Restrict Re-approval when promised_date alone is changed

Hi all,
When i change promised_date in the PO form and i save it immediatly the stauts of the PO will become 'Required Reapproval'. I have a request to restrict re-approval on changing teh promised_date alone. I am trying to find out how the Authorization_status (status) changed when I update the promised_date. Is it through the workflow ( i am not sure when the workflow will initiate on commit or on pressing the approval button ) or is there any other program which is updating the status on changing the promise_date.
Thanks in advance.
Expecting your gracious help.
Krishna C

Hi,
Can somebody please tell me where(in which program) and how exactily the update will happen to authorization_status when i change the promised_date.
Thanks in advance
Regards,
Krishna C

Similar Messages

List workflow with "Start workflow when an item is changed" will run twice when creating a new wiki page

I have created the following workflow on the wiki page library to run when an item is changed:-
And it will send emails as follow:-
Currently when a user creates a new wiki page and he enters the wiki page name.
Then he enters the content and click on save.
Then two duplicate emails from the workflow will be sent ? So can anyone advice why creating a new wiki page will fire the workflow twice ?
Thanks

Hi john
Have you see the library where the wiki pages are stored. You can see how many occurrences of the workflow has been run.
Anyway, instead of using "wait for", can we put a condition that says, if Assign To:Approver is not empty. then email.
i use if instead of wait and it worked well, thanks

My Excel with PowerPivots acts weird, it hangs when i try to change font color

Hi
I am facing a weird issue using PowerPivot in my workbook, there is a worksheet named Charts in my workbook and all the charts i am using resides in that worksheet. Whenever i try to change the font color in that sheet, my excel's color palette goes blur
and then everything just freezes and turns black. This problem is happening only with Charts worksheet, when i try to change the color in other sheets, it works just, the problem is only with Charts sheet. File
size is 16 MB, there are just 10 pivot tables with some calculations and some calculated fields. There are no add-ins other than PowerPivot.
Thanks,
Shanker

Hi,
In regarding of the issue, please provide us more information to assist you better.
Do you receive any error message?
Which Excel version are you using? Excel 2013 or other?
Which workbook format are you using? XLS or XLSX?
Are you performing any specific task?
According to your description, this issue seems only occur with the special worksheet "Charts".
Firstly, I recommend we copy all of the content to a new/blank Excel file to test.
If it works fine, this issue might be caused by the "Charts" workbook itself. We'd better check the "Charts" workbook. Or re-build the file with a new workbook.
If it still makes Excel hang with a new file, this issue might due to the content. Please check the content first.
Secondly, we could follow below KB to troubleshoot this issue:
https://support2.microsoft.com/kb/2758592/en-us?wa=wsignin1.0
Thirdly, if the issue still exists, we may try to collect the Event log and App crash dump file to do advanced troubleshooting.
Event log:
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
App crash dump file:
First enable app crash dump collection by copying following words into notepad, saving it as dump.reg and importing
it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\EXCEL.EXE]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Then, open Excel
to repro the issue. If crash issue appeared, please find the crashdump file under c:\.
To further help you, please upload this file into Skydrive and shared the link here.
Also, you can try to analyze dump by yourself if you would like to：
How to analyze app crash dump file:
http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

TS2446 itunes will not take my security answers, and when i try to change them it asks me again and it still wont take it, i cant make any purchases. HELP!

I dont know what to do it wont take my security answers when i answer them correctly, and when i try to change them it askes me for them again and still wont take them, and the worst part is i cant make any purchases. Please help its been going on forever. Btw i just got a new laptop and i synced my iphone with it, and for the First Purchase i have to answer the secutiry questions. See my problem?

  Congratulations on being the next victim of Apple's current SNAFU!  
If you don't have a rescue email address set, then you're SoL.
If you do, then reset your info and check in there.
If not, you'll have to contact iTS, and wait for God knows how long for Apple to complete its pending investigation in this SNAFU.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Text deleting when I try to change color or actual font

I will try to explain. So say I have a photo (or blank canvas) and I have typed words on it. If later I go and double click the word (or layer, etc) so that I can change the color of the word(s) &/or change the actual font, it will just automatically delete the whole word(s) on that layer.... which means I have to go change the color &/or font again BEFORE typing anything, and then re-type it all. So I guess in other words... I guess the text is deleting when I try to change the color or actual font (after it's already typed). Sorry if that's confusing.
(I have a Mac, and I am using the Photoshop that comes with the Creative Cloud subscription).

Something is wrong here, the text should not delete when changing font, color or whatever.
But try this. First off you don't need to double click to change the text atributes.
Just make sure you are on the correct text layer, have commited the text but keep the text tool the active tool. Now in the options bar you can change any or all attributes (color, size, font etc). The text updates real time.
You only need to select word(s) if you want that word to be in another color/font/whatever than the other words of that same text layer.
If you want to change the attributes of more than one text layer in one go then you must select those layers before changing attributes in the options bar.

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Dunning letters generation when customer address is changed

Hi,
For some customers no dunning letters were generated. After investigation inactive bill-to site should be activated as invoices were assigned to this bill-to.
How is possible to make that dunning letters generated when customer address is changed and customer can receive letters to new address for all its invoices?
Any help will be appreciated!
BR, JC

hi
I have created one sales order example X and i created the another sales order Y with respect to X
Is this X sales document is closed????
And I also changed the address of the ship to party in sales document Y.
Did you assgined another SP to sales Document Y
If you have chnaged the address for SP in customer master then it will reflect to both
Also it will not chnage the ADRESS NO in VBPA table, but it will update the address

I have an old Apple ID connected to a discontinued e-mail address. I want to delete it. I cannot remember my password and when I try to change the password using the security questions, it rejects my birth date! I can't change it by cancelled e-mail.

I have an old Apple ID associated with a discontinued e-mail address. It keeps popping up when I try to update apps. I don't remember the password. When I try to change it by security questions, it rejects my birthdate! I can't change it by e-mail because I no longer have access to the e-mail. All I really want to do is cancel this old ID. How can I do this? Obviously, I have a new ID, since I am using this support community.

You'll have to contact iTunes store support to see if they can help you with this: http://www.apple.com/emea/support/itunes/contact.html.

How do I quickly update the ActiveX automation references in my VIs when the ActiveX interface changes?

Hello all,
I joined a test automation team in the middle of a large project and
inherited a huge set of VIs (over 700) and associated architecture for
this automation (not to mention the several thousand TestStand
sequences). Another part of the project is being developed by our
customer, who is using VB 6.0 to create ActiveX components which we
need to use in LabView to access their hardware. They've already
invested a large amount of time developing these ActiveX components,
and they are not finished -- meaning the ActiveX interfaces will be
changing. Every time they send updated ActiveX components, I have to
re-write many, many VIs including updating a couple strict typdefs.
This process takes way too much time and is mind-numbing and prone to
error or omission.
Unfortunately I can't post any of the VIs because of a NDA. But
perhaps a bit more detailed explanation would help. TestStand calls a
VI to open and get an ActiveX reference for automation (which it stores
in a variant). It will pass this reference into any VI it calls to
perform specific functions through this ActiveX interface. For
example, one VI that may be called passes this automation refnum into
another, which passes it to another, which passes it into another to
get the actual ActiveX reference stored in that variant (through a
Variant To Data call with a strict typedef of the ActiveX component
wired to the type input). [See the attached image of this sample VI
hierarchy: the far left icon would represent TestStand, and the far
right is the strict typedef.] Any of the VIs in the chain might use
ActiveX Property or Invoke nodes, and it can break at any one of those
when the ActiveX component changes. It's easy to fix each one, but
since there are so many VIs it takes a very long time.
Is there any way at all to do a massive search/replace or something to
make the ActiveX references update? I realise that even though
property or method names stay the same from one version to the next,
they are different references. Is there a way to update these based on
name if you give it the base ActiveX reference?
Thanks in advance for any help!
Tom Williams
Attachments:
hierarchy.GIF ‏6 KB

Ben,
Unfortunately I can't post any VIs that would demonstrate the problem
because the ActiveX components are confidential. I'll try to develop
my own ActiveX dll that will demonstrate it, but in the meantime, in
hopes that another picture will help, I've attached an image of a block
diagram (with some names changed to protect confidential information)
of one of the lower level VIs from the hierarchy I posted. In this
example, the "Automation Refnum IN" is an input with a type definition
linked to the strict typedef based on the ActiveX automation dll that
has changed. I updated that typedef, but as you can see the output to
the "Class1" indicator is broken. If I delete the "Class1" indicator
and select Create->Indicator from the Class1 property node, and then
wire the new "Class1" indicator to the connector pane, the VI is fixed
-- at least at compile time. In most cases there is also a runtime
problem where the reference obtained by one of the intermediate
property nodes is null, so the property or method node that uses it
fails (e.g. "_VNManager.Networks" property returned is 0, so the
"_Networks.Network1" property node fails). To fix this problem, I have
to delete the wires between the property nodes, and one by one select a
different property/method, then select the correct property/method and
re-wire. There seems to be a bit of "jiggling the handle" to get it to
work though.
I don't know if the ActiveX developer changed anything in this class,
but if he did, he didn't change the name of this class. I would like
to have to modify the VI only if a class, property or method has
changed name or been removed.
Does that all make sense? Thanks for any pointers or help!
Tom
Attachments:
Class1_Path.GIF ‏7 KB

HT1311 I have two Apple IDs, one with all my purchases and info on it. The one with everything on it is under a bad email address. When I tried to change it to my current email, it tells me I already have an account. How do I fix this?

I had an old iPod under an old Apple ID which was stolen. I replaced it with an iPhone and apparently created a new Id under my current email address. When i went to sync the phone to my comuter (several months later), I accidentally restored the phone to my old iPod settings and lost everything. I then continued to make purchases on the phone but didn't realize that it had reverted back to my old Apple ID. This is under an old email that I no longer have access to. When I tried to change the Apple ID/email address in the account settings, it won't let me because it says that there is already an Apple ID under this address. However, all my information (settings, contacts, photos, aps) are under an incorrect email. How can I change the account I have been using to reflect my valid current email address if there is already an existing account (which I never really used) under this address? Please, I don't want to lose all my info again.

Change the email on the old account to another new, current email address.
An email address can only be linked to one Apple ID.
It is possible to have content from multiple Apple ID's on a single iDevice.

Can't get and use an apple id for cloud or apps or store when i try to change it it will let me but then everytime it keeps asking me to chang e password everytime cant get my computer to just accept one password that will keep

can't get and use an apple id for cloud or apps or store when i try to change it it will let me but then everytime it keeps asking me to chang e password everytime cant get my computer to just accept one password that will keep

Just what are you doing and what is the exact wording of the message you are getting?

I forgot the answers for the security questions and when I try to change them (My Apple ID - Manage your account - Password and Security) I'm asked to answer the exact questions I'm Trying to change because I don't remember the answers. How can I do it?

I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?

Can't you try the email option instead?

When I try and change my Apple ID email address to my Me account email, it won't let me. I want to change it so it goes through my Me email. How do I do this?

Hey guys,
So basically as the question above says...
I have had an Apple ID for a few years now under a Hotmail email. Recently I got a Me account and I want to change my primary email address on my Apple ID to this new Me email address as I no longer use the Hotmail email.
However, when I try and change it, it simply states "This domain name is reserved for MobileMe accounts."
Could really use the help, and I thank people in advance for any advice!
Dan

hey i have same issue i was woundering if you got ure fixs and if did how

Restrict Re-approval when promised_date alone is changed

Similar Messages

Maybe you are looking for