Restricting Change of Routing without a Change Number

Hi Techies,
In BOM we can restrict the change of a BOM which is already changed by a change number. Is there a same way using which we can restrict the change of a routing which we have changed once with a change number. The client does not want any engineers to change it without a change number.
Can you please advice on this.?
Thanking you in advance.
Regards,
Kris.S

Hi Techies,
Thanks for your reply.
I checked the setting in OP5A. I was able to make the field for change number mandatory. But i want to make it mandatory only after a Routing is changed with a change number.
Until then i don need to make it mandatory for history requirements.
Is this possible just like assing the field C_STUE_NOH to the Routing transaction and making it No (") and mandatory for changing routing with the change number?
Is this possible?
Thanking you in advance.
Regards,
Kris.S

Similar Messages

Error when I change the BOM without a change number

Hi,
I would like to receive an Error when I change the BOM without a change number.
I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
In change the message type I dont have the really message number in the liste.
How can I create a new message (045) so that I get an error by changing the BOM without a change number.
Thanks

Dear Dede,
check for the Authorization Object C_STUE_NOH for the
particular User Id's for which you want to Create or Change a
BOM without a Change number.
So assign this Authorization Object under all user id's for which
you want to have this control.
Adding the mentioned Authorization Object in particular User
Id's will resolve the problem.
This can be done using PFCG T code by adding in particular
Roles.
Revert back incase of any clarifications.
Regards
Mangalraj.S

Routing Process in Change Number !

Hi Folks,
I am new to the PP module.So, I want know what is Routing ? How it can be created ?
And what all the dependencies one has to look for while creating ?
At the same time I have one issue regarding CN (Change Number ).
1. My Client is having one CN with the N number of routings associated with it.
2. I want to change effectivity of one routing among these N to current date.
3. Also I want to change another routing effectivity among these N to specific date.
4. After doing 2 & 3 I am updating the CN i.e. Change Number.
But when I update the CN all the other routings are also getting updated, which i do not want to happen.If I do not update the CN , changes made to the routings are not getting updated.
So, if any one has a answer for the above , please let me know.
Thanks & Regards,
R V Kulkarni.

hi,
Routing is one of the master data used in PP module.
For detailed explanation, pl. follow the link
http://help.sap.com/erp2005_ehp_04/helpdata/en/7e/d42611455911d189400000e8323c4f/frameset.htm
Madhava

How to Change BOM and Document Lab/office only without using chagne number

Hello expert.
Is there any Function Module for change BOM and DOCUMENT lab/office only without using change nuber. or
Please let me what are the tables i have to update for change BOM and Document Lab/office in report.
Regards
srinivas

Nirav,
The Integer type UDF is the answer.
If you have a large amount of values to convert, you might create a new Integer UDF ("UDF_INT"), and use a GlobalChange to move them. Example: where "UDF_NUM" is not equal to " ", "UDF_INT" = "UDF_NUM".
This will put your values in the new field without decimals.
-Tom

The dealer changed our plan without letting us know about disadvantage.

An authorized dealer changed our plan without letting us know what is going to be changed, and we didn't even know they are changing our plan on new contract, we just found out, they do not want to answer. I want to know if we can get back our old plan, as the contract was signed under false information.
This is the story happened today:
My mom, is the master holder of our VZW account, we've been using verizon for years and years, and we first got our smartphone when Verizon just started selling iphone 4, we ordered it online when it was just released.
The plan we had was family plan with unlimited data.
We did not used data that much for the most of the time, but we did used it a lot for some month - thanks to unlimited plan.
We were trying to keep our unlimited data plan, even when my mom lost her iphone 4, she didn't connect with her old phone (not the smart one) so that our unlimited data plan would not be changed.
The dealer we made contract for iphone 4 has moved, or disappeared, i don't know, so my mom had to find another verizon dealer who speaks Korean,
because she doesn't speak English at all - but she's the one who take care of the bills and this kind of stuffs as she has more available time than me.
I wanted iphone 5 when it was released, but wasn't really sure about paying for it to get upgraded because iphone 4 was doing pretty well enough for me.
Then she found this dealer in Korea Town ( Ultimate Wireless - at 6th), and she told me that they could get us the newest smartphone only for $75 -
iphone 5 for me, and Samsung note 3 for her.
I was like - 'Samsung maybe offer some sort of special rate, but I'm pretty sure Apple wouldn't sell their just-newly-released-phone for much low price than 2yr contract price.'
and my mom was like ' i don't know but they said they can do it for sure' - so i was like Ok, why not .
I guess that's about an year and half ago.
Now iphone 6 is here, and i looked up on my verizon account and Sadly, my contract ends next May or something.
So I told my mom about Verizon's iphone trade-in offer and I feel sad about that I am not eligible for it right now.
My mom happened to visit this dealer again to add a new line in our plan, and she asked about that trade-in offer and mention that her daughter (me)
is sad that she is not eligible.
And that evening, my mom told me that they said they can do this trade-in thing for me.
and i was like what? how?
and she was like 'how do i know? they said they can do it so just told me to bring the old phone'
Well my mom, is 54 years old Korean born woman, who doesn't know about technology, English, or any complicated stuffs.
She doesn't even know what the term 'trade-in' means, so that I even had to explain her like it's an offer from verizon you give them old iphone 4 or above, and they give you $200 certificate. But only for new 2yr contracts.
She was like 'well, she said she ordered it already so just go pick it up'
She normally picks up the phone for me (since she's always around K-town, but im not) but today, I happened to have free time on afternoon, and she had some appointment so I had to go visit the dealer to pick up the phone.
So I went in, they were nice and kind, recognized my mom by mentioning her name.
She, the dealer, was a bit busy helping out other customer so I had to wait for a while -
While i was waiting for her, I just looked around inside of the store - like TV screens promoting new phones, and new plans and stuffs.
Finally she got back to me and brought out the iphone 6 from back -
and she was like
'Not sure if you know, but your contract has not been end - so it's going to be like returning and getting back with the EDGE' (speaking Korean)
If i didn't see the 'EDGE' plan stuffs from the TV screen, i probably would just go ok- ok- ok- thanks.
But when she just mentioned 'EDGE', i felt something is not right.
so I asked her, what exactly the 'EDGE' is, and what is being changed.
she hesitated a bit -and said
'Um... so you now have 6 GB data.. and ..'
i was like what? no no. we have unlimited data plan since our very first smartphone - and we never changed plan and tried keep the plan when even we lost one of our phone.
then she was like
"um...but..it seems like it changed.."
SO i asked When did it changed.
and she was like "i don't know. But you guys use only 3GB anyway"
I was like ' well, that's not important how much we actually use our data. the thing is we never changed our plan to keep the unlimited data plan'
and she just ignored it and move to next issue - setting up the new iphone 6 for my number.
she was like 'You don't need to give us the old phone. the payments will be billed to your statement and it's going to be.."
She was saying everything quickly and just briefly in Korean. She sounds like YOU DON'T HAVE TO PAY ANYTHING FOR THE PHONE.
I didn't even know there is such thing like payment plan for buying a phone BEFORE I saw it on TV SCREEN while i was waiting.
And those promoting screens was made in English, while most of their customers are Korean who doesn't know English much.
and i was like "what? what payment? Are you saying I don't have to pay for the phone OR are you saying I'm paying for the phone every month?"
She was like " uh... I mean.. there's certain payment amount you are paying for iphone 5 currently, and this plan, there will be about $10 difference for the phone payment...and.."
I'm a person who raised in Korean till highschool I speak Much better Korean than English, but I was hard to understand what she was exactly saying
because she was saying everything so complicated.
So I tried to clarify: "Ok. so this phone - I am not getting it for free. Right?"
then she was like 'uh...yes - it's now free but you don't have to pay anything right now'
So I clarified again " so that means, I'm buying the phone. not free. right?"
and she was like "uh..but it's not that you buy this right now. It's about $30... so.."
She then was saying this very unclearly so that she sounded like the phone only costs $30.
"then why did you tell my mom that you can to trade-in deal for me?" I asked.
then she was like "I didn't tell her I can do trade-in. It's not trade-in"
So I told her" OK, as you know, she doesn't know about anything about this kind of stuffs. she doesn't even know the word 'trade-in' in English. She said she asked you about we bringing you the old phone and you get us $200 gift card so we would use that card to buy iphone 6 and she told me that you said YES YOU CAN DO IT, SO BRING THE IPHONE 4"
She paused for a while, and I asked her again "and what's up with the change of plan? Our plan was unlimited data. Did you tell my mom about changing the plan? If she knew plan's being changed, she would not do this with you, or she always asks me before signing a contract if there's any change. All i remember is you are getting us decent phones only for $75. How can you explain about this?"
I was amazed after hearing her answer
"I don't know"
and her kind attitude was gone, she was like 'i don't have nothing to do or say'
I was so mad, told her to cancel the iphone 6, and I just left the store.
I'm not a person related to the law, but I've met some lawyer few times with my friends, and I remember hearing this story about fraud -
although the customer signed the contract on a stack of paper with small letters saying all about the terms and condition -
if the customer was been told differently than the actual contract info by seller,and the seller took advantage from it, then that could be counted as fraud.
I felt so conned and so sorry for my mom. I told her the story and she's mad, too.
My mom and I will look up the old statement and check records to see if we were paying for our phone during current contract and visit the dealer again if we find something odd.
But as from the story above, the dealer goes like she doesn't know anything about plan changes (even it was something she did) - so I don't really wanna talk about it with her.
So I was wondering if anyone knows if it is possible to go back to our old plan in the case when the plan was changed without user's acknowledgement.
Sorry to let you read this long story, sorry about temper.. but does anybody have idea on this sort of cases?

yes I knew it was too good to be true, so i was worried but their answer was don't worry it can be done, we are the authorized dealer.
If they fully told us about it, I wouldn't even upgrade my phone and just kept it up with my iphone 4 which I think is still working good for me.
ahh... I just feel so bad
I mean i might be ok with 6gb as we actually don't use that much for the most of the time, but still. This is wrong.
And they tried to do exactly same thing again. and just ignored the issue when I brought it up.
The reason I'm mad and want to get back my old plan is mainly because I feel we've been conned and lost something that we would not have lost without knowing it - and they knew about it all but hid it.
I don't know.. not just about losing the plan... but I think this is so wrong.

Change the routing assigned to a job by program

Is there an API, or any procedure which allow to change by program the routing of a WIP job (validate the changes and replace the primary routing which imply replace the old operations and resources by the alternate routing resources and operation, and reschedule the job) ?
The purpose is to Mass change the routings on jobs (for example: change the routing of all the unreleased jo of an item category).
Thanks in advance.

You have to:
- eliminate the stock of that material/batch
- mark the batch master with deletion flag
- archive the batch master
http://help.sap.com/erp2005_ehp_04/helpdata/EN/eb/650362e5a511d285ed0000e82013e8/frameset.htm
After archiving you should be alble to do a GR with same batch number for another material...hopefully...
Edited by: Csaba Szommer on Jul 19, 2010 8:31 AM

When oracle invalidates result_cache results without any changes in objects

Hi all!
On our production servers we have simple function with result_cache, like this:
create or replace function f_rc(p_id number) return number result_cache
is
ret number;
begin
select t.val into ret from rc_table t where t.id=p_id;
return ret;
exception
when no_data_found then
return null;
end;
/And its results frequently invalidates without any changes in table or
function. I found only 2 cases when oracle invalidates result_cache
results without any changes in table:
1. "select for update" from this table with commit;
2. deletion of unrelated rows from parent table if there is unindexed
foreign key with "on delete cascade".
I test it on 11.2.0.1, 11.2.0.3, on solaris x64 and windows. Test
cases: http://www.xt-r.com/2012/07/when-oracle-invalidates-resultcache.html
But none of them can be the cause of our situation: we have no
unindexed fk, and even if i lock all rows with "select for update", it
still does not stop invalidating.
In what other cases this happens? Am I right that the oracle does not
track any changes, but the captures of the locks and "commits"?
Best regards,
Sayan Malakshinov
http://xt-r.com

Hmm.. Do you about our situation or about test cases with "select for update" and "fk" too?
I'm not sure that it is a bug, maybe it's an architectural approach to simplify and reduce the cpu load?
Best regards,
Sayan Malakshinov
http://xt-r.com

I changed my router password, now I need to login each time....

I have a MacBook Pro and recently changed my router password (from ASCII to HEX). Now my MBP recognizes the wireless signal (full strength) but I cannot pull up web pages without re-detecting my network and typing in the new password. A minor annoyance, but it would still be great to have it back to where it would remember the password.
Thanks,
John

Changing the keychain worked the first time that I did it, but has not worked since. I still have to find my network and re-login. I also checked my keychain to make sure it was remembering the correct password.

Router reference keeps changing itself **even after locked

Greetings!
my partners ibook is possessed! We recently changed the router numbers when we got new setups here at the shop and we had to change the router number to xxx.xxx.xxx.3 instead of .1. Every time my partner steps away from his computer for some reason the configuration of his computer reverts back to .1. Every time he sits down to work he has to go through the whole configuration screen where he chooses "manually" and enters his IP address (which always satys the same) and the new router number and then changes it back to "with DHCP" and then the router number is .3. Then he clicks on the lock mechanism at the bottom left of the config screen to stop any further changes ... and then he can get on the internet. But then he walks away for half an hour and when he returns he cannot connect and he has to go through the whole rigamarole again. Why is this happening to him. He is 10.4.11 and it is an ibookG4.
How can we made the settings for that router stay at .3 and stop erverting to the .1?
thanks
YIPES :: kt

New problem now.
Now he can't get onto the internet if we set it up that way.
We change it to manually, we put in the IP address, and the router and he does not have access to the internet. He needs it to do ordering and the like so it is a thing he steps over to at least ten times a day.
BUT
if we go through the whole rigamarole and he changes everything in the "manually" screen and then he changes the drop down menu to "with DHCP" the router address stays at .3 and then he is able to access the internet. BUT it changes after a few minutes back to .1 and he has to do it again and again. He always clicks the "lock changes" button but somehow it still changes.
Is there a preferences pane I should delete somewhere?
kt

Office 365 AAD Password Writeback not working; Event Viewer Error: 0x80230619 (A restriction prevents the password from being changed to the current one specified.)

Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.

Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved.

I am suddenly using my data download without any changes to my normal usage why?, I am suddenly using my data download without any changes to my normal usage why?

Why am I suddenly using most of my data allowance without any changes to my normal pattern of usage. Never had this problem before and have been using iPhones for a number of years now!

go to settings>cellular>toggle off the apps you dont want your phone to use data

Changing wireless router password for my wireless printer

How can I change my new wireless router password without connecting a usb cable ?
Thanks

We have no idea since you don't mention what printer you have. Also if you want to change your router password you con't use a USB cable. Must use Ethenet cable or wireless connection.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

When I burned an album that had pictures from 3 cameras that I rearranged the cd came out in camera order not my rearranged order. Can this be fixed without manually changing the cd?

When I burned an album that had pictures from 3 cameras that I rearranged the cd came out in camera order not my rearranged order. Can this be fixed without manually changing the cd?

No.
How did you arrange the shots in iPhoto? In an album, manually?
Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.
Regards
TD

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone.

I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone. Txt msg is disabled on iPad. I have no idea what to do. I called the support line that I Pay $9.99 a month for. They told me to delete my iTunes account. Will I lose all my pics on my ipad? I have no music download. I'm getting ****** at this whole thing. And it allllllll started with apples update to the ios7.... I HATED IT. Help.

What your iPhone using friends label your phone number in their contacts is irrelevant. I don't know who you pay $9.99 a month to but it's not Apple. You can't disable text messaging on your iPad as it is not capable of SMS.
Do you still have the iPhone? If so, log out of iMessage on the iPhone.
Try this:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
Also, try changing the password on your iTunes account.

Restricting Change of Routing without a Change Number

Similar Messages

Maybe you are looking for