Restricting P.O output from ECC to Sus component of SRM

Hi,
I do have a requirement of Restricting the output of P.O document created in ECC to SRM-Sus. When a P.O is created and saved in ecc system it mustnot be shared with
SUS provided it has no indirect materials . I do have the logic with me . I created on routine in VOFM and customized it in "Define Message Schema for Purchase Order" in SPRO and the sy-subrc is set ne 0 if the condition fails . Then also the P.O is being shared with SRM-SUS . Are there any method for accomplishing this? Thanks in Advance,
Pradeep.

Hi ,
Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM and was CP in Org Structure.
But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning to respective Postion (S), but BP is not creating in SRM and in the USERS_GEN for this User, its postion and ORg Unit to whom it assigned is giving below error
Determination of connections to object 'BP' of 'CP' '00000015' failed
Message no. BBP_UM_UI036
I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
Can anyone please suggest what should be the cause and solution of it ?
Thanks
NAP

Similar Messages

Vendor Master Replication Error from ECC to SUS : Error in ALE Service

Dear Experts,
We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
Please provide inputs to overcome this problem
Thank you,
Regards,
Ravi

Hi,
Check
Re: Idoc Error Status "Entry in outbound table not found "
Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
Set up them again and When these have been set up try reprocessing your IDocs from BD87

EBP SUS scenario ---sending a PO output from EBP to SUS

Hi All,
We are working on EBP SUS scenario with SRM 5.0 and ECC6.0 as the backend.
We are creating a PO in the EBP which is to be sent to SUS for creating a POR in SUS from vendor.
1) How do we configure the PO output from EBP to SUS system?
We could see one method call in Set output actions and output format for sending XML purchase orders. How do we configure this to send it to SUS.
2) Is it possible to have EBP and SUS in one client where from we will create a PO and send it to SUS?
Thanks in advance.
Best regards,
Sridhar.

hi,
there is one customizing setting available --> you need to set this in your SRM system
transaction --> spro ---> supplier relationship Management --> SRM Server --> cross application basic settings -->
Set output actions and output format --->Condition dependent document output
in this setting select --> purchase order ---> you can see four actions --->
for the last action --->Method call ---> Time of processing ---> should be -->Processing when saving document.
2) it is possible to have SUS and EBP in same client.
You can refer to few notes available on service market place.
---> it is not to be used for productive use --> only for demo purpose.
one thing i remember is --> the system type in the scenario is EBP_SUS ( One client EBP and SUS )
Edited by: khan voyalpad usman on Feb 19, 2008 12:59 AM

Replicating GR from ECC to SUS

Hi
We are on SRM6.0 with MM-SUS classic scenario, in standrad MM-SUS scenario when ASN is created in SUS respective inbound delivery is created in ECC and GR if created agaisnt this inbound delviery GR is replicated to SUS.
If user doesn't want to do GR agaisnt inbound dleivery but against PO will the GR be replicated to ECC, if not replicated can this configurable or is it an enhacnement that is required.
with regards
Manjunath

Hello Manju,
You can use RPODDELVERY for replication of GR from ECC to SUS.
You can find more details
Re: What reports are used to send PO, Conf and Inv from MM to SUS?
Hope this helps.
Thanks
Ashutosh

Vendor replication from ECC to SUS

Hi Gurus,
We are replicating vendors from ECC to SUS.
The XML message is failing in the SUS side.
The error is
Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application
Please find below SXMB_MONI trace
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Program:
It seems similar issue has been resolved in the below thread but there is no mention of solution.
ABAP Inbound Proxy Error !
Please help in resolving the issue.
With Regards,
Malay

Hi Malay,
Kindly check if you have defined the logical system of SUS system under T-code SALE in your SUS client.
Regards,
Nikhil

How to pass PO customer fields from ECC to SUS ?

Hi Gurus,
We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
Please advise.
Thanks and best regards
jack

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

Invoice and Credit Memo from ECC to SUS

Hi Gurus
Is it possible to replicate Invoice or a credit Memo from ECC to SUS if the PO was delvired to vendor through SUS.
with Regards
Manjunath

HI ,
part1 :
ERS Invoice from ECC is transfered to SUS system for display purpose to Vendor in MM-SUS scenario. IDOC "GSVERF01" is used for this purpose.
part 2 : Invoices can be created in SUS system by vendor against ASN ( Advanced Shipping Notification or purchase Order . The invoice is transfered to ECC system through XI. Message Interface for the same is "InvoiceRequest_Out" .
For reference please check
http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
Regards,
Kalandi

Error while transferring Purchase Order from ECC to SUS

we are working on plan driven procurement and transferring the PO from ECC to SUS, we are getting the error as "No partner found for partner number ECCSUS8".
In ECC the Vendor No is ECCSUS8, trasfered vendor from ECC to SUS. Vendor registration is done based on the mail generated and vendor login is created in the portal and assigned the roles.

Hi
Are you facing this error in PO transmission to SUS (as you mentioned below)? or you are facing this error while sending out the vendors from R/3 to SUS from BD14?
If you are facing this in vendor transmission, you need to remove the tick (flag) "Use self reg component" in SPRO-SRM server-Supplier Self-ServicesMaster DataMake Settings for Business Partners. Then you can transmit the vendors from R/3 succesfully.
If this error is in PO transmission, need to analyse further.
Pls do let me know.
Thanks
Kiran

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

PO XML proxy is triggered twice from ECC to SUS

Dear Experts,
We are using Classical scenario. Once a shopping cart is created and approved a PO will be created in ECC through PI and corresponding SUS PO will be created in SUS system, It will be triggered from ECC. when we check in SXMB_MONI transaction. There are 2 proxy genetared to SUS. Actually only one should trigger.
Kindly guide how it can be checked.
Thanks & Regards
Arun.K.P

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

Limit service purchase order from ECC TO sus

hi,
while creating confirmation in sus, LIMIT Line is missing(MM-SUS scenario)
and there is no table items for confirmation.
but from EBP-SUS scenario limit line is appering for
confirmation.what needs to be done for getting limit line.
regds
Rami

Hi,
What method are you using to transfer PO from MM to SUS.
Hope you are using the new method in MM via badi : Material management->purchasing->Enterprise services(purchasing)->BADI: Selection of Outbound Enterprise Services of Purchaser Orders
You also need other configuration steps. Please check your solution manager content for detials.
I think limit will be supported in SUS only if you use the above method
Regards
Sam

Supplier Replication from MM to SUS

Hi Experts,
We are working on SRM 701 & ECC 600 EHP5 & PI 7.01.
Requirement is to replicate suppliers from the ERP system to the SUS system through PI.
Which integration scenario should I use in PI to do the required configuration?
I tried with the integration scenario "supplier_base_management" which includes the business system of SRM , ERP and SUS. But I don't want to replicate suppliers between SRM to ECC in this requirement.
Your help is very appreciated.
Please note: I have read through the configuration guide in the service market place but unclear of what scenario to use in PI.
Thanks
Kasee

Hi,
You need to set up scenario SE_SERVICES_PROCUREMENT in Model Configurator which is precisely mentioned by Nikhil.
Model Configurator itslef will take care of rest of the things.
Actually you don't need RFC connection from PI to SRM for Supplier replication. It's basically done from ECC to SUS.
Regards,
yaniVy
reward if helps

Restrict Contact Person replication from CRM to ECC based on Partner Funct

Hi Experts
We are replicating Contacts from CRM to ECC, by assigning them to Accounts. We have a scenario to restrict Contact Person replication to ECC only for specific Partner functions (we have 5 such partner functions), for remaining partner functions the contact Persons should not be replicated to ECC.
By Partner function I mean, while making this assignment of Contact to an Account in u201Ccontact Person Relationships datau201D under u201CPartner Function Assignment blocku201D (in web UI) we are adding a Partner function E.g. Author, (same can be seen in GUI, under Usage tab of CP Relationship data).
However we were able to replicate contacts assigned to accounts to ECC in our 5 partner functions, but even the unwanted contacts assigned to other partner functions in CRM are also getting replicated
How can I restrict CP replication from CRM to ECC based on Partner Functions assigned to the Contact Person
Your help is highly appriciated.
Points guaranteed.
Regards

Issue resolved using CRMC_BUT_CALL_FU.
Posing the table name, just in case it might help others.
Thanks

Facing challenges during creation of replica of .IDF file/Pdf output from 4.7 system into of Adobe forms in ECC 6.0 system

Facing challenges during creation of replica of .IDF file/Pdf output from 4.7 system into of Adobe forms in ECC 6.0 system.
If anybody has easy way to make those forms...
Please suggest...

Hi Shabeer,
the first thing is that you are running on a very very low RAM.
For ECC 6.0 with dual stack SAP System to run you should have atleast 4 GB of RAM.
For your Dispatcher issue kindly check the status of your Oracle database and the connection from SAP To Database.
You can check the oracle status using brtools utility.
Regards,
Prem

To get SUS PO from ECC PO

Hi all,
Is there any FM to get SUS PO from ECC PO?
I know, we can get it by using the tables BBP_PDHGP and CRMD_ORDERADM_H, to get the details. But, wanted to know if there
is any FM to do this.
Thanks & Regards,
Razia Shaheen

Hi,
What is business side requirement? If you share it, we can think better solution.
Have you checked the FM BBP_PD_SUSPO_GETDETAIL?
Regards,
Masa

Restricting P.O output from ECC to Sus component of SRM

Similar Messages

Maybe you are looking for