Dear All,
    I am mapping my service center scenario in sap,
    We are consumer product manufacturer when material is wthin warranty or outside warranty, for any defects or replacement customer come with defective material to my service center.
    When i will post receipt for the material it should be the CUSTOMER stock,
    For that i need detailed information about special stock indicator B and movement type combination.
    also item category C in purchasing documents.
    plz tell me that i can directly configure these things in sap or B and C both are standard provided by sap.
    I am using 4.7 in my system B and C both are not available.

    Hi
    In the Standard Sytem these are the special Stock Indicators
    E     Orders on hand
    K     Consignment (vendor)
    M     Ret.trans.pkg vendor
    O     Parts prov. vendor
    P     Pipeline material
    Q     Project stock
    V     Ret. pkg w. customer
    W     Consignment (cust.)
    Y     Shipping unit (whse)
    I have not found B - Special Stock indicator.
    You can use Accotunt assignment Category D  - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
    Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
    Thanks & Regards
    Kishore
    Thanks & Regards
    Kishore

  • T-code for getting consumptions / usage on special stock Q materials?

    Hi,
    I am facing an issue: special stock Q is not included in all T-codes that I know for getting the consumptions / usage over a period.
    --> MC.9, MCBE etc.. are all not showing any results for those kind of materials.
    I found the explanation: it's depending on special stock valuation indicator (Blank, A or M), and only A permits to see the consumptions with MCxx T-codes, which is not the one used in the plant I'm currently working in (M)
    Since this valuation indicator is a FICO defined parameter, I cannot make it changed to be able to check those materials usage.
    Anyone has a tip or know a way to get usage on special stock Q materials?
    Thanks for any help!

    Hi Sanil Bhandari,
    Thanks for trying to help.
    Unfortunately MMBE is a snapshot of stock level and reservations by storage location on a single material, and does not display the consumption over a predefined period.
    I am still looking for any solution that works with special stock Q materials.

Maybe you are looking for

  • Unable to install CTM Client on a WIN 7 64 Bit machine

    We recently U/g a 64bit machine to Windows 7 and now we are unable to install the CTM Client. The error we get says unable to install due to machine configuration. Is there an update to the CTM Client we need. we are running 8.5.

  • Can't locate originals; but have aliases for album

    I can access aliases in Finder for photos from an album, but I cannot open them because I get the diaglog box saying "can't open because originals are missing" (that's paraphrasing, obviously). Are the aliases any good for recovering the originals? O

  • Stolen MacBook SERIAL # edited by host

    Hi Recently I had my MacBook (REFURB Model from the Apple Refurb Store) 2GHZ Core Duo/512Mb stole with SERIAL NUMBER <edited by host> Anyway what is my best course of action as regards contacting Apple etc & what can they do & could the MB be traced

  • My external HD with TM backup has disappeared

    I have a 1TB Titanium Green external hooked up to my Mac Mini with an 800 Firewire cable. It has two partitions, one containing the TM backup of my Mavericks system and the other containing a spare Mavericks startup disc and other vital files. Both h

  • JDWP exit error JVMTI_ERROR_INVALID_CLASS(21)

    I encounter a problem when I shutdown the (Plugin) tomcat5Server in MyEclipse6.5. My JDK is 1.5.17. The message shown in console is as follows: FATAL ERROR in native method: JDWP on getting class status, jvmtiError=JVMTI_ERROR_INVALID_CLASS(21) JDWP