Restricted key figure for more than one key figure
hi all
i want to restrict almost three keyfigures based on the same posting period. So instead of creating restricted key figures for each key figures can i create a RKF for all the three key figures based on the same posting period.
Is there any way i can do that.
thanks and regards
vijaykumar
hello Chandra,
if those are the only 3 keyfigures in the query, you can have posting period restricted to the required period in the filter area( if u dont want to the period to be displayed) or else you can restrict the period in the rows/free chars area too.
you can restrict the posting period using variable with period value as a user input value.
If there are other key figures too, then you need to create 3 diffrent restricted key figures restricted for this period.
thanks,
Similar Messages
-
One Key FIgure in more than one column with different restrictions
Hi,
I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??Hi Pravender Chauhan,
If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
Assign points if Useful.
Regards,
Rajdeep. -
More than one key in a Characteristic
Hi there,
I was wondering if it was possible to have more than one key in a characteristic?
I have one with the main key, but then two more, and the text for the characteristic is dependent on all of these. At the moment when i run the DTP to the text table it is erroring as two of the keys are missed out and in some cases the main key has more than one text value.
Does anybody know if this is possible, or a way to solve this?
Cheers
AliceHi,
well not quite sure about your issue. But normally additional key fields for a characteristic are maintained doing a compounding of the characteristic to at least one other characteristic. You can do that in the infoobject maintenance on the tab compounding.
regards
Siggi -
Setting color codes for more than one photo at a time
Is there any way to set color codes for more than one photo at a time?
Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim -
Setting Equalizer for more than one song at a time
Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Authorhighlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.
-
Master_detail for more than one record at a time
Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.BcjThanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj -
Editing 'Media Kind' for more than one song.
Team,
After downloading the newest update, I am no longer permitted to edit the "Media Kind" for more than one item at a time. I need to be able to select an entire album at a time in order to efficiently update my library. I sincerely appreciate your help.I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this. -
Creating SQL-Loader script for more than one table at a time
Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant RaneNo there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need. -
Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time
Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy GhoshThe vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create. -
Can we use same program ID for more than one RFC scenarios
Hi experts,
I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
IPRODUCT type standard table of ZPMS initial size 0,
wa_quote type ZIQMD,
wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
I_QUOTE = iquote .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
I_QUOTE = iquote .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
IPRODUCT = IPRODUCT .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
IPRODUCT = IPRODUCT .
COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh -
Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
at WLSecurityTest.runTest(WLSecurityTest.java:75)
at WLSecurityTest.<init>(WLSecurityTest.java:66)
at WLSecurityTest.main(WLSecurityTest.java:51)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains). -
Help me to search on calendar for more than one year
I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system. I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?
Jens,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
How do people register for more than one person on a form?
We had a lot of complaints last year from organizations who sent several employees to our training. It took a long time for them to process these one at a time. How do people register for more than one person on a form?
Hi thearcca,
This entirely depends on the form you create, you can add multiple choice button and ask for the no. of employees the organization wants to register.
Also, you can add corresponding text field for the names.
Thanks,
Vikrantt Singh -
How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?
If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards -
As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh
Maybe you are looking for
-
PNG files no longer display correctly...PLEASE HELP!
Hi there, I just recently upgraded to Final Cut Studio 2. I have a project that I was working on prior to the upgrade and now making some changes in DVD Studio Pro 4.2.0. In my menus I am using a motion menu as the background and a PNG file created i
-
Grouping text boxes/objects
Hi- 1) I've created a text navbar for the top of the page, consisting of 10 text boxes on a shape, with lines (from the shape menu) between each box. I now want to paste this onto every other page. 2) I've repeated this for the bottom of the page but
-
Can Preview recognize hyperlinks (embedded URLs) in PDF docs?
I've been trying to research this online but I get conflicting answers. Can Preview recognize hyperlinks (embedded URLs) in PDF documents? If it can, then how are those created? I am using Adobe Acrobat Professional v7 (on Windows) and Preview doesn'
-
Web services broke after PHP 5.2.0-3 upgrade
Setting up NEW Intel xserve. Had one little problem with a PHP routine that was written using a newer version of PHP one another xserve. So I'd figured I upgrade the new xserve to the latest version of PHP 5.2.0-3. I downloaded "entropy-php.mpkg," ra
-
How do I find out what my security questions are?
I have tried using a different email and have followed the directions but they keep bringing me back to where I started, I just want to be able to purchase things again!