Restricting for creation or PO for material with other purchase group

Hi,
We have one requirement we want to restrict the user for creation of purchase order for the materials which is not in there purchasing group
on ME21N in order data we enter the Pur. Group e,g 101 and if user enter the material XYZ for which the purchasing group is 102 system should issue the error message for this, so what setting can be done for this
regards,
zafar

the purchasing group in material master is just a default for requisitions that are created via MRP.
user can enter whatever purchasing group they want in a requisition if they create one manually.
the buyer usually looks in his worklist e.g. in ME57 by selection all requisitions that are assigned to him.
However, if the buyer 101 is the holiday replacement to 102, then the general concept allows that buyer 101 can pull the requisitions of buyer 102 and change the purchasing group to 101 in the PO.
If you dont want that, then restrict authorization based on object M_BANF_EKG (purchasing group in requisition)

Similar Messages

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Searching for material with material group

Hi Friends,
How to get the old material no. material no., description after searching for material with material group.please reply....

SE16
table MARA
field BISMT is the old number
MATKL is material group
table MAKT
MAKTX description
you can make a query join with MATNR
Best Regards

How to add an app to the 'recommended applications' list for 'open with other' in finder?

How can I add an app to the 'recommended applications' list for 'open with other' in finder?
Specifically, I have Final Draft 8 and Final Draft Tagger 2.
Final Draft Tagger 2 is used to manipulate and create scheduling information for movie scripts written using Final Draft.
It is NOT on the Recommended Applications list when using Finder to open a .fdx file using 'Open with Other'.
I've modified the info.plist for Final Draft Tagger 2 by copying the entry for Final Draft Documents from Final Draft 8 and removing the original entry, which differed. I then rebooted the machine and was saddened because it did not work.
Suggestions?
Thanks,
Mike

That's not useful.
I want to add a app to the recommended applications list so I don't have to waste time doing this every time I want to use the app on a file.
I thought my question made that clear.
Any suggestions for doing this?

Same Material with different itemcatagory groups

We have 3rd party manufacturers that make product for company and sometimes they send the finished product back to company and other times they will drop ship it to one of our customers.
this scenario we need to have the same material with different itemcatagory groups
i tried to create same material with different storage locations, but it's possible but the thing is when i change the item catagory group for the material , the same is applicable for 2nd same material, my requirement is i need 2 different itemcatagory for the same material, hope u understand my requirement
i will be expecting your possible replys.
Thanks & Regards
Venkat.Dhanemkula

Hi Venkat..
Please explain it more clear manner..
With whatever i have understand, i think you scenerio is manual 3rd party order processing.
In that case the material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing.
Keep only one material and specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
hope it helps you.
Regards
Harry

WRP1 considering Articles with different Purchase group

Hi
Gurus,
We
are facing issue in WRP1 program, in production system one STO is created
for many articles with different purchase group with same site,
But
My understanding is that when replenishment happens, different STOs will
be created for different purchase group for same site and client is also
expecting same thing...
Issue
- In STO articles are belongs to same site but different purchase
group, in PO header its updated purchase group as 002 but if check line items
Articles are from many purchase group like, 001 , 002 , 003 etc....
When
in header its showing purchase group as 002 it should consider articles
with same purchase group but its combining all articles belongs to same site
irrespective of purchase group.
Kindly advise
Regards,
Vinay

Hi Vinay,
It's standard system behaviour. PO group on header level is for reporting purposes, it's not scoping the allowed articles on the item lines. Therefore, WRP1 creates the STO with a mixture of articles of several purchase groups.
Perhaps this apporach might be feasible for your challenge:
- In stead of creating STO, create purchase requisition as follow on document from WRP1 processing (see Store Order Control in SPRO);
- after WRP1 processing, run ME59N (also possible in background) for the purch. reqs. created in WRP1 with the parameter 'Per purchasing group' (and perhaps also 'Per site'). This should result in STO's per site/purchase group.
Regards,
Johan

Purchase Requisition with wrong purchasing group - release strategy

Hello
There is a lot questions about release strategies but I cannot find answer.
I have release strategy based on:
- Plant
- Purchasing Group
If I create Purchase Requisition with right purchasing group release strategy is assigned to PR item.
When use wrong purchasing group - release strategy is not assigned.
How to easy set control if user use wrong purchasing group system automatically set one strategy which not allow to create purchase order.
There is too many plants (150) and purchasing groups (60) to create all combinations in strategy. So I cannot do that.
Maybe there is some useful user-exit?
I use SAP ECC 6.0
My problem occurred because SAP allow to create PO with reference to PR which have no assigned strategy.
Thanks in advance for help
Arek

Yes it is solution
But as I wrote before there is too many incorrect combination.
Example
PG A1, A2, A3, A4. A50
Pl 2200, PG A1 OK
Pl 2200, PG A2 OK
Pl 2200, PG A3..50 NOK
For this example I have to set 48 combinations (strategy with S).
I noticed that I would have to set about 200 strategies. Client dont want accept it.
You wrote set up one unique strategy. How? As I know I need 200 strategies (or there is something I dont know
Kind regards
Arek

HT201089 if child over 18 in family sharing can they purchase items themselves? Will they then be able to share them with other family group?

if a child is over 18 in family sharing can they purchase items themselves? Will they then be able to share them with other family group members?

If they are still part of Family Sharing, these items will be shared.

Do the purchase order can be created with several purchasing groups?

Hello gúrus,
I need your help again a.s.a.p. please!
We are implementing SAP R/3 ECC 600 and we have SRM too.
In the SRM is possible to create a purchase order with several purchasing groups, but, in MM we cannot because of the purchasing groups is the the header level.
Somebody expert from SAP told to the client that its possible to create a Purchase order in MM with several purchasing groups..
Is it possible? or, where I can find information from SAP that said that its not possible?
Could you help me please?
Regards,
Sandra Palomo

How can I create a PO with different purchasing groups to the same PO?
Could you give me a detail?
Regards,
Sandra Palomo

I just dowloaded an il divo album. when it was placed on my ipod classic it came in as 8 different songs; not listed as 1 album with 8 songs. this has happened before with other purchases. Why? How can I insure an entire album is saved as an entire al

i just dowloaded an il divo album. when it was placed on my ipod classic it came in as 8 different songs; not listed as 1 album with 8 songs. this has happened before with other purchases. Why? How can I insure an entire album is saved as an entire album and not individual songs. And now how can I move individual songs to the album they belong in?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Restriction for Material Component deletion after PO creation in PS

I want to restrict the material component deletion from the Projects once the PO is created for it. I have done the required configuration settings in OPSG (Change Profile Order Change management) where the system must give an error for material component deletion once the PO is created for it. But still it is not working.
1) Why the configuration in OPSG is not working?
2) Is it required to use user exit CNEX0009 or CNEX0039?
3) Where can I locate uset exit CNEX0039 if required?
Can anyone help on this issue!!!!

Hi,
Please check again the settings in OPSG.It is std functionality in SAP so i think it should work.
Muzamil

Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

IQ09 - Different process for material with bacth Split and no Batch

Hello,
i want to know if IQ09 treats material with batch number and no batch in the same way for fetching the serial number.
view V_EQUI_EQBS_SML is used to fetch the serial numbers.
i just need to confirm if the process is same in case a material has batch & no Batch together.
Thanks
Renu

Hi,
We faced the same problem and went back to option:
Cont.Ins Lot creation (QMAT-CHG) = "For each Material Document item
This solves the problem and was in our case the solution for receipts from production. But at goods receipt for purchase orders we still use the option for each material document, batch and SL.
There we pick up the materials in WM by hand by scanning the bar codes on the pallets (printed at GR). The transfer order creates a negative quant in unrestricted use that is later filled by the automatic usage decision that moves the stock from quality to unrestricted in the same bin.
Hope this helps.....
Arno

Intercompany transfer for material with item category Erla

Hi,
I have a typical requirement.
I am creating a value pack(finish good) with item category mainatined as ERLA(while mat master creation) which consistes of 2 items.
I have maintained a BOM for this value pack(finished material).
Since ERLA is maintained,I can explode BOM in Sales Order creation(correct me if I am wrong)
This is okay for sales cycle.
I have following requirement
I want to do a Intecompany stock transfer of this value pack(i.e. finish good) with doc type NB.
The problem in this is that it gives error while creating outbound delivery stating some entries missing in table (do not exactly remember)for NLCC/DOGN.. something like that.
If anyone has done this type of scenario earlier then request you to send me the configuration settings required to be done in terms of Item category/Delievry combination etc etc .
This is quite urgent for me.
If there is any different way to map this Intecompany Stock Transfer of Material (with Item category maintained as ERLA) then please let me know.
Thanks in advance.
Regards,
manOO

Hi
You maintain "Item category group" NORM in the Sales org 2 tab, this is used for sales organisation and distribution channel for Outboumd delivery.
The "General Item category group" does not refer to the Sales organisation and distribution channel, this is used for Inbound delivery.
In can create the material master in MM01, specify the "Material type" and "Industry sector" .
For, Item category determination in VOV4, you need to assign like this as below,
Sales doc type + Item category group + usage + Item category of higher level item = Item category.
Item category determination for free item,
OR + NORM + FREE + TAN = TANN.
As beacuse you are giving the normal material as free, therefore you must give the indication to the system to use it as free material by specifying the usage as "FREE".

Split valuation for material with two different price indicator S and V

Hello Gurus,
Is it possible to maintain split valuation for same material with two different price indicator S and V.
For Ex. Material A is manufactured can be manufactured in house , procured from outside vendor and can be purchased from subcontracting vendor by providing raw material.
We want to keep Price control V for same material " A" which is procured from outside vendor.
And price control S for inhouse produced same material " A".
Besically this material is semifinished and having BOM for subcontracting.
Please advice.

Hi
When the material is split valuated, you maintain the accounting view for the material 1st with valuation category, here the price control should be V.
When you will extend the material to valuation type "Inhouse mfgd" maintain the price control as S, for valuation type "Procured form outside vendor" maintain it as V.
Regards
Prasad

Restricting for creation or PO for material with other purchase group

Similar Messages

Maybe you are looking for