Restrict Qty on Line level to not allow decimal places

Hi All,
I need to restrict the qty on an order at the line level to a whole number. Where exactly is the setup for that.
Thanks in advance.
A/A

Hi Nagamohan..
I am using R12 Vision Instance..I have checked OM Indivisible Check Box..
and its not working....is there any profile for it??
Thank You..
Edited by: tungala on Apr 10, 2009 2:13 PM

Similar Messages

  • JDev 11.1.2 Property Inspector Does Not Allow Decimal Places in StepSize

    All,
    I've experienced this in several applications with this version: I can't type a decimal point (period, fullstop) into the StepSize property for an af:inputNumberSpinbox.
    I can type a value like '0.02" into the source code and it behaves correctly at runtime, but the StepSize property shows as blank.
    Anyone else experience this?
    Thanks,
    Peter

    I had searched the forum before entering this thread and found nothing but it turns out there was a related thread last month (no answer there):
    af:inputNumberSpinbox - Can't enter stepSize = 0.01

  • G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

    Hi,
    G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
    I am creating an independent AP Invoice, there are two issues:
    1. On line level G/L Account field is not open for selection
    2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
         In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
    Need help its urgent.
    Thanks in advance.

    Invoice is Item Type.
    G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
    Issue seems to be on AP side only.
    As required please find attached the screen shots.
    JEwith mapped GL Account on Warehouse
    JEwith different GL Account on line Level via Form Settings
    Thanks & Regards
    Sonil

  • Ever seen this error message? You tried to use HTML or other restricted code. We, currently, do not allow HTML or other types of code in our message board posts or signatures. Try again with simple text only.

    Trying to load this site
    http://southcarolina.247sports.com/
    and it redirects me to this address
    http://media.247sports.com/Oops.html?aspxerrorpath=/
    and gives me the error message. "You tried to use HTML or other restricted code. We, currently, do not allow HTML or other types of code in our message board posts or signatures. Try again with simple text only. "
    Thanks for your help

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Does ppr of hgrid line level does not support dynamic switchers?

    Hi this is really critical.... any help would be highly appreciated.I have a a hgrid which conatains a messagechoice and a switcher in each row.This switcher has two cases dummy message style text and a message choice. depending upon the value of first message choice, in this column messagestyletext or messagechoicebox is shown in switcher. this is implemented by ppr on first drop down. this code works completely fine on jdev. but when deployed on server, the page does not refreshes to show the other component in switcher.I have used transient attribute to populate value of switcher.
    Does ppr of hgrid line level does not support dynamic switchers?
    please help!

    Hi Mukul,
    Have you fixed this issue?
    Iam unable to achieve this row level dynamic switcher.
    In my case .. i should be able to display Edit enabled and Edit disabled icons based on some criteria.I have given E as id for enabled and E1 as id for disabled.when i execute the query it is fine but swither is always populating enabled image.
    What could be wrong?
    Thanks
    Soujanya

  • When banking on-line Mozilla will not allow me to see the details of a transaction while Internet Explorer will allow it. Mozilla was doing it, but now won't.

    I do my on-line banking with Bank of America generally using Mozilla Firefox. Recently I noticed when I clicked on a bank transaction to see the "details" or to print only that specific transaction, it will not allow me to see the details.
    Previously, whenever I clicked on a transaction, to see the image of a check I wrote for example, it always brought up the image of the check. Now, it will not do it.
    If I use Internet Explorer, I can click on a specific bank transaction and see the details, exactly how I used to be able to do it with Mozilla Firefox.
    Therefore, the problem is with Mozilla and not the Bank of America web site, right?

    Problem solved: AdBlock Plus 2.4 needs to be disabled on the BofA site.

  • How to allows decimal place for unit of measure of order confirmation

    Hi Guys
    we have some special cases here that need to confirm the order quantity as decimal place,is that possible made some customizing in code CO11N? or have some ways support it .....
    ex. work order A   10 EA
    - operation 1   : colse 10 EA
    - operation 2   : close 4.5 EA
    Regards/Eric

    Hi,
    You can set a UoM to allow decimals in transaction CUNI. But i fail to understand why you would want to set EA to have decimals.
    If a material is to be managed in decimals then evaluate the usage of a different UoM which allows for decimals.
    Regards,
    Vivek

  • How do I correct % complete to show whole numbers, not two decimal places

    I just installed version P6 6.2 on my laptop and restored a schedule. The percent complete is showing two decimal places for activities less than 100%. What I would like is to have whole percentages, e.i. 84%, not 83.76%. How do I correct this? I thought it would be under the user preferences, but it's not there.
    Edited by: 795589 on Sep 20, 2010 5:46 AM
    Edited by: 795589 on Sep 20, 2010 5:47 AM

    *795589,*
    What particular percent complete are you having trouble with?
    *(Found in the P6 knowledgebase) This issue is an existing Enhancement Request. It will be considered for a future release*
    Other than that, maybe try creating a global change to manually calculate your percents.
    hope this helps,
    +*** Can the number of decimal places for Percent Complete be changed? [ID 895884.1] Modified 30-OCT-2009+

  • While clearing document has more than 999 line items system not allowing

    Hi,
    We have an issue with FI-Customer Clearing. While clearing the error is appearing as document has more than 999 line items. after the detailed checking we found that there are lots of line items posted to Real Exchange Rate diff that to COPA.
    To reduce the maximum line items SAP is suggesting to deactivate the Real exchange rate diff.postings to COPA.
    Regards,
    R.Kumar.

    Hi,
    Please check SAP Note 1353125
    Thanks

  • Well I recently purchased an iPad Mini from the UAE. Now due to the restrictions in the Emirates, FaceTime is not allowed as per law. Now I have moved to Singapore and wish to have FaceTime on my iPad Mini. How do I go about doing this.Please help.

    Help me

    Thank you for your prompt reply. While i agree to your point that it is disabled on UAE iPads I have moved out of there and am settled in Singapore now. So now cant I get it installed.

  • Why is it not allowed to place images in the english wiki?

    Hello,
    in the german wiki I am allowed to upload images as a normal user.
    In the english version I am not. Why is it restricted? I think screenshots are
    a nice way to describe things.
    Or did I miss something?
    Thanks,
    Philip

    karol wrote:
    https://bbs.archlinux.org/viewtopic.php?id=123092
    https://bbs.archlinux.org/viewtopic.php?id=129853
    Edit: Similar question: https://bbs.archlinux.org/viewtopic.php?pid=1074461
    God. I had even posted in one of those. I should just outsource my memory to you karol.
    Closing -- already adequately covered.

  • Host variables in SQL Developer not showing decimal places

    I'm a very newbie, taking my first PL/SQL class, so please be gentle! I think this may be a SQL Developer problem, because when I run the same thing from terminal-line SQLplus on my Linux install, it works right.
    I'm working with a procedure, and passing a value out to a host variable. Although the value should have a decimal portion, when I print the host variable, all that prints is the integer portion.
    Here's the entire program:
    set serveroutput on;
    create or replace package mypkg
    is
      procedure myproc
        (p_in in number,
         p_out out number);
    end;--END package mypkg
    create or replace package body mypkg
    is
      procedure myproc
        (p_in in number,
         p_out out number)
      is
        lv_out_num number(7,2);
      begin
        lv_out_num := p_in / 10.0;
        p_out := lv_out_num;
        dbms_output.put_line('p_out is ' || to_char(p_out,'999.99' ));
      end;--END procedure myproc
    end;--END package body mypkg
    variable myvar number
    execute mypkg.myproc(33,:myvar);
    print :myvarAnd here's the output:
    PACKAGE mypkg compiled
    PACKAGE BODY mypkg compiled
    anonymous block completed
    p_out is    3.30
    MYVAR
    3As you can see, myvar should be 3.3, but it only shows 3. However, like I said above, when I do this from sqlplus from a terminal in linux, it works fine. Thus I'm thinking its a SQL Developer thing.
    Details:
    Machine:
    HP Pavilion dv6 notebook (Core i7) with 8 GB RAM
    Windows side:
    Windows 7 Home Premium SP1
    Oracle 10g Express
    SQL Developer 3.1.06
    Linux side:
    Oracle Linux 5.6 (in Virtualbox)
    Oracle 11g release 1
    Thanks,
    Alex

    Hi,
    This issue has been previously reported on and bugged:
    Re: Oracle Sql Developer prblem with variable format
    Regards,
    Gary

  • Decimal places not allowed

    Hello,
    We have created one materail , their Base unit of measure is "BOX" Checked the CUNI transaction, in that Decimal places  field is "0' and Decimal place rounding filed "0"
    With reff to this material while creation of Purchase order system will allow me to enter Decimal places..Means i can enter 102.132 BOX in qty filed in Purchase order.
    But with ref to same material while creation of process order, system will not allow me to enter decimal places. why?  system should not allow decimal places for BOX unit of measure in Process order.
    sapman man

    you cannot restrict this behaviour with CUNI customizing, you can only check and stop this in a user exit.
    SAP inventory managment allows and stores 3 decimals for any unit of measure. You can only define how it will show the value to the users and how it will round the decimals if it calculates the conversion. But if you enter manually with decimals, then SAP will not round this.
    please read OSS Note 931971 - Decimal places in stocks and stock postings

  • Decimal place is not permitted in activity level

    Hi Experts,
    We have built a project structure with 100+wbs and 600 activities as per business requirement but we need to introduce Decimal value in POC Weight age in activity level, system is throwing error as Decimal place is not permitted, and we need system should allow to enter Decimal value while confirming also.
    These are my observations:
    The domain of the field EVGEW ( POC Weight) decimal is zero
    Note 172410 - Percentages of completion with decimal places (which is old notes)
    Please provide inputs to come out from this issue.

    Hi Guru,
    As far as i feel, there should be some logical reason as to why the system is not allowing decimal places for the POC weightage. If nothing helps, i would suggest you to raise this with SAP and seek their guidance.
    Regards,
    Gokul

  • Error: decimal places not allowed

    Hi,
    I am entering a PO in currency JPY(Japanese Yen).However when I try to enter a PO with net price for one of the items as say 2.71,it gives error decimal places not allowed.
    I have maintained currency rate as 100 local currency=3.1 Yen
    It only gives problem while using this currency.
    What is the way out ?
    Regards,
    manOO

    Hi,
    Check the config of the currency code (OY04), it is probably set to not allow decimal places.
    If this is the case, don't change it, simply enter a price of 271 with a price unit of 100, in the PO. This will give you a price of 2.71 for one
    Steve B

Maybe you are looking for