Restricting a movement type
Hello all,
i need a solution...is there a way to restrict a material for a movement type...here is the scenario..i want to restrict a material for 261 movement type.Is there a way to restrict a material for that movement type..
Hi Srisha,
You can goto transaction "OMJJ".Here you need to put the no. of movement type.
On the same screen under dialog structure,there is a tab for allowed transaction.You can remove those combinations and you won't be able to use those movement types for any transaction.
But this is not advisable
But still if you go ahead with the changes then keep a note of all the transaction so that in future you can revert them back whenever required.
Basis authorization is another alternative
Reward points if it works.
Regards
Karan
Message was edited by:
Karan Bhatia
Similar Messages
-
Can i restrict a movement type with respect to storage location
Hi
Is there any way to restrict the movement type for a particular storage locations.
For eg.
If am using a Mvt 311 tP btwn storagelocations.
If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
Is it possible
Guide me
SunilSunil
Please contact your BASIS security team , with the help of Authorization roles you can restrict
Reward if helpful
Regards
venu gopal -
Restriction for Movement type 202
Dear SAP Consultants,
I want to make the restriction for Movement type 202 by material document.
The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
Kindly give me the details for incorporating it .
Best Regards
Deepak RadeHI,
202 movement type is the reversal movement type of 201 (goods issue to cost center)
when we cancel material document with 201 system create reversal posting with 202
And you can manually enter 202 movement type also in MB1A and MIGO
Now if you want to restrict user to use 202 directly
GO to OMJJ -> select movement type 202 ->allowed transaction ->Remove MB1A and MIGO and save
So you can only cancel a material document of 201 to create 202 not possible to create manually (without reference)
{IF in future needed you can always add those in OMJJ again}
You can cancel material document is through T. Code MBST
This will fully serve your purpose -
Restriction for Movement type 202 - reference of 201 Movement only
Dear SAP Consultants,
I want to make the restriction for Movement type 202 by material document.
The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
Kindly give me the details for incorporating it .
Best Regards
Deepak RadeHello Deepak,
This is SAP SNC SDN forum and your query looks like more of the of SAP MM.
You can post your query in SAP MM SDN forum.
SAP ERP - Logistics Materials Management (SAP MM)
Regards,
Nikhil -
Restriction on movement type,storage location on USER ID
Dear Guru's,
I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
Kindly give ur valuable suggestion to resolve the issue......
With Regards.HI
For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
So its a combination of SLOC & MVT tye. Try & give feedback
Shakti
Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM -
Restrictions of movement types in MIGO
Hello,
When I select goods receipt in MIGO, I would like the system to avoid using 201 movement type. I mean, if I select goods receipt, it should only work for goods receipt
Is there a way that I can block other movement types like this?
I tried to do it from
SPRO->MATERIALS MANAGEMENT -> INVENTORY MANAGEMENT AND PHYSICAL INVENTORY ->SETTINGS FROM ENJOY TRANSACTIONS -> SETTINGS FOR TRANSACTIONS AND REFERENCE DOCUMENTS
and tried to put some restrictions, but it did not work.
Thanks in advance for your help
IremHi
Access to mvt types can be restricted through authorizations. Check with your basis person (auth object is M_MSEG_BWA).
If you want to skip a particular transaction in MIGO then deactivate it in IMG - MM - Inventory management & phy inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO) - Settings for Transactions and Reference Documents. Select the transaction MIGO - click transaction/event (you can deactivate goods issue here or) - Click goods issue - deactivate which ever are not required. You cannot see deactivated options here in MIGO.
Thanks -
Restrict for movement type 201 by material typeu200F
Dear Gurus,
Can SAP restrict movement type 201 by material type?
For example, Can i set authorization for 201 movement type to only material type UNBW material?Check this answered links
Authorization check on movement of material type
Material Type - Movement Type Link -
Hi.. Every body,,,
Actully 'm, a basis consultant , i have problem with mb1b Transaction code..
Myproblem is
i have 4 plants 1,2,3,4 now i want to restrict the goods transfer between these plants like
01---02 -
accepted
0201--
accepted
0103--
not accepted
0104--
not accepted
0203--
not accepted
0204--
not accepted
And 1,2,3,4 plants must transfer goods to vendor
i'm trying by using movement types 301 for plant to plant transfer and 541 for plant to vendor
i have created two roles in one i was restricted company code 1 and 2 with movement types 301 and 541
and in another role i was resricted comany code 3 and 4 with movement type 541 only..
If i give thes two roles to diffrent users it is working fine, but if i give to same user but it is not working..
I don't have functional kw......This is an urgent issue.......please suggest how to restrict..Hi.........T'X for responding imm....
But i have tried ,what u said , still same problem...please provide some more inputs... -
Restriction of movement types at storage Location
Hi Gurus ,
My client requires that no user should be able to use movement type 261 and 262 from 2 out of 5 storage location of a plant .
please let me know how can we achieve this.
Regards
AbhiHi Abhi,
create 2 different roles
1) in the first role give him the Authorization for a Storage Location A and B, and give him all the Authorization for rest of the Mvt Types Except 261 and 262
2) In second Role Give Full Authorization for the Storage Locations C, D and E.
Use the above given Objects and fields.
NO FS and NO Approvals Required in the same.
else it will be going to be a long and complex methord using BADI and User Exit,
and in future you will always have to depend on the Programmer.
This will work for your Scenario.
Regards,
Yawar Khan
Edited by: 1234_abcd on Oct 3, 2011 1:40 PM -
Creation of new movement type for Goods Receipt
Is it possible to create a new movement type same as 101 (goods receipt)? We need to create a separate movement type of 101 for the purpose of separating G/L account to be used for local and importation purchases. Or is there any other way to separate the G/L account for GR of local and importation purchases without creating a new movement type?
You can create new Mvt type by copying Mvt type in OMJJ trxn ..
Please follow the following steps
Check whether you can use the preset movement types.
If not, define new movement types as follows:
1. Once you have carried out the activity, the system displays a dialog
box for field selection. In this, you can restrict the movement
types you work with to various fields. To copy a movement type,
select the field Movement type and choose Continue. The dialog box
Define work area appears.
2. In the dialog box Define work area, enter the movement type you want
to copy in the From: field. In the To: field, enter the name of the
new movement type you want to create. To go to the overview of the
selected movement types, choose Continue.
3. Select the movement type you want to copy, and choose Edit -> Copy
as.
Overwrite the selected movement type with the new movement type
(beginning with 9, X, Y, or Z) and copy all dependent entries.
The system copies all control indicators from the reference movement
type to the new movement type.
4. Check all views for the new movement type and, if necessary, change
the control indicators. Please note that some views have a detail
screen.
5. Copy the reversal movement type and enter it in the view
Reversal/follow-on movement types.
6. Save your settings. -
Authorization object for 351 movement type
Dear expert
Please guide me
How to restrict 351 movement type for created STO for self plant in self plant?
for eg : there are 2 plant 1001, 2001.
STO CREATED IN 1001 PLANT
IN THIS suppling plant : 2001 & Recieving plant : 1001
Now, suppling plant has to do 351 movement type & Recieving plant has to do 101 movement type.
Now my doubt is receving plant should not do 351 movement type.
but it shows that my 1001 plant (receving plant) doing 351 MOVEMENT TYP.
Logically it should not do this.
So , How to restrict 351 movement type for created STO for self plant in self plant?
Regards
SANTOSH KADAM.M_MSEG_BMB
M_MSEG_BWA
M_MSEG_BWE
M_MSEG_BWF
M_MSEG_LGO
M_MSEG_WMB
M_MSEG_WWA
M_MSEG_WWE
M_MSEG_WWF
if your 1001 plant never needs a 351 movement, then dont assign the 351 together with 1001 in these objects for roles that are used in 1001 plant.
But if 1001 needs to perform as well a 351 to any other plant, then you cannot use authorization to restirct it. -
How to restrict the users not to change receiving batch no. in 305 mov.type
Dear MM Guru,
We are using mov.type 303 & 305 for transferring the materials from one plant to another plant. t.code is MB1B (Non split valued item)
While receive the goods through 305 mov.type the user having the chance to change the receiving batch number. To control this changes, is there a way where we can restrict the users not to do the changes in receiving batch no. or can we do the GR with reference to the material document 303 mov.type.
Regards,
SivanandanHi,
Generally there is a possibility to change the batch no. If you want to restrict it means go for enhancement. Use BADI to acheive this.In MB_MIGO_BADI you can set not to change the batch no. Hope it works. Thanking you. -
Restriction of Selecting Reason for movement based on the movement type
HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush -
BASIS--to restrict authorization for a PO document type & 122 movement type
Dear All,
Plz guide me how to restrict authorization for a PO document type & for a movement type 122 i.e. for eg. if a user has authorization for PO document type IC then he should not be able to rum movement type 122 for any T-code he runs.
Thanks in advance
Arpit
BasisHi,
Your request was not too clear to me.. As per my unde
Here is some details of Authorization object related to Purchase Order:
Document Type in Purchase Order( M_BEST_BSA )
Purchasing Group in Purchase Order (M_BEST_EKG )
Purchasing Organization in Purchase Order (M_BEST_EKO)
Plant in Purchase Order (M_BEST_WRK )
Document Type in Outline Agreement (M_RAHM_BSA )
Purchasing Group in Outline Agreement (M_RAHM_EKG )
Purchasing Organization in Outline Agreement ( M_RAHM_EKO )
Plant in Outline Agreement ( M_RAHM_WRK )
This can be helpfull to you to restrict authorization to PO..
In Organization Level, it can be restricted by Purchasing group, Purchasing organization and plant..
Regards,
Sandip -
How to restrict end-user from not using certain movement-types in MB1B
Dear Gurus,
My client wants that end user has access to only particular movement types in MB1B.i.e only to 311 and 412,421E.
They do not want any other movement types to be access by end-users in MB1B
How to go about this requirement?
Thanks in advance
Regards
Ram
Edited by: RAMKUMAR WARIYAR on Jun 27, 2009 2:14 PMhi,
This is possible you can restrict and allow user for movement type which they can do through any t code.
Contact yours BASIS consultant for that
Regards,
Vishal
Edited by: VS on Jun 27, 2009 5:46 PM
Maybe you are looking for
-
I am creating a browser based InfoPath 2010 form Calendar Filtering using SharePoint 2010 Calendar List (All Events) and InfoPath 2010. This form has data connection to the Calendar list. Goal is to compare Calendar Events from Current Year to Previ
-
Error while uploading data!!its urgent
Hi, this is vijay when iam uploading data(transactional data)through flatfile iam getting the error like error in abap program it could not be executed cx_sy_conversion_no_ number the data is not loading into psa also iam doing in developmentside. i
-
PowerMac doesn't recognize AirPort Express
My PowerMac has recently stopped recognizing my AirPort Express. I have a PC/Mac network in my apartment with a WDS wireless bridge consisting of two AirPort Expresses. One is connected to the cable modem, the other to a hub in another room. The comp
-
recently got went through the process of unlocking my phone through itunes, i am now unable to back my phone up to my computer, its asking me for a passcode that i used to unlock it, but i dont have a clue what it is. any ideas?
-
Why no "none" option appears in my iPad 3 while about to download the "free" Facebook app?
Hi I bought today the latest iPad,I am a Greek user,I made an apple I'd,I try for hours to download the free Facebook application from the store but it asks me for a payment method...credit cards which I don't have,after reading in community for the