Restricting absences in the absence type dropdown in Absence Management
Hi friends,
How can I restrict the absence types in the absence type dropdown in the Absence Management. Also can we change how the days are calculated when the "Calculate Duration" button is pressed.
Kindly let me know any ideas so that I can try.
Thanks in Advance
For LOV restriction -
How To Restrict Absence Type LOV in Oracle Self-Service Human Resources (Doc ID 1122674.1)
For calculate duration -
https://forums.oracle.com/message/10752228#10752228
https://forums.oracle.com/message/10460289#10460289
Cheers,
Vignesh
Similar Messages
-
Restriction required on the condition type on base amount
Hi All,
Client want an restriction on condrion type (freight)
Amended Formula : 1.01 * (Basic Price or BPXX + Freight Actual if Fright is less than 20% of BPXX or if more than 20% than restrict it to max 20% of BPXX + Insurance or INS2)
they want freight will not exceed more than 20% if it will exceed then system should restrict.
Regards
SachinHi,
Check in the Pricing procedure V/08 whether any Requirement was set or not.
Also check Whether the Statistical option was set, if it was sest , change it to either Mandatory or Optional.
thanks,
santosh -
My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart the device. But, does not respond to typing. How can I revive the device?
The device was synced to icloud some time ago. The Laptop PC I normally use with the device is not with me now and is being formatted for a different reason.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
What is the process of Leave of Absence?
what is the process of Leave of Absence?
Dear Rakesh,
Below is given step by step to create absence quota creation...
The following is the config. of TM.
IMG --> Personnel Time Management --> Work Schedules --> Define Public Holiday Classes
IMG --> Personnel Time Management --> Work Schedules --> Personnel Subarea Groupings --> Group Personnel Subareas for the Work Schedule
IMG --> Personnel Time Management --> Work Schedules --> Personnel Subarea Groupings --> Group Personnel Subareas for theDaily Work Schedule
IMG --> Personnel Time Management --> Work Schedules --> Daily Work Schedules --> Define Daily Work Schedules
IMG --> Personnel Time Management --> Work Schedules --> Period Work Schedules --> Define Period Work Schedules.
IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Day Types.
IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Day Types.
IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Special Days.
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Define Employee Subgroup Groupings
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Define Groupings for the Public Holiday Calendar.
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Set Work Schedule Rules and Work Schedules.
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Generate Work Schedules Manually
IMG --> Personnel Time Management --> Work Schedules --> Planned Working Time --> Set Default Value for the Work Schedule.
IMG --> Personnel Time Management --> Work Schedules --> Planned Working Time --> Set Default Value for Time Management Status.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Substitutions --> Define Personnel Subareas for Substitution Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Substitutions --> Set Defaults for Substitution Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Group Personnel Subareas for Attendances and Absences.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Define Absence Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Define Counting Classes for the Period Work Schedule.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Rules for Absence Counting (New) --> Group Employee Subgroups for Time Quotas.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Rules for Absence Counting (New) --> Group Personnel Subareas for Time Quotas
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Rules for Absence Counting (New) --> Define Rules for Rounding Counted Absences
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Rules for Absence Counting (New) --> Define Counting Rules
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Rules for Absence Counting (New) --> Define Counting Rules --> Deduction rules for Absence quotas
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Assign Counting Rules to Absence Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Attendances/Actual Working Times --> Define Attendance Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Attendances/Actual Working Times --> Attendance counting --> Rules for Attendance counting (New) --> Assign Counting Rules to Attendance Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Managing Time Accounts Using Attendance/Absence Quotas --> Time Quota Types --> Define Absence Quota Types.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Managing Time Accounts Using Attendance/Absence Quotas --> Calculating Absence Entitlements --> Automatic Accrual of Absence Quotas --> Permit Quota Generation Without Time Evaluation.
IMG --> Personnel Time Management --> Time Evaluation --> Time Evaluation Settings --> Set Personnel Subarea Groupings for Time Recording.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Managing Time Accounts Using Attendance/Absence Quotas --> Calculating Absence Entitlements --> Rules for Generating Absence Quotas --> Set Base Entitlements --> Base Entitlement for Absence Quota Generation.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Managing Time Accounts Using Attendance/Absence Quotas --> Calculating Absence Entitlements --> Rules for Generating Absence Quotas --> Determine Validity and Deduction Periods.
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Managing Time Accounts Using Attendance/Absence Quotas --> Calculating Absence Entitlements --> Rules for Generating Absence Quotas --> Set Base Entitlements --> Define Generation Rules for Quota Selection
If still do you need screens --> kindly click on below link
HCM - Absence Quota Generation
Ur's
Mohan -
How can i restrict the Expenditure Type values at a specific OU ?
Dear Guys,
I would like to ask about the Expenditure Types,
I have implemented two projects for different Operating Units ,
when navigating to any Projects responsibilty,and navigating the Expenditure Type field
the values exist are all the values implemented across the OU not the values entered at this OU
How can i restrict the Expenditure Type values at a specific OU
Regards
Amr HussienHello
When you set up a project there is an option called Transaction Control.
This option allow you to list the allowed or restricted elements of costs for the project.
You may enter the transaction control on a project template and that will be copied to any new project.
The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
Dina -
Restriction of Selecting Reason for movement based on the movement type
HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush -
There is an absence in the inactive period
Hi All,
When I am running payroll for a terminated employee for the current pay period, i am getting the below message. "There is an absence in the inactive period". The pay period is 19/2008 which has the start date as 15.12.2008 till 28.12.2008. The employee is terminated as on 22nd december 2008. In IT 2001, the absence is there for 02nd December. This is already evaluated in the previous time and payroll run.
The error is appearing in the RAB function in the log after importing absences.
This is happening for all terminated employees in New Zealand
What could be wrong?
Any help is appreciated
Thanks!!Hi,
same error is appearing in payroll for other countries as well.
Somehow, SAP doesn't accept recorded absences while the EE is terminated which is quite logical if you look at it from a business persective.
Which company will ever record absences for EE's who are not working for the company.
What I've done before is to add IT2001 in delimit mode (LIS9) to the infogroup for the personal action 'Termination'.
Wilfred. -
Restricting the material types in MM01
Dear experts,
Our client is using few materila types like-HIBE,NLAG,ROH
We have upgraded from 4.6B to ECC6. Now many other material types have come .
While creating material in MM01,selecting the required material type among the many is inconvient.
1)One way of removing the unnecessary mat types is deleting others in OMS2,
The other way of restricting is --
2) I can enter the authorisation group in OMS2 for the required material types and i can assign to M_MATE_MAR object in the required role, but it is not working
Do i need to create authorisation group in any customisation for entering in the OMS2, because what i entered in OMS2 is not displaying in PFCG of the authorisation object under authorisation group.I have checked in SM30 also ,the same authorisation groups under T134 table are updated. Even though,mat types are not restricted in MM01 under material type field.
Please suggest any other way of restricting the display of material types in Material type field of MM01 instead of deleting unwanted the material types in OMS2 transaction
Regards,
DayanandYou can use the material type specific transactionsminstead of MM01, remove the authorizations of MM01 transaction and add the required material type creation transactions
example - Goor Matreials create(special)
HIBE,NLAG,ROH
MMB1 Create Semifinished Product(HALB)
MMF1 Create Finished Product(FERT)
MMG1 Create Returnable Packaging
MMH1 Create Trading Goods
MMI1 Create Operating Supplies(HIBE)
MMK1 Create Configurable Material(KMAT)
MML1 Create Empties
MMN1 Create Non-Stock Material
MMP1 Create Maintenance Assembly
MMR1 Create Raw Material(ROH)
MMS1 Create Service
MMU1 Create Non-Valuated Material
MMV1 Create Packaging
MMVH Create Centrally: Decentral.Shipping
MMW1 Create Competitor Product -
G/L account to restrict the document type selection in F-02
Dear All,
one of my client want that when ever he post any business transaction from F-02 the G/L accounts will determine the document type ,it will resctrict any other documnet type to be used.
for example if their is a payment to bank for bank changes he want only document type BK will come or cash payment only SK will come as default .
If that possible.
Kindly helpGoto TCODE:OBU1
There it is defined for all TCODEs , with default documten type and posting key....
you can change the same as your wish....it is one time as default
but it is cross client config,
and if you want control the document type for seperate transactions...you can control using the validations....that means in case of company code and doctype(sk)....GL should start with 1***series..like
VVR
Message was edited by:
Ramana -
When I change the settings to allow for the content type and page extraction and save it, it shows allowed. When I close the pdf, reopen it, review the security properties, it shows the content type as allowed and the page extraction as disallowed. I need both to stay at allowed, how do make this happen?
The moment that you select not to allow any kind of change done to the file then pages extraction is automatically not allowed as well. There's no way around that.
-
Hi All,
I have written the code, for greater than (GJAHR) 2007 and restricted company codes ( table name = ZGLCCODE).
Here I have written the following the code which is giving an error
In "LOOP ... WHERE ..." the line type of the table must be statically defin
ZGLCCODE Contains only restricted company codes.
Code is as follows
TABLES : ZGLCCODE.
DATA : LT_DATAPACKAGE TYPE TABLE OF DTFIGL_4.
DATA : LS_PACKAGE TYPE DTFIGL_4.
TYPES: BEGIN OF LS_TZGLCCODE,
ZBUKRS type BUKRS,
END OF LS_TZGLCCODE.
DATA : LT_ITZGLCCODE TYPE LS_TZGLCCODE OCCURS 0 WITH HEADER LINE.
DATA : LI_NUM TYPE I,
LC_ZGJAHR TYPE BSEG-GJAHR VALUE '2007'.
SELECT ZBUKRS INTO TABLE LT_ITZGLCCODE FROM ZGLCCODE.
Note: "C_T_DATA" dynamic structure = "DTFIGL_4" structure
*- Remove from the DataSource Company Code -
LOOP AT C_T_DATA INTO LS_PACKAGE WHERE GJAHR GE '2007'.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = LS_PACKAGE-BUKRS.
IF SY-SUBRC <> 0.
APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
CLEAR LS_PACKAGE.
ENDLOOP.
IF LT_DATAPACKAGE[] IS NOT INITIAL.
DESCRIBE TABLE LT_DATAPACKAGE LINES LI_NUM.
IF LI_NUM GT 0.
REFRESH C_T_DATA.
APPEND LINES OF LT_DATAPACKAGE TO C_T_DATA.
REFRESH LT_DATAPACKAGE.
FREE LT_DATAPACKAGE.
endif.
ELSE.
REFRESH C_T_DATA.
ENDIF.
Please give me your valuable suggestions.
Thanks
Ganesh Reddy.Hi Ganesh,
whatever you do, you can try like this:
1 - any code posted should be wrapped in \
then try something like this:
field-symbols:
<tabrec> type any,
<field> type any.
sort ITZGLCCODE by bukrs.
LOOP AT C_T_DATA ASSIGNING <tabrec>.
ASSIGN component 'GJAHR' of structure <tabrec> to <field>.
check <field> <= 2007.
ASSIGN component 'BUKRS' of structure <tabrec> to <field>.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = <field>
BINARY SEARCH TRANSPORTING NO FIELDS. "speed up the volume.
IF SY-SUBRC 0.
MOVE-CORRESPONDING <tabrec> to LS_PACKAGE.
APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
ENDLOOP.
Regards,
Clemens -
Change description of Product Type Dropdown in SRM 7.0
Hello,
We are upgrading to SRM 7.0 and have a requirement where we need to rename the decription of Product type (dropdown) "Materials" to "Goods" on the "Describe Requirement " screen.
We tried modifying the value table COMC_PR_TYPE_T which stores these values however the change did not reflect on the Web dynpro side. This seems to be like a buffering issue however we are not sure.
Does anybody have any idea why system is behaving this way? or is there any other way of doing it?
ThanksHI,
Did you solve the problem? Iu2019m facing with the same issue. Iu2019ve thought also that maybe the AS or the portal buffers the dropdown values, but now Iu2019m not sure about this. Please help, if you know the answer.
Thanks,
Roland -
I need to insert a nvarchar type column with data like 7414;#Butler, Heather into a int type column, but only with the number before the before the character ; in the mentioned string.
In the above case only 7414 needs to be inserted into the in type column of another table. This integer value need not be restricted to 4 characters. It may be 3 or 5 characters too or anything.
Any help is appreciated....Extension of Li's sql
Try this
declare @s varchar(50)
set @s='74146;#Butler, Heather'
--set @s='74;#Butler, Heather'
Select cast(cast(substring(@s, 0, charindex(';',@s)) as CHAR(4)) as int)
--Prashanth -
How to restrict material master by material type t-code MM01
Hi,
how to restrict Materilal master by Material type in t-code MM01
I do restrict by M_MATE_MAR authorization object . After i see there not restrict.
Amit>
sapvinithbasis wrote:
> hi
> plz help me out in solving this issue
> regards vinith
Vinith,
I have explained in great detail exactly what you need to do at every stage. The steps I have outlined are the same that I follow every time that I want to apply material type restrictions.
I strongly recommend that you contact your security admin to help with this, alternatively engage the services of a trained/experienced security admin who can come on site and go through this with you.
If you have done the following then it will work:
1. Assign auth group to material type via OMS2
2. Verified that check for M_MATE_MAR is active
3. Ensured that M_MATE_MAR does not contain the auth group/s which you assigned via OMS2 (that includes *)
This is the last comment I will make on this topic.
Cheers
Alex -
How to View the Doc Types display along with description
Hi All
In ME21N transaction in Doc type tab, only description is appearing, i want that along with technical names, for example li"NB-Standard Purchase Order", like this, so what settings to be done?
Rgds
RameshGo to ME21N trxn Click Alt+F12 > Options > Expert
Here Put Tick in Controls Tab for the following
Show Keys in All Dropdown Lists
Sort Item by Key
Then you will see the Doc types along with Description
Maybe you are looking for
-
Many apps missing after upgrade from iPhone 3gs to iPhone 4?
Hi - I'm trying to troubleshoot for my dad who was lucky enough to receive the iphone 4 today. He says the majority of apps didn't transfer from his iphone 3gs. I did a screen share with him and he's right. The apps are on the old iphone 3gs but not
-
Determine if mouse is over tree node
hi. I recently added some code from this forum on highlighting a node when the mouse is over it. I am taking this futher and setting a Border around the nodehowever it draws a border around every node. I want to only draw the border when the mouse is
-
Checking "Remember Me" Doesn't Work
Whenever me or one of the clients signs in to edit a page we check "Remember Me" and yet it NEVER does, not even once. Have to sign in EVERY time, it doesn't even remember the last user name entered. Not sure if this is related to the issue I had wit
-
Firefox recently started crashing
I am using windows 8.1 64bit These are the past 5 crash reports. I do notice the memory usage shoots up for no apparent reason. Nothing new has been installed on the computer in the past 6 months. Basically only updates are the standard windows, fire
-
Sir, I have my id and pass but I can't change or edit my secret question and answer B'coz when I creat my id I didn't entered 2nd mail option that's why I forget my info about secret question . Naw I want to reset my secret question and answer,plz he