Restricting Budget Profile for project profile in CJ01

Hi,
I have a scenario where users are asking to restrict the budget profile for a project profile in CJ01
For example.
Say i have the following Budget Profiles
ZXXXXX1
ZXXXXX2
ZXXXXX3
ZXXXXX4
and
Say i have the following Project Profiles
A1
A2
A3
A4
The requirement is - I want to restrict the following way in CJ01 when I create a project.
For Project profile A1, I want to see only the budget profiles ZXXXXX1 and ZXXXXX2
For Project profile A2, I want to see only the budget profiles  ZXXXXX1 and ZXXXXX3
For Project profile A3, I want to see only  the budget profiles ZXXXXX3 and ZXXXXX4
For Project profile A4, I want to see only  the budget profiles ZXXXXX4 and ZXXXXX1
Can I achieve this? If yes, then can you detail the steps. Please let me know. 
Regards,
MS

Mukund,
Try out puting in a validation as per your requirement.
Regards
Sreekanth

Similar Messages

  • PS accounting & Budget creation for project

    Hi PS Guru's
    I am new to PS, any body has any documentation of PS accounting & Step for budget creation fot PS
    Regards
    PD

    Hi,
    Please refer the below URL for Project accounting.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
    For creating Budget you please follow steps.
    1. Transaction CJ30: Allocate Budget to Projects
    2. Transaction CJ32: Release Budget for execution
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • Budget Report for Project does not work

    Can somone help make sense of this inbuilt report ; Fnancial Reports/Budget Reports/Budget Report - on the Selection Criteria I put under Project - MO project. The result is the Report is that it Shows me the ACTUAL sales for MO project but the BUDGET figure is shown as the TOTAL SALES Budget for the whole company. Also the Operating COSTS shown do not make sense. Does anybody know:
    1. Where are the Opreting Costs for the Budget come from since the ACTUAL figure for SALES is correct but the OP COSTS are not
    2. The PROJECT budgeting and its Budget Setup are not clear to me so please give detailed explanation
    Thank you
    Robert

    Hi,
    Please gothru' you earlier thread relevant to budget hope that will meet your requirement and clarify you doubt.
    Let me know you want more details.
    Regards,
    Venkatesan G.

  • Budget Exceeded Issue - Activated budget profile for existing project

    Dear Experts,
    I have a Project and not using any budget profile, already actual data exist only in CJI3 no data in CJI5.
    Now I assigned Budget Profile in that project.
    While entering Budget in T-code CJ30, I can see values in assigned values for a wbs elements.
    Example -
    WBS Element - XXXXXX-02  - 2000 (Assigned) - Here Budget Profile not assigned in the project
    Same WBS Element - Once Budget Profile assigned, when am assigning same 2000 budget am getting budget exceeded issue.
    If I give 2500 I am not getting any errors, My tolerance as only Warning message.
    Please Suggest - Screenshot attached
    Thanks,

    Hi Pavan,
    As soon you enter your budgeting fig the availability control triggers, this check your assignment with available budget.this the reason you are getting error as you say there are already actual posting in CJI3.In this you need to balance first the fig which is appear in assigned column in CJ30.
    Its a good practice to give budget first release it & then start procurement,confirmation etc.
    Check this in budget profile availability control.
    Regards,
    Sachin.

  • Planning/Budget Profile always required for Project Profile?

    Hi,
    Are planning and budget profiles always required fields for Project Profile?
    Thanks!
    Regards,
    Vivian

    Hi,
    Thanks for your reply.  May I know if you could advise relevance of the planning and budget profile?  what if I do not specify them in my Project Profile? What will be the impact or default values if they are not specified in the project profile.
    Thanks!
    Regards,
    Vivian

  • PS: Setting Project Profile as a mandatory field for Project Definition

    Hi,
    I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01).  I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc.  Would appreciate if you can share your expertise on this.
    Thanks!
    Regards,
    Vivian

    Hi,
    I would like to know how to include some additonal fields in OPUK/OPUJ.  We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ.  We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
    Thanks!
    Regards,
    Vivian

  • Assigning budget profile to already existing project

    Hi All,
    Please suggest how can we assign budget  profile to already existing project .

    Hi Vishal,
    You can go the Project builder, open the particular project and in the detail screen of the project definition, enter the budget profile in the control data tab page.
    Or goto SPRO->Project system->Costs->Budget->Stipulate default budget profile for Project definition and assing the bedget profile.
    Or enter the Budget profile in the Controlling tab page of the Project profile.
    You can do all these for existing projects.
    regards
    Pratap.V

  • User exit for budget profile per comapny code

    Hi Gurus,
    We are having around 100 company codes in our system. They all using same internal order type for creation of internal order for capital projects.Now for one of the company code I want to have a budget profile by using same order type.
    Can anybody help mke with a functional module which I can use to maintain budget profile per company code using existing internal order type.
    Thank You

    Hi,
    Budget profile is maitained on the level of order type. You have to define it there. Are these companies maintained under one controlling area?
    Regards,
    Eli

  • Validation for Project defination and project profile

    Hello,
    I have to create validation for Project Definition and Project Profile.User requirement is when the project (Exp: Z/0120) is creating with project profile Exp: Z0001_Z system should allow , If user is trying to select other than this profile system has to give the error.
    I tried below validation but it is not working:
    Prerequisite - PROJ-PSPID = 'Z'
    Check   -  PROJ-PROFL = Z0001_Z
    Kindly any suggest how can i give the validation for the same.
    Regards,
    Lakshmi.
    Message was edited by: Mohamed Rafi - Many threads available on this topic search for those.

    Hi,
    Have you tried to save the project? Because validation rule will call at time of saving the Project.
    I have created the same but for start with 'U'
    When I create project and at time of saving, validation rule will call and system throw error if I don't create project start with 'U'.
    Now If I am creating here, start with 'J'. System  is throwing error as per validation rule.
    Also Pl check if you have assigned same correct rule on project profile.
    Regards
    Shishir

  • Planning Profile for Project System

    Dear All,
    In planning Profile (T Code OPSB) for Project System we can find  RElem.f.billing plan ..field, in this field which cost element we have to assign wheather it is sales revenue or secondary cost element cat.31 or else..plz adives me..
    Thanks and regards

    Mr. Sridhar,
    Thanks for ur reply, here my querry is, i have types of sales revenues like domestic, export, industrial etc.. there is only option is there to maintain revenue cost element, so which revenue cost element i have to maintain in planning profile.
    Regards
    Ramesh

  • Maintain Budget Profile for PM Order Type

    Hi,
       While trying to maintain the budget profile in Order types, budget profile couldnt be found for PM orders order type like PM01, PM02, etc., Order Types configuration has the budgeting profile. But still its not coming in KOAB where budget profile will be maintained for order types.
    Please provide me the solution.
    Regards,
    Maheswaran.
    Edited by: Maheswaran.K on Jul 29, 2009 1:38 PM

    Hi,
        Budget profile has been maintained in OIOA. But its not coming in KOAB.
    Regards,
    Maheswaran.

  • Assign plan/budget profile for internal order

    i just tried to use T-code KO22 to do change budget for an order, but error msg show 'Assign a plan or Budget profile to the object'.so i wonder how to create the plan or Budget profile and assigned it?  waiting for your answer....

    Hi,
    maintenance for budgeting profiles: T-code OKOB
    assignment to internal order types: T-code KOAB.
    Best regards, Christian

  • Bapi for Project User Status Profile

    Hi,
    Is there any bapi that contains the field "Status Profile (STSMA) of the Project? I only can find the WBS status...
    Thanks in advance.
    LM

    Hi,
    Thanks for your reply.
    But this function is to get the status... The problem is when creating a project by BAPI, the "user status profile" field (STSMA) is not available to fill. In this case, it happens if we have 2 schemes for projects, the bapi only puts the first that appears and I want the 2nd one to be fullfilled.
    How can we create a projet by bapi and have this field?
    Thanks in advance,
    LM

  • Project Profile & Budget Profile

    Hi Experts
    If i want to copy a Project Profile , is it required to create a new Budgeting profile or the same profile will be updated in New one?
    regards
    pallavi

    you can copy new project profile via OPSA txn--> select the profile which you wanted to copy --> F6 --> give the different name there.
    The same way  you can copy the profject profile via txn OPS9.
    By not defining Budget profile in the your project profile you will be able to selet the budget profile while creation of project.
    Regards
    Nitin

  • Budget check for PM orders with main and sub-projects

    Hello
    We have a scenario wherein we have created a main project and a sub-project. We have linked the sub-project to main project. We have also assigned budget to the main project. We have created a PM order wherein we are trying to enter the costs by entering the hours of work. We have configured the budget profile and set the tolerance limites and assigned to main project. The requirement here is we need to have have costs check againt the budget that been available in the main project. But the system is checking the budget of the sub-project. Please share if any specific setting is required to check the budget of main project instea sub-project.
    Regards,
    Basav

    I also double checked, you are right there is no forum for PM, I dont think I could suggest much since there isnt a dedicated forum, but you can try posting this query in the ABAP forum probably some abap'r who has worked with PM module should have a look. Also if possible try to connect with one of the moderators out here and ask for assistance in starting something for PM
    Thanks,
    GLM

Maybe you are looking for

  • Firefox always uses the same session id

    Hi, our company changes standard browser from IE6 to Firefox 3.5.10 . Now we have  great problems with with our ColdFusion application when running it inside Firefox ,because Firefox doesn't create new session id when working  in two tabs or two wind

  • How to split TOs

    Hi, I need to split TOs I found exit EXIT_SAPLL03A_012. As parameter I have table T_LTAP_VB and I would like for example split 2 lines into 5 TOs but don't know how. Could someone give an example how to do this. Please help. Best regards, Greg.

  • Airport extreme stopped recieving signal

    I recently installed a bunch of music software, mostly digidesign 002 plug ins etc, and up until today everything seemed fine - now i can't get any signal on my airport. I've tried lots of stuff but to no avail. anyone got any ideas? g5 1.8 pci   Mac

  • The Do not Disconnect sign and the Disk Mode

    Hi. I fully understand the reason for the "Do not disconnect" sign and the disk mode, etc. However there are a couple of things that bug me. I prefer to keep my ipod permanently connected to a power source (USB port). Now, every time there's a USB ev

  • What do I do when you have purchased a song from itunes but doesn't let you play it

    I got a song from itunes but when I play it it says that I have to authorize on my computer and then it gives me a message that my computer is already authorized but won't play the song.