Restrict tcode MRBR on company code - Note 399953 correct?

Hi everybody,
In the selection screen of MRBR you have the option to select a company code, but it is NOT CHECKING on company code.
I found a OSS note: Note 399953 - Authorization for CoCode in Logistics Invoice Verification
This OSS notes describes exact the problem and the solution should be to use FI validation rules. We have created them, but it is not working, because it seems like that it only works for "posting" and "simulating" tcodes!!! But MRBR is more a changing tcode.
We have put a break point into the user exit, which is used in the validation rule, but it is not executing the user exit, but for example for MR8M (posting tcode) it is working!
Please, can anybody give me an advice how I can get MRBR checking on company code?!
Thanks in advance, Philipp

Hello, we are using ECC 6.0 and we do have problems to implement Note 399953 - Authorization for co code in Logistics Invoice Verification at all. Coudl you please send me a screenshot of your implementation? I am really not sure how to insert the authority check coding in the validation!
Thanks in advance!
Best regards
Matthias

Similar Messages

Error - Company code not assigned to country or country to calculation proc

Hi All,
We are on ECC 6.0 instance.
While trying to post a JE, I am getting the error message "Company code not assigned to country or country to calculation procedure". I am able to post the JE for a another company code. It seems we are missing some configuration for the company code error is coming up.
Any ideas what is causing the errors. More details about the error are below:
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.

Hi,
You need to assign the tax procedure to company code.
Try transaction OBBG. and check whether the proper tax setting are maintained or not
You probably need to make other tax settings so you should check out
the menu Financial accounting>Financial Accounting Global Settings>Taxes on
Sales/Purchases in the IMG.
Hope it will work.
With Best Regards,
Navneet Chaubey

"Company code not assigned to country or country to calculation procedure"

Hi ,
I'm practicing SAP on IDES at home.
I have not created any 'Calculation procedure' (TAXINN or TAXINJ) neither assigned any procedure to
country 'IN'. I have maintained tax category 'MWST' for 'IN' in OVK1 and also assigned my delivering plant
for tax determination. I have also maintained tax relevancy for master records ( OVK3 - customer & OVK4 -
material ) and also maintained condition records for MWST.
Everything is working fine while creating normal sales order including accounting document creation &
posting. But when I'm creating a purchase order ( ME21N) for 3rd party process getting the error "Company
code not assigned to country or country to calculation procedure".
Plz help me with the solution how to create calculation procedure or which procedure should I assign to country 'IN' from the list of available procedure.
( I can't take help from FI guy as I'm practicing on my own )

Hi Arveen,
Check calculation procedure using T.code OBYZ(IMG > Financial Accounting> Financial Accounting Global Settings--> Tax on Sales/Purchases --> Basic Settings -
> Assign Country to Calculation Procedure.)
Select new entries--Enter tax procedure for India TAXINN-TAx procedure INdia
Save.
Use T.code OBBG....select position...enter IN....against that assign the tax procedure created above and save.
Hope this resolves.Let me know if you still encounter problem.
Thanks
Aravind

Info Record - Error Message "Company Code not assigned to Country"

Hi,
I am a beginner in SAP MM.
I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location. While saving the data error message is being displayed as "Company Code not assigned to Country".
Please let me know the reason for this error.
Thanks,
Vinod.J

Hi Vinod,
The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
Check whether customizing given in below link is done,
http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
Regards,
Pravin

COMPANY CODE NOT ASSIGNED

HI ALL
WHERE I HAVE TO ASSIGN CO.CODE TO COUNTRY. I GOT THE ERROR DURING PO. Company code not assigned to country or country to calculation proced

Hi,
Try this.
SPRO>Enterprise Structure>Definition>Financial Accounting>Define company
Maintain the Country for the Company.
Then,
SPRO>Enterprise Structure>Assignment>Financial Accounting>Assign company code to company.
I think problem will be solved.
Reward if useful.
Regards

Company Code not productive

While going through the system settings, I found that certain company codes are not having the status 'Company code not productive'. These company codes are in operation. I know that a company code in operation should be made productive so that programs will not get deleted by any change.
Can set the indicator 'company code productive' for all those company codes and move the changes to Production client ?

Dear,
There is nothing wrong if you set Company code productive latter after you went live. Information system auditor can may object if you do not set it productive because with this indicator unticked you can delete and reset GL Master data. You should ideally tick it and set it as productive.
Regards

Company code not assigned to country?

HI
After entering the material in MB1C it is displaying some error message...
Company code not assigned to country or country to calculation procedure.

Dear Maxx,
First,
T. Code: OX02 - assign your company code to the country
Then,
T. Code: OBYZ (Condition Element - Procedure)
Maintain Control Settings for Tax-Procedure.
Afterwards,
T. Code: OBBG - Assign Tax Procedure to Country
Finally,
T. Code: OY01
Assign, tax calculation procedure under Tab: Properties --> Field: Procedure
Best Regards,
Amit

Company code not assigned to country or country to calculate procedure

Hi,
When i am creating RFQ in MM its giving error "Company code not assigned to country or country to calculate procedure".
Please help me out.
Thanks in Advance,
Regards,
Shankar

Hi,
Check this
Please check the settings at spro-FItax on sale and purchasesbasic settings--check calculation procedure-/-Assign country to calculation proceedure.
Assign country to calculation procedure in OBBG.
Check whether tax code is assigned to company code in SproLO general-Tax on goods mov.IndiaBasic settingsCondition Based tax Procedure--Assign tax code to company code.
Try this also
Do the Following Customisation :
Step 1: Check Calculation Procedure
IMG >Financial Accounting>Financial Accounting Global Settings >Tax on Sales/Purchases>Basic Settings >Check Calculation Procedure
Tax procedures are available in SAP for most of the countries. In case a tax procedure is not defined for your country proceed as follows:
In this go to Define Procedures Check for TaxINJ or TaxIN
If it does not exist create a new one by copying it from TaxGB
Step 2: Assign Country to CalculationProcedure
IMG >Financial Accounting>Financial Accounting Global Settings >Tax on Sales / Purchases > Basic Settings >Check Calculation Procedure
In this step we assign the calculation procedure created in the earlier step to the country. The country is the country of the company code.
If you are living in India, then your country of the company code is India.
Step 3. Define TaxCodes for Sales and Purchases
IMG>Financial Accounting>Financial Accounting Global Settings >Tax for Sales and on Sales/Purchases >Calculation>Define Tax Codes
Update the following:-
Define two Zero Tax Codes input and Output Tax codes.
Go to OB40 Transaction code and Assign GL Account.
Do this your problem will be solved.

Company Code not defined in T001

Hi Friends,
This the error, when we try to upload the GL Entries into SAP via BDC Program.
"Company Code not defined in T001"
I have checked the table T001 - Company Code is their
I have created the GL Account too for that particular company code.
Possiblities of Error.
Regards,
vivek

HI,
I have already checked everything is fine.
My dought is in BDC Program.
When i tested in Testing it is working fine?
Can you help me out?
I need to check
Parameters, Validations, Mapping Else

Company code not defined in MIRO

Hi,
My PO price is 100$.When i try to give the amount 101 in MIRO.It is giving the error"Company code not defined"
Please help me in resolving this issue.
Thanks
Srini

Hi,
1st check entry of your company code in table T169P.
Now maintain the tolerance limits for your Company code in OMR6 t.code for the tolerance key DQ {Exceed amount: quantity variance} and PP {Price variance } and save.
Try your transaction MIRO now.
Regards,
Biju K

In MB1B - Error " AC519 - Company code not defined"

Dear All,
I tried posting in T-code MB1B & ME2O for Sub contracting (Item category L in PO).
After assigning Purchase Order in MB1B or ME2O, system is giving Error Msg
" Company code not defined" Message no. AC519
AC519 is related to Asset Accounting.
I have checked OBY6 all the settings is in place.
All answers/suggestion will be rewarded with point.
Thanks in Advance.
Velu Mudaliar

Hello Velu,
This may help:
You have to check the content of tables T093C, T093U, T093B, T093D.
There might be entries with value ' ' (initial).
If you cannot use SE16N to delete these entries, or you may create a
a self made abap to delete the entries.
cheers,
Jon

AA821 - Company code not defined in Asset Accounting

Dear Experts,
We are trying to Settle AUC using AIBU. Wherein we found error "AA871 - Company code not defined in Asset Accounting" in the last fiscal year
When we try to settle in current date, it is not giving any error.
We found one sap note "SAP Note 459719 - AIBU: Message AA821,AW521 for settlmt rule with "To" period". The note mentions that we need to remove the to period and to fiscal year from the settlement rule in transaction AIAB. However, there is not settlement rule in AIAB, instead there are documents posted to AUC asset.
Can any one assist in where to update the settlement rule or any alternative solution to the error mentioned above.
Thanks in advance.
Regards,
Nirav

Dear Ravi,
Thanks for your reply.
Even I encountered the same note.
However, it is not the solution.
The solution was to detach the existing Settlement Rule and create a new one.
Thanks anyways.
Regards,
Nirav Shah

There are 2 places to define Company Code, which is correct.

There are 2 places to define company code i.e.:
IMG -> Enterprise Structure -> Definition -> Financial Acc -> Define Company, and
IMG -> Enterprise Structure -> Definition -> Financial Acc -> Edit, Copy, Delete, Check Company code.
I know the one path updates table T001 and the other T880 but I don't understand the differences... probably as I am abapper.
Edited by: Gemini Twin on Jun 15, 2011 10:43 AM

Hi Gemini,
Company and Company Code are different.
The first path is to define Company:
IMG -> Enterprise Structure -> Definition -> Financial Acc -> Define Company
Second path is to define Company Code:
IMG -> Enterprise Structure -> Definition -> Financial Acc -> Edit, Copy, Delete, Check Company code.
(the practice when creating any new config in SPRO is to used Copy function instead of Create)
We can make do without Company. In my customer's system, we do not set up Company.
Company Code is a must and is the first step that you need to define before defining anything else (Pers Area, PSA, etc).
Chart of Account also linked to Company Code, not Company. The two are different, please do not confused them into one.

How to Restrict Intercompany Access By Company Code

We have multiple territories, of which each is assigned their own company code We'd like intercompany access to be restricted by company code so users only have intercompany access to only territories they have authorization for. Currently, we have role X setup and authorized users have access to this role.
Intercompany TCODES would include FBU2, FBU3, and FBU4.
The obvious solution would be to create additional roles via PFCG whereby each role has access to X company codes and assign these users to the appropriate role. Any other ideas? Also, with the ECC upgrade, doesn't this impact performance on the cube when trying to restrict roles by company code?
Thanks in advance!
Edited by: david kim on Feb 10, 2009 2:13 AM

Hi david kim,
Based on my experience, the best way is by maintaining the roles in Txn PFCG as what u did just now. FYI, there's no impact on performance on the cube when trying to restrict roles by company code. (we have faced it before when upgrading 4.6C to ECC6...with flying colors ...).
Hope this will solve your problem.
TQ
Regards,
Nazrul

Company Code not defined

Hi,
I have copied the standard program behind FB60 and created a new transaction named ZFB60. There is no change in the code except that I have added a field on the main screen.
Now the problem is when I run my transaction, it pops a dialog box and asks me
for the Company code. After entering that, it takes me to the main screen where when I enter fields 'Vendor' , 'Invoice date' and 'Reference', it gives me an error "Company code is not defined". But if with the same set of data I execute the original transaction FB60, it gives me no error.
My problem is that can any one tell me, why this error is coming, when I have made no changes to the original code. The only change that I have made is adding a field in the tablecontrol that comes on the main screen.
Can anyone help me?
Points assured for helpful answers.

Hi
Probably the program does some controls using the value of SY-TCODE, so u should find and replace them.
So if you have : IF TCODE = 'FB60', you should replace it with IF TCODE = 'ZFB60'.
It's not easy to create a copy of FB60, because the main program (SAPMF05A) of FB60 is called by many transactions, so it has a different behavior for every trx.
Max

Restrict tcode MRBR on company code - Note 399953 correct?

Similar Messages

Maybe you are looking for