Restrict SNP orders on PPDS board

Hi Gurus,
When ever I am accessing the Detailed Scheduling board I am able to see both SNP and PPDS planned orders.
I want to see only PPDS orders and not SNP orders.
What settings I have to do to achieve my requirement.
Regards
Sravan Maturu

You need to configure 'Decision tables for graphical objects' for the planning board profile you are using in the planning board .
Here, you need to enter a condition for SAP APO Application eg.
IF
Table Name 3 Order
Field Name SAP APO Application
Relat. Operator NE
Compar. Value 4 << SNP
then process to next Decision group.
I hope this would help.
Rgs - Vikas

Similar Messages

SNP orders to PPDS orders

Dear Experts,
The system appears to have converted a number of SNP orders to PPDS while retaining the SNP orders too.but the orders should not have been converted to PPDS although they are outside the SNP horizon.
What could be the reason?
Kindly suggest the way out.
Regards,
Srinivas.S

Hi,
Please check the settings in the heuristics SAP_SNP_SNGL(Individual Conversion SNP --> PP/DS) or SAP_SNP_MULT, whatever you are using.
PPDS horizon is relevent for the conversion and SNP horizon may not be relevant.
The details are as below:
The conversion horizon for SNP to PPDS is decided as below.
Conversion Hprizon
The offset and the PP/DS horizon together define the conversion horizon, that is, the period in which you want to convert Supply Network Planning (SNP) orders and Capable-To-Match Planning (CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders:
Conversion horizon = PP/DS horizon + offset
You must specify a positive value for the offset. The conversion horizon begins on today's date and continues for the relevant number of calendar days into the future. So that the system converts an SNP or CTM order into a PP/DS order, the start date/time of the order must be within the conversion horizon. If you want to extend the conversion horizon to the end of the SNP or CTM planning period in which the end of the conversion horizon lies, you enter a daily buckets profile.
Hope this helps.
Regards
Datta

Convert SNP Orders to PPDS Orders in CIF

We have a requirement to segregate the orders created in SNP and scheduled in ECC. I know this can be done with the Production Planned and Production Confirmed key figures based on ATP Category as EE is for SNP and AJ, AK, AL, AI are PPDS. The complication is we are not using PPDS for short term scheduling; therefore ECC will control the short term scheduling. We are currently removing the Firm indicator on ECC for any SNP (EE) order using a user exit. This allows for seeing the SNP orders as not scheduled (not firmed) in ECC. When the scheduler firms the planned order in ECC we want the order to show in the production confirmed key figure in SNP. This can be done by setting the EE Firmed to the Production Confirmed key figure, but now the SNP Planner has SNP Orders on two different key figures. Therefore, our requirement is to change any SNP order (EE Category) to a PPDS order if it is firmed. This way Production Planned are SNP orders only and Production Confirmed are scheduled or created ECC orders.
We have tried using APOCF004 to change the APOAPPL from a 3 to a 1 and BADI ORDER_INB_MODIFY_AFTER_MERGE changing cs_ordkey-appli from 4 to 2. Neither of these options worked. Possibly because of the difference in structures and number range, the system is not doing the convert.
Thank you in advance for any suggestions.

Hi,
Please check the settings in the heuristics SAP_SNP_SNGL(Individual Conversion SNP --> PP/DS) or SAP_SNP_MULT, whatever you are using.
PPDS horizon is relevent for the conversion and SNP horizon may not be relevant.
The details are as below:
The conversion horizon for SNP to PPDS is decided as below.
Conversion Hprizon
The offset and the PP/DS horizon together define the conversion horizon, that is, the period in which you want to convert Supply Network Planning (SNP) orders and Capable-To-Match Planning (CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders:
Conversion horizon = PP/DS horizon + offset
You must specify a positive value for the offset. The conversion horizon begins on today's date and continues for the relevant number of calendar days into the future. So that the system converts an SNP or CTM order into a PP/DS order, the start date/time of the order must be within the conversion horizon. If you want to extend the conversion horizon to the end of the SNP or CTM planning period in which the end of the conversion horizon lies, you enter a daily buckets profile.
Hope this helps.
Regards
Datta

Error:conversion of PPDS order from SNP order-error /sapapo/rrp_heur45

Hi,
I am converting a snp planned order from ppds order in transaction /sapapo/rrp_sap2ppds and using heuristic sap_pp_002.But it is canceling the heuristic and giving above error message.I have given 60days ppds horizon and 61days snp horizon.lot size:lot-for-lot.Please suggest what to do?
Thanks&regards
venkadesh

Hello ,
The hueristics sap_pp_002 you are using is based on algorithm "planning of std. lots".
For converting Supply Network Planning (SNP) orders or Capable-to-Match(CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders, try to use a heuristic based on the algorithm /SAPAPO/HEU_SNP_CONVERT, such as the standard heuristic SAP_SNP_SNGL..
I think the above mentioned hueristics should be able to solve the problem .
Also for more information refer to below link.
http://help.sap.com/saphelp_scm2007/helpdata/en/8a/475c3c3906b106e10000000a11402f/frameset.htm
Thanks & Regards
Abhijit S Nakhwa

Automatic Creation of Planned Order in PPDS Horizon

Dear Experts,
Kindly answer my following query.
I have created PIRs before/inside my PPDS Horizon (its also falling outside horizon as SNP horizon is shorter than PPDS Horizon). If I check the PIRs created by me in /SNPAPO/RRP3, it also shows me planned orders corresponding to them. However, if I create PIR outside PPDS horizon then system is not automatically creating the planned order.
Kindly let me know which master data/configuration setting is responsible for automatic creation of planned orders within PPDS horizon.
Best Regards
Rinju
Edited by: Rinju Mukherjee on Sep 26, 2010 10:05 AM

Dear Rinju,
Check in Product Master PPDS view the Planning procedure maintained? if it is balnk check in the heuristic, the palnning procedure maintained.
Since automatic planning procedure(3) is maintained, that is the reason it is creating order proposals, it self.
Sree

/SAPAPO/RRP4 - SNP Orders

Hi,
I have some problems with APO SNP orders.
If I execute /SAPAPO/RRP4 t-code, for a month, I obtain 9 orders (1 SNP), but when I test extraction for BW in RSA3 with extractor 0APO_PPDS_ORDER_01, I obtain only 8 orders and the SNP one is missing.
There is an other standard extractor able to extract these information?
If I want to create a standard datasource, in wich table can I find these details (for example MENGE field)?
Regards.

Hi,
The data source 0APO_PPDS_ORDER_01 is not designed to extract SNP orders. It is designed for PPDS orders. But you can create a data source to extract SNP orders. For further informations check the online documentation at:
http://help.sap.com/saphelp_scm50/helpdata/en/8f/ca630f116211d5b3170050da385632/frameset.htm
you should create you own datasource for extracting SNP orders. Note all orders in APO stores in livecahe,not in database tables.
Regards,
Sunitha

How to conversion of SNP orders into PP/DS orders

Hi gurus,
How to conversion of SNP orders into PP/DS orders, Can u explain me, what is the process.
PRASAD

Hi,
You have to convert SNP Planned Orders to PPDS Planned Orders thru /SAPAPO/RRP_SNP2PPDS by specifying
Planning version,product and location and the standard heuristic SAP_SNP_SNGL and propagation range.
or in /SAPAPO/RRP3 and /SAPAPO/RRP4 directly.
Thanks,
nandha

Difference between SNP PDS and PPDS PDS

HI Experts.
Can you tell the major differences between SNP PDS and PPDS PDS.
Thanks
Raja kiran R

Hi Raja,
Unlike PPDS planning (time-continuous planning), the least time bucket in SNP planning (bucket oriented planning) is a day, not seconds. Which is why the duration of individual activities in SNP PDS are planned in days only. Scheduling in SNP is based on the fixed duration of an activity and not based on order quantity or capacity load. If a plan contains 3 activities each with fixed duration of 1 day, then the SNP planned order will have duration of 3 days.
On the other hand in PPDS, the duration of an acitivity is calculated based on the resource load that generates the order quanitity, which means larger the qty to be produced, the longer the duration of the activity.
Hope this helps!
Regards,
Umesh

SNP Subcontracting Vs PPDS Sub contracting

HI
Can anyone bring out the specific difference between SNP Subcontracting Vs PPDS Sub contracting
Also what i the significance of transportation resource in ppds subcontracting set up
SB

Hi,
Please check the below link, you can find detailed info.
http://help.sap.com/saphelp_scm41/helpdata/en/f7/626f39ff1ee32ce10000000a114084/content.htm
In SAP Advanced Planning and Optimization (SAP APO), you can plan the subcontracting process in Production Planning and Detailed Scheduling (PP/DS) and in Supply Network Planning (SNP). You have the following options:
A).   If the components for the finished product are to be provided by the ordering party (plant), you can plan as follows:
¡        Subcontracting with Source Location in PP/DS
¡        Subcontracting Without Source Location in PP/DS
¡        Subcontracting with Scheduling Agreements in PP/DS
¡        Subcontracting with Source Location in SNP
B). If the components for the finished product are to be provided by another supplier, you can plan as follows:
¡        Subcontracting with Third-Party Provision of Components in PP/DS
¡        Subcontracting with Third-Party Provision of Components in SNP
Capable-to-Match planning (CTM) supports subcontracting with source location in PP/DS and in SNP, and subcontracting with third-party provision of components in PP/DS and in SNP.
Thanks,
Venkat

Open orders in PPDS

Hi Gurus,
We are using PPDS in that DS had created 1000kg of materail A and released to PP (ECC) , actually produced is 800kg and my question is
1. Where can i see my open orders in PPDS?
2. Can i move the open orders for next day or next week?
3. Can i close my open orders automatically? is there any standard program or ABAP programe?
4. Can i close my open orders in ECC?
Please let me know. Thanks in advance.
Regards,
Kumar

Hi Kumar,
1) I hope you are using production orders during production. As and
when a production order is released(1000 Kg) and if only 800 Kg is
confirmed in ECC system, during next planning run, the balance 200 Kg
will show as fresh order. These orders can be downloaded using
transaction /sapapo/rrp4 transaction
2) You can reschedule the open orders as per your required date
in ECC system.
3) You can also techo the open orders in ECC system
4) Answer to question 3 is same
Hope you are clear now. Please confirm
Regards
R. Senthil Mareeswaran.

Creation of Manual Orders in PPDS in /sapapo/rrp4

Hi All,
We are using PPDS for production planning. In the process of generating a plan in short term horizon, after executing the scheduling heuristic, user wants flexibility of manually creating some orders.
We are using /sapapo/rrp4, where user can create manually orders in PPDS.
Last week, during some reading , came to know that , manual order creation in /sapapo/rrp4, only creates orders in Live Cache, it does not save orders in APO data base.
So, if i understand , live cache goes down, then all my order information will be lost. I long run , is it going to create a problem.
Has anyone worked in same kind of requirement.
thanks,
Rao

Hi
Most of transaction data in APO is stored in live cache whether created by heuristic or manually.
Of course if live cache goes down there will be problems but it will be no better if orders are created by heuristic..
Regards,
Nitin

Loading transaction data from flat file to SNP order series objects

Hi,
I am an BW developer and i need to provide data to my SNP team.
Can you please let me know more about <b>loading transaction data (sales order, purchase order, etc.,) from external systems into order based SNP objects/structure</b>. there is a 3rd party tool called webconnect that gets data from external systems and can give data in flat file or in database tables what ever required format we want.
I know we can use BAPI's, but dont know how. can you please send any <b>sample ABAP program code that calls BAPI to read flat file and write to SNP order series objects</b>.
Please let me know ASAP, how to get data from flat file into SNP order based objects, with options and I will be very grateful.
thanks in advance
Rahul

Hi,
Please go through the following links:
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4180456
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4040057
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=3832922
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4067999
Hope this helps...
Regards,
Habeeb
Assign points if helpful..:)

Restricting which orders stock can be issued to.

Hi,
Is it possible to restrict which order types a user can issue stock to using transaction MB1A?
We would like to prevent users issuing stock to orders created by other service areas. This could be restricted by the order type or planner group of the order (bother are unique to a service area).
Can this be done using authorizations or config?
Thanks.

I spotted it, thanks. I was unchecked, yet the swf would not
import.
Actually I noticed this problem while ago and posted a query
here, but
no-one reply. That time I did some experiments and it seemed
that swf which
were made by importing graphics and placing it on stage were
OK to import.
The swf where the graphic was placed into the library and
then used
dynamically with attachMovie(), work fine on its own, but
would not get
imported.
PS. For the moment I do not know the FLASH classed and I am
reluctant to
Load at a runtime because for ceratin resons I need the
published
application be encapsulated in a single Windows exe
projector. Anyway,
before considering other ways I need to know what is wron
with this one
"GWD" <[email protected]> wrote in message
news:evr180$3bf$[email protected]..
> Just to be clear... this is a publish setting... it
won't help you import
a swf
> that was previously published with this setting switched
on. I assume that
you
> can import the swf that you publish when its not
switched on.
>
> I can't figure out why you'd need to do this though
unless you had lost
the
> original fla and you need to make changes. If you want
to use the swf in
> another application you can just load it in at runtime.
e.g. with a Loader
> component or using the MovieClipLoader class in
actionscript.
>

Restricting the order type to sales area!!!

Hi All,
I want some clarification!!!!
Scenario:
(1)We have two sales areas
1000,10,00 and 1000,20,00.
(2)We have two order types zor and zare both have same Document priicng procedure 'A"
(3)Now the client wants to restrict the order typr zor to one sales area 1000,10,00.The system should not allow to raise an order with 1000,20,00 with combination of ZOR and A.
(4)As the client has raised a number of orders with 1000,10,00 with the combination of ZOR.now if we change the document pp of zor to X .will it effect any other documents.
Regards,
RK

T.Code: SPRO
IMG --> Sales & Distribution --> Sales --> Sales Document Type --> Assign Sales Area to Sales Document Type.
Here, based on Sales Area, it is possible to restrict the Sales Order Type. This will take care of point number (3).
(4)As the client has raised a number of orders with 1000,10,00 with the combination of ZOR.now if we change the document pp of zor to X .will it effect any other documents.
This will depend on copy control settings.
Regards,
Rajesh Banka

Ordering a DAQ Board--Help Please!

I was wondering what information needs to be known when ordering a DAQ board. I have 3 sensors that will be feeding information into the board, a pressure sensor, a centrifugal pump, and a pump control module. I have the gain and excitation voltage of the pressure sensor. Do I need anything more for that? Also, when you order a board how do you modify it to work with your sensor, or do you order it to specifically work with your sensors? Finally, is there an advantage to having a tower DAQ vs. a USB? Is one more easily updated? As you can tell I'm very new to this, so any information/pointers would be much appreciated.

I suggest you to contact your local NI office. They will be pleased in providing information to you and they can help you in selecting the proper device(s).
Please remind that not oonly the given transducers will determine the device(s) but also the environment you want to use them in.....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Restrict SNP orders on PPDS board

Similar Messages

Maybe you are looking for