Restrict the creation of documents in the cfolders after the Bid End Date

Hi All,
The System allows the bidders to create documents in cfolders even after the Bid Submission deadline has reached, whereas the Quotation would not be submitted as the Bid Submission date is in the past. Is there any way to restrict the creation of documents in the cfolders after the Bid Submission End Date?
Waiting for your reply,
Mary

Hi Mary,
In the competitive scenario in the first screen itself there are fields for "Due date" and "Due time". Once these entries are maintained, that particular collaboration will get freezed then and no documents or bids can be submitted post that time.
I hope this will solve your query.
Regards,
Nishit Jani
Award points only if you find the information useful.

Similar Messages

How to restrict update to a document in state release to the contribution g

How to restrict update to a document in state release to the contribution group.
Hi I’m working with UCM 10g and I want to know if it is possible to restrict the update over a document that is on state release for the group of users that made the check in of the document ?
thanks

Yes, it is, but IMHO in a rather complicated way:
- you could change the security settings (security group, or more likely, accounts) during the life cycle, or
- you could implement collaboration management, and change security settings via ACLs
Alternatively, depending on what you mean by "updating" documents you could also:
- check-out the document by a system account (if you want to prevent your users to check-in a new version)
- modify the GUI so that Update (metadata) action is not available to users (in theory, they could still access it via a direct service call) by a custom component
- introduce a Java event filter (enhancing the UPDATE service) where you will implement whatever logic you want
I would probably opt for the last options as it seems to me to be the cleanest solution (but yes, it requires some coding).

Can I automate the creation of a cluster in LabView using the data structure created in an autogenerated .CSV, C header, or XML file?

Can I automate the creation of a cluster in LabView using the data structure created in an auto generated .CSV, C header, or XML file? I'm trying to take the data structure defined in one or more of those files listed and have LabView automatically create a cluster with identical structure and data types. (Ideally, I would like to do this with a C header file only.) Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I've looked into EasyXML and contacted the rep for the add-on. Unfortunately, this capability has not been created yet. Has anyone done something like this before? Thanks in advance for the help.
Message Edited by PhilipJoeP on 04-29-2009 04:54 PM
Solved!
Go to Solution.

smercurio_fc wrote:
Is this something you're trying to do at runtime? Clusters are fixed data structures so you can't change them programmatically. Or, are you just trying to create some typedef cluster controls so that you can use them for coding? What would your clusters basically look like? Perhaps another way of holding the information like an array of variants?
You can try LabVIEW scripting, though be aware that this is not supported by NI.
Wow! Thanks for the quick response! We would use this cluster as a fixed data structure. No need to change the structure during runtime. The cluster would be a cluster of clusters with multiple levels. There would be not pattern as to how deep these levels would go, or how many elements would be in each. Here is the application. I would like to be able to autocode a Simulink model file into a DLL. The model DLL would accept a Simulink bus object of a certain data structure (bus of buses), pick out which elements of the bus is needed for the model calculation, and then pass the bus object. I then will take the DLL file and use the DLL VI block to pass a cluster into the DLL block (with identical structure as the bus in Simulink). To save time, I would like to auto generate the C header file using Simulink to define the bus structure and then have LabView read that header file and create the cluster automatically. Right now I can do everything but the auto creation of the cluster. I can manually build the cluster to match the Simulink model bus structure and it runs fine. But this is only for an example model with a small structure. Need to make the cluster creation automated so it can handle large structures with minimal brute force. Thanks!

Regarding the PPT or documents to give session regarding the HR- ABAP

Hi all,
Well and wish same from you.. Can please share the PPT or documents to give session regarding the HR- ABAP.
Thanks ,
Suresh

Hi ,
Please send to my personal id [email protected].
Thanks in advance..
Suresh.

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES. Maybe this is because of the new release ios 8.1 where after the update it went recovery mode then i didn't restore, i set up a new ipod. What's wrong? Is ths bcoz of ios 8.1?

My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?

How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

How do I received the filled out form via email? After the user hits SUBMIT, I'd like to receive the filled out form via email.

How do I received the filled out form via email? After the user hits SUBMIT, I'd like to receive the filled out form via email.

Formscentral doesn't support direct delivery of filled forms via email at this time. You can however use Acrobat to add an email link to a form instead of a submit button. In this way the PDF will be returned to the email of your choice.
Andrew

I have a problem in iPhone . When you receive a contact and press the key at the top to cancel the contact screen stopped working .ataml times after the last restart device

I have a problem in iPhone . When you receive a contact and press the key at the top to cancel the contact screen stopped working .ataml times after the last restart device

Since restarting did not help, reset your iPhone, see: Turn your iOS device off and on (restart) and reset http://support.apple.com/kb/ht1430
If that still does not solve it, check, if the contact you are trying to add is problematic. Try to save a different contact. Does that work?
If not, reinstall the Contacts app. This is only possible by restoring your iPhone, unfortunately.
See: Use iTunes to restore your iOS device to factory settings http://support.apple.com/kb/HT1414

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

Can you set the i pod to play albums one after the other as it seems to stop once its played the one album!! :-(

can you set the i pod to play albums one after the other as it seems to stop once its played the one album!! :-( thanks

Unfortunately that is the way the interface is designed. If you select an album from the albums menu, then it plays an album, optionally shuffled and/or repeated. If you select from the artists menu then you should be able to shuffle the albums or songs by that artist or have them played in sequence, again with options to repeat. You can also cue up a number of songs or albums with the On-the-Go playlist feature.
iPod classic manual
tt2

Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7

Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7

I have the exact same problem you have? I can occasionally getpushnotification, but only once a day fore facebook. For twitter, I get nothing and newer got. Other programs never got any notification att all.Push notification is on both under notification center and the respective programs.I have iOS 5.0.1 on iPhone 4S.

HT1926 Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix

Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?

Hi Richmoller51,
Welcome to Apple Support Communities.
See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Best,
Jeremy

Only about 2/3 of the column show. Also, paragraphs on sidebars, such as the Youtube subtitle sentences are cut so after the first line I only see the top of the second line.

Only about 2/3 of the column show. Also, paragraphs on sidebars, such as the Youtube subtitle sentences are cut so after the first line I only see the top of the second line.

If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
* Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Firefox > Preferences > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Restrict the creation of documents in the cfolders after the Bid End Date

Similar Messages

Maybe you are looking for