Restrict wireless internet access on certain periods of time

Hello,
We need help on setting up a network with some restrictions for the attached clients.
We're quite new at setting up a network at this size.
Used devices:
1x SRP 540 router
1x SG 300-10P managed switch
4x AP 541N accesspoint
What we want to do:
1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
2. Not all wireless devices are allowed on using the wireless network.
3. There are also wired desktops that don't need restrictions.
4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
What we were able to do:
1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
What we tried already:
1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).
Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
Thanks already for your guidelines.
Wim

what about the thoughts of radius for authentication which is connected to active directory for your wireless users. Then have those people you must limit access too during the day in their own security group that's only allowed to login to the domain during certain times of the day.
To limit sites or what they can do on the Internet will require a separate solution for content/URL filtering. Then you can make policies and apply to your security groups in active directory block by category, keyword, and so on.
This is all great assuming you can get these clients into AD.
Just a quick thought, hope it helps.
_dschlicht
Sent from Cisco Technical Support iPad App

Similar Messages

  • Wireless Internet Access (Cisco IP NGN or Cisco Wireless Mesh Networkin)??

    Dear Cisco Wireless Team
    Please educate us on where to start, or the CISCO product we might need to purchase
    We are trying to branch out a new Internet wireless access and wireless phone service business in our company, and presently looking for the right Cisco product solution to purchase to enable us offer this service in LAGOS, NIGERIA.
    The service will be rendered in Africa, the country NIGERIA, and the city LAGOS.
    We would like to mount or install the product in Lagos, Nigeria.
    As we are new to this kind of service. We would appreciate if the Cisco wireless team can work with us in pointing or directing on the right product to purchase and what are required. We understand the Cisco Wireless Mesh Networking Solution, Cisco IP Generation Network, Cisco 12416 or 7600 Series Router might be the right products to purchase, but we are not sure on what needed or what are required to meet our service need.
    Possibly we would like to offer Wireless Internet Access to unlimited subscribers, and also Wireless or Mobile Phone service to unlimited subscribers in Nigeria.
    Anticipating your reply

    I suppose Cisco Wireless Mesh Networking would be a good choice.The Cisco mesh architecture makes it easy to scale coverage as capacity needs dictate, including increasing access point density; adding wired connections, controllers, and radios; and using dual high-powered, high-sensitive radios and a selection of high-gain antennas.Refer the document for IP NGN in the following URL http://www.cisco.com/en/US/netsol/ns537/networking_solutions_solution_category.html

  • Wireless Internet access via requires unplugging cable modem -

    I have a brand new MacBook Pro with Snow Leopard (10.6.1) and Airport Express (7.4.2). I have high speed Internet via Comcast/cable modem. I spent 30 minutes with the Apple Tech Support folks and was finally able to get wireless internet access. However, after I shutdown and reboot, the only way I can wireless internet is to unplug the internet cable from both the wall plug and cable modem and unplug the modem, both for about two minutes. This isnt what I had in mind when I crossed over from the dark side (PC laptop world) and am having buyer's remorse. Does anyone know how I can fix this problem (i dont want to unplug cables before each session on the internet)?

    Mr. Timmons,
    Thank you so much for the response.  I thought the complete reboot would work, but apparently not.  I followed the directions precisely, even waiting a few minutes longer than suggested for each of the steps.  My air express is still blinking yellow.  I think the issue has something to do with the DHCP and the IP address which are diifferent. The IP address is one series of number (starts with 169), and the LAN IP address is another number (starts with 10). Status on airport express show yellow for internet connection, and yellow for no DSN servers. When I go to the internet tab of airport utility, it shows the iPv4 address starts wutg the 169 number. When I click on the network tab, the DHCP range starts with the 10 number.  When I open the Network Options window, the iPv4 DHCP range starts with the 10 number.  I am at a loss as to how to get them to match up (with either the 169 number or the 10 number).  V/R sjbgtmo

  • Wireless internet access in other countries

    Does anyone know if the iBook can be used for wireless internet access in other countries, specifically Buenos Aires, Argentina and Italy?
    iBook G4    

    Hi,
    never had any problems with this (hotels and airports throughout Europe, Middle-East,...), somethimes you get immediate access to a provider when using your browser (then all you need to do is buy time with your credit card number); or by using the internet application: you will see the names of the providers in the list because of the signals your computer receives; then again you need to buy time;
    greetings, Dag

  • I recently bought an i phone 5, but in the home with wireless internet access, it si countinued when off, i do not know what reason.  but i go to apple store, the phone can working with Wi-Fi

    i recently bought an i phone 5, but in the home with wireless internet access , it is continued when off, sometimes can not working,
    i do not know what reason,  but i went to apple store, Ha, the phone can go to Wi - Fi and connected is good.

    but in the home with wireless internet access , it is continued when off, sometimes can not working,
    What does "it is continued when off" mean?
    And the same for "somtimes can not working"?

  • Relocating and wireless internet accessibility

    I'm relocating and I'm wondering how I can find out if I have wireless internet access there and if I can keep my Fios or if I'll have to switch to another provider.
    Thanks.

    You may want to post this on the Residential side of the forum as this is for the cellular phone side.
    At the top of this screen is a tab RESIDENTIAL. Click there and you can set up an account on that side and ask your question.

  • How to block internet connection for a period of time?

    Hey guys is there a way to block internet connection via a lan connection for a period of time? A program that when my pc is boot up it run secretly and at the time schedule it block the internet connection with no pop up. When i not at home some person
    used my pc to use my internet connection everyday. I can't lock up my pc since my brother or my dad used it.
     

    Hi,
    You could create a schedule task to achieve this.
    The detailed solution please refer to this thread:
    https://social.technet.microsoft.com/Forums/en-US/7544cbed-507d-4eef-907d-bafb99b45411/disable-internet-for-a-set-period-of-time?forum=w7itprogeneral
    Karen Hu
    TechNet Community Support

  • How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone.  I don't want to delete everything just the oldest ones.

    How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone.  I don't want to delete everything just the oldest ones.

    If you update to iOS 8, you can select that in Settings>Messages>Keep Message and then select your option. If you don't update to iOS 8, you'll need to do it manually.

  • Information on the reports that have run over a certain period of time

    Hi everybody,
    do you know any report (programme, table or other object) that provides with the information on what reports have been called by the users over a certain period of time in the past? I am especially interested in the reports in the customer name space (z-reports). Once there was a programme called RBE (Reverse Business Engineer) that could give this information, but it doesn't function in ECC 5.0 & ECC 6.0 anymore and no longer supported by SAP.
    I would be grateful for any information. Thank you! Nat

    Transaction ST03N will give you all the information you seek and then some!

  • Exchange server 2013 services need to restart automatically at certain period of time how do i schedule

    Hi All,
    Need to restart exchange server 2013 services automatically at a certain period of time is there a script to schedule to automate can you please help me step by step process.
    Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
    Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

    You can create a PS1 file and run it in a scheduled task.
    The PS1 files will need to have this.
    Restart-Service MSExchangeTransport
    Restart-Service MSexchangeIS
    etc...
    How to add a Scheduled task is given in this link.
    http://www.mikepfeiffer.net/2010/02/creating-scheduled-tasks-for-exchange-2010-powershell-scripts/

  • Using Bootcamp Windows 7, my wireless internet stays connected most of the time, but occasionally says "no internet access", then reconnects after a period of time. How can I keep a stable connection?

    I'm running Windows 7 Ultimate on Bootcamp. I've installed all Windows software, with all the drivers, and my wireless internet works fine. But, every once in awhile, it will say, "no internet access", and I'm unable to do anything until it restores. Like I've said, all the drivers have been installed, and they're both copied onto my desktop, and on a flash drive.
    I need to keep a stable connection, because I only use my Windows partition for gaming, and when I get disconnected from the internet, I get booted from the game. Any advice?

    what version of bootcamp you use to install all of the driver ?? is it the problem was from the beginning you installed windows or just now ?? or maybe you can try usb wifi to test the windows is not the problem..

  • Wireless internet access issues

    Hi All,
    Now that I have the back up battery issue resolved and my mac works again, need some help with my airport connectivity.
    I have a circa 2000 Imac DV, using OS 9.1. I just purchased and installed an airport card. I used to use dial up internet access and am now trying to access the internet via my Verizon wireless DSL. The little telephone icon appears on the tool bar. Is this correct?
    The computer won't recognize my secure WEP DSL password and seems to try to access the internet via the PPP connection.
    I have a secure WEP internet connection. Just a few days ago a friend of mine was able to access the internet from my DSL via her new powerbook. Her computer accepted my WEP password.
    Do I need to make any system configuration changes to turn off the PPP connectivity to use my airport card?
    Thanks, Ken

    kweiss66, Welcome to the discussion area!
    You are in completely the wrong discussion area. You need to post your question in the iMac CRT (G3) discussion area.

  • Failing to get Wireless Internet Access.  Please Help!

    Happy new year everyone! OK so here's my problem:
    I'm trying to use the Airport connection with a linksys WRT54GS wireless router and I'm unable to access the internet. The Airport recognizes the wireless network, says its connected, but I still can't access the internet even after using a static IP address. When I go to Network Diagnostics and fill in the appropriate information, I get green status icons for all but 'Internet.' Even after running system update through a wired connection on the PBG4 thinking I may have had some outdated soft/firmware, I still couldn't connect to the internet. I've put more time into this than I should have at this point and am completely stumped as to how I can remedy this problem. If there's anyone out there that could help me out I'd really appreciate it. Thanks a lot!
    PowerBook G4 12"   Mac OS X (10.4.8)  

    if no one has any solutions, could someone please recommend a 3rd party wireless router that I may have better luck with? Thank you!

  • Complete wireless internet access failure:(

    Ok everyone, here is the low down for the last month.
    I use a 2005 ibook G4, access internet and email set up w/ Mac Mail thru my airport card and jump on wireless cafe that i live next 2. For 3 whole months, i was set up and running internet and email perfectly. I didn't change any setting, service, etc. Except the network from cafe (from linksys to RGII).
    1st: as of 1/1, i lost my ability to send email thru Mac mail using wireless access (thru cafe). Error was "port 25 timed out". After spending 4 days with ISP, setting- resetting POP account and outgoing server, pinging port 25 to verify sent, scanning port 25 to verify, etc, etc, etc. This produced no resolution.
    2nd: as of 1/21, I have lost complete internet access. I have run the network diagnostic to fix, no go...
    SO, I took my ibook to the Genius bar at Apple store for a looksy. Sure enough some setting were off or changed, (by my own troubleshooting). After everything was checked and reset, all was A-OK (at the Store). I could access internet, received AND send email. Yippee!
    NOW here is the tricky part... as soon as i got home and turned her on, I could see the airport finding networks (RGII), But when I try to access email or internet (thru Mac Mail, safari) it says my ibook is not connected to internet, same for email. I run the network diagnostic, and it can't fix problem.
    When I go next door to see if the cafe is having router problems on there end...Nope everyone is accessing the internet just fine:(
    This is NOT a problem with password etc, As the cafe is set up with authentication as NONE. Plus everyone there is able to use the wireless access.
    So what do you propose is my problem? Remember this was all working fine for 3 months and started to fall apart this last month. In addition, to having eveything work just fine at the Apple store a mere 30mins before.
    Could this be an issue with the RGII network i am jumping on?
    Why would I be the only person effected and not everyone at the cafe?
    ibook   Mac OS X (10.4.3)   wireless access at cafes

    Though it doesn't solve your issue, I thought I'd
    share that I can access many non-Apple access points
    (Cisco 1200's, Linksys WAP54G's for example) with OS
    10.4.4. This being so, I think we're safe to assume
    the issue is not related to a recent OS update.
    I'm afraid I must disagree with this. Few months back, I lost my Airport connection when I installed the 10.4.3 System Update. Fixed by restoring from backup and going back to 10.4.3. Managed to upgrade to 10.4.4 successfully and maintain wireless connection to a Compex 802.11g base station. Then I made the mistake of accepting the Airport 2005-001 update. Immediately lost my Airport connection. Other PCs can connect to the base station, and I can access the internet by connecting my Powerbook to the router using Ethernet. Can even see the Airport network and login to the router's admin page over wireless. Only thing that doesn't work is connecting to the internet wirelessly.
    Once I changed my base station to an older one I had lying around, I can connect wirelessly again and all seems well.
    My conclusion is that Airport Update 2005-001 definitely broke compatibility between Airport Extreme and some 3rd party base stations. The irony is that this update was supposed to "improve" compatibility !

  • Z60t wireless/Internet access problem

    I purchased in 2006 at office depot, after a year and a half of using it just stop accessing the internet, I am so desperate since I am not a computer junkie, my needs are simple just to be able to receive and send emails and easy net surfing. I called Lenovo but they are not willing to help since my machine is out of warranty. Please help me, I lost my jo, my home cannot afford to take it to a service location IBM recommends. Thank you.
    Moderator edit: Added description of problem to subject.
    Message Edited by bananaman on 07-12-2009 10:58 PM

    Hi there Bananaman, you are one of those wonderful volunteers out there, anyway, as I have said purchased machine on 06 worked for at least year and a half then quit on me. I cannot access the internet, took it to office depot since I purchsed it from them, they're offering FREE tune up had me purchase a Linksys LAN card telling me the built in wireless netcard had given up on me. Did not help, they sent me home w/ the LAN card assuring me it will work since in my house I have a wide range of wireless internet connection whatever. Did not work either. Called IBM Lenovo only to be declined of tech support because machine not warranty covered. Yesterday, I tried to fix it(LOL) for a miracle to struck me but to my despair. I don't know what to do, I want to take it to service center recommended by IBM but got no green. I am hopeful that, being a member of the Lenovo community, I could find some real help from real people like you. These are the characters I see at the back of my machine I think as the product number, (TYPE  2511 - FEU  S/N  *******   0510) Thank you.
    Moderator edit: Masked serial number to prevent mis-use.
    Message Edited by bananaman on 07-12-2009 10:54 PM

Maybe you are looking for

  • AT Commands , Hyper Terminal and java

    Hi, I have following problem, i have PCMCIA Type -11 Wireless modem.its installed on my system COM4 port. Now first problem is that when i try to connect with hyper terminal to COM4 there is no response from it .It become Idle.but when i connect with

  • Multiple LDAP servers on single  System

    hi, Would like to know if its a good idea to have multiple LDAP servers running on a single System (Hardware) .. 100,000 user base We would like to run the old and new LDAP databases on the same server till we phase out the old LDAP database after mi

  • MPN on MAC OS 10.6.2

    Hello everyone, I am trying to find the MPN to register Iphoto. when I follow the instructions, which are : "if you are using a version of Mac OS X: Click Finder in the Dock. Choose "Applications" from the Go menu. A Finder window appears with a list

  • New windows8 computer won't play music, only videos

    Hi, So I'm trying to set up my new windows8 computer.  I can see all of my music, but when I try to play a song, iTunes chooses a video and plays it instead.  I can see and hear any video.  I cannot play any songs.  I tried checking and changing the

  • How to Install Azure SDK on Azure automation

    i have a powershell script that connect to storage table and read the data from a Table.  which works fine on the local where Azure SDK 2.1 is installed. While i add it as part of Azure automation i get an error as not able to resolve "Microsoft.Wind