Restricting issue of goods to cost center with respect to material type

Dear Users,
I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
Thanks,
Manoj

Hi Ajay,
Thanks for valuable input.
I also thought in the same line , but user has the following concern on this:
Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
OKB9: They have different Cost center for different valuation area for the same GL Account.
Hence through OKB9 also, we cannot post directly to COPA.
That's the reason the above option were not adopted.
My other concern to this is:
In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
My question, where can I see that figure whether in any table or in Cost Center report??
If that is also available we can try to match those values and post to COPA.
Let me know your thought on this.
Thanks and regards
Kami

Similar Messages

  • Posting to Cost Center with SD statistic billing type

    Dear All:
    I'd like to know if it's possible to do statistic billing type documents sales from SD posting to Cost Center instead using CO-PA or profit center.
    thanks in advance.
    Sebastiá

    Thank you, Waman. I'm going to read these notes.
    regards,
    Sebastian.

  • MM revision with respect to material type

    Hello Team,
    Can we restrict material revisions only for few material types.? If so how?
    regards,
    sai
    Edited by: Csaba Szommer on Jan 17, 2012 8:47 AM

    Hello
    1)put t-code cc01
    2)don't give any external no.
    3)give change type
    4)give description
    5)make change no. status active
    6)select object type and tick mark over material only
    7)select object (e.g, give material no.)
    then save it.Then note the change number.
    8)Goto CC11 t.code,give material no.
    enter now,
    then give change number
    give revision level 01
    save now
    9)goto,MM02 t code
    Give material no. along with change no. and enter now
    Then you can see Basic data one revision level
    Regards
    Gyana

  • Goods Issue for Project and Cost Center from consignmnet

    I am issue goods directly from consignment stock to Cost Center and Project using movement type 201 K and 221K.
    Business has a requirement and they like to know how much goods issued to specific cost center or project. Is there any way in SAP I can look into this?
    Thanks
    Kawal

    Charlie,
    This option doesn't give me the information by project or cost center.
    Option which I can see goes to table MSEG set different search criteria. Problem with this user has to enter lot of information.
    Thanks
    Kawal

  • Mandatory fields With reference to Material types

    Dear Gurus,
    I need to make few fields as mandatory with reference to material types while creation of the material master data.
    For example:
    For Semi finished and Finished Schedule margin key is required(mandatory)
    For Raw Materials Schedule margin key is optional.
    Regards,
    Siddharth

    Hi
    find  following step to make field mandatory for material type
    Follow the stpes for making field as optional, required entry
    1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
    2.Go to T.Code: OMSR and enter that field name and get Selection Group
    once you get selection group and field name
    3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
    3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
    check following link you will get clear idea [How to configure the fields required for each Material type ?;
    Regards
    Kailas ugale

  • Create an external HU with different packaging material type

    Hi All,
    Iu2019m trying to create an external handling unit with the material below:
    Packaging material: 2892
    Packaging material type: Z501
    Material Group: Packaging Materials: Z501
    But the system creates de HU with the Packaging material type: 0001 instead Z501.
    My question is.. How can I set the material or HU to take the Packaging material type Z501?
    Thank you for your comments,
    Jaime S.

    My problem has been solved. Regards

  • Good issues to cost center with extra charges 10% from cost

    Hiii Guy,
    My user would like to charge the cost center 10% from cost when good issues to cost center is perform,
    can we do it in sap ?

    The scenario is like this,
    Only Merchandise Department have the authority to ordering merchandise item from vendor, when other depart required that merchandise item, Merchandise depart will perform GI to that requested cost center.
    So Merchandise Depart would like to have extra charge on there extra work.

  • PM Order Confirmation create actual posting in Cost Center, with CE type 43

    Dear Expert,
    I would like to know the business flow of Plant Maintenance that impacts cost center reporting.
    During PM order confirmation, it will create an actual posting in Cost Center from Cost Center Reporting (No FI posting), say CC Operation, with Cost Element type: 43, which is attached with the activity type of Labor Cost assigned the the PM module.
    Example: Cost Center: CC Operation, Cost Element: 840001 (CE type: 43), Amount: USD 100- (negative sign)
    My Question:
    How does this posting (currently is in controlling only) in cost center Operation with Cost Element type: 43 be reflected in my FI reporting?
    Let say there is an FI posting of labor cost in CC Operation, amount USD 100, then from Cost Center Reporting, it actually offset both amounts, and this cost center become 0 in amount.
    Kindly advise the concept of Plant Maintenance.
    This seems like same with the concept of KB21N.
    Thanks.

    Hi Karthikeyan,
    My issue and concern is similar to the issue raised as follows:
    Secondary Cost Element Configuration for Plant Maintenance Order
    http://scn.sap.com/thread/3488730
    In this forum, it says that the posting in CO, during PM order confirmation is ...
    +10 for Order and -10 for cost center A
    After PM Order settlement:
    -10 for Order and +10 for cost center A
    From the cost center and PM Order CO report, they are 0 in value ...
    Is this the correct way?
    Thanks,
    -Chin

  • How to design and develop Cost center with SAP BPC 5.1 ?

    Hi all,
    Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
    Thanks,
    Sandy

    Hi Sandeep,
    1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
    2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
    3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
    4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
    5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
    6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
    Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
    regards
    shyam

  • Restriction of Time-dependent data (Cost Center) according to a specific role

    Dear experts,
    Has some one of you implemented a functionality to restrict Time-dependent data (for example, Cost Center) edition, according to a specific role assigned to an End user?
    I imagine it is possible, but we should develop an User-exit in order to get this goal.
    Let your comments here if possible, so that I can argue with my End user. I will try to give you points if you help me with this query.
    Thanks & Kind Regards,
    Daniel.

    Hello All!
    We have talked to Authorizations specialist and he indicated a customizing transaction in FI-AA module called ANSICHT (IMG -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Authorization Management -> Process Asset Views). In this customizing, it is possible to edit an existing asset view and turn on/off fields according to the company needs.
    Afterwards, you should request some adjustment in the roles that contain the A_A_VIEW authorization object.
    I am considering this question as "assumed answered'.
    Regards,
    Daniel

  • Not updating G/L account and cost center with BAPI BAPI_PO_CREATE1

    Hello Friends,
    The two fields G/L ACCOUNT and Cost Center is not updated using BAPI BAPI_PO_CREATE1. I am unable to understand why? This is what i am passing to account assignment structure( POACCOUNT). Filled POACCOUNTX structre as well. I have passed company code at the header level.
    PO_ITEM = 00010
    SERIAL_NO = 01
    CREAT_DATE = sy-datum
    GL_ACCOUNT = 621000
    COSTCENTER = 1000
    CO_AREA = 4000
    Please let me know why it is not updating anything i missed while passing?
    2>I need to update GR quantity but this field is not available in the BAPI ..Please let me know how to update this field.
    Any help is highly appreciated.
    Regards,
    Raj

    Hi, I have a problem I use the bapi BAPI_PO_CREATE1, I pass the table pt_poaccount in the parameter poaccount but the bapi when register my purchase order doesn't register correctly the values KOSTL, AUFNR, PS_PSP_PNR, NPLNR of the tablepoaccount and register the default values of the contract. Please i need help with this.
    CLEAR s_poaccount.
         s_poaccount-po_item     = <fs_datos>-ebelp.
         s_poaccount-serial_no   = w_serial.
         s_poaccount-costcenter  = <fs_datos>-kostl.
         s_poaccount-orderid     = <fs_datos>-aufnr.
         s_poaccount-wbs_element = <fs_datos>-ps_psp_pnr.
         s_poaccount-network     = <fs_datos>-nplnr.
         s_poaccount-activity    = <fs_datos>-vornr.
         s_poaccount-quantity    = <fs_datos>-menge.
         s_poaccount-net_value   = <fs_datos>-brtwr.
         s_poaccount-creat_date  = sy-datum.          
         s_poaccount-itm_number  = <fs_datos>-ebelp.  
         s_poaccount-co_area = '1001'.               
         APPEND s_poaccount TO pt_poaccount.
    CLEAR s_poaccountx.
         s_poaccountx-po_item     = <fs_datos>-ebelp.
         s_poaccountx-serial_no   = w_serial.
         s_poaccountx-po_itemx = 'X'.
         s_poaccountx-serial_nox = 'X'.
         s_poaccountx-creat_date = 'X'.
         s_poaccountx-itm_number = 'X'.
         s_poaccountx-co_area = 'X'.
         s_poaccountx-costcenter = 'X'.
         s_poaccountx-orderid = 'X'.
         s_poaccountx-wbs_element = 'X'.
         s_poaccountx-network = 'X'.
         s_poaccountx-activity = 'X'.
         s_poaccountx-quantity = 'X'.
         s_poaccountx-net_value = 'X'.
         APPEND s_poaccountx TO  pt_poaccountx.
    CALL FUNCTION 'BAPI_PO_CREATE1'
         EXPORTING
           poheader          = pe_poheader
           poheaderx         = pe_poheaderx
         IMPORTING
           exppurchaseorder  = pi_exppurchaseorder
         TABLES
           return             = pt_return
           poitem           = pt_poitem
           poitemx         = pt_poitemx
           poschedule    = pt_poschedule
           poschedulex  = pt_poschedulex
           poaccount      = pt_poaccount
           poaccountx    = pt_poaccountx
           poservices     = pt_poservices
           posrvaccessvalues = pt_posrvaccessvalues.
    The BAPI is register with these values as default however i pass other values in table
    pt_poaccount

  • Co-pa and cost center with different profit centers?

    I have a requirement to post (from fb50) to:
    1) True posting: A profitability segment with profit center XXX
    2) Statistical posting: A cost center assignet to profit center YYY
    I enter values in cost center, profit center and Prof.segm., but as soon as I press "Enter" the system overrides the profit center I enter and derive YYY from the cost center.
    If I try to change the profit center manually to XXX I get message KI350 (profitability segment being derived again) and the profit center is reset to YYY!
    I have played with the field status groups and the message control, but no matter what I do I can't change the behaviour.
    Any ideas?

    Unfortunately it doesn't help me:-(
    Since the cost center posting ends up being statistical it doesn't make sense (at least not to me...) that it takes priority over the manual entry (or one derived in the true posting - the CO-PA assignment).
    I have included the profit center in my characteristic group, but it is greyed out.
    I have also made a derivation specifically clearing the profit center and another one rederiving it from other CO-PA assignments. It looks fine in the derviation analysis but it doesn't change in the document!
    Are there other options? Will a substitution be able to take priority over the statistical assignment?

  • Link Cost center with Org unit

    Hi experts,
    I have one question. I have create org unit for the past 2 month (May 2009). However I don't create relationship with cost center. After 2 month I decided to create cost center for the org unit. The date of relationship based on creation of org unit.
    The question is, what the impact  to the payroll since I have run payroll for 2 months.

    What ever date you maintained in relation ship for create cost center the same date will get updated in IT0001. If you set Retro date ( In PA03) based on that system will go for retro calculations. In retro calculation only CC will update net amount remain same.
    As of now how did you maintain cost center?

  • Forecast for planning over the Cost element/Cost center with KP06

    Hi all
    I'm searching a idea: one of our chief controller need to insert a "forecast" of budget inserted over the various cost elements/cost centers using the transaction KP06. THe problem is that he don't want lost the budget because he can need the reload the previous budget data during the year if the actual situation change. Obvisiously the insertion of the forecast overwrite the budget data over the version 0. This forces us to download over a file the budget and archive it, and reload it eventually. But this solution, a part the programming effort, don't permit to have both the data at the same time in the system. Exist a pratical customizing solution in CO for manage a "forecast"? Our release is 46c.
    thanks
    Davide

    Thanks Pascal.
    Some questions (i dont' have a CO background ):
    >execute charge transferts and plan distribution in the new >version
    Can you explicate me these concepts (or the transaction used for make this, probably I know this but in italian the name is different)? The KP47 copy the value over the single cost element or only the total of cost center?
    >KP98 is the transaction to copy postings from version 0 to >another version. In this case version 0 is the template.
    Are you sure? The KP98 have the description "Copy by actual version to planned version", the KP97 "copy from planned to planned"
    thanks in advance
    Davide

  • Disable or Validate Order or Cost center in MIGO for Mvmt type 201/261

    Hi All,
    I want to disable or validate 'Order' field in MIGO for the goods issue if the movement type is 201.
    I want to disable or validate  'Cost Center' field in MIGO for the goods issue if the movement type is 261.
    User do not want 'Order' field in MIGO for movement type 201 & User do not want 'Cost centre' field in MIGO for movement type 261.
    Thanks
    Pabi

    Hi
    go to OMJJ
    here select move type and then give move type 201
    now select 201 and click on Field selection (ENJOY)
    now just remove the order field from here
    similarly do for 261 movememt
    this will affect to whole client

Maybe you are looking for

  • My ipad won't come on

    My IPad wil not come on

  • Report Painter-How to change the order of fields on selectn screen.

    I have a custom Report Painter report that has 2 fiscal years 1 current FY and 1 Comparison FY.  This also includes 2 sets of periods.  I want the period fields to group together by Fiscal Year and Comparison Year. As shown below. Fiscal Year From Pe

  • Masking password on command line

    anyone know how to mask password from command line input before version 1.4 ? thx

  • Append to XML remains greyed out

    Hi folks, I am using MII 15.0 SP2 Patch 8. I created a new transaction having a xML transcation variable called "test" defined as you cans ee in below screenshot. It is a plain XML having a root node called options. Thereafter I created a new transac

  • After I put an inner for loop,i don't get any output!

    Hello, I have an RTF which does not show the output properly. I had a for-each@section, then i put another for-each to repeat the block of data twice The code is as follows: *<?for-each@section: Books_S1/Category_S2_Group/On_Rental_S3?>* <?Fax_Number