Restricting Ad-Hoc Conferences on 4501 MCU

Does any one know how to restrict Ad-Hoc conferences on MCU 4501 running 4.3(2.18). I don't want just anyone to have the ability to create an Ad-Hoc conference from the Auto Attendant on the MCU.

I don't believe so. Fundamentally there is not much difference between scheduling a conference and then joining it, as opposed to doing an ad-hoc conference on a conversation. Ad-hoc conferences have an 8 hour expiry so you can match that in your
ConferenceScheduleInformation, along with your other settings, and then join it immediately after scheduling it.

Similar Messages

Ad hoc Conference restrictions

I have an India CUCM Cluster that needs to have restrictions on ad hoc conference calls that are being made between three participants (1-India PSTN caller, 2-Internal India Cluster phone and 3-Internal North American Cluster). India law doesn't permit this type of a call to happen.
What is the best way to restrict the India PSTN to be connected to the North American Cluster?
Thanks,
Jim

Hi Jim,
This problem was solved by cisco back in cucm7, the docs can be found here.

MCU Ad Hoc Conference Auto-Disconnect

Dear all,
Is it possible to disconnect all remaning participants from a multiway-created ad hoc conference after person, who create, leave the conference?
Scenario is a person create a multiway conference between 3 conference rooms and after a while leave conference.
I need to auto disconnect other 2 participants.
Is it possible?
Used MCU : 5310 - version 4.4(3.67)
Best Regards,
Mesut

Mesut,
The only way you could do this is by associating the conference creator as the chairperson and the additional participants as guests. Distinguishing between Chairperson and Guests in multiway is not possible.
If you add Conductor this may be possible in the next version with the use of different PINs for chairperson and guests.
Adam

Ad-Hoc conference using TC GUI

I have several TC 7.3 endpoints that are registered to CUCM 10.5 and are able to initiate ad-hoc conferences, using Conductor, by pressing the "Add" button on the Touch 10. My question is, is it possible to do this though the endpoint GUI? Adding a second call in the GUI doesn't seem to do the same thing. I'm assuming because CUCM needs the "Add" button pressed to initiate the ad-hoc escalation to conductor. Thanks Mike

Hi Java,
Thanks for information!
I have the CUCM 7.1.3, only with the MCU and CUCM can enable this functionality?
Regards.
John.
De: javalenc
Enviada em: sábado, 31 de março de 2012 01:18
Para: João Fernando Faria Rosa
Assunto: - Re: Customizing Ad Hoc Conference
Home
Re: Customizing Ad Hoc Conference
created by javalenc in Other Collaboration, Voice, and Video Subjects - View the full discussion

Customizing Ad Hoc Conference

Hi,
I wonder how is possible using an ad hoc videoconference showing in my ip phones and softphones all participants simultaneously in reduced size. I've seen this feature enabled, but I wonder how to enable, wanted to know if I need any additional application.
Thank you!
John.

Hi Java,
Thanks for information!
I have the CUCM 7.1.3, only with the MCU and CUCM can enable this functionality?
Regards.
John.
De: javalenc
Enviada em: sábado, 31 de março de 2012 01:18
Para: João Fernando Faria Rosa
Assunto: - Re: Customizing Ad Hoc Conference
Home
Re: Customizing Ad Hoc Conference
created by javalenc in Other Collaboration, Voice, and Video Subjects - View the full discussion

CCM 4.1 ad hoc conference drops first participant

Hi All,
Not sure if anyone can help here:
My problem is in one of my locations, when a user does an ad-hoc conference using the softkey, and they join another party in to the conference, the first dialled number is being dropped...
Has anyone come across this before? Any known fixes?
Thanks

Hi!
It could be caused by a codec issue. Check what codecs are you using between regions. Remember that if you are using a SW CFB it only speaks G.711 so probably you will invoke a XCODER. If the first user does not have a XCODER on the MRGL on his DP the call might fail.
Hope this helps.

How Can I Disable AD-HOC conference(Meet Now )

Dear
How Can I "Disable Ad-Hoc Conference" in our Organize and Disable Meet now conference in lync client by CS- policies ?

I don't believe there is a way to specifically disable "Meet Now" from the Lync client. Are you looking to disable all meetings, or just those through the Meet Now (ad-hoc) button.
You could use Set-CsConferencingPolicy set the maximum meeting participants to "2" if you intend to disable conferencing altogether. It's probably not ideal.
Is there a specific reason why you want to disable it?
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

"Time Remaining" counter on MCU Conferences page

Hello!
When scheduling a conference in TMS involving a MCU, after the conference starts the remaining time as expressed in the MCU is around 15 minutes longer than what you scheduled.
Is this some sort of padding that TMS sends to the MCU, kind of like TMS considering an endpoint in an ad hoc call as being busy for the next 5 minutes?
This is seen in the following combinations: TMS14.3 (beta)/MCU 4.4(3.54) & TMS13.0/MCU 4.3(2.32)
Thanks!

Hi Kjetil,
If that is the case... then when will the "Audio notifications" from the MCU play indicating that the Conference is about to end in X minutes. Because as far as the MCU is concerned then the conference will only end 15mins after it is scheduled to end by the TMS. Therefore the MCU will not get a chance to play the "Audio notifications" as the TMS will tear down the conference 15 minutes prior. Hence if we have an Audio only participant in the conference they will never hear the "Audio notifications" that the conference is scheduled to end soon.
Below is the definition of the Audio notifications Home > Settings > Conferences from the MCU (MCU 4501) help file
Audio notifications
Audio notifications Allows various audible in-conference features to be enabled or disabled.
The options are:
Conference timing: audible messages to indicate when the conference's scheduled end time is approaching.
Join and leave indications: audible messages indicating when other participants join and leave the conference.
Conference status: audible status messages for example indicating to a participant that he is the only participant in a conference.
Regards,
Mayank

Conference MCU 3511

Hi,
How I can create a video conference in the MCU 3511?. The MCU 3511 has been agregated than conference bridge, and his status is registered in the call manager, in the Media Resource Group has been agregated the conference bridge 3511. In the Media Resource Group List contains tha MCU. And also I had created the MeetMe number. How I star video conferencing in my thelepne IP with Video Capabilities Enable?. Which is the number the users call for initiate a video conference?

To initiate a multipoint call using an IP/VC 3540 or 3510 MCU, the endpoint dials the appropriateservice prefix followed by a conference ID. (The conference ID can be up to 9 digits long.) If a service on an MCU is 40880 for a 384-kbps call, the user might dial 4088011223, the call would be routed to the MCU using the 40880 service prefix, and the MCU would initiate an ad hoc conference with an ID of 4088011223. Users can also initiate a call and invite the other participants by dialing the conference
ID, the invite string **, and the E.164 address of the another participant.
http://cisco.com/application/pdf/en/us/guest/netsol/ns280/c649/ccmigration_09186a00800d67f6.pdf

Basic Conference AD HOC

Hi.
I'm working on a home lab with a cucm 9.x on a amd cpu and i realize that the IP Voice Media Streaming App doesn't work on this amd architecture, when i try to do a Conference between 3 IP Phones a No Conference Bridge message are displayed on the ip phone screen, my doubt it's are completely neccesary the IP Voice Media Streaming App to use the internal DSP of the phones to make a basic ad hoc conference between them.
Thanks, i appreciate your help.

I believe the IP Voice Media Streaming App must be active for your software conference bridge to work per this doc http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmsys/accm-712-cm/a05confb.html#wp1035397

MCU 3515 conference control

Hi, i have an mcu 3515 12 ports, i have already configured the IP adresses of the MC and EMP..etc.
I configured a service that use SCCP, but in the Conference control i can't use this service to create a conference. Does Conference Control of mcu support creation of SCCP conference?

On entering the MCU web page there is an option to enter a conference id in order to view the conference details.
This is not operational.
Workaround:
Log in as administrator or operator. Select the Conference Control button on the left hand side of the page. A new page with a list of the current conferences is displayed. Select the conference of choice to view the conference details.
Try the bug - CSCsh68946

SCCP Transcoders and Conference doesn't register.

Dear Friends,
I having a strange issue, I have configured my 3945 GW with SCCP for Conferencing and Transcoding. Also on the CUCM Side, i have used the Cisco IOS Enhanced media termination Point for this setup but I see the transcoders are not getting registered. I had reset the items from both the sides but No luck.
In the "Debug SCCP all" i do see error 257 in socket.
The configs:
sccp local GigabitEthernet0/2
sccp ccm 19.106.182.15 identifier 2 version 7.0
sccp ccm 19.106.214.15 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/2
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 2 register CFB-12345678901
associate profile 1 register XCD-12345678901
dspfarm profile 1 transcode
description #XCODE dsp farm - G711/G729r8 only#
codec g711ulaw
codec g711alaw
codec g729r8
maximum sessions 30
associate application SCCP
dspfarm profile 2 conference
description Ad-hoc conference - G711 only
codec g711ulaw
codec g711alaw
maximum sessions 8
associate application SCCP
DEBUG sccp all:
Jan 14 15:20:13: sccp_connect_to_ccm_on_priority_basis: Trying connecting to CCM on priority basis prof_id 2, appl_type 3
Jan 14 15:20:13: sccp_connect_to_ccm_on_priority_basis: Trying CCM with ipaddr 19.106.214.15, priority 1, port 2000
Jan 14 15:20:13: sccp_appl_service_start_timer: Start timer type 1 with time_out 30000ms
Jan 14 15:20:13: sccp_tcp_socket_connect: Trying tcp soc connect for appl_type 3, prof_id 2, to ipaddr 19.106.214.15
Jan 14 15:20:13: sccp_get_ccm_intf_vrf_id: ccm sccp local interface vrfid=0appl type is 3, appl profile 2
Jan 14 15:20:13: sccp_tcp_open_and_set_option: Socket 1 opened and binded to addr 19.106.214.15 - for appl_type 3, prof_id 2
Jan 14 15:20:13: sccp_socket_connect_to_ccm :: connecting to port 2000 sccp_socket_connect_to_ccm: soc conn to 19.106.214.15 port 2000 in progressfor appl_type 3, state 1, soc_fd 1 appl 144C622C
Jan 14 15:20:13: sym_xapp_xlate_ccapi_eve: Unsupported ccapi eve 2
Jan 14 15:20:13: sym_xapp_process_ccapi_events: Unsupported ccapi eve_id 2
Jan 14 15:20:13: sccpapp_process_socket_events: appl_type 2, soc_fd 0, soc 0, swb_soc -1
Jan 14 15:20:13: sccpapp_process_socket_events: TCP_SOCKET_READ: appl_type 2, eve 4, state 1
Jan 14 15:20:13: sccp_appl_service_stop_timer: Stop 2064E60 timer
Jan 14 15:20:13: sccp_process_socket_connect_result: appl 2064E08, soc_recv err 257, len -1, appl_type 2
Jan 14 15:20:13: sccp_process_socket_connect_result: appl_type 2, eve 1, soc_id -1, state 1

fingw001-vg3945#sh running-config
Building configuration...
Current configuration : 25223 bytes
! Last configuration change at 13:06:36 UTC Tue Jan 14 2014 by kmohsin
! NVRAM config last updated at 12:22:27 UTC Tue Jan 14 2014 by skarth43
version 15.1
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname fingw001-vg3945
boot-start-marker
boot system flash:c3900-universalk9-mz.SPA.151-3.T2.bin
boot-end-marker
logging buffered 16384
no logging console
enable secret 5 $1$OFF8$8Z8jdwPVNpsGaUg4DYXR11
aaa new-model
aaa authentication login default group tacacs+ enable
aaa authentication enable default group tacacs+ enable
aaa authorization config-commands
aaa authorization commands 0 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting update newinfo
aaa accounting commands 15 default
action-type start-stop
group tacacs+
aaa session-id common
errdisable recovery cause udld
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 60
no ipv6 cef
no ip source-route
ip cef
ip multicast-routing
ip domain list nls.ford.com
ip name-server 19.155.192.72
ip name-server 19.175.128.73
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
dspfarm
dsp services dspfarm
voice call send-alert
voice call convert-discpi-to-prog
voice rtp send-recv
voice dsp crash-dump file-limit 3
voice dsp crash-dump destination flash:dsp-crash
voice service voip
ip address trusted list
ipv4 19.106.182.0 255.255.255.0
ipv4 19.106.214.0 255.255.255.0
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
header-passing
error-passthru
asserted-id pai
early-offer forced
midcall-signaling passthru
privacy-policy passthru
sip-profiles 1
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
voice class sip-profiles 1
request INVITE sip-header Supported remove
request INVITE sip-header Min-SE remove
request INVITE sip-header Session-Expires remove
request INVITE sip-header Unsupported modify "Unsupported:" "timer"
request ANY sip-header Allow-Header modify ", UPDATE" ""
response ANY sip-header Allow-Header modify ", UPDATE" ""
voice translation-rule 1
rule 1 /$^...$$/ /7319\1/
voice translation-rule 2
rule 1 /^103447$...$$/ /7319\1/
voice translation-rule 3
rule 1 /^7319$...$$/ /103447\1/
voice translation-rule 4
rule 1 /^9$.*$/ /\1/
voice translation-profile Internal-to-PhoneDN
translate called 1
voice translation-profile PSTN-to-PhoneDN
translate called 2
voice translation-profile PhoneDN-to-PSTN
translate calling 3
translate called 4
application
package callfeature
param med-inact-det enable
param med-inact-disc-cause 44
param med-inact-action disconnect
global
service alternate DEFAULT
license udi pid C3900-SPE150/K9 sn FOC174198Z0
license accept end user agreement
hw-module pvdm 0/0
vtp domain fingw001-vg3945
vtp mode transparent
redundancy
ip tcp path-mtu-discovery age-timer 30
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/1
description rhost="finfw001" rint="G1/0"
ip address 19.155.95.206 255.255.255.252
duplex auto
speed auto
service-policy input EdgeMark2
interface GigabitEthernet0/2
description rhost="finrs001" rint="G3/22"
ip address 19.155.95.198 255.255.255.252
no ip redirects
duplex auto
speed auto
ip forward-protocol nd
no ip pim dm-fallback
ip pim autorp listener
no ip http server
no ip http secure-server
ip flow-cache timeout active 1
ip flow-export source GigabitEthernet0/2
ip flow-export version 5
ip flow-export destination 19.97.9.164 9995
ip route 0.0.0.0 0.0.0.0 19.155.95.197
ip route 10.80.144.0 255.255.255.0 19.155.95.205
ip route 192.168.13.232 255.255.255.252 19.155.95.205
ip tacacs source-interface GigabitEthernet0/2
ip access-list extended Virus_LAN
deny   53 any any
deny   55 any any
deny   77 any any
deny   pim any any
deny   tcp any any eq 5554
deny   tcp any any eq 8594
deny   tcp any any eq 8563
permit ip any any
ip access-list extended Virus_LAN_PIM
deny   53 any any
deny   55 any any
deny   77 any any
deny   tcp any any eq 5554
deny   tcp any any eq 8594
deny   tcp any any eq 8563
permit ip any any
ip access-list extended Virus_Server
deny   53 any any
deny   55 any any
deny   77 any any
deny   pim any any
deny   tcp any any eq 5554
deny   tcp any any eq 8594
deny   tcp any any eq 8563
permit ip any any
ip access-list extended Virus_Server_PIM
deny   53 any any
deny   55 any any
deny   77 any any
deny   tcp any any eq 5554
deny   tcp any any eq 8594
deny   tcp any any eq 8563
permit ip any any
ip access-list extended Virus_WAN
deny   53 any any
deny   55 any any
deny   77 any any
deny   pim any any
deny   udp any any eq 1434
deny   tcp any any eq 5554
deny   tcp any any eq 8594
deny   tcp any any eq 8563
permit ip any any
ip access-list extended Virus_WAN_PIM
deny   53 any any
deny   55 any any
deny   77 any any
deny   udp any any eq 1434
deny   tcp any any eq 5554
deny   tcp any any eq 8594
deny   tcp any any eq 8563
permit ip any any
ip sla responder
logging trap debugging
logging source-interface GigabitEthernet0/2
logging 19.97.9.50
logging 19.97.9.80
access-list 4 remark - SNMP access for NMS subnet
access-list 4 permit 19.97.9.0 0.0.0.255
access-list 9 remark - SNMP access for HP DDMA subnets
access-list 9 permit 19.106.113.16 0.0.0.15
access-list 9 permit 19.106.113.32 0.0.0.15
access-list 9 permit 19.106.117.16 0.0.0.15
access-list 9 permit 19.106.117.32 0.0.0.15
access-list 9 permit 19.110.113.16 0.0.0.15
access-list 9 permit 19.110.113.32 0.0.0.15
access-list 9 permit 19.110.117.16 0.0.0.15
access-list 9 permit 19.110.117.32 0.0.0.15
access-list 141 remark * Iron class - Interactive Queue (IP Precedence 1)
access-list 141 remark - generic TCP traffic, excludes Internet web & C3P Metaphase Mux
access-list 141 remark - Public Internet proxy HTTP/HTTPS excluded (drops to default queue)
access-list 141 deny   tcp any any eq 83
access-list 141 deny   tcp any eq 83 any
access-list 141 remark - C3P bulk traffic port number
access-list 141 deny   tcp any any eq 4544
access-list 141 deny   tcp any eq 4544 any
access-list 141 deny   tcp any any eq 16016
access-list 141 deny   tcp any eq 16016 any
access-list 141 remark - MX2 Handhelds (intentionally one way)
access-list 141 deny   tcp any range 4000 4050 any
access-list 141 remark - The following permit catches any non-excluded TCP
access-list 141 permit tcp any any
access-list 141 remark - SNMP traffic from NetOps Mgt subnet with CS1 *
access-list 141 permit udp 19.97.9.0 0.0.0.255 any eq snmp
access-list 141 permit udp any eq snmp 19.97.9.0 0.0.0.255
access-list 141 permit udp any 19.97.9.0 0.0.0.255 eq snmptrap
access-list 142 remark * Bronze class - Interactive Queue (IP Precedence 2)
access-list 142 remark - DNS query/response, Pinnacle
access-list 142 permit udp any any eq domain
access-list 142 permit udp any eq domain any
access-list 142 remark - HTTP traffic (within Ford only)
access-list 142 permit tcp any any eq www
access-list 142 permit tcp any eq www any
access-list 142 remark - SSL Web traffic
access-list 142 permit tcp any any eq 443
access-list 142 permit tcp any eq 443 any
access-list 142 deny   tcp any any lt 1024
access-list 142 deny   tcp any lt 1024 any
access-list 142 permit tcp any any eq 8058
access-list 142 permit tcp any eq 8058 any
access-list 143 remark * Silver class - Video Queue (IP Precedence 3)
access-list 143 remark - Exclude low ports to reduce false triggers on
access-list 143 remark client random ephemeral ports
access-list 143 deny   udp any any lt 1024
access-list 143 deny   udp any lt 1024 any
access-list 143 deny   tcp any any lt 1024
access-list 143 deny   tcp any lt 1024 any
access-list 143 remark - Devices allowed into the video queue are trusted
access-list 143 remark at source and mark IP Prec 3.   Adding "precedence flash"
access-list 143 remark to permits excludes unplanned usage of queue.
access-list 143 remark - H.225 RAS
access-list 143 permit udp any any eq 1719 precedence flash
access-list 143 permit udp any eq 1719 any precedence flash
access-list 143 remark - H.323 control traffic
access-list 143 permit tcp any any eq 1720 precedence flash
access-list 143 permit tcp any eq 1720 any precedence flash
access-list 143 remark - H.245 control traffic
access-list 143 permit tcp any any range 5555 5560 precedence flash
access-list 143 permit tcp any range 5555 5560 any precedence flash
access-list 143 permit tcp any any range 11000 11999 precedence flash
access-list 143 permit tcp any range 11000 11999 any precedence flash
access-list 143 remark - SCCP (skinny) traffic
access-list 143 permit tcp any any range 2000 2002 precedence flash
access-list 143 remark - Video & Audio RTCP traffics, MGCP (UDP:2427)
access-list 143 permit tcp any any range 2326 2331 precedence flash
access-list 143 permit tcp any range 2326 2331 any precedence flash
access-list 143 permit udp any any range 2327 2499 precedence flash
access-list 143 permit udp any range 2327 2499 any precedence flash
access-list 143 remark - Secure SCCP (skinny) traffic
access-list 143 permit tcp any any eq 2443 precedence flash
access-list 143 remark - Secure and non-secure SIP traffic
access-list 143 permit tcp any any range 5060 5061 precedence flash
access-list 143 permit tcp any range 5060 5061 any precedence flash
access-list 143 permit udp any any range 5060 5061 precedence flash
access-list 143 permit udp any range 5060 5061 any precedence flash
access-list 143 remark - Avaya IP telephony control signaling
access-list 143 permit tcp any any range 5010 5012 precedence flash
access-list 143 permit tcp any range 5010 5012 any precedence flash
access-list 144 remark * Gold class - Interactive Queue (IP Precedence 4)
access-list 144 remark - SQL*Net
access-list 144 permit tcp any any eq 66
access-list 144 permit tcp any eq 66 any
access-list 144 remark - Telnet
access-list 144 permit tcp any eq telnet any
access-list 144 permit tcp any any eq telnet
access-list 144 remark - Altel TN3270
access-list 144 permit tcp any any eq 1023
access-list 144 permit tcp any eq 1023 any
access-list 144 deny   tcp any any lt 1024
access-list 144 deny   tcp any lt 1024 any
access-list 144 remark - DLSw
access-list 144 permit tcp any eq 2065 any
access-list 144 permit tcp any any eq 2065
access-list 144 remark - SQL
access-list 144 permit tcp any any eq 1521
access-list 144 permit tcp any eq 1521 any
access-list 144 remark - Ford TN3270
access-list 144 permit tcp any any eq 5031
access-list 144 permit tcp any eq 5031 any
access-list 144 remark - Deny multicast and mark lightweight wireless CAPWAP control traffic
access-list 144 deny   udp any 224.0.0.0 15.255.255.255
access-list 144 permit udp any any eq 5246
access-list 144 permit udp any eq 5246 any
access-list 145 remark * Platinum class - Voice Queue (IP Precedence 5)
access-list 145 remark - Exclude low ports to reduce false triggers on client random ephemeral ports
access-list 145 deny   udp any any lt 1024
access-list 145 deny   udp any lt 1024 any
access-list 145 remark - voice RTP packets
access-list 145 permit udp any any range 16384 32767 dscp ef
access-list 145 permit udp any range 16384 32767 any dscp ef
access-list 146 remark * Internet class - Routing Queue (Trust Marking)
access-list 146 remark - Routing protocols: OSPF, EIGRP, BGP
access-list 146 permit ospf any any
access-list 146 permit eigrp any any
access-list 146 permit tcp any any eq bgp
access-list 146 permit tcp any eq bgp any
access-list 146 remark - Lightweight wireless CAPWAP data traffic
access-list 146 permit udp any any eq 5247
access-list 146 permit udp any eq 5247 any
access-list 148 remark * Mcast class - Interactive Queue (IP Precedence 1)
access-list 148 permit udp any 239.80.0.0 0.0.0.127
access-list 149 remark * IP_Video class - Video Queue (IP Precedence 4)
access-list 149 remark - Exclude low ports to reduce false triggers on client random ephemeral ports
access-list 149 deny   udp any any lt 1024
access-list 149 deny   udp any lt 1024 any
access-list 149 permit udp any any range 2326 2498 dscp af41
access-list 149 permit udp any range 2326 2498 any dscp af41
nls resp-timeout 1
cpd cr-id 1
snmp-server community B1K7PD3L RO 9
snmp-server ifindex persist
snmp-server trap-source GigabitEthernet0/2
snmp-server location addr Bldg Abbr"FCEFFI" (7007) Bldg name "Ford Finland & FORSO Address: Plaza Business Park Building Halo Ayritie 24 City: Vantaa Finland 01510
snmp-server contact name ="Jere Vastaki" Fordnet"7319152" Phone"358-9-35170152" CDS"jvastama"
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps entity
snmp-server enable traps fru-ctrl
snmp-server enable traps hsrp
snmp-server host 19.97.9.134 fordsnmp
snmp-server host 19.97.9.135 fordsnmp
tacacs-server host 19.97.9.193
tacacs-server host 19.97.9.202
tacacs-server timeout 10
tacacs-server key 7 1335051718180D2E2223212734364315
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
mgcp profile default
sccp local GigabitEthernet0/2
sccp ccm 19.106.182.15 identifier 2 version 7.0
sccp ccm 19.106.214.15 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/2
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 2 register CFB-FINGW001EU2
associate profile 1 register XCD-FINGW001EU2
dspfarm profile 1 transcode
description #XCODE dsp farm - G711/G729r8 only#
codec g711ulaw
codec g711alaw
codec g729r8
maximum sessions 30
associate application SCCP
dspfarm profile 2 conference
description Ad-hoc conference - G711 only
codec g711ulaw
codec g711alaw
maximum sessions 8
associate application SCCP
dial-peer voice 3501 voip
tone ringback alert-no-PI
description Incoming from PSTN/SIP provider
translation-profile incoming PSTN-to-PhoneDN
session protocol sipv2
incoming called-number .T
voice-class codec 1
voice-class sip early-offer forced
voice-class sip profiles 1
dtmf-relay rtp-nte digit-drop
ip qos dscp cs3 signaling
no vad
dial-peer voice 3601 voip
tone ringback alert-no-PI
description incoming from CUCM-SIP Trunk
session protocol sipv2
incoming called-number 9T
voice-class codec 1
voice-class sip early-offer forced
voice-class sip profiles 1
dtmf-relay rtp-nte sip-notify
ip qos dscp cs3 signaling
no vad
dial-peer voice 4501 voip
description Outgoing PSTN/SIP provider
translation-profile outgoing PhoneDN-to-PSTN
destination-pattern 9T
session protocol sipv2
session target ipv4:10.80.144.10
voice-class codec 1
voice-class sip early-offer forced
voice-class sip profiles 1
voice-class sip options-keepalive
dtmf-relay rtp-nte digit-drop
ip qos dscp cs3 signaling
no vad
dial-peer voice 4601 voip
description Outgoing CUCM-SIP Trunk to CUCM Subscriber 1
preference 1
destination-pattern 7319...$
session protocol sipv2
session target ipv4:19.106.214.15
voice-class codec 1
voice-class sip early-offer forced
voice-class sip profiles 1
voice-class sip options-keepalive
dtmf-relay sip-notify rtp-nte
ip qos dscp cs3 signaling
no vad
dial-peer voice 4602 voip
description Outgoing CUCM-SIP Trunk to CUCM Subscriber 2
preference 2
destination-pattern 7319...$
session protocol sipv2
session target ipv4:19.106.182.15
voice-class codec 1
voice-class sip early-offer forced
voice-class sip profiles 1
voice-class sip options-keepalive
dtmf-relay sip-notify rtp-nte
ip qos dscp cs3 signaling
no vad
dial-peer hunt 1
gateway
media-inactivity-criteria all
timer media-inactive 5
timer receive-rtp 1200
sip-ua
set pstn-cause 1 sip-status 503
set pstn-cause 3 sip-status 503
retry invite 2
retry bye 2
retry cancel 2
timers trying 550
g729-annexb override
gatekeeper
shutdown
banner motd ^C
WARNING! THIS IS A PRIVATE COMPUTER SYSTEM. USAGE MAY BE
MONITORED AND UNAUTHORIZED ACCESS OR USE MAY RESULT IN
CRIMINAL OR CIVIL PROSECUTION.
Except for some privacy rights granted by applicable law,
by signing on to the system you acknowledge:
You do not have any expectation of privacy in your use of the system.
You are familiar with, understand, accept, and will comply with the
provisions of Company Directive B-109.
^C
line con 0
exec-timeout 20 0
password 7 045307225A7364775E4A03
transport preferred none
line aux 0
exec-timeout 20 0
password 7 045307225A7364775E4A03
line vty 0 4
exec-timeout 20 0
password 7 060E0305191C2120524414
transport preferred none
transport input telnet
scheduler allocate 20000 1000
ntp server 19.211.4.1
ntp server 19.211.5.1
end
fingw001-vg3945#
fingw001-vg3945#

VideoConference MCU

In the web page of the MCU, I try to Create a Conference, I select the prefix (default 81 type Video) and I enter the unique number and when I do click in the boton "create" this message is showed: Error: No Resource are available. And the EMP module is registered in the MCU the conference with meet-me and ad-hoc conference works withou problem ... Why happen this ?

81 is for h323 by default.
and probably you use all video ports for SCCP, go to MCU>Protocol>SCCP and check how many ports are assigned for sccp.

Conference calls all of a sudden do not work??

We have a Call Manager 5.1 with MGCP controlled gateways. Out of no where our ablility to ad hoc conference call does not work. We connect the calls and no one can hear one another. Any suggestions as to what could be the cause? Any feed back would be great.
Rgds,
Vicky

Here is the Troubleshooting and Debugging VoIP Call Basics.
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094045.shtml

How to enable Conference Chaining - CUCM 6.1.5

How to enable Conference Chaining on CUCM 6.1.5?
Currently, when Phone A conferences Phone B and Phone C , then Phone B & Phone C cannot conference anyone.
They get the message - "Key is not Active" .
How can we change this behaviour ?

Found the answer - Need to "Enable Advance Ad-Hoc Conference" under service parameters.

Restricting Ad-Hoc Conferences on 4501 MCU

Similar Messages

Maybe you are looking for