Restrict Output for Fax and Print in Sales Order

Hi,
I am having a sales order output with two output types - Fax and Print. I need to restrict one page "Terms & Conditions" to be printed only once when I select the output type as FAX. But if the output type is PRINT, I have to print the page "Terms & Conditions" after every page i.e in even numbers since it is getting printed on both sides of the paper.
Can anyone help me on this.
Thanks in Advance.

Hi,
For pages->Conditions->write condition for ,when it should trigger.
output type eq Printer.
Regards,
Shiva Kumar

Similar Messages

Need Single Billing Document for Materials and Services in Sales Order

Hello Friends,
I am selling FERT items and DIEN items in the Sales Order.
Document flow as follows:
Finished goods - Order-Delivery-Billing
Services - Order-Billing
In this process 2 seperate billing documents are created
i. Delivery Related Billing document for Finished goods.
ii. Order related Billing document for services.
I want to create a single billing document for both the items (FG & Services) in the sales order.
Please suggest.
Thnx.

Sorry for the delay friends.
Somebody suggested me to make services 'relevant for delivery' to ensure single billing document.
What I did were the following steps:
1. Copy Item Category TAD to ZTAD and make is 'relevant foir delivery'
2. Assign Item Category ZTAD to Sales Order type and Item Cat Group 'LEIS'
3. Go to Deliveries Item Categories and through new Entries add ZTAD. Make ZTAD relevant for Picking.
4. Go to copy control 'Order to Delivery' and insert ZTAD in Item Categories relevant for this combination.
Now when I create sales order with materials and services, they pass over to the delivery document and in the Services item, storage location/plant is greyed out. Only the picking quantity is required to be filled.
PROBLEM :
I am not getting the price of Services item in the billing document.
Billing document copies all line items (tangible and intangible) from Delivery Document
It takes the services item details/quantities etc. to VF01 but the price comes '00.00'
Any suggestions.
Is this legally viable? Someone told me its not legally correct.
Thanks.
Mohammed

PO output with mail, fax and print

I have created a PO with message type medium 5 (i.e. External send).
Now I go inside 'Communication method' and I can see communication strategy field, I select EML there (i.e EMAIL, FAX, PRINT).
Now after saving PO is getting mailed and also fax is working, but it is not printing out.
1. Is there any separate settings required for print out?
If I select medium as print out then print is working.
Please advice.
Thanks

Can you please explain more please?
1. Is this possible for PO output?
2. I have Email,Fax and print option, then if email goes then other two will not work?
3.Where the print will come, is this the printer mentioned in the communication method?
4.Where can I get the configuration steps for this?
Please advice.

How to print one sales order output from two printers using single command.

Dear all,
Our requirement is to print single sales order from two different printers, where as one printout for sales order output and another for sales order cash receipt.
We developed two smartforms for both outputs.
But we are struggling to assign the smartforms to single document type, which has to result two printouts after saving the sales order.
Please help us to solve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Hi,
You should define two different output type for your requests, one is for SO output, the other is for SO cash receipt. That's okay!
Good luck
Z.T

Can we combine Query for cancelled requisitions and query for internal requisitions without internal sales order into a single query

Hi All,
Greetings.
I have two queries namely,
1.Query for cancelled requisitions and
2.Query for Internal Requisitions without Internal Sales Orders.
I was on a task to combine those two queries..
Can we do that? if so, please help me do that..
Thanks in Advance,
Bhaskar.

Hi All,
Greetings.
I have two queries namely,
1.Query for cancelled requisitions and
2.Query for Internal Requisitions without Internal Sales Orders.
I was on a task to combine those two queries..
Can we do that? if so, please help me do that..
Thanks in Advance,
Bhaskar.

One number for faxing and for voice

Hi,
I would like to know if it possible to have one number for faxing and for voice.
What I have read up is that Cisco can detect the fax tones. What I would like to do is route all inbound faxes to a viop dial-peer and all voice to another e1 port.
I am just looking for some more info if this can be done.
Thanks you?

Yes this is possible with either cisco fax relay or t.38 fax relay.
http://cisco.com/en/US/tech/tk652/tk777/technologies_configuration_example09186a00800a4adf.shtml
http://cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a00800b5dce.html
Hope this helps...
Chester

Stop printing of Invoice and Payment from Sales Order

When creating a Sales Order, the user can enter a "downpayment' in the Payment Means window. When doing this 8.8 will create an AR Downpayment Invoice + Payment.
When the user prints the Sales Order, SAP/b1 will also print the invoice and the payment.
How can I stop the invoice and payment from printing, but still print the Sales Order?
Thanks!
- terry

Has this question been answered. I can not find a method to prevent these docuemnts from printing as well.

IW31/32- Change Date Restriction choices for "StartPoint" and "End"

Hello,
In IW31/32> Operation tab> then "Dates" screen.
Is there a way to change Date Restriction choices for "StartPoint" and "End."
Start Point: there are 4 choices: Must Start on, Cannot start before, cannot start after, start from resource planning
End: Must finish on, Cannot finish before, finish not later, finish from confirmation.
We want to limit the choice to 2 optiions on Start and End/ in addtion change the text.
Is this possible.
Thanks,

Hi,
No its not possible to accomplish this in standard using configuration functionality.
You may able to accomplish restricting the values on the drop down through the implicit enhancement functionality available in ECC 6.0.
You will have to make a screen modification to make the associated start point/ end point key text editable.
Regards
Narasimhan

Color management for web and print.

Hi there. I would like to post my images and have them print ready for clients. When I read about both of these I find one thing for web and one thing for print. I don't want to edit them twice. What would you suggest for easiest workflow? I like to post the images in an online gallery for my clients and if I really like them maybe use on my homepage. Do I have to edit twice or what is the optimal setting for a photographer. I do mostly portraits --family, baby, couples, etc.
I am pretty well versed in actual editing processes but my understanding in this portion is still lacking. I am trying prophoto rgb on photos today, but will this compromise my online quality?

brwmmw wrote:
…I knew of this option but did not know if it was optimal quality…
You define the quality of the saved image in the Save for Web and Devices dialog box.
brwmmw wrote:
…I have just been… using same files for web and print. I wanted to increase quality across the board in print and web…
That is absurd! (Sorry.) By doing that you are generating unconscionably and unnecessarily large image files. You're clients won't like that.
Remember that you have no control over how anyone sees your images on the web. Something like 97% of Internet users are running non-color-managed web browsers and uncalibrated monitor.
You and you're clients are best served when you stick to the lowest common denominator, namely sRGB images, for web.
brwmmw wrote:
…What mode do you use for prints?…
Personally, I like to stay in 16-bit ProPhoto RGB when I print my images myself. If sending them to a pro lab, I discussed it with the lab techs. But I have gathered a lot of experience by now. One really has to know exactly what one's doing to edit in ProPhoto RGB and stay in that color space. If sending my images to a cheap lab like Costco, I stick to 8-bit tagged images that I soft-proof with the specific printer profile that will be used by the local store.
You should—and probably do—know that ProPhoto RGB has a very wide gamut that includes colors that cannot be printed by many printers, and it's up to you to compensate for that. If you run into problems with ProPhoto RGB consider converting to Adobe RGB for print. Make sure the printer drivers that will be used to print actually support 16-bit printing, otherwise convert to 8-bit.
Since you're a pro, I would warmly recommend you watch the video tutorials comprising the "From Camera to Print - Fine Art Printing" series by Jeff Schewe and Michael Reichmann, that are/were available for download from the Luminous Landscape. They're working on a new 2011 edition, but the 2008 edition was just superb. Best $35 or so I've spent in a long time.
http://www.luminous-landscape.com/videos/camera-print.shtml
Wo Tai Lao Le (no connection to Adobe or Schewe/Reichmnan/Luminous_Landscape.)
我太老了

Function Module for Get Price and Bonus in Sales Order

Hi.. ABAP Guru's..
I wanna make a function for get price and get Bonus for all material items in sales order.
Help me for solving it.. Please.
Thanks a lot before and after.
Rgds,
Asep Saepudin

Hi,
Welcome to SDN.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=7085162&messageID=782207
https://forums.sdn.sap.com/click.jspa?searchID=7085162&messageID=950526
Regards

Hello. I have an iphone5 and I use it for a hotspot for mylaptop and printer. Does any one know a device that will extend its range? I have tried a Netgear and Belkin range extenders without any luck. Thank you!

Hello. I have an iphone5 and I use it for a hotspot for mylaptop and printer. Does any one know a device that will extend its range? I have tried a Netgear and Belkin range extenders without any luck. The Belkin was closest to working. IT could find my iphone but when it create a new network, both the laptop and printer could not find the new extended network. Thank you!

Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

Picklist printing from Sales Order screen with Crystal Report

When attempting to print a Sales Order, we get a dialog box that allows us to choose either Sales Order or Picklist. Prior to moving to a Crystal Report based report, this dialog box would appear each and every time we tried to print the Sales Order. (Our process requires that we print the Sales Order to our Document Warehouse and then separately print the Picklist to a physical printer.) Now that we are using Cyrstal, the dialog box to select the form appears for the first print job, but when we try to print the other form, we no longer get the option to choose which form to print. The second attempt at printing then defaults to which form we printed first.
Under Print Preferences, it appears the box to "Print Picking Sheet" only applies to PLD. Other than closing out of the Sales Order Form and opening it back up again, is there a way to force SAP to allow me to choose which form to print each time I click Print?
And since we're on the topic, Is it possible to set up a print sequence to print the Sales Order to one printer and the Picklist to another one?

Are you on SBO 8.8 yet? If so which patch level?
There is a Print Sequence functionality built into this version (although we don't use it at our company at the moment). 8.8 will also allow you to attach Crystal Reports to any document (with a little work) and they will print just like a PLD document (albeit in a Crystal Viewer).
If you are not on 8.8 yet, how are you pulling up the Crystal Report for the the Sales Order? I'm guessing you are using some add-on to do this since the 2007 Crystal add-on didn't really handle document layouts very well.
I can expand on all of this if you want. But I'll need to know what version/patch level of SBO you are on. My company is on 8.8 PL15.
Brent

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

Difference between Valuated and Non valuated Sale order stock

Hi All,
Can anybody tell me the difference between the above said subject with the steps involved in each scenario.
That is valuated sale order stock and Non valuated sale order stock in Product cost by Sale Order.
With Journal entries at each step and whether any WIP or variances at Production order level and sale order level and all the financial entries related to them
Thanks in Advance,
Ravi Kumar

Hi Shail,
Thans for your inputs,
But I wanted to know it in more detail. In what scenarios they are used with financial entries in both the cases.
I will give you my scenario. It goes like this,
My client is in pipe coating business, who receives pipes from customers and does only coating work(which is considered as service) and despatches it to the customer. this process is carried on the basis of work order(Sale order).
Now Production order is created and work is done on that with reference to Sale order for that particular customer.
So the pipe which my client receives should be non valuated stock as it will not be a raw material to them and the cost incurred on it is booked on production order like chemicals as raw material consumption, activity cost etc.
now in this scenario just tell me how and at which stage FI entries get generated at Production order and Sale order level, and also at wat level Standard cost estimate should be created i,e at production order level or sale order level(sale order cost estimate).
Will there be any entries at goods isssue and GR against production order. If no then how the COGM account will get hit.
Please tell me this scenario in both cases Valuated sale order stock and Non valuated sale order stock with financial entries in Sale order costing.
Thanks & Regards,
Ravi Kumar

Find the user exit while creation and change of sales order

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022     The logic for the user exit to explode should consider the following assumptions and validations
o     Customer master to have the entry at KNVV-KVGR1
o     Material master to have the entry at MVKE
o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A     Quantity / Scale     UoM     Price(£)
     0-10     PAL/TES     20
     11- 20     PAL/TES     10
     21- 30     PAL/TES     5
     31-40     PAL/TES     2.5
     >41     PAL/TES
Product B with Scales mentioned below
Product B     Quantity / Scale     UoM     Price(£)
     0-15     PAL/TES     25
     16-20     PAL/TES     20
     21- 30     PAL/TES     15
     31-40     PAL/TES     10
     > 41     PAL/TES     5
u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022     The expected results should be
o     Product A qty 10 + B qty 15 added = 25Pal
o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Restrict Output for Fax and Print in Sales Order

Similar Messages

Maybe you are looking for