Restrict size of payload for OSB Proxy

Hi,
I have a requirement where I need to restrict the size of payload my OSB Proxy should accept. Example anything > 1 MB should not be accepted.
I know there we can set the HTTP " Max Post Size" in weblogic but that would be at Domain level . I would like to set this at individual Proxy level.
Appreciate any help or pointers.
- Sam.

You cant change it outside the Proxy code and only at Proxy level. Either change it globally or if you want to do it at Proxy Level then validate it within Proxy Code.
If you still want to do it outside the Proxy Code and only at proxy level then you can expand HTTP transport using OSB transport SDK to a custom transport which has a limitation on message size as desired, not a valid use case for designing a custom transport but it will fulfill the requirement if that's all what you care about.

Similar Messages

Dynamic timeout for OSB proxy or business services

The scenario we got here is that we will have multiple synchronous webservices implemented as OSB proxy services. These proxies will then invoke a common "routing" proxy that will determine which other OSB proxy or business services (JMS Request/Response) to call and does the dynamic routing.
I understand that you can set a timeout at the business service level how long to wait for a response (at least when using the JMS transport). The problem is we got the requirement that the timeout value would be dependent on the role of the caller invoking the frontend webservice (this is done via some kind of lookup to determine the appropriate timeout setting for the invocation).
Is this possible? I can't seem to find anything exposed in the transport header that allows me to set a timeout value during runtime. This means that the frontend proxy will be waiting for a response depending on the business service timeout setting. Can we implement a timeout in this frontend proxy somehow?
Stumped right now over this. Thanks in advance for helping out.

>
Are there other reasons why you say it's not the most ideal way of development ?
>
Versioning binary files is always a pain. You can't compare them, you can't merge them ... Another point, if you put your jar archive with OSB artifacts under version control, you will most probably face issue related to end of line styles (mac, unix, windows).
However, the most important point is usability. I want to version .proxy and .biz services to see right in IDE that I changed something and I should check that in for the others. I don't want to risk that I forget something. And I also want to see what other users committed, what sources they work on ... You loose all of that by versioning jar file. I would never go this way.

Java client for OSB proxy with JMS Transport

Hi,
I am trying to call OSB proxy with JMS Transport. I am generating the client through ant task clientgen and following this article
http://www.oracle.com/technetwork/articles/murphy-soa-jms-092653.html
The osb proxy is req-response and is simply routing to BS which return a string value.
When I run my client, it get stuck and does not return at all. Has any one trying java client in such scenario?
What I may be missing?
Below is snipped of client code:
String url = "http://localhost:7021/sbresource?PROXY/MySample/MyJMSProxyService";
CreditLoanApprovalServiceSoapBindingQSService service = new CreditLoanApprovalServiceSoapBindingQSService_Impl(url);
MyPortType port = service.getCreditLoanApprovalServiceSoapBindingQSPort();
LoanStruct in = new LoanStruct(); //populated the data structure
String loanResult = port.processLoanApp(in); // Stuck here without any error
System.out.println("LoanResult--> " + loanResult);
Thx
/Ashwani

http://localhost:7021/sbresource?PROXY/MySample/MyJMSProxyService is the WSDL URL of the proxy.
Transport is is picked by the client from wsdl.
As far as the documentation of client generation is there, there is no change.
But meanwhile I have started working on sending the message directly to queue. JMSProxy is getting called. May be I will first run the proxy this way and then try troubleshooting the java client.
Regards
Ashwani

Version Control for OSB Proxy/Business Services ?

Dear all
I've used the browser-based osb console to expose a legacy web-service as follows :
1. Create a Session
2. Create a BusinessService based on the legacy web-service WSDL
3. Create a ProxyService based on the BusinessService WSDL
4. Activate the Session
I now have two further questions :
1. How do we version control the OSB "code" ? (we use Subversion for other code)
2. How do we implement it in other environments (TEST, PROD, etc.)
Thanks,
Peter.

>
Are there other reasons why you say it's not the most ideal way of development ?
>
Versioning binary files is always a pain. You can't compare them, you can't merge them ... Another point, if you put your jar archive with OSB artifacts under version control, you will most probably face issue related to end of line styles (mac, unix, windows).
However, the most important point is usability. I want to version .proxy and .biz services to see right in IDE that I changed something and I should check that in for the others. I don't want to risk that I forget something. And I also want to see what other users committed, what sources they work on ... You loose all of that by versioning jar file. I would never go this way.

How to restrict acess to a single user for a proxy service in OSB

how to restrict acess to a single user for a proxy service in OSB

A.     Go to Proxy Service and Click on the Security tab
B.     Click on Transport Acess Control Policies to Edit.
C.     Click on Add Conditions to Restrict the users.
D.     In the Predicate List Select the User Category
E.     Give the User Name to which you want to give access.

OSB & WLST: changing operational settings for a proxy service via WLST

Hi all,
we are trying to change the operational settings for a proxy service via WLST.
In details we would like to change the "Logs" level (Monitoring section).
We have a lot of deployed services and our 'deployer people' need an automatic way (via WLST for example) for doing that instead of using the OSB console.
Thanks in advance
ferp

Hi,
OSB is the Oracle Service Bus. Oracle Service Bus is a configuration-based, policy-driven enterprise service bus.
The OSB is deployed into an Oracle WebLogic Server instance.
OSB uses also WLST functionality provided by WebLogic Server.
Best regards
ferp

OWSM user name token service policy for a proxy service at OSB

Hi Friends,
I am facing an issue while trying for the OWSM user name token service policy Authentication for a proxy service at OSB. I am using the PS4 SOA suite with AIA foundation pack. very first I am login into the EM console and choose the domain<soaosb_domain> form web logic domain I moved to security->security provide configuration. Inside the security provide configuration we have to key store section and I expand that and we have a configure button inside the keys tore. I click that button and it open a new page. In that page I got the Java key store (JKS) as the default key store and in the access Attributes I keep the default key store path and fill password and confirm password fields. Then in Identity certificates I fill the signature key and Encryption key with key Alias as 'orakey' and same password which I am mentioned at access Attributes. I got the message like the key store is created successfully. Then I restarted the server and again I am login into the EM console and choose the domain<soaosb_domain> form web logic domain I moved to security. In security I choose the credentials. In credentials we have create key. In the create key I add the key as hari-key and provide the hari as a user and his password.
While trying to test the proxy service i am getting the [OSB Security - OWSM: 387253] Failed to initialize OWSM Credential Manager. Please validate the Key store Configuration.
can anyone please look at this and suggest me how can I proceed for this.
Thanks
Hari

anyone please respond to the above request.
Thanks
Hari

Extracting MIME attachment from email using OSB proxy service - email transport

Hi,
I'm reading email messages(multipart/mixed) with attachments(pdf, zip, xml and csv) from MS Exchange Server 2010 using OSB proxy service email transport.I need to save the attachments to a local folder and process one of the attachments, an XML file. Below is the proxy service config.
Proxy Service Configuration (Test1/Proxy Services/GetEmail)
Actions:
General Configuration
Service Type   Messaging Service
Message Type Configuration
Request Message Type
Text
Response Message Type
None
Transport Configuration
Protocol   email
Endpoint URI   mailfrom:mailserver.net:143
Get All Headers   No
Headers
EMAIL Transport Configuration
Email Protocol   imap
Service Account   Test1/Proxy Services/email_acc
Managed Server   WLS_OSB1
Polling Interval   30
Read Limit   2
Pass By Reference   false
Pass Attachments By Reference   false
Post Read Action   move
IMAP Move Folder   processed
Attachments   archive
Download Directory   \\soasup-stor01\Vacancy\test\download
Archive Directory   \\soasup-stor01\Vacancy\test\archive
Error Directory   \\soasup-stor01\Vacancy\test\error
Request Encoding   iso-8859-1
Message Handling Configuration
Transaction Required   Disabled
Same Transaction For Response   Disabled
Content Streaming   Disabled
The polling is working fine. I've encoded the attachment variable to Base64 using a java callout.$attachments/ctx:attachment/ctx:body/ctx:binary-content has been passed as the byte[] input to the java method and the response is captured in $encodedAttachment. I've created a SaveFile BS(file type) with Request Message Type = Binary and Response Message Type = None. I've tried replacing the node ./ctx:binary-content in body variable with encodedAttachment in the request action of the Publish action to call the BS. One file is getting created with contents of the entire email, MIME headers and boundary parts along with the base64 encoded attachments.
<Contents from the created file>
MIME-Version: 1.0
Content-Type: multipart/related; boundary=MIME_Boundary;
type="binary/octet-stream"
--MIME_Boundary
Content-Type: binary/octet-stream
Content-Transfer-Encoding: 8bit
Thanks & Regards,
Samyajit Talukdar
: [email protected]
-----Original Message-----
From: Samyajit Talukdar
Sent: 10 April 2015 14:11
To: MS MLRP Returns
Subject: FW: 22222
Thanks & Regards,
Samyajit Talukdar
: [email protected]
--MIME_Boundary
Content-Type: application/vnd.ms-excel; name="soainfra_v$session.xls"
Content-Transfer-Encoding: base64
Content-Description: soainfra_v$session.xls
Content-Disposition: attachment; filename="soainfra_v$session.xls";
size=25618; creation-date="Thu, 27 Nov 2014 09:56:35 GMT";
modification-date="Fri, 10 Apr 2015 09:28:23 GMT"
0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAABAAAAAQAAAAAAAAAA
EAAAJgAAAAEAAAD+////AAAAAAAAAAD/////////////////////////////////////////////
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAA=
--MIME_Boundary--
If I put a delete action in the request to Publish action for SaveFile BS to delete the $attachments, the created file contains only the email body part and the attachment boundary part is missing.
I've uploaded the OSB log with full trace enabled.
How can I pass the encodedAttachment to the BS for saving the files?
Would iterating through the $aatachment/ctx:attachment give me the individual attachments for saving and processing, as there are separate binary-content refs in them?
Any help to achieve my requirement is highly appreciated.
Thanks in advance.

Hi Manoj,
Thanks for the quick reply to my query.
The thing is, the link you have provided talks more from changing the business Service configurations i.e. the type of the service etc, but the concern is, that the Business Service is already Implemented and hence the change would not be an appropriate option for me.
Please let me know, if any more information is required.
Thanks & Regards,
Anu

Need Help:Handling CLOB in OSB Proxy Service

Hello All-
We have created an AQ in Oracle DB which will have the following message Structure:
CREATE OR REPLACE TYPE enqueue_payload AS OBJECT
( field1 VARCHAR2(100),
field2 VARCHAR2(100),
field3 DATE,
field4 VARCHAR2(100),
field5 NUMBER,
payload CLOB,
In the Payload field we are enqueing an XML message.
We have to use a OSB proxy service to dequeue the message from the AQ, transform it to another format and send to a SOA Composite.
We created a AQ Adapter in Jdeveloper 11g and imported the WSDL, XSD and .jca jca binding file into the OSB project. And configured the OSB proxy service using the WSDL imported.
However in OSB proxy service message flow when I try to create an XQUERY transformation, I see that the Payload field does not expose the structure of the XML message that is being enqueued. I even changed the message structure definition to have the payload field as XMLType. But it didn't help.
On analyzing the XSD created by AQ Adapter, I see that the payload is being defined as "string" in the XSD.
Inputs Needed
=========
1. How can we parse the payload field defined as CLOB/XMLType in OSB so that I can see the structure of the XML message it holds ?
2. Is there any in-built function in OSB to convert it to XML ?
3. Any other inputs in order to transform the XML message coming in the payload field as CLOB/XMLType
Please provide your inputs and I hope that I have clearly explained my use case.
Thanks in advance for your time and help!!
Regards,
Dibya

Hi Atheek-
Please find the logs below:
Payload:: Indicates the actual payload with all the headers fields coming from AQ
Payload After Applying the Function:: Indicates the data that is logged after applying the fn-bea:inlinedXML function.
The function fn-bea:inlinedXML is extracting the data from the XML tags :(
####<Dec 20, 2010 12:14:26 PM GMT+05:30> <Info> <ALSB Logging> <vhydaiavm-03> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-000A464703C2C06A4338> <6751713a0ce9f61d:-6e70b631:12d02855fef:-7ff4-0000000000000002> <1292827466595> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, stage1, REQUEST] Payload:: <apps:ORA_FUSION_LOAD_XMLTYPE xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:apps="http://xmlns.oracle.com/xdb/APPS">
*<RICE_ID>PRJ_INT_30</RICE_ID>*
*<SOURCE_SYSTEM>ORACLE</SOURCE_SYSTEM>*
*<DATETIME>2010-12-20T10:49:17.000Z</DATETIME>*
*<TRANSACTION_ID>PRJ_INT_30-1</TRANSACTION_ID>*
*<RECORD_COUNT>1</RECORD_COUNT>*
*<PAYLOAD><![CDATA[<ALTPPSEGHIERARCHY><sgmt_name>Company</sgmt_name><include_parent_child>C</include_parent_child><parent_flex_value>P</parent_flex_value><child_flex_value_low>03</child_flex_value_low><child_flex_value_high>03</child_flex_value_high><start_date_active></start_date_active><end_date_active></end_date_active></ALTPPSEGHIERARCHY>]]></PAYLOAD>*
*<ATTRIBUTE1 NULL="TRUE"/>*
*<ATTRIBUTE2 NULL="TRUE"/>*
*<ATTRIBUTE3 NULL="TRUE"/>*
*<ATTRIBUTE4 NULL="TRUE"/>*
*<ATTRIBUTE5 NULL="TRUE"/>*
*</apps:ORA_FUSION_LOAD_XMLTYPE>>*
####<Dec 20, 2010 12:14:26 PM GMT+05:30> <Info> <ALSB Logging> <vhydaiavm-03> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-000A464703C2C06A4338> <6751713a0ce9f61d:-6e70b631:12d02855fef:-7ff4-0000000000000002> <1292827466595> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, stage1, REQUEST] Payload After Applying the Function:: PRJ_INT_30ORACLE2010-12-20T10:49:17.000ZPRJ_INT_30-11>
####<Dec 20, 2010 12:14:26 PM GMT+05:30> <Info> <JDBC> <vhydaiavm-03> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6751713a0ce9f61d:-6e70b631:12d02855fef:-7ff4-0000000000000002> <1292827466688> <BEA-001128> <Connection for pool "EBS_DHAARA_DataSource" closed.>

XQuery Mapper for OSB 11g

All,
We have a task of transforming lot of XML payload formats as part of the OSB proxy service to business service calling. I am looking at this link for XQuery Mapper
http://download.oracle.com/docs/html/E15866_01/mapper.htm#i1385064
I have downloaded the Oracle Enterprise pack for Eclipse but still don't see XQuery Transformation option.
The documentation in this link talks about GUI based intuitive mapping mechanism b/w different SOAP or XML or WSDL formats.
Let me know your thoughts on the same.
Thanks,

Hi Sushant,
Regarding your last post..
As per as I know you can have two option..
1>either you import your wsdl/schemas into OSB Console and then use XQuert mapper over there,you will get the Xquery file.
2>Other wise you can install other XML processor tool(like Altova XML Spy ..etc.) and generate your required XQuery file and then import into your OSB project(@OSB Console).
But one thing I can assure you that what ever you can do in Workshop IDE,you can do same thing in OSB Console as well.
Thanks,
Deba

Error while calling secured OSB proxy from BPEL

Hi,
I have a OSB Proxy service to which I have applied OWSM Policy:
oracle/wss_username_token_service_policy
In the Setting:
Process WS-Security Header is set to Yes
While calling this Proxy from BPEL I tried to append binding properties, I tried the following options:
option1:
wsseHeaders=credentials
wssePassword=welcome1
wsseUsername=weblogic
option2:
oracle.webservices.auth.password=welcome1
oracle.webservices.auth.username=weblogic
But neither of them work and I get the following error:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386200</con:errorCode>
<con:reason>General web service security error</con:reason>
<con:location>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
<Sep 21, 2010 9:49:30 AM PDT> <Error> <OSB Security> <BEA-387022> <An error ocur
red during web service security inbound request processing [error-code: Security
HeaderUnmarshallingError, message-id: 3659922647318344420--645cdd1d.12b2fe0c158.
-7e45, proxy: OSBTest/Proxy Services/PrivatePersonnelDB_PS, operation: null]
--- Error message:
oracle.wsm.security.SecurityException: WSM-00069 : The security header is missin
g.
at oracle.wsm.security.policy.scenario.processor.UsernameTokenProcessor.
verify(UsernameTokenProcessor.java:218)
at oracle.wsm.security.policy.scenario.executor.WssUsernameTokenScenario
Executor.receiveRequest(WssUsernameTokenScenarioExecutor.java:123)
at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor
.execute(SecurityScenarioExecutor.java:530)
at oracle.wsm.policyengine.impl.runtime.AssertionExecutor.execute(Assert
ionExecutor.java:41)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.executeS
impleAssertion(WSPolicyRuntimeExecutor.java:608)
Truncated. see log file for complete stacktrace
I have even tried to enable HTTP basic Authentication for the service, but did not work.
Any help is highly appreciated.
Thanks.

Hi,
I have applied oracle/wss_username_token_service_policy for my proxy service and trying to test that from OSB Test Console. I am getting below error,
"[OSB Security - OWSM:387253]Failed to initialize Owsm Credential Manager. Please validate the Keystore Configuration"
When i have launched Test Console for this proxy, i have observed in Security part, oracle/wss_username_token_client_policy is appearing. I am not sure why oracle/wss_username_token_client_policy is appearing there when i applied oracle/wss_username_token_service_policy to my proxy service.
Also do i have to need to configure any Keystore for oracle/wss_username_token_service_policy, If so please tell me the process.
If no key store is required where will the credentials be stored.
Thanks
Rajesh

Could not create/access the TopLink Session.While invoking OSB proxy.

Hi,
While testing an OSB proxy ,which uses a multi datasource to connect to a remote database, from the sbconsole.I am getting exceptions and it is not able to create/access the TopLink Session.
I have checked the multi datasource jndi name ,which is correct.
The stack trace which I am getting while invoking the service is posted below:
oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/CRN_CommonServices/SaveTransactionBSV2 [ SaveTransactionBSV2_ptt::SaveTransactionBSV2(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SaveTransactionBSV2' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
; nested exception is:
JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:225)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundBindingServiceImpl.invoke(JCATransportOutboundBindingServiceImpl.java:136)
at com.bea.wli.sb.transports.jca.JCAOutboundMessageContext.sendRequestResponse(JCAOutboundMessageContext.java:152)
at com.bea.wli.sb.transports.jca.JCAOutboundMessageContext.send(JCAOutboundMessageContext.java:113)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:464)
at sun.reflect.GeneratedMethodAccessor249.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
at $Proxy76.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:543)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:478)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:544)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:422)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:583)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatchSync(PipelineContextImpl.java:466)
at stages.transform.runtime.WsCalloutRuntimeStep$WsCalloutDispatcher.dispatch(WsCalloutRuntimeStep.java:1401)
at stages.transform.runtime.WsCalloutRuntimeStep.processMessage(WsCalloutRuntimeStep.java:236)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
at com.bea.wli.sb.stages.impl.SequenceRuntimeStep.processMessage(SequenceRuntimeStep.java:33)
at com.bea.wli.sb.pipeline.PipelineStage.processMessage(PipelineStage.java:84)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Pipeline.processMessage(Pipeline.java:141)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.PipelineNode.doRequest(PipelineNode.java:55)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:191)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:75)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:263)
at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:68)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:125)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:123)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:128)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:441)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:169)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:136)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:572)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/CRN_CommonServices/SaveTransactionBSV2 [ SaveTransactionBSV2_ptt::SaveTransactionBSV2(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SaveTransactionBSV2' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
; nested exception is:
JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:619)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:331)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:220)
... 57 more
Caused by: JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:473)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:216)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:638)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:457)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:1001)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:232)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:463)
... 59 more
Caused by: javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.db.exceptions.DBResourceException.missingPropertyException(DBResourceException.java:348)
at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:932)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:413)
... 64 more
Looking forward for your help.
Thanks a lot in advance.
Sumit

Have you created XA data source? If yes then make sure that in connection factory you are assigning the JNDI name of data-source in XAdataSource property (NOT in datasource property). Also make sure that your datasource is up and running and you are updating the dbadapter after creating connection factory.
Regards,
Anuj

Can OSB proxy and business service act as a stub ?

Hi all,
would like to enquire whether I can achieve the following. I have a web service consumer. Can the consumer call a OSB proxy service and within the proxy service, I use XQuery and extract the body and perform some transformation. And the proxy service return variables to the consumer? Without calling any business proxy in the process
Can the proxy service act as a stub? Would I need a dummy business service for it?
Or my objective cannot be achieved in OSB?
Appreciate any thoughts.

Hi,
Assuming the incoming body contains "name: Peter, age: 13". Can the return information contain "name:Peter, age:13, Status: N"Yes, it's possible too, in your Response XQuery Transformation u can add n number of additional fields, and send back to requester.
You can do both Translations and Transformations.
Can I also configure the proxy service not to call any business service?Have you made/generated your proxy service from existing Business Service?
If yes,: then your message flow would have only Route Node ( routing to Business Service).
1. To do transformations on request add a Pipeline Pair in message flow and inside it add stage for doing XQuery transformations.
2. Use Reply Action in stage as last Actions and do reply with Success.( The message flow won't go to Route actions after this ).
IF No : Then either remove the OSB Action which is being used to call Business Service.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Regards,
Abhinav Gupta
Edited by: Abhinav on Mar 8, 2013 3:27 PM

XSLT transformation in OSB Proxy Service

Hello, I am trying to modify the answer from a WebService using an XSLT transformation in an OSB Proxy Service, but I am unable to do so. Here it is the content of the answer's body it receives:
<ns0:getRecountUnitMovementsResponse xmlns:ns0="http://www.grifols.com/gds/interfaces/types/">
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>4</ns4:GrpId>
<ns4:MovementType>960</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>10</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>1</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>15</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>2</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>21-00001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>25</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>3</ns4:GrpId>
<ns4:MovementType>959</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>50</ns4:Quantity>
</ns1:result>
</ns0:getRecountUnitMovementsResponse>
And what I am trying to do is replace all the "/com/grifols/gds/webapp/inventoryCount/units/queries/common/" for "http://www.something.else". I have succeeded replacing it if the attribute name is "xmlns" instead of "xmlns:ns4". However, that ":ns4" changes everything and I can't get it to work. Does anyone know how to do so?
Thank you in advance. Don't hesitate to ask me for more information you may need.
Jordi

By the way, this is the XSLT transformation that works fine if we remove that ":ns4" from the attribute name:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:source="/com/grifols/gds/webapp/inventoryCount/units/queries/common/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
version="2.0">
<xsl:output method="xml" encoding="iso-8859-1" indent="yes"/>
<xsl:template match="source:*">
<xsl:element name="{local-name()}" namespace="http://www.something.else">
<xsl:apply-templates select="@*|node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>

Pipeline error for abap proxy to IDoc scenario

hi experts,
i am getting the following system error in moni for my proxy to idoc scenario.
In error it shows :
"Receiver service cannot be converted into an ALE logical system"
but i have checked adapter specific attributes of both receiver
and sender sys and they both have logical systems ( SO this is not the problem)
TRACE
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
pls suggest .
Appropriate points will be awarded

Hi,
Copy the payload from moni and test the mapping.
The error may be due to XML file generated by sender channel is not proper.
and also look at this blog
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Please reward points if it helps
Thanks
Vikranth

Restrict size of payload for OSB Proxy

Similar Messages

Maybe you are looking for