Restrict the data in main repeating frame
my report consists of 4 repeating frames.
main repeating frame consists of 3 child repeating frames
im not getting the data from 3&4 repeating frames. but the data is comming from 1&2. it contains two parameters in main group....
in such cases tht record should not been shown in the report...
so wat to do any alternative solution for this....
Please help me out with this.
Thanks.
Don't mind i am not yet clear.
My exact requirement is :
I have 3 measures and 2 dimensions.
A,B,C are measurures and D,E are dimensions
I want the report like this
D(Column1) E(Col2 ) A(April 2009 to Jan 2010)+B (Jan 2010) (Col3) C (Col4)
Please clarify me how to do this
Thanks in Advance
Edited by: user8949151 on Mar 10, 2010 4:06 AM
Similar Messages
-
Defining Authorizations for User to restrict the data in report.
Hi Gurus,
I have no idea on authorization concept in BI. Please give me anyone steps to creating authorization objects, roles and profiles to restrict the data for users.
Ex.
i have functinal location info object checked as authorization relavent with below data.
FL001
FL002
FL003
FL004
FL005
FL006
FL007
FL008
FL009
We have users like below.
User1
User2
User3
Now, if User1 is analysing a report he can see only FL001, FL005, FL009 only, remaining have to be omited.
If User2 is analysing that report he can see only FL002, FL003, FL009. And like wise.
So, Please help me providing the completed steps. I have done somting but failed.
Thanks in advance
Peter.Hello Peter,
Please go through the following links
Authorization :
http://help.sap.com/saphelp_nw70/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
SAP Authorization Concept :
http://help.sap.com/saphelp_nw70/helpdata/en/52/671285439b11d1896f0000e8322d00/frameset.htm
Thanks.
With regrads,
Anand Kumar -
Restricting the data using attributes
Hi All,
I have to restrict the data in my report based on the Order type and Order Status. But these 2 fields are
attributes to Sales Order. Is there any possibility to restrict the query using the attributes of a CHAR.
Rgds,
Nene.Hi Nene
May be your mate
this is the F1 help text
<b>Selection of Filter Values for Query Definition</b>
<b>This field describes how the selection of filter values and the restriction of characteristics functions when you define queries</b>.
The values from the master data table are normally displayed when you restrict characteristics. For characteristics without a master data table, the values from the SID table are displayed instead. In a number of cases, however, it could be better to display only the values that are in the InfoProvider. The setting "InfoProvider Values Only" is permitted for this reason.
<b>Selection of Filter Values for Query Execution</b>
<b>This field describes how the selection of filter values functions when a query is executed</b>.
Normally the values from the data selected by the query are defined when you select filter values as you execute the query. Only the values for which data was selected for the current navigation status are displayed.
In a number of cases it can make sense to permit additional values as well. The settings "InfoProvider Values Only" and "Master Data Table Values" are allowed for this reason. If you make this selection, the message "No Data Found" may appear after selecting filter values.
and regarding the status 6 records are you sure that the master data related to that is active if not run arrtibute change run that might be helpful
Regards
Ajay -
Can we restrict the data to be entered in payroll area
Can we restrict the data to be entered in payroll area?
Hi,
In my lilmited knowledge I think we can only default the payroll area using ABKRS feature.
We probably have to use a user exit of BADI to restrict it.
cheers
Ajay -
How can we restrict the date range in the date picker
While selecting any date a pop up date picker appears. In this date picker the users can select any future dates which can be 30-40 yrs ahead. How can customize this date picker so that the users are not allowed to slected date beyond certain range. ...??
Hi user570596,
I think there is no method to actually restrict the date picker popup, but you can use the ApexLib Framework (http://apexlib.sourceforge.net/) to define a min/max value for your date field. This will prevent the user from submitting the page when the date value is outside the defined range.
See http://inside-apex.blogspot.com/2007/03/min-max-value-validation-in-browser.html
for details.
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net -
Restricting the Data from the Controller to the BSP
Hi All,
I have a requierment wherein i need to restrict the data that is passed from the controller to the view.
The Scenarion is this !!!
For succession planning and Erec a list of Qualificaitions are displayed for the user to choose from.
SAP uses a standard Catalog SAP_ERECRUITING which contains a list of Qualificaiton. This Catalog is maintained in the view V_T77QC_VIEW.
It uses the same Catalog SAP_ERECRUITING for both Succession Plannin and Erec.
For Sucession Planning the BSP Application is HRSCP_REQ_MNT. The Controller class makes use of the method GET_QUALI_CAT_COMPLETE to get this list.
I need to restrict the list such that it picks up the Qualifications that are maintained in a Custom View rather than SAP_ERECRUITING.
How do i accomplish this?
Goin for Implicit Enhancements is one solution that i could think of. Is there any other BADI or User Exit that does this?
Any input on this is much appreciated.
Thanks for your time.
Regards,
PavithraYes!
This particualar method is not the method of the Controller class. It is a series of calls to a method in the standard Class CL_HRRCF_QUALIFICATION.ie.
The Controller class of the page calls the method get_qualis which in turn calls the method get_quali_cat_complete of a different class (which is used else where also) where this particular view is set. So i guess having an additional parameter wont work. Hope i am making sense to you. If i am not understood please let me know i shall elaborate the scenario.
Thanks again for your time.
Regards,
Pavithra
Edited by: Pavithra Lakshmi Kesavaram on Jul 14, 2008 8:56 AM -
Reports - Data source for repeating frames
Does anybody know if there is an alternative way to pass data to repeating frames than queries or ref cursors?
For example can I use a PL/SQL table as source for a repeating frame?YES!!!, change the PRINT condition of your
panel field to ALL instead of FIRST.
null -
I have found my iPod touch after not using it for several years. I now cannot get into the device as i am locked out. Is there anway of getting into it without loosing the data? if not i would just like to acess it and start again. i have tried to resore the ipod and firstly put it into recovery mode. however after this process a message alert pops up saying; "the iPod could not be resored. the device cannot be found" please help? i am very frustrated with apples software to resolve the problem, is there anything else i can try?
Sorry, there is not.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
6. Restoring iPod touch after forgotten passcode
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
How to restrict the data with Filter in Query - Updated the description
Hi all,
Free Characteristics: u2018Service Orderu2019 & u2018Statusu2019.
Key Figures: u2018Response Timeu2019 & u2018Data Record Counteru2019.
Calculated Key Figure: u2018Resp Time > 1 hru2019.
Only u2018Plantu2019 is in ROWS and u2018Resp Time > 1 hru2019 & u2018Data Record Counteru2019 are in COLUMNS section.
The report looks like the below:
Plant---Resp Time > 1 hr -
Data Record Counter
100--1--
2
101--1--
3
After dragging the u2018Service Ordersu2019 from u2018Free Characteristicsu2019 , the report looks like the below:
Plant---Service Order -
Resp Time > 1 hr ---Data Record Counter
100--111--
1
100--120--
1
101--130--
1
101--141--
1
101--150--
1
I want only records whose u2018STATUSu2019 is u2018Yu2019. The u2018STATUSu2019 is u2018Blanku2019 for Service Orders 12, 13 & 15
and those records should not be there in the report.
The report should be like the below:
After dragging the u2018Service Ordersu2019 from u2018Free Characteristicsu2019, the report looks like the below:
Plant---Service Order -
Resp Time > 1 hr ---Data Record Counter
100--111--
1
101--141--
1
After creating the Restricted KF u2018Countu2019 on u2018Data Record Counteru2019 by restricting u2018STATUSu2019 to u2018Yu2019 and
dragging the u2018Service Ordersu2019 from u2018Free Characteristicsu2019, the Count shows ZERO :
Plant---Service Order -
Resp Time > 1 hr ---Count
100--111--
0
100--120--
0
101--130--
0
101--141--
0
101--150--
0
If I keep the Filter (globally) on 'STATUS = Y' then it returns 'NO Data'.
If I keep the u2018Service Ordersu2019 is in u2018Rowsu2019 and the Filter on u2018STATUSu2019 (u2018Yu2019) then it works fine, but the report should be based on PLANT.
Thanks in advance.
Reagrds,
Venkat.Hi Gurus,
Thanks for u r all prompt replies...
Got the Solution...
Actually no need to work at query level...
iN Multiprovider.... we can select the WBS element Char for which ever cube data we want... just drop down the char in to the dimension which we need and R/click the Char select identification of participating char.. un-select the check box for char WBS element for the Cubes which we dont require the data......
Thanks to all
Cheers
Lajwanth
Edited by: Lajwanth Singh on Apr 27, 2010 10:41 PM -
Crystal Reports - Charts - Restricting the data points on the X-axis
Hi,
Is there a way to restrict the number of points to display on the x-axis of a crystal chart keeping the number of data points the same.
For example, if the chart plots date vs value points and the data for the chart is from 1980 to 2009. This means the data points on the x-axis appear very close to each other.
I need a way to show the chart with all data from 1980 to 2009 but limited x-axis labels. Is there a way to configure the number of labels to show on the x-axis.
Thanks!Thanks for the answer.
"Right click on one of the x axis labels and select Group (X) Axis Options...
On the Layout tab there is an option to Skip Group Labels, check this and enter in the number of labels you want to skip". Is there a way to do this from a .NET client or via a formula field in Crystal itself. The data points is going to be dynamic, hence the requirement is to dynamically configure the "number of labels" to be skipped.
Thanks. -
Porblem in displaying the data in main window and footer in sapscript
Hi Friends,
I have created a 2 pages with a main window and 6 footer windows for purchase requistion printout. My requirement is footer windows should only be displayed at the last page. If i bring the footer window at the last page there is blank space in all pages after the main window since the main window size is smaill, if i increase the main window size it is overlaping footer windows at the last page.
I want the main window shouldbe big and footer should be displayed at the last page.
please hellp me to solve this.
Thanks
Gayathri SIf you want to position footer texts right after the last line of the MAIN data (thus, anywhere in the page), you define them as text nodes inside the MAIN window, and you use a template node if you wan't to position them precisely.
If you want to position footer texts relatively to the page edges (and not relatively to the MAIN), do like this (as my previous answer is wrong):
- define your footer windows in the same page of the MAIN, select condition "Only after main window" (so that the windows will be printed on the page of the last line of the MAIN data.
- If the footer windows span over the MAIN window (because you want to maximize MAIN window height on all pages except last where you put the footer, as it was the case for Gayathri), you must add a template node inside the MAIN window, as the last element. Its height must be equal to the part of MAIN that is overriden by the footer windows, so that a new page is triggered automatically if there is no sufficient space and the footer windows will be printed on next page, and if there is enough space, the footer windows will be printed at the bottom of current page. -
Restrict the dates in calendar dashboard prompt
Hi All,
We have a requirement where depending upon the type of report selected,the users should be restricted in their selection of dates.
Is there any way we could control the dates shown in calendar prompts?
Thanks.I'm sorry I have misread your initial question. So you want to restrict the calendar. I don't think this is possible, I'm afraid.
-
Mapping the data from main window to a popup
Hi Everyone,
Am an infant when it comes to UI5 development.
i have been reading up as much as i can, but i need your help with a requirement analysis of mine.
there is a main window of the UI5 screen, which has the details of a Service order.
when the user clicks on a particular button(to create a sub service order), certain fields that are available in the main window should be automatically populated in the window that pops up.
The UI fetches the data from an SAP r?3 backend system using Odata protocols.
Awaiting your valuable inputs.
regards,
Vamsi
PS: am sure that this is a very basic question, it would be of gret help if any of you might share some links that will be useful for me.
Appreciate your help very Much.Hi,
You can bind multiple UI elements to the same property of the same model.
Data Binding: Getting Started - User Interface Add-On for SAP NetWeaver - SAP Library
If you want to reuse ui-elemnts I suggest you take a look at
SAPUI5 SDK - Demo Kit
Kind regards,
RW -
Printing a Line at the end of a Repeating Frame in Reports 6/6i
Hi Folks,
In few of my designed reports I want a horizontal boiler plate line drawn at the end of the repeating frame on each page. The Number of Records property of the repeating frame is set to 0, i.e., depending upon the margin allocated on each page the report should fetch as many records as they can fit in the allocated area of the frame. I have also set the Page Protect property of the repeating frame to Yes, since we want the description of the records to be displayed fully on each page i.e., a record displayed last on a page should have its description on one page and it should not go to the next subsequent page. Now when I draw a horizontal boiler plate line at the end of the repeating frame in the Layout Model and set its property to Print on all Pages, the line in few pages of the report does not print at all and on the rest of the pages it is displayed at its correct position. I have even tried using an Anchor but it still does not work. Do I need to set the property of the anchor or am I missing some basic point here?
TIA
HassanHi there,
I have tried that but when the records are less in number on a page i.e., 1-2 then the line do prints on each page but there is a gap between the line and the last record.I want that the line should print right after the last record. Should I use an anchor here? But we cannot use an anchor between a line and the margin.
Any ideas?? -
In RSA3, Data Selection is not Restricting the Data
Hi Guys,
In RSA3, if check the entries after providing the Selection Criteria, it is extracting all the Data.
I tried for OSS Note. I didn't find any?
Please refer this information:
We load data from a source system EBP (similar to R3) to our BW system. The four ODSs (targets) we are using are:
0BBP_SC (Shopping Cart - Individual Documents)
0BBP_SCA (Approval Process for Shopping Cart - Single Documents)
0BBP_INV (Invoice - Single Documents)
0BBP_CON (Goods/Services Confirmation - Single Documents)
And the four Datasources related to the above respectively are:
0BBP_TD_SC_1
0BBP_TD_SC_APPR_1
0BBP_TD_INV_1
0BBP_TD_CONF_1
In the four InfoPackages related to the above, we use company code 0COMP_CODE (which corresponds to EBP field CO_CODE (Company Code in FI System) as data selection and the range, e.g., from X100 to X200, but somehow other company code ranges of data get in, e.g., Q001, Q100, 1000, and etc. What would cause the problem?
Thanks
Nagesh.Can you just try giving only one value instead of range and see what it comes?
Ex: Company code = X100?
regards,
Hari
Maybe you are looking for
-
Opening and cleaning a Macbook Pro (retina 2012)
I have had my MacBook Pro retina for more than 2 years, without cleaning the insides yet I have used it extensively, many hours every day, and there has been periods of daily smoking Should I just order a screwdriver set (pentalobe?), open it and cle
-
File Share crawl - NetApp Servers - Permission Issues
hello, There are many file share contents hosted on NetApp, which are being crawled by the SharePoint 2013 Search engine in our organization. The Search Crawl account is granted Read and Execute permissions on the Shared Drive. The crawler reads the
-
Can't see you tube videos: why?
can you help me please? I downloaded last Avobe version (Adobe Flash Player 11 ActiveX - 11.4.402.287) but i still can't see some youtube videos. What else have i to do? Thanks
-
We have started getting the above error message in a system that has worked happily for the past 6 months or so (and continues to work happily from our disaster recovery environment). I should probably add that this occurs when we are attempting to w
-
Safari (and Firefox) not allowing Netflix website to work
All of a sudden (about a week ago), when I went to watch a movie on Netflix, the website wouldn't work and came up with an error. I have never seen this before and I really don't know where to go from here. The error message reads: HTTP Status 500 Ty