Restrict network settings

Is there any way to restrict changes to the network settings - e.g. the DNS address for a wifi connection? We are pretty careful about what we let our pre-teen kids screen (at least when they are in our house and on our network). We use opendns.org as a content filter, but that can be easily defeated as long someone has access to DNS settings can simply route away.
I've seen how parental controls work on the iPad, but there do not appear to be any controls on General configuation settings. Am I missing something? If not, is there some reason why General settings should not be under parental restrictions?

Please tell your daughter that "great minds think alike". I'm currently using OpenDNS as well. The problem is that this solution relies on fixing the DNS entry in each client to point to OpenDNS's DNS server. Unfortunately, my kids (and their friends) are bright, and will eventually figure out they can simply point away from OpenDNS to my IPs default DNS and bypass OpenDNS. This thread is meant to see whether parental controls can be used to prevent this on an iPad. I'd rest easier letting my kids use an iPad in their rooms if I knew they weren't going to be chatting away with pervos on <social network of your choice> while I think they're doing homework.
Appreciate the feedback, though.

Similar Messages

  • Make sure your network settings are correct and your network connection is active, or try again later; Have been trying to fix for ages.

    Hi Everyone, been struggling all day to restore my settings on my ipod, as my little brother has put a restriction password in place and made me not able to get into Safari, iTunes, Camera which I really need. I have tried everything, resetting my proxy settings, turning off the firewall, changing my network location, ran diagnostics. Everything seems fine on that, I post below my results. I also tried restoring from the device, but with the restrictions code in place I can not do so. And everytime I am dowloading the software update before the restore it comes up with 'Make sure your network settings are correct and your network connection is active, or try again later'. I have been using google for ages and am not sure what I have missed.
    I am using Windows 7 with an Acer Notebook.
    DIAGNOSTICS:
    Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
    Acer Aspire One 753
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00BCBEE0093E4EF0
    Current user is not an administrator.
    The current local date and time is 2013-04-05 19:32:36.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {E1CB97AA-CDFF-4C43-8F63-658D7E70A39F}
    Description:     Intel(R) Centrino(R) Advanced-N 6205
    IP Address:     172.16.42.14
    Subnet Mask:     255.255.255.0
    Default Gateway:     172.16.42.1
    DHCP Enabled:     Yes
    DHCP Server:     172.16.42.1
    Lease Obtained:     Fri Apr 05 19:01:59 2013
    Lease Expires:     Fri Apr 05 20:01:59 2013
    DNS Servers:     172.16.42.1
    Adapter Name:     {44D6CC7B-1F1E-4F26-BBB8-18F98A868E2B}
    Description:     Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:     0.0.0.0
    Subnet Mask:     0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:     Yes
    DHCP Server:
    Lease Obtained:     Thu Jan 01 11:00:00 1970
    Lease Expires:     Thu Jan 01 11:00:00 1970
    DNS Servers:
    Active Connection:     LAN Connection
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-02-14 17:34:33.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Daniel Pugh's Ipod, iPod touch (4th generation) running firmware version 6.1.3
    Serial Number:     C3XDN3C5DCP7
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 5.0.1
    Serial Number:     C38GKQWZDT9Y
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Kindest Regards
    Daniel (Puggy858)

    Hi Diesel vdub,
    Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • I have had my ipod 4th generation for a year now and had not had any problems until now. My ipod no longer connects to my WiFi. i have reset my network settings, forgot my network and followed all of Apple's advice. Any ideas?

    The WiFi isn't working on my 4th generation anymore. I have several devices connected to the WiFi which two of them are iPhone 5 that haven't had ant problems with WiFi. I have had my iPod for a year. I have tried everything and it still doesn't work. Any ideas? Thanks.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • "Network settings have be changed by another application" stuck in loops

    I have the exact problem as others with Network System Preferences saying that the settings have been changed by another application. The message goes into a loop that can only be stopped with a Force Quit of the Preferences. I also have the Airport not connecting at start-up without choosing the Network Name from the Airport Pull down menu. I also think it may have started with the last Security upgrade and Java upgrade. I have used the airport utility to reconfig the base station. I discovered a system keychain with a password for the airport that my normal passwords would not open to show what it's password was. I have done many disk permissions and verifications. Any ideas? I would think if this is a Security update error, that Apple would be aware of it by now and post a repair. I have followed some threads on this issue but would rather wait for an Apple fix. There appears to be no way to contact Apple in customer support.

    A Fix for "Your network preferences have been changed by another application" Error
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting these files will cause them to be returned to defaults.

  • IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    Call your phone carrier - that's a problem for them to resolve.

  • Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

    Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

    A Fix for "Your network preferences have been changed by another application" Error 
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting.
    (10.4.10)
    Use Software Update to update your OS to last version of Tiger.  Install all the other updates that goes along w/it.

  • I have recently unlocked my iPhone 4. I got the comforation saying it was unlocked. For some reason I cannot access my network settings? Any suggestions. I am trying to use the phone on Net 10 network.

    I recently unlocked my iphone 4. I am trying to use it on Net 10's network. However, i cannot access the network settings. I have the Net10 Sim already in it. A few notes listed below of what i have tried:
    1.) I downloaded the iphone configuation utility. But  cannot get the right settings to apply. (so if you have the correct ones i could use those)
    2.) i have watched 1000 youtube videos and been on practically every page online and tried 1000 different versions of APN settings through the configuration
    3.) I do not have another SIM card from another carrier to try.
    Open to suggestions on how i can get the APN settings to change. Not worried about picture messaging or anything, but would like my internet to work. Calls and text work fine.

    i have seen this option..problem being...i dont have access to WIFI i live in the middle of ten buck too! We cant even get internet out here i have to go a friend house to get internet. I was going to try that once i did get to town but was looking for other options here at home frist.

  • Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them eithe

    Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them either failing or not sending at all.  Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

    Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
    My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

  • My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the  phone?

    My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
    To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
    Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
    This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
    I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
    Thanks in Advance

    Reboot.
    Restore (from backup)
    Restore (as new)
    Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

  • My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

    My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

    Does the iOS devices connect to other networks?
    Does the iOS devices see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Since both iPhone and iPod stopped connecting I suspect a problem with your network.

  • My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like resetting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?

    My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like reseting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?
    the iphone never really picked up wi fi when it was used as a phone and it didnt really matter because he had unlimited internet but it still wont go on wi fi. does any one know why it is doing this?
    The iphone works fine other wise i just really want it to go on wi fi. We just got new wi fi too and all of our other apple products go on the wi fi just fine. I dont know if its because its newer or what but my brothers 1st gen ipod goes on wi fi just fine.
    The iphone is updated to the latest ios too
    WHAT SHOULD I DO!!!!!!!!!!!???????

    This might help
    http://support.apple.com/kb/ht3406

  • My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fi network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fe network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding".  I am not able to connect with anything on the Internet.  Frustrating since I am able to connect with my laptop.  Thanks for the suggestion.

  • I phone 4 completely crashed after network settings reset?

    hello
    i recently experienced difficulty in connecting to wifi on my iphone 4, i tryed a new wifi receiver in the phone but it still did not work. so i tried
    to reset the network settings on the phone, and ever since i have done that the phone just crashes every 2/3 minutes and it wont charge....but says it is charging. i tried to do a hardware reset and also tried rebooting it through itunes, but due to it crashing it wouldnt work properly. the battery has now gone dead and the phone wont even turn on.....although when i plug the charger in the screen lights up and i see the apple icon.. but then nothing happens?? im completly confussed, does anyone have any ideas whats wrong with it????

    It doesn't matter how competent you are or how many screens you've replaced.
    There are NO legitimate sources for iPhone parts. Apple doesn't sell iPhone parts. The only possible sources are counterfeit parts, stolen parts, salvaged parts, or just plain cheap knockoffs.
    Your forfeited your ability to get service or support from Apple the minute you opened the phone.
    Obviously, something is broken. Find a competent 3rd party repair shop, ask your question someplace like ifixit.com, or buy a new phone.
    You can't get advice here on how to fix it.

  • Why do I have to keep Resetting Network Settings

    Hi All,
    Hopefully someone can help. Every time I need to access emails when I'm out this iPhone fails me.  Today, I tried to access an email from a client which consisted of 2 words "That's fine".  The wheel thing spun round, and round, and round, and round....  6 minutes later it displayed "this has not been downloaded from the server".
    I tried in vain to re-load but nothing. The only thing that seems to work is to "reset network settings".
    This then means that my wifi settings at home now need re-inputting, as do the wi-fi settings  at 3 of my other workplaces.
    If I could, I would swap this for a Samsung or something.  It's a constant source of frustration and embarrassment ( when I'm with clients)
    I've had the **** thing replaced at the Apple store and I have phoned my mobile supplier t-mobile/EE ( don't get me started on them...) about 20 times and no-one can make this problem go away. I hate this iPhone.
    Can anyone here help me?
    Many thanks
    Granger

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Maybe you are looking for

  • Issue in RRI

    Hi All, I have been facing an issue with RRI which is working fine in Development system. But when i moved it to UAT, it is not working. I have created the RRI between the report and the R/3 transaction. When i try to navigate from the report to the

  • How to set the value to non enabled UDF fields

    Dear All, I created a UDF at titile level of PO and that UDF item always disabled (i.e oItem.Enabled=false). Now how can set a value through coding. I wrote like this: oForm = SBO_Application.Forms.GetFormByTypeAndCount(-142, 1);                     

  • Dvt:barGraph - how to get value of clicked bar on browser side

    I am trying to implement a drill-down function where the end user selects a bar on the dvt:barGraph. I would need to be able to get the value of the selected bar, and pass this value to a third-party javascript library. I have tried experimenting wit

  • Customize window size  for HTML Help?

    My .CHM file opens up in a ridiculously tiny window, and I can't seem to change that from within Robohelp. I saw some information on Rick Steve's site about customizing window sizes for Webhelp and Flashhelp. I'm hoping there's a similar technique av

  • Timing Settings in LabView

    We have a LabView Program that is set up to start our pump motor and then read data from a pressure transducer.  We also have a program timer to stop the test after 5 seconds.  The program writes to a file what the pressure was at a specific time.  I