Restricting rows in table control.
I only want 4 rows in my table control but it is coming as a number of rows...I want to restrict row in my table control,Please tell me how do that?
Hi priya
I am sending the code which i used in my screen see weather it will suite you.if any doubts let me know as well this is for 10 lines
MODULE COUNT_UPDATE INPUT.
data cnt(10).
DESCRIBE TABLE itab1 lines cnt.
append itab1 TO ITAB2.
LOOP AT itab2.
IF itab2-srno is INITIAL.
cnt = cnt + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = cnt
IMPORTING
OUTPUT = itab2-srno
itab2-srno = cnt.
ENDIF.
READ TABLE itab1 WITH TABLE KEY srno = itab2-srno aufnr = itab2-aufnr." vbeln = itab2-vbeln.
IF sy-subrc eq 0.
MOVE-CORRESPONDING itab2 to itab1.
MODIFY itab2.
MOVE itab2[] to itab1[].
else.
MOVE-CORRESPONDING itab2 to itab1.
append itab1.
ENDIF.
ENDLOOP.
PERFORM operations.
REFRESH CONTROL 'TCL' FROM SCREEN '1000'.*
tcl-lines = 10. " for 10 lines
clear itab2.
CLEAR itab2[].
ENDLOOP.
ENDMODULE.
Similar Messages
-
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to get all the index of "selected rows" in table control?
Hi Gurus,
I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
I know that the event for capturing selected row is in PAI.
I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
TOP INCLUDE
YPES: BEGIN OF Y_ZQID_CHECK,
IDNUM TYPE ZQID_CHECK-IDNUM,
WERKS TYPE ZQID_CHECK-WERKS,
MATNR TYPE ZQID_CHECK-MATNR,
LICHA TYPE ZQID_CHECK-LICHA,
LIFNR TYPE ZQID_CHECK-LIFNR,
ECOA_S TYPE ZQID_CHECK-ECOA_S,
ID_STAT TYPE ZQID_CHECK-ID_STAT,
ID_DATE TYPE ZQID_CHECK-ID_DATE,
FLAG_MAILCOA(1) TYPE C,
MARK(1) TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
END OF Y_ZQID_CHECK.
DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
PAI
PROCESS AFTER INPUT.
* MODULE USER_COMMAND_9004.
LOOP AT T_ZQIDCHECK_DISCH.
MODULE READ_TC_DISCH .
ENDLOOP.
module READ_TC_DISCH input.
DATA: W_LINE_SEL TYPE SY-STEPL,
W_TABIX LIKE SY-TABIX.
GET CURSOR LINE W_LINE_SEL.
W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
If I am selecting single row, I can properly get the selected index via debug.
BUG:
When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
Please see the screenshot.
[url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
Helpful inputs will be appreciated.
Thanks.
Jaime
Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PMHi,
Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
Flowlogic.
LOOP WITH CONTROL TC_01.
Module Get_Marked.
ENDLOOP.
Module Pool
Module Get_Marked.
read the data from the internal table where mark = 'X'.
this should give you only selected records.
Endmodule.
Kindly check the tablecontrol property.
Regards,
Ranjith Nambiar -
Unable to delete a row in table control
Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkarhi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
WHEN 'DELETE'.
PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
DELETE int_factor WHERE chk = 'X' .
CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s -
How to select perticular row in table control for BDC
Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RPHi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP -
How do I deselect a row in table control on scrren?
Hello All:
How do I write the code to deselect a row in table control on a screen? This is in dialog programming.
Thanks.
MithunI thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13) -
BDC : to select different rows in table control
Hi,
I have to fill many rows in table control and want to select different row one by one in increasing order which rows are filled in BDC.
Can anybody suggest me with coding...
thanks
nareshHi ,
I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
Program Name : ZFV11_NEW
Program Description : To Upload Condition Records-FV11
Author : Jagadish
Start Date : 11/06/2007
REPORT zfv11
NO STANDARD PAGE HEADING LINE-SIZE 255.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
TABLES : t100.
DATA: BEGIN OF record OCCURS 0,
data element: KSCHA
kschl(004), "Condition Type
data element: SELKZ_LIST
selkz(001),
data element: WERKS_D
werks(004), "Plant
data element: ELIFN
lifnr(010), "Vendor
data element: MATNR
matnr(018), "Material No.
data element: KBETR_KOND
kbetr(016), "Amount
data element: KODATAB
datab(010), "Condition Validity Date from
data element: KODATBI
datbi(010), "Condition Validity To
data element: MWSKZ
mwsk1(002),
END OF record.
DATA : BEGIN OF it_new OCCURS 0, " Internal Table for Header Data
kschl(004),
werks(004),
lifnr(010),
END OF it_new.
DATA : BEGIN OF it_item OCCURS 0, " Internal table for Item Data
werks(004),
lifnr(010),
matnr(018),
kbetr(016),
datab(010),
datbi(010),
mwsk1(002),
END OF it_item.
DATA : cnt(2) TYPE n,
fld(25) TYPE c.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA : n TYPE n.
DATA:
BEGIN OF t_data OCCURS 0,
data TYPE string,
END OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
DATA : p_mode TYPE c.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : l_mstring(150).
DATA : BEGIN OF bdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
PARAMETERS : p_file1 LIKE rlgrap-filename.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
LOOP AT it_new.
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV13A-KSCHL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RV13A-KSCHL'
it_new-kschl.
PERFORM bdc_dynpro USING 'SAPLV14A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV130-SELKZ(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-KBETR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'KOMG-WERKS'
it_new-werks.
PERFORM bdc_field USING 'KOMG-LIFNR'
it_new-lifnr.
DATA: "X(5) TYPE N,
N(5) TYPE N.
N = 0.
LOOP AT it_item.
N = N + 1.
ENDLOOP.
"X = 1.
CNT = 1.
DO N TIMES.
IF CNT > 19.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
ENDIF.
cnt = 1.
LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-matnr.
CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
PERFORM bdc_field USING fld it_item-kbetr.
CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datab.
CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datbi.
CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-mwsk1.
cnt = cnt + 1.
if cnt = 20.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
endif.
CLEAR it_item.
ENDLOOP.
ENDDO.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-MWSK1(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO it_msgtab.
CLEAR bdcdata[].
PERFORM error.
ENDLOOP.
Start new screen -Subroutine for screen s *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field -Subroutine for field s *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
*& Form data_upload
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file1
TABLES
i_tab_converted_data = record
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " data_upload
*& Form error
FORM error .
LOOP AT it_msgtab.
IF it_msgtab-msgtyp = 'E'.
SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
AND arbgb = it_msgtab-msgid
AND msgnr = it_msgtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
WRITE: / it_msgtab-msgtyp, l_mstring(150).
ELSE.
WRITE: / it_msgtab.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " error
*& Form table_Control
FORM table_control .
SORT record BY lifnr matnr.
LOOP AT record.
ON CHANGE OF record-lifnr.
MOVE-CORRESPONDING record TO it_new.
APPEND it_new.
ENDON.
MOVE-CORRESPONDING record TO it_item.
APPEND it_item.
ENDLOOP.
ENDFORM. " table_Control
Reward if useful
Thanks
Jagadeesh.G -
Adding one additional row to table control of VA01
HI all,
I am working on free goods N:N senario which is not supported by sap standard.
so we have decided to club all the material on the basis of material group and PSTYV = 'tann' in the table control of va01 and at the end of tann we have to display the free goods .The user exit is USEREXIT_MOVE_FIELD_TO_KOMP.
Please help in in adding the additional row in table control of va01 (TCTRL_U_ERF_AUFTRAG).
Even i have gone through all the thread in sdn and tried all the solution but none of the solution is working .
plz quote solutions....
thanks..
Kundal.The user exit is USEREXIT_MOVE_FIELD_TO_KOMP
Are you adding condition records, or adding free materials to VBAP? If free materials to VBAP, you're in the wrong exit, I think....look for routines that allow you to add to internal table XVBAP in includes named like MV45AFZ*, and remember to set you UPDKZ to 'I'-insert if you're adding new rows.
Not sure what you mean by not supported by SAP standard; SAP does support free goods, via config!
Edited by: BreakPoint on Mar 14, 2011 4:11 PM -
Enable/Disable Rows In table Control
I m getting material number for particular material doc. if i get N rows in output i want to disable all other rows of table control.
Moderator message: please search for previous solutions to similar problems before asking.
Edited by: Thomas Zloch on Nov 20, 2010 7:24 PMHi,
In PBO, Loop at your table control lines, create a module inside it and use
LOOP AT SCREEN.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDLOOP.
Regards,
Senthil -
Selecting rows in table control
Hi experts,
I have question regarding selecting rows in table control. How can I select a row when a button is pressed. I cannot use the selection column in this case. Is there any option to achieve my requirement without using the selection column. Thanks.
regards,
sriram.By,
Using the Get cursor syntax you can achive the Selected row in Table control.
DATA : selrow TYPE i,
selindex TYPE i .
* getting the cursor line in Table Control for selected row
GET CURSOR FIELD selfield LINE selrow.
selindex = <tablecontrol>-top_line + selrow - 1.
Prabhu -
How to select all the rows of table control in BDC
Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..Sorry about that lakshmi. Here is my code.
PERFORM dynpro USING : 'X' 'SAPMMCP6' '0105',
' ' 'RMCP2-MATNR' t_matnr,
' ' 'RMCP2-WERKS' t_werks,
' ' 'BDC_OKCODE' '=AKTV'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=MRKE'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=GRAO -
How to set total number of rows of table control
Hi All,
I want to set the total number of rows of table control. I don't want to display the blank rows in table.
Regards,
ShrinivasNeed some fine tuning regarding the scrollbar height but it's a start
Unless this isn't what you asked for
Small number of rows
Large number of rows
Attachments:
PlayingWithTable.vi 17 KB -
How to delete a row in table control?
Hi All,
I have a empty table control which is only use for data input(this data will then be use to store information to a custom table). I have two buttons, Create Entry and Delete Entry.
In my screenPainter for the table control, I have the checkbox w/SelColumn ticked and assign variable T_DATA-MARK on it.
In my code:
TOP Include
CONTROLS: tc_data TYPE TABLEVIEW USING SCREEN 9001.
PBO
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TC_ID.
MODULE LOAD_TABLECTRL.
ENDLOOP.
module LOAD_TABLECTRL output.
READ TABLE T_DATA INTO WA_DATA INDEX TC_DATA-current_line.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING T_DATA TO WA_DATA.
ENDIF.
endmodule.
PAI
PROCESS AFTER INPUT.
LOOP WITH CONTROL TC_ID.
ENDLOOP.
MODULE GET_USER_ACTION.
module GET_USER_ACTION input.
WHEN 'DEL'.
LOOP AT T_DATA INTO WA_DATA WHERE MARK EQ 'X'.
DELETE T_DATA.
ENDLOOP.
In my debug, the internal table T_DATA-MARK does not have any value(s) even if I selected a particular row in my table control.
Am I missing something here?
ThanksHi All,
Please see the actual screenshots and code below:
The aim of the table control is just to accept inputs, so the internal table in the PBO is always empty.
Table Control Screen Painter ScreenShot and Actual SAP Output: http://img710.imageshack.us/img710/4751/tablecontrolrowdelete.jpg
PBO
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TC_ID.
MODULE LOAD_TABLECTRL.
ENDLOOP.
module LOAD_TABLECTRL output.
READ TABLE T_ID_CHECK INTO WA_ID_CHECK INDEX TC_ID-current_line.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING T_ID_CHECK TO TC_ID.
ELSE.
"EXIT FROM STEP-LOOP.
CLEAR ZQID_CHECK.
ENDIF.
PAI
PROCESS AFTER INPUT.
LOOP WITH CONTROL TC_ID.
CHAIN.
MODULE CHECK_ENTRIES ON CHAIN-INPUT.
MODULE MODIFY_T_ID_CHECK ON CHAIN-INPUT.
MODULE DELETE_ROW ON CHAIN-INPUT
ENDCHAIN.
ENDLOOP.
module CHECK_ENTRIES input.
CASE ok_code.
WHEN 'DEL'.
PERFORM F_FILL_ITABCREATE USING ZQID_CHECK-MATNR
ZQID_CHECK-LICHA
ZQID_CHECK-LIFNR.
ENDCASE.
endmodule.
module MODIFY_T_ID_CHECK input.
DATA W_TEMPMARK(1) TYPE C.
MOVE: T_ID_CHECK-MARK TO W_TEMPMARK,
W_TEMPMARK TO T_ID_CHECK-MARK.
MODIFY T_ID_CHECK INDEX SY-TABIX TRANSPORTING MARK.
endmodule.
module DELETE_ROW input.
LOOP AT T_ID_CHECK WHERE MARK EQ 'X'.
DELETE T_ID_CHECK.
ENDLOOP.
endmodule.
form F_FILL_ITABCREATE using us_zqid_check_matnr LIKE MARA-MATNR
us_zqid_check_licha LIKE MCHA-LICHA
us_zqid_check_lifnr LIKE LFA1-LIFNR.
MOVE: us_zqid_check_matnr TO WA_ID_CHECK-MATNR,
us_zqid_check_licha TO WA_ID_CHECK-LICHA,
us_zqid_check_lifnr TO WA_ID_CHECK-LIFNR.
APPEND WA_ID_CHECK TO T_ID_CHECK.
CLEAR WA_ID_CHECK.
endform.
In my debug, I can now delete the internal table that has a 'X' mark on its respective row but on the SAP screen output, all of my entries are being deleted contrary to what the ABAP debugger is telling me.
Thanks -
To give colours for a certain row in table control in module pool
Hi,
In module pool,,,,,When I am displaying the Table Control......Suppose in some rows personnel no. is there and for the person who has exited from the company should be highlighted with red colour.
Please some code..
thanks..Hi Jayasree,
I think I had a similar requirement to have a one column on a particular row
available for input where all other rows for that column were not. It took
me a while to figure this out but it was quite simple. I expect it will
work for colour changes too.
In Process Before Output
LOOP AT INTERNAL TABLE INTO WA WITH CONTROL TC
Call Module
END LOOP
In the module program the condition on which the colour change / input
status etc has to be changed using
IF condition = true
LOOP AT SCREEN
IF SCREEN-NAME = column name
Make your colour / input status change
MODIFY SCREEN
ENDIF
ENDLOOP
ENDIF
I hope this helps you.
Please search the forum before adding a new thread. -
How to insert row in table control and save the data in tables
Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
WITH CONTROL CTRL_LP_D516
CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.
Maybe you are looking for
-
How do i edit photos from iPhoto?
whenever i try to open a new picture from the photo folder, i get sent directly to iPhoto. what do i to open and edit a picture that is saved to iPhoto? I have a macbook pro if this helps.
-
I have been struggling to find an exciting and informative video for students ages 9-14 that explains the basics of how to use an iPad. Everything that I have found either teaches coding of is very slow moving and more appealing to adults. If anyon
-
How to disable manual change in shipment address in delivery
Hi Gurus, My client's current configuration allows changing the shipment address (partner tab in header of delivery) on the address tab - without changing the ship-to party itself They now want to implement a change where all partner details will n
-
How can I open a PDF file on iPad?
How can I open a PDF file on my iPad
-
Solution sought: finding inter-linked pages within a site
Hi, Is there a button or function that tells me what other pages link to a page that I have open at the time? I know about Find and Replace, Check Links Sitewide and Change Link Sitewide, but none of these (that I can work out anyway) seem to have wh