Restrict Role visibility in internet scenario

Hi Experts,
We have a external facing portal which is being used by customers and certain internal users (employees). MSS is also being hosted in the same portal. The requirement is that the employee should be able to see the MSS Role only when he accesses the portal through the intranet and not when using the portal through the internet. There is no plan to maintain separate user ID's for the internet and intranet scenario. Is this possible? Any suggestions or ideas?
Thanks and Regards,
Arun E V

Hi,
/irj/portal/internal -> filterID 10
/irj/portal/external -> filterID 20
2 rules, filtering the URL, assigns the correpsonding desktops. The desktop will only show content/roles with the correct filterID assigned.
Should work, but you'll have to deny access to the internal URL for external access. Can be quite complicated if you have users that belong to both groups.
Have you considered dynamic role assignment? There is some example code in the SDN.
br,
Tobias

Similar Messages

  • Restricting the visibility of Dataview

    Hi All,
    Could anyone assist me in restricting the visibility of dataview  for a specific planner in the SDP94 screen.
    The problem is when a planner opens his planning book he is able to see all the data views whereas he has authorization for only one data view.
    How do i ensure that he is able to view only his dataview.
    I have tried the assign planners to planing book option but i cannot assign more than one.
    Thanks in advance.
    Regards,
    Raj

    Using the authorization object C_APO_PB, i'm able to restrict the view only for planning books but not the dataviews. i have used the following auth objects:
    C_APO_PB : SDP planning books
    ACTVT Activity (01, 02, 03, 06, 16)
    APO_PLBK2 Planning book
    APO_DVIEW Data view
    In our scenario, we have 3 planning books and each planning book has 20 datviews and i have assigned a single dataview from each planning book for a specific user using the above authorization objects. Even after maintaining the authorization for only one dataview for a particular user, i'm able to see all the dataviews in the SDP94 screen. How can I restrict the visibility of dataviews.
    Regards,
    Raj

  • Restrict the visibility of a field  in the table

    There is a field in master database (pa0002) ,  i dont know from how many ways the  field value can be seen  like transaction, table view or abap query, but the requirement is the restrict the visibility of the value of the field to specific user , so please suggest me any peoper solution.
    Screen field: Q0002-BSNCD / Table field: PA0002-PERID
    Only authorized users are be able to see the BSN number.
    Other users should not have access to the BSN number in any way. I.e., access to the BSN number via the IT0002 screen, queries, table view or other ways should be prohibited when not authorized.

    Hi,
       Can you try creating an authorisation object and including an authority check in the PBO.
    Regards,
    Sonal

  • We have to restrict the visibility of Questions based upon technical and co

    We have to restrict the visibility of Questions based upon technical and commercial. For example if there are two section commercial and technical, technical team should not be able to see commercial questions and vice-versa

    Hi
    I could suggest an alternative approach. You  take a call whether it suits your business process
    Create a project for the event. Within project you can create two seperate Rfx one with technical team as collaborator and the other with Commercial team. Two Rfx would be evaluated and awarded seperately by respective team. You can take help of your technical expert to create custom report for overall evaluation
    Regards
    Mudit Saini

  • HT3819 what is the role of the internet connection in home sharing. is home sharing using up my limited internet download allowance.n

    What is the role of the internet in using Home Sharing. Does using home sharing use up my limited amount of available internet download ?
    Thanks Mike Anderson

    Home sharing allows you to play music across devices via wifi, so it shouldn't impact your limited amount. Think of it as streaming as opposed to downloading.

  • Survey - internet scenario

    Hi experts,
    how can i use the Survey Suite for an Internet scenario??? in help.sap.com the following is stated:
    You can do this by downloading the required HTML survey to your PC. From here, you have two options:
    *Copy the HTML survey into any Web site
    *Send HTML survey attached to an e-mail
    The corresponding options for having the results sent back is http(s).
    i am lookign more on the marketing side.
    how is this done?
    all i know is that for the get/send options is i have to choose https. but i can't choose any files since there aren't any. does any one happen to have those XML files?

    http and https are either unsecure or secure methods of transmission of the survey data via the internet, basically.
    We have been using BSP with anonymous login for internally run surveys to learn some of the basic Survey/Campaign functionalities, but have yet to do much researching on the http/https options. 
    From what I had found so far, there needs to be an external CAT server in place.  I have not yet determined how the ConnectorID functions within this yet.

  • Internet scenario - survey suite

    Hello all,
    i am new to crm marketing. I was wondering if anyone has done an internet scenario for the survey suite.
    I have already created the survey but I just do not know how i can implement this in an internet scenario.
    When i try to generate an URL for the survey, I selected http option, but the get/send options return empty dropdown fields. From further reseach, i found out that it was due to wrongly defined XML parameters. But still get an error msg saying that the "ConnectorID not (yet) defined.
    I then did further research and found that I need to install a survey servlet and I installed the survey servlet but in the end, I still get the error message "ConnectorID not (yet) defined".
    Does anyone know what else I need to do or if I;missing any steps?
    p/s: We are currently using CRM 5.0. Amd I have exhausted all resources. Would greatly appreciate for pointers/guidance

    Hi Lee,
    I have successfully created and triggered the survey as part of one of campaign execution. The survey URL is seen in the delivered mail and also I am able to create a activity for the response of the survey. It also should work in your scenario.
    Just follow the best practice document C22 step by step and you should be able to trigger survey successfully.
    Let me know, if you have any difficulties.
    <b>Do not forget to reward if it helps,</b>
    Regards,
    Paul Kondaveeti

  • Restricted Portal Login through internet

    Hi,
    Is it possible to restrict portal login through internet for certain group of users of portal. These users, who are LDAP users, need to login to the portal from intranet only
    regards,
    Sujesh

    Yes, you will have to develop a JAAS login module to develop this functionality of restricting portal access for specific groups.
    Let me know if you need more information.
    Vibhu

  • Restricting owa 2013 from internet for group users using ARR

    I am trying to restrict owa access from internet for group of users using ARR.
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/mobility-client-access/iis-application-request-routing-part1.html
    please suggest

    Hello,
    Thank you for your question.
    This is a quick note to let you know that I am trying to involve someone familiar with this topic to further look at this issue.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Restricting the Visibility of FireFighter Roles to selcted users

    Dear Experts,
    Is there any way to restrict the visibiilty of FireFigher roles in GRC CUP to only few authorized users. we have a requirement where a group of authorized users should be able to check out fire fighter roles on their own and these roles should be provisioned automatically to these users and then de-provision those roels after some time.  These  rolese should not be visible to the rest of the users.
    Any throughts on this would be greatly appreciated.
    Thanks
    Kumar

    Kumar,
      There is no straightforward or right way to do this as this feature is not available in CUP.
    You can associate those users with a functional area and restrict the role selection by functional area. Also, associate the roles with the same functional area. Again, this is not going to force users unless you bring functional area from the data source like LDAP and keep the field non-editable.
    Regards,
    Alpesh

  • Restricting Data Visibility by scenario owners

    I know security filters can make measures read-only for a particular user.
    What is the best practice to restrict a user or subset of users to be able to see one part of an application, but not another part of the application (example: US Planners wish to see the US list, or a subset of the US list, but do not wish to see the data for EMEA or APAC). Is this best controlled with multiple cubes, or is there some form of security or other feature to keep the users or scenario owners from seeing the other areas data?
    Thank you.

    Security filters can be defined down to a cell level, and the available authorization settings are no-access, read-only, and read-write. So if you set the US planners access to EMEA data to no-access, they cannot see any measure data associated with the EMEA part of the dimension.
    Does that address the needs?

  • OIM 11g R1 - Restrict Role assignment

    Hello,
    is it possible, if a user have a special role, that no other roles can be assigned?
    For example:
    User1 have the role "Restricted" assigned. No other roles can be assigned to that users. Either SYS ADMIN cannot assign other roles.
    Only after this role was revoked from the user, other roles can be assigned again.
    Is it possible to handle this scenario by an eventhandler?
    Edited by: 960944 on May 6, 2013 7:58 AM

    I don't know if you can prevent, but i am pretty sure you can immediately fix. You can create an event handler like this:
    <action-handler class="com.client.code.eventhandler.RoleUserProcessor" entity-type="RoleUser" operation="CREATE" name="RoleUserProcessor" stage="postprocess" order="1000" sync="TRUE"/>
    This is just a sample event handler that i've used before that did a check any time a member became a member of a role to perform a certain action. You could do some testing on the operation type, and the stage if you want. But it is possible for you to know anytime a user is added to this role, and anytime a user is added to a different role to check if they are a member of this role you mention. If they are a member, use the APIs to remove them from any others. If they get added to a new role, immediately remove them.
    So yes, it is possible, and perhaps this can give you a start at some testing.
    -Kevin

  • Help unable to install OS X as hard drive not visible in internet recovery mode

    Hi
    I have a MacBook Pro
    During use my screen froze and I had to force quit. Since then I have tried the following:
    Turning on in safe mode
    Internet recovery - no mac hd or partition recovery drive are visible in disk utility only OS X base system
    Unable to install maverick as there's no disc visible to select
    If I try to verify the start up disc is greyed out
    Starting up with cmd r
    Tried to reset PRAM
    Start up disc does not display anything
    ALL TO NO AVAIL, is the hard drive defunct or is there anything else I can try ?
    Many thanks for your help
    Elie

    See this thread, this is 3rd regarding recovery/restore - as a starting point.
    Obviously it is easier if you have a couple backups, a drive you can use, and don't mind erasing the internal drive.
    It is a lot easier then. And it would be easier if you didn't have a notebook. This forum is not MacBook Pro but the tower or workstation.
    https://discussions.apple.com/message/25145113?tstart=0#25145113

  • Tab Not Visible in Internet Explorer 10

    Hi,
    We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
    Thanks
    Sudhir

    Sudhir,
    The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
    But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
    But please see {thread:id=2519792} for some ideas.
    Good luck,
    Howard

  • WRV210 Administration pages not visible in Internet Explorer

    I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages.  An image of the Status Router page is inserted below.   I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
    I haven't run across any other entries like on this or other sites.  Are there any known solutions to this?

    I have a WRV210 at a client site, and after upgrading to firmware 2.0.1.5 I've noticed the same behaviour.  Upon inspection of the HTML I notive the right-pane-content area contains a
    element right before the form begins.  This tag was intended to hold a background image/style for the content area, probably white or at least some colour other than the already blue page background.  It has a defined width and height of 1000px * 2622px;  If I remove the and re-render the page, the form displays at the top.  So it seems this was supposed to encompass the form, but instead because it self-terminates, precedes it with a vacant space 2622px high;  It seems then that this is indeed a bug, in many pages.
    I've also noticed that the web server on this router is annoyingly slow, though I can't remember if it's any slower than the previous firmware revision.  I, like many, purchase Cisco products for the promise of higher quality, greater stability, and better support/documentation/community than other competing manufacturers.  Sometimes you win....

Maybe you are looking for

  • Cannot get Flash Player to work

    Flash Player 11.6.602.180 keeps stopping. Everytime I try to use it I get the "has stopped working" message. I have un-insalled and re-installed several times with no positive result. It is very frustrating.

  • Open SC item wise list for a particular user.

    Hi All How can i find what are the OPEN shopping carts items are existing in the system for a paticular user. i wanted to know what are the sc line items are still opening for PO,GR only. user created a Shopping card and user was deleted by the BASIS

  • Illustrator CC Free Transform not Snapping to Guides, No Smart Guides

    The Free Transform tool in Illustrator CC won't snap to Guides, and Smart Guides don't seem to work either. I have all the options checked in Preferences > Smart Guides > Display Options and the Snapping Tolerance turned way up. In CS6, Free Transfor

  • How do I re-arrange the tabs on the foxtab display?

    I put sites into the favorites but later want to re-arrange the tabs.

  • Line number in a stored procedure

    Hello All, In a stored procedure, as a part of logging the debugging information, I want to store the current line number in a variable (say line_number) and return it from the stored procedure as a output paramater. I would like to update line_numbe