Restrict Posting of Parked Documents - FV75

Hi All,
We have a requirement to allow a User (John Smith) to:
A) Park with FV75
B) NOT Post with FV75
C) Post with F-28, FB70, and other Posting Transactions
Dilemma: If John Smith's role assignments contain the Activity Value which allows F-28 to Post, it also allows FV75 to Post.
Technicality: We have set object F_BKPF_KOA (Authorization for Account Types) to "Do Not Check" for FV75. The Posting Functionality of all FV75, F-28, FB70 ... is now dependent on object F_BKPF_BUK (Authorization for Company Code).
All transactions share this object. For F-28 to Post, the Activity must include 1 (Create) for the relevant Company Code. But, this then allows FV75 to Post to the same Company Code.
We cannot set F_BKPF_BUK to "Do Not Check" for FV75 because of business requirements - however, FYI, doing so for FV75 defaults the program to allow Posting for all Company Codes (which is undesired).
Have you seen this situation before? We would appreciate notes on any form of resolution.
Thanks,
Maggie

You could create a transaction variant for FV75 with transaction SHD0. In this variant you could delete / grey out the posting button (don't forget the menu options as well!). If you search on this forum on SHD0 you will find the appropriate documentation to help you out
If FV75 in general should only be used for parking, not posting, you could assign the new variant as the default variant fot FV75.
If the limited variant should only be assigned to some users, you can create a variant-transacation (e.g. ZFV75) with the new variant and authorize this transaction for John Smith in stead of FV75.
Good luck!
Lodewijk

Similar Messages

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error 'Specify account number' while posting a parked document through FBV0

    Hi,
    I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
    I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

    Hi,
    Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
    Try same scenario in the development its be useful
    Regards,

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • Error F5 702  while trying to  post a parked document in MIRO

    Hi,
    Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
    How to overcome such an error and post this document?
    Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
    Can anyone help?
    Regards,
    Anitha

    Hello Raju,
    Its a invoice which the user posts via a MIRO.
    I can do it with a FM also, U r right.
    There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
    we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
    We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there  has been any exchange rate problems etc...
    Thanks,
    Anitha

  • Posting A Park document of year 2005 in 2007( Error message no. FP 041)

    Hi All
    I have a parked document in year 2005 and know the user want the same to post in 2007. while changing the header(posting date and making as 01.01 2007) through T.code MR44.
    I am getting the following error.
    Changing of document number or fiscal year not possible here
    Message no. FP 041
    Please let me know whether i can post a parked document of 2005 in 2007.
    or any way to rectify the same.
    regards
    Ramesh

    How can we change a parked document's fiscal year?
    I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
    When I use FBV2 to change header information, it shown up an error message:
    Changing of document number or fiscal year not possible here
        Message no. FP041.
    How can I do now?
    Thanks.

  • Error messege BP603 while posting the parked document budget exceeded

    Hi ,
    We are having the budget function and its for overall release.
    Budget has been relased and assigned value is less then the released budget in all conditions.
    Its throwing the error messege No BP603  while posting the parked documents. Unable to understand the reason why its behaving.
    Please let me know if anybody has faced such problem.
    We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
    Regards
    N.Raju

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • How to post a PARK document with Withholding Tax

    Hi All,
    I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
    "Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
    The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
    My entries are :
    29J Vendor a/c  Dr.
    50   XYZ a/c
    If i using F-02 and not parking ;then it is getting posted.
    Note: Line Item is a special G/L Indicator
    Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

    Hi Parag,
    Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
    But,when posting the parked document ,it is asking for Section Code.
    The error message displayed is:
    "Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

  • BAPI_ACC_GL_POSTING_POST is not posting a parked document

    Hi,
    I am trying to post a parked document using BAPI 'BAPI_ACC_GL_POSTING_POST' but its giving an error 'Balance in transaction currency'. I am providing the document number of the parked document in the header data of the BAPI and providing G/L details(Debit) where the document will be posted. The parked document already contains the credit entry i.e. vendor number and the amount of the invoice. So in the BAPI, I am just entering the Debit amount and the G/L. But its giving the error. Has any one posted a parked document using this BAPI or any BAPI. I want do the same thing as we are doing through transaction 'FBV0'.
    Your help will be appreciated.
    Thanks,
    Padman

    - Call transaction SM13 after calling your BAPI, to check if some update tasks are waiting or running.
    - Did you check BAPI BAPI_CASHJOURNALDOC_CREATE ([Note 616804 - FBCJ: BAPI for saving cash journal documents|https://service.sap.com/sap/support/notes/616804])
    - For extension in BAPI accounting, check [Note 487722 - Using EXTENSION1 for accounting BAPIs|https://service.sap.com/sap/support/notes/487722]
    - For general information on ACC BAPI check [Note 306504 - Collective note: BAPIs for the AC interface|https://service.sap.com/sap/support/notes/306504]
    - If data is already in FBCJ, look at FM FCJ_POST_ALL and FCJ_POST.
    Regards,
    Raymond

  • Not able to post a parked document in G/L

    I created a G/L document using FB50. After Simulating it I parked the document. When I try to post the document using FV50, the "Post" tab is not active in the parked document. Can anyone suggest how to post this parked document?
    Regards

    No matter what transaction you use, the Post command will show as greyed out.
    That's simply because to post the parked document, choose the icon "Save as completed" either from the screen icon, or from the top menu (Document --> Save as completed).
    The document will be saved and effectively will be posted. You can then go to FB03 (or any other view txn), and use the same document number to view the posted document.
    Rgds
    Gulshan

  • Reg:how to post the parked documents using BDC

    Duplicate message in General deleted.  Please do not post the same question in more than one forum.
    Hi
    I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
    Please suggest me a solution for this.
    Thanks,
    Satish
    Edited by: Matt on Dec 3, 2008 7:40 PM

    Hi Rob,
    Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction.  Please send the code.
    Thanks,
    Satish

  • Bapi or FM for posting the parked document

    Hi All,
    Can someone suggest for FM or Bapi for posting the parked document??
    Regards,
    Shobana.K

    try this...
    BAPI_ACC_DOCUMENT_POST
    BAPI_ACC_INVOICE_RECEIPT_POST
    BAPI_INCOMINGINVOICE_PARK 
    BAPI_INCOMINGINVOICE_CREATE
    MRM_PARKED_INVOICE_POST

  • Trying to post a parked document but error

    Dear All:
                 I am trying to post a parked document via miro but it displays an error message theat document is blocked for psoting. i have checked but no other user using this document. Moreover the POST button is also disabled. what to do i am stuck.

    Check vendor is blocked for posting or else release blocked invoice document using MRBR.

  • Post the Park Document

    Hi,
    When we post the park document, the following error Message showing.
    No Batch Input data for Screen SAPMF05A 0302
    What is the problem and how to solve this?
    Thanks in advance

    Hello,
    Refer SAP Note 1226243 - Parking the fields BSEG-VERTT, BSEG-VERTN, BSEG-VBEWA
    Regards,
    Ravi

  • Mass Processing (Posting) of Parked Documents

    Is there any some standard functionality to post (in mass) a set of parked documents?
    Regards
    Sreenivas

    Yes indeed!  Execute T Code FBV0, give your selection criteria and execute - in the following screen, you can select all documents and click on save (Ctrl+S) to post all parked documents in the list.  Alternatively, you can use the 'Create Batch Input' option to generate a batch input session and then post it using T Code SM35.

Maybe you are looking for

  • How  can i use this BAPI (BAPI_SYSTEM_MS_GETLIST)

    HI Experts ,                    i am working on ccms Mointoring to fetch data to third party .Trying to get some values from BAPI (BAPI_SYSTEM_MS_GETLIST ) i have provided  External User name = 'xxxxxxx'.  i am getting an error saying that Not logged

  • Importing a list into Purchase order

    Hi, I have a list on purchase order entries (Lines) in EXCEL. I would create PO in EBS and import line data from my excel. Is this possible?. Alternatively, I a have another PO in system that have similar lines as the one I want to create . I was won

  • Manage Orchestration by Web Service

    For handing exception of Orchestration in Biztalk, does it possible to correct the message content and resume the Orchestration by web service or sharepoint outside Biztalk Admin Console? I am using Biztalk 2009 in my project

  • Only have sound for the 2 front speakers in Inspire 5.1 5200

    January 9, 20 I have the Inspire 5.1 5200. Listen music from the web site moov.now.com, only have sound from the 2 front speakers. Would anyone help me to solve this problem Thank you. Regards, Cheung

  • Flash Player question involving Dreamweaver

    After successfully installing the Adobe Flash Player, version 10,3,181,26 on my 32-bit Windows Vista with Internet Explorer 9 (also a 32-bit version), I am still getting this message when I open up any HTML document in my trial version of Dreamweaver