Restrict to create lot for 08 inspection type

Hi,
In our busibess scenerio we are creating Inspection lot through 08 inspection type with movement type 322(from unrestricted to Quality) but we want to restrict 311 movement type to create Inspection lot for the same material. I have deactivated configuration setting for the movement typy 311 but still it is creating inspection lot. Kindly advice me the correct process to restrict lot in QA32.
Regards
Neel

Dear,
You can also try that remove inspection type from material master.
Sandip

Similar Messages

Inspection Lot for inspection type 09_ Vendor field is blank

Hi,
Inspection lot for inspection type 09. I am not getting the vendor name in inspection lot details. Vendor field is blank.
I need this field updated. Please guide me what to do for this.
Thnaks & Regards
Kundan kumar

HI Ashok,
I checked in material batch data( msc3n) vendor details is there.
Please update me more in this regard
Thanks & Regards
Kundan kumar

Restrict UD code group for Inspection type

Hi,
I want to restrict UD code groups for each inspection type.
Let say : for 01 Inspection type - system has to show only 01 code group.It should not display the remaning code groups(02,03....)
sridhar.R

Hi,
To achieve this you need to create separate Selected Sets.
Run QS51----> Create a Selected set with Catalog type "3 - Usage decisions" E.g. Z01 is created for Inspection type 01.
Here you assign only Code 01 (Don't assign the un necessary codes)
Now Follow the Customizing path....
SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute========>
Select inspection type 01 and assign the previously created selected set (Z01) here at the field "UD selected set"
Now system will populate only those codes that are covered under the selected set Z01.
Do the same for rest of all inspection types.
Regards,
Shyamal

Inspection lot for inspection type 10,11,12

Hi,
My requrement is system should generate inspection lot at the time creation of sales order & before PGI.I assigned
inspection type 10,11,12 in QM view in material master.I have a quality planning with usage -3 & status -4.But when I am creating sales order & doing PGI system is not generating inspection lot.
manoj

Hi
check following QCC0>Qulity inspection>Inspection lot creation>Inspection at shipping>
Assign Inspection Lot Origin to Delivery Type
Assign agaist del type:
10 ; Outbound Delivery
11 :Delivery w/o Ref.
similerly for 12
Also
Assign Inspection Type to Delivery Category -->assign inspection lot origin & Inspection type for del catagory
Regards
Sujit

Inspection lot for inspection type 08

Hi Eperts,
Please tell me following:
Inspection lot does not create when transfer material from plant to plant.
Created STO PO in plant 1000. Issueing plant is 2000.
MMR maintained in both plant with inspection type 01,08 activated in both plant.
As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
What could be problem.
Regards,
Raja

Hi Raja,
In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = ' ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
Regards,
Roderick

Quality Mgt - can I create a new inspection type for source inspection

I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
What is the application of vendor inspection lot origin ? Can be used for source inspection ?

HI,
For source inspection.
If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
But before that , check whether you can use the existing insp type 01 / 0130.
You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
Also go through the help tips provide by SAP
Inspection Type for Insp. Lot Origin (Source Inspection)
    Inspection type for the source inspection
Use
    If you enter an inspection type for inspection lot origin 01 in this field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
Dependencies
    The inspection type must be active in the inspection setup (Quality Management view) of the material master.
    If a status profile is stored in the quality info record for the supply relationship, a goods receipt inspection takes place instead of a source inspection.
Regards
K.M.Arun

Inspection Lot for I type 10 does not generate

Hi team,
When SD does a PGI, as per Material I type-10 a lot should be generated. but this fails to occur. I type is active on the material. Infact it has 4 and 10 active. I lot for i type 4 generates fine, but for i type 10 it does not. QM control in SD for customer(QV51) is also created. Am i missing something here. I did some search and tried checking will all those steps too. but no go. Any suggestions

Hi,
Let us understand the inspection type 10 first. It will create an inspection once the delivery note is made. I guess you seek one after the PGI. Did you get one after the delivery ?? Or may be there is some confusion with the words
Other than what Anand has suggested, please check what is maintained in customer specs in Cust info record (QV53). It should be Before delivery if PGI is to be blocked before inspection or After delivery to make PGI possible without inspection.
ntn

Authorisation object for inspection type

Dear QM consultants,
We are developing one Z program where plant, inspection lot origin and inspection type are main input fields. We want to add authorisation object based on these inputs. I checked for M_BEST_WRK for plant and Q_INSPTYPE for inspection type. Object for plant is working fine but we are unable to restrict based on inspection type since Q_INSPTYPE does not have any activity field associated with it.
Has anybody come across such issue? Whether objects taken by me are correct, if not can anybody guide me what are the authorisation objects to be taken.
Thanks in advance.
Best Regards,
Anand Rao

Hi
Create your own autherization group with SU21
This will bring better control
Regards
Sujit

Goods Receipt generates inspection lot using inspection type 08

Hi,
I have two plants A and B. I have set up my materials with an 08 inspection type plant B. Material transfers from plant A and B generate an inspection lot using inspection type 08 and inspection lot origin 08. This works perfectly.
However if I use a stock transfer between two storage locations within 1 plant, using stock transfer order, inspection lot is generated using inspection type 08 when GR is performed.
Is there a link between 08 inspection type and 101 movement
Regards

Yes ,101 & 08 are associated with each other for stock transfer order that is only when receipt indicator is "X" and mvt indicator is prchase order.
If you do not want this to haapen then
copy mvt type 101 as Z01 & for this mvt type deactivate QM in
QCC3->inspection lot creation->Inspect for goods mvt->Deactivate Quality Inspection for a Movement Type>Z01-->deactivate
Use this mvt type when you are tranferring material from storage location to storage Location.
This will not create any inspection lot.
Edited by: Sujit Gujar on Aug 4, 2011 1:09 PM

No quality notification type has been defined for inspection type 89

Hi
When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
I want to know where do I configure it??
Regards
Suresh

Hi
Path for assigning the Qualtiy notification type to Qualtiy inspection type:
SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
Maintain Inspection types.
Select the inspection type and goto details screen
You can find notification type field in the details.Give the value and Save.
Regards
Ramakrishna

Inspection Specifications from configuration for inspection type 10

Hi All,
We need the inspection specifications for inspection type 10 (Insp. for delivery to cust. (w/ order)) from the characterstic values of the Sales Order Configuration. We have done this successfully for inspection types 03 and 04.
In configuration the checkbox of "Insp. according to configuration" is not available.
Kindly suggest how to do this. We urgently need the solution.
Regards
Ramakanth

Inspection accrd. to configuration is not possible with inspection type 10/11. If you are batch managed and you maintain the same char. specifications in batch determination, you can explore the option inspection by batch option available for insp.type 10, which will get the spec. from the batch.search strategy maintained for the customer.
As of now I dont know how you can do if the above option does not work .
Thanks,
Ram

Inspection lot creation for inspection type 05

Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
Ram

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection lot for Mvt type 311 between two storage location only

Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

Inspection lot with inspection type 03 - Using Inspection plan

Dear friends,
I want to create an inspection lot at the time of production order release (ideally - insp type 03). But I want to use inspection plan as a task list instead of routing for that lot.
Is it possible?
Best Regards,
Avinash

Hi Swapnali,
Was expecting this re-question.
We are at a stage where system is already ready. The routing master data contains large number of alternatives and huge number of parallel sequences. We were looking for a solution in which we would make an inspection plan without touching routing master data. Second I want to create the lot at the time of order release (basically one lot per production order) so don't want to use insp type 04.
In config, I assigned task list type Q in front of lot origin 03 (Maintain Inspection Lot Origins and Assign Inspection Types).
But still system is picking the routing and not inspection plan. Is there a way out?
Regards,
Avinash

Multiple notification against single inspection lot (03 inspection type)

Dear friends
While recording the defects multiple times against single inspection lot (03type) , all the defects are added in single notification, but my client requirement is they want different notification. if any body knows please tell me.
Note : in inspection type there is a option of multiple notification against single inspection lot, but this is
not working (i think it will work only serial number,equipment and functional location get changed)
Please do the needful
Regards

Hi Karthikeyan
As you mentioned it is not possible to create notification other than based on the object types.
A work out can be make an action box in the notification for creating another notification with the help of ABAP ( call transaction QM01) and while doing this the entire datas of the inspection lot gets copied into the notification. you may have to use a user exit also.
Defect can be recorded in the item level by the user.
Sounds difficult but certainly possible
Regards
gajesh

Restrict to create lot for 08 inspection type

Similar Messages

Maybe you are looking for