Restricting Tab Out

Hi,
Using Jdev 11.1.1.6
I have implemented three column page template.. where my left panel has some taskflow and right have some other taskflow. My center has the af:panelTabbed , which have 3 showDetailItems.
Each showDetailItem has a region binding, which is called dynamically on some action..
I just wanted to ask, if there is any way that I can restrict Tab out from my CENTER i.e just Opened ShowDetailItem , to any other place in three column page template.
More Explanation
This is nothing to do with PanelTabbed component.... It's simple Keyboard 'TAB' I want to restrict.
Like if user uses Tab for accessing fields on the Center screen. Then after the last field on the Center TaskflowScreen, 'TAB' goes out of the screen to next Taskflow enabled field. I want to restrict that...
Regards,
Neha..
Edited by: neha on May 15, 2013 2:23 AM

Neha,
You could probably add a input text component in your main page (say under end / copyright facet of the pageTemplate) and set it width to 0. Add a clientListener to it which would set the focus to the first component.
Ex:
            <af:form id="f1">
                <af:resource type="javascript">
                  function checkTab(evt) {
                      var keyPressed = evt.getKeyCode();
                      if (keyPressed == AdfKeyStroke.TAB_KEY) {
                          var compToSetFocus = evt.getSource().findComponent('pt1:it1');
                          compToSetFocus.focus();
                      evt.cancel();
                </af:resource>
                <af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx" id="pt1">
                    <f:facet name="center">
                        <af:group id="g1">
                            <af:inputText label="Label 1" id="it1" clientComponent="true"></af:inputText>
                            <af:inputText label="Label 2" id="it2"/>
                            <af:inputText label="Label 3" id="it3"/>
                        </af:group>
                    </f:facet>
                    <f:facet name="header"/>
                    <f:facet name="end"></f:facet>
                    <f:facet name="start"/>
                    <f:facet name="branding"/>
                    <f:facet name="copyright">
                        <af:inputText id="it4" contentStyle="width:0px;">
                            <af:clientListener method="checkTab" type="keyPress"/>
                        </af:inputText>
                    </f:facet>
                    <f:facet name="status"/>
                </af:pageTemplate>
            </af:form>-Arun

Similar Messages

  • How do I create a new row on tab out of the last column, last row?

    JDev 11.1.2.1.0.
    I've seen a few topics on this but none that I think were really very good solutions.
    Use Case:
    On tab out of the last column in the last row, a new row should be added to the end of the table. Bonus points for setting the focus to the first <af:inputText> of the newly created row.
    Complications:
    1. I'm having a heck of a time trying to find a function that returns the column's displayed index. Sadly, <column binding>.getDisplayIndex() returns -1 unless the user has manually re-ordered the column.
    2. Value Change Listeners only fire if there is a value change. Guess that means I need to do client/server listeners to check each and every <af:inputText> for a tab press?
    3. I'm not even going to get into setting the focus. With all the templates, regions, etc. going on, it's dang near impossible.
    Any ideas on how to attack this one?
    Will

    Hi,
    You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
    Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
    Once you have created your installation, install is on your new system.
    The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • How to populate the data in fields if we tab out at one field

    Hi Gurus,
    I am new to OAF Technology and I've new requirement in custom OAF page.
    We have 12 fields like ID, Fname, Lname, Age, Address, Tphone etc..
    If we enter ID in message text input field box and tab out, then it should populate all the remaining fields data by default.
    Could anyone help me regarding this requirement?
    Thanks in Advance
    Sruthi

    Hi,
    Sruthi wrote:
    I am new to OAF Technology and I've new requirement in custom OAF page.
    We have 12 fields like ID, Fname, Lname, Age, Address, Tphone etc..
    If we enter ID in message text input field box and tab out, then it should populate all the remaining fields data by default.
    Could anyone help me regarding this requirement?---MessageTextInput filed set Action property:FirePartialAction and Event:TextInput
    ---Get the Event in co PFR
    if("TextInput".equals(pageContext.getParameter(EVENT_PARAM)))
    AM.setDafultValue();
    ---Write a method in AM
    public void setDafultValue()
    VOImpl vo=getVO1();
    if(vo!= null)
    vo.getCurrentRow().setAttribute("Number1","DefaultValue1");
    vo.getCurrentRow().setAttribute("Number2","DefaultValue2");
    ---Like this u can set default value when tab out.
    Regards
    Meher Irk

  • A black bar appeared at the bottom of the new window after I drag a tab out.

    this is actually an issue back in the mavericks safari, but the problem was somehow solvable and was not appearing every time.
    after upgrading to Yosemite, this problem appears every time.
    The problem is : when I have several tabs, then I drag a tab out, which you can see the minimized window.
    After you release it, it will become a new window as expected and intended. BUT there will be a black bar underneath.
    In the Youtube website, you can see that the upper part of the site is actually being blocked by the toolbar.
    ( I had waited for several seconds to let the toolbar to get to its original position )
    Clearly the black bar at the bottom caused this problem.
    It's a very annoying issue.
    I am not sure if it's a problem of Yosemite or Safari. But back in to mavericks, the problem also existed.
    Is there anyone out there having the same problem?
    How to Fix it ?
    P.S.1 HOWEVER, if i right-clicked the tab and select "move tab to a new window", the problem DOES NOT exist.
    P.S.2 I am using Mac Book Air(13", Mid 2013),  OS X Yosemite  (10.10.2)

    In the App store window at the top click on Purchases. Your download progress is there. If the progress seems to have stalled, click on the pause button and then restart the download. It should pick up where it left off.
    HTH

  • How to convert the date in the Parameter from to mm/dd/yyyy when you tab out of field

    Hello,
    Can some one help me out in Oracle Reports 3.0 version i am trying to
    set in the parameter form two date fields to mm/dd/yyyy.
    my questions is can we set the both of the date fields to if the user
    enters as 010202 and Tab out of the field it should automatically
    format to 01/02/2002.
    i know we can do this in forms but in the parameter form when you are
    sending as parameter to the report i am unable to do it.
    try to set date as format mask in properties but doesnt help..
    any body have any idea will be appreciated much..
    thanks in advance.

    Hi!
    Try to use dd/mm/rrrr format mask. I use it in my reports and it works fine for me. My user can enter 010101 in a date field and it is properly recognized as 01/01/2001 by reports.
    Hope it helps.

  • Restrict print out of Purchase order only for Production system

    Hi,
    I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
    is there any identifier to find the system is production or development.
    can anyone tell me how to restrict it,
    is there any function module, not based on client system.
    Thanx in advance
    Kesav

    Hi Kesavarathinam Vaidyalingam ,
    yes, I also use thomas' suggestion using
    t000-cccategory = 'P'.
    to determine productive client.
    Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to  t000-cccategory = 'T'.
    Regards,
    Clemens

  • Why can I not tab out of table cell after running command from keyboard

    In my Jtable I have context menu with actions that can be performed on the selected cells either using mouse, or the action can be initiated directly from the keyboard using the defined acceleratorkey.
    After the action has completed you can tab out of the selected cells using the Tab key or cursor keys if the action was initiated with the mouse, but not if initiated with the keyboard but Im at a loss as to what causes the difference.
    thanks Paul

    I found this one someWhere, maybe check your code if Cell returns true = isCellEditable(row, column)
    import java.awt.event.*;
    import javax.swing.*;
    public class TableActions extends JFrame {
        private static final long serialVersionUID = 1L;
        public TableActions() {
            JTable table = new JTable(15, 5) {
                private static final long serialVersionUID = 1L;
                @Override
                public boolean isCellEditable(int row, int column) {
                    return column % 2 == 0;
    //              return false;
            table.setPreferredScrollableViewportSize(table.getPreferredSize());
            JScrollPane scrollPane = new JScrollPane(table);
            getContentPane().add(scrollPane);
            InputMap im = table.getInputMap(JTable.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT);
            //  Have the enter key work the same as the tab key
            KeyStroke tab = KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0);
            KeyStroke enter = KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0);
            im.put(enter, im.get(tab));
            //  Disable the right arrow key
            KeyStroke right = KeyStroke.getKeyStroke(KeyEvent.VK_RIGHT, 0);
            im.put(right, "none");
            //  Override the default tab behaviour
            //  Tab to the next editable cell. When no editable cells goto next cell.
            final Action oldTabAction = table.getActionMap().get(im.get(tab));
            Action tabAction = new AbstractAction() {
                private static final long serialVersionUID = 1L;
                @Override
                public void actionPerformed(ActionEvent e) {
                    oldTabAction.actionPerformed(e);
                    JTable table = (JTable) e.getSource();
                    int rowCount = table.getRowCount();
                    int columnCount = table.getColumnCount();
                    int row = table.getSelectedRow();
                    int column = table.getSelectedColumn();
                    while (!table.isCellEditable(row, column)) {
                        column += 1;
                        if (column == columnCount) {
                            column = 0;
                            row += 1;
                        if (row == rowCount) {
                            row = 0;
                        if (row == table.getSelectedRow()//  Back to where we started, get out.
                                && column == table.getSelectedColumn()) {
                            break;
                    table.changeSelection(row, column, false, false);
            table.getActionMap().put(im.get(tab), tabAction);
        public static void main(String[] args) {
            TableActions frame = new TableActions();
            frame.setDefaultCloseOperation(EXIT_ON_CLOSE);
            frame.pack();
            frame.setLocationRelativeTo(null);
            frame.setVisible(true);
    }

  • Issue: LOV tabbing out loses focus

    Hi all,
    I've realised that typing some characters in a LOV field and tabbing out results in the following:
    1. The LOV popup window opens, then you select a value and the value is returned to the lov field.
    2. At this moment, the focus is LOST. I would expect the focus to be again at the lov field.
    This doesn't reproduce if you open the LOV with the LOV icon. In this case, the focus returns to the lov field, as expected.
    Is this a bug?
    Does anybody know how to solve it?
    Thanks in advance
    Version
    ADF Business Components 11.1.1.56.60
    Java(TM) Platform 1.6.0_18
    Oracle IDE 11.1.1.3.37.56.60

    Hi a.gruev,
    Thanks for your reply. I did some investigation and found that this has to do with IE8 only:
    Firefox 3.6: you enter some chars, the LOV opens, you select the value and finally, the mouse cursor stays at the end of the lov field value. OK.
    Chrome 7.0: exactly the same, but now the lov field value gets selected and then, the focus remains at the lov field. OK.
    Internet Explorer 8.0: works if I enter part of the value (which launches the LOV); if I enter the exact match, the focus is LOST. KO.
    Unfortunately we can't get rid of IE, so any suggestions for fixing this for IE will be appreciated.
    Barbara
    Edited: Anybody knows whether this is a bug?
    Edited by: Barbara Gelabert on 19-nov-2010 9:09
    Edited by: Barbara Gelabert on 22-nov-2010 6:39

  • Need to restrict Print out in back Ground Job

    Hi all,
    The T.Code COHVPI  will use for mass processing of Relealse process order. It the same time it will give print out for all process orders which are successfule change status to REALEASE status.Presently it is running forground Job , it is givind print out for process order shopfloor paper.
    NOw Client wants to run in Back gorund for tcode  COHVPI  , But it is running fine. But Clinet does not want print outt when it runs in the back ground. After my analysis , we can restrict print out with SY-batch eq 0 in the print program of Forms.
    But the process order status is changed to with Print out happend in the user status .
    Now i need to restict to change to status of PRINT OUT of process orders.
    Let me know i can i achive this requirement.
    Thanks in Advance,
    Regards,
    JBR

    Hi,
    Thanks for quick reply.
    We need restict this status only if tcode COHVPI runs inn Back gorund.Remaining cases it needs to be working as of now is fine.
    Is there any way to restict through code?
    Thanks& Regards,
    JBR

  • Can't drag a tab out

    The demo video and help both state you can drag a tab out of the current window to the desktop to make a new window with that tab. Does not work on my Windows XP system. Work for anyone else?

    Also important to note, if you want to take a separate window and make it a tab in a different window, make sure the "Show Tab Bar" under the View menu is selected, and as with removing a tab, click on it and drag it downward from the tab bar and drag and drop it onto the tab bar of the other Safari window.

  • Access Restriction tab is missing on e3000 web interface

    I am quite sure that this tab has been there before but now its missing - could it be because I have activated  Parent Control on Cisco Connect ?
    If so - how do I 'get It back'
    (I thing parent control in Cisco connect is too limited)
    Regards
    Fleohans
    Solved!
    Go to Solution.

    Yes, the Access Restrictions tab goes away when the Parental Controls section is activated. According to the faqs, a hard reset is the only way to restore it.

  • Tab out event for messageInput Text field

    Hi All,
    Can some of you please help me how to handle validation based on tab out.
    I have a field of messageInput text type in OAF standard page where user can enter a number in decimals like 11.19, 21.23 etcetera. I want to raise a message "Please enter an absolute value" the moment user enters a number with decimals and tab out. which means user will only be allowed to enter absolute values like 1,2,3,4,5..............
    Looking forward to receiving feedback.
    Thanks
    -Sunil

    Hi Sunil ,
    Since its a standard OAF page , you need to handle it through controller extension .
    Here are the steps :
    1 ) Attach PPR programtically ( In processRequest of your controller class )
    2 ) Catch the PPR Event (In processFormRequest of your controller class ) and get the value entered value
    3 ) Check if the value has any decimal point exist ( use String function in java ) and through exception accordingly .
    Code for handling fire action ( In written in your extended controller class )
    Import
    import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
    In PR :
    OAMessageTextInputBean stb1=(OAMessageTextInputBean)oawebbean.findIndexedChildRecursive("BeanID"); // replace the exact bean id
    i if (stb1!= null)
    FireAction firePartialAction = new FirePartialAction("pprEvent");
    stb1.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firePartialAction);
    stb1.setFireActionForSubmit("pprEvent",null,null,true);
    In PFR :
    if ("pprEvent".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
    OAMessageTextInputBean stb1=(OAMessageTextInputBean)oawebbean.findIndexedChildRecursive("BeanID"); // repalce your exact bean id
    String MessageTextValue= stb1.getValue().toString();
    if(MessageTextValue != null)
    String.parseString(MessageTextValue ).contains("."); // Check if this returns true / false
    Throw message here accordingly .
    Let me know if its not clear
    Keerthi

  • How do you tab out of JTextArea?

    When using the tab key to change focus from one
    JComponet to the next, how do you tab out of, and
    into next JComponent when you're in an editable
    JTextArea? Is it possible?

    Move to the bottom of the text in a JTextArea with VK_CONTROL + VK_END.
    Better yet, here is how to find all the input actions that you can trigger when focus is on a JTextArea (or any given JComponent)
    JTextArea text = new JTextArea();
    InputMap im = text.getInputMap();
    KeyStroke[] ks = im.allKeys();
    SortedMap map = new TreeMap();
    for(int i=0; i<ks.length; ++i)
        map.put(im.get(ks), ks[i]);
    for(Iterator i = map.entrySet().iterator(); i.hasNext() ; ) {
    Map.Entry pair = (Map.Entry) i.next();
    System.out.println(pair.getKey() + "\n\t" + pair.getValue());

  • JTable - loosing focus without tabbing out

    Hi all,
    I have a JTable and when the user goes to enter some text in a field I would like the value entered to persist to the underlying object as soon as the text is changed. This is without the user tabbing out of the JTable.
    Currently when a value is changed and the user hits a save button the value is not saved as the focus is still in the table, it all works fine as soon as the user enters the new value and tabs out of the table and then selects save,
    Does anyone have any suggestions?
    THanks,

    This can be done via your own TableCellEditor class. Create a TableCellEditor class. Implement KeyListener in this editor to save whenever the data is modified.
    You can set the default editor via setDefaultEditor() on JTable.

  • When tab out of an autoSubmit field I lose focus.

    Hello all!
    I'm using jDev 11.1.2.1.0
    I'm facing the following situation. In the employees VO there is a transient attribute which is actually the salary * commissionPct.
    In the jspx, in order to make things interactive, salary and commisionPct have autoSubmit=true. When I change either of the fields the transient column refreshes accordingly. Up to here everything is fine.
    The problem is that when I make a change to either of these fields and tab out the focus is lost. This is very annoying. It happens only in salary and commissionPct fields.
    Is there any way to avoid this??
    Thanks a lot!
    -apostolos

    Sudipto thanks for the link. Very useful.
    I actually use PPR in the employee Iterator, and this is because there is a master-detail functionality in the page. Suppose I have a case similar to department-employees case.
    If I remove the PPR then the master and detail are not synchronized.
    At the bottom you see the sums filed which is actually the product of salary and commissionPct.
    <af:table value="#{bindings.EmployeesVO1.collectionModel}"
                              var="row" rows="#{bindings.EmployeesVO1.rangeSize}"
                              emptyText="#{bindings.EmployeesVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
                              fetchSize="#{bindings.EmployeesVO1.rangeSize}"
                              rowBandingInterval="0"
                              selectedRowKeys="#{bindings.EmployeesVO1.collectionModel.selectedRow}"
                              selectionListener="#{bindings.EmployeesVO1.collectionModel.makeCurrent}"
                              rowSelection="single" id="t1">
                        <af:column sortProperty="#{bindings.EmployeesVO1.hints.EmployeeId.name}"
                                   sortable="true"
                                   headerText="#{bindings.EmployeesVO1.hints.EmployeeId.label}"
                                   id="c1">
                            <af:inputText value="#{row.bindings.EmployeeId.inputValue}"
                                          label="#{bindings.EmployeesVO1.hints.EmployeeId.label}"
                                          required="#{bindings.EmployeesVO1.hints.EmployeeId.mandatory}"
                                          columns="#{bindings.EmployeesVO1.hints.EmployeeId.displayWidth}"
                                          maximumLength="#{bindings.EmployeesVO1.hints.EmployeeId.precision}"
                                          shortDesc="#{bindings.EmployeesVO1.hints.EmployeeId.tooltip}"
                                          id="it1">
                                <f:validator binding="#{row.bindings.EmployeeId.validator}"/>
                                <af:convertNumber groupingUsed="false"
                                                  pattern="#{bindings.EmployeesVO1.hints.EmployeeId.format}"/>
                            </af:inputText>
                        </af:column>
                        <af:column sortProperty="#{bindings.EmployeesVO1.hints.FirstName.name}"
                                   sortable="true"
                                   headerText="#{bindings.EmployeesVO1.hints.FirstName.label}"
                                   id="c2">
                            <af:inputText value="#{row.bindings.FirstName.inputValue}"
                                          label="#{bindings.EmployeesVO1.hints.FirstName.label}"
                                          required="#{bindings.EmployeesVO1.hints.FirstName.mandatory}"
                                          columns="#{bindings.EmployeesVO1.hints.FirstName.displayWidth}"
                                          maximumLength="#{bindings.EmployeesVO1.hints.FirstName.precision}"
                                          shortDesc="#{bindings.EmployeesVO1.hints.FirstName.tooltip}"
                                          id="it2">
                                <f:validator binding="#{row.bindings.FirstName.validator}"/>
                            </af:inputText>
                        </af:column>
                        <af:column sortProperty="#{bindings.EmployeesVO1.hints.LastName.name}"
                                   sortable="true"
                                   headerText="#{bindings.EmployeesVO1.hints.LastName.label}"
                                   id="c3">
                            <af:inputText value="#{row.bindings.LastName.inputValue}"
                                          label="#{bindings.EmployeesVO1.hints.LastName.label}"
                                          required="#{bindings.EmployeesVO1.hints.LastName.mandatory}"
                                          columns="#{bindings.EmployeesVO1.hints.LastName.displayWidth}"
                                          maximumLength="#{bindings.EmployeesVO1.hints.LastName.precision}"
                                          shortDesc="#{bindings.EmployeesVO1.hints.LastName.tooltip}"
                                          id="it3">
                                <f:validator binding="#{row.bindings.LastName.validator}"/>
                            </af:inputText>
                        </af:column>
                        <af:column sortProperty="#{bindings.EmployeesVO1.hints.Salary.name}"
                                   sortable="true"
                                   headerText="#{bindings.EmployeesVO1.hints.Salary.label}"
                                   id="sal">
                            *<af:inputText value="#{row.bindings.Salary.inputValue}"*
                                          label="#{bindings.EmployeesVO1.hints.Salary.label}"
                                          required="#{bindings.EmployeesVO1.hints.Salary.mandatory}"
                                          columns="#{bindings.EmployeesVO1.hints.Salary.displayWidth}"
                                          maximumLength="#{bindings.EmployeesVO1.hints.Salary.precision}"
                                          shortDesc="#{bindings.EmployeesVO1.hints.Salary.tooltip}"
                                          id="it6" autoSubmit="true">
                                <f:validator binding="#{row.bindings.Salary.validator}"/>
                            </af:inputText>
                        </af:column>
                        <af:column sortProperty="#{bindings.EmployeesVO1.hints.CommissionPct.name}"
                                   sortable="true"
                                   headerText="#{bindings.EmployeesVO1.hints.CommissionPct.label}"
                                   id="comm">
                            *<af:inputText value="#{row.bindings.CommissionPct.inputValue}"*
                                          label="#{bindings.EmployeesVO1.hints.CommissionPct.label}"
                                          required="#{bindings.EmployeesVO1.hints.CommissionPct.mandatory}"
                                          columns="#{bindings.EmployeesVO1.hints.CommissionPct.displayWidth}"
                                          maximumLength="#{bindings.EmployeesVO1.hints.CommissionPct.precision}"
                                          shortDesc="#{bindings.EmployeesVO1.hints.CommissionPct.tooltip}"
                                          id="it7" autoSubmit="true">
                                <f:validator binding="#{row.bindings.CommissionPct.validator}"/>
                            </af:inputText>
                        </af:column>
                        <af:column sortProperty="#{bindings.EmployeesVO1.hints.Sums.name}"
                                   sortable="true"
                                   headerText="#{bindings.EmployeesVO1.hints.Sums.label}"
                                   id="c9">
                            *<af:inputText value="#{row.bindings.Sums.inputValue}"*
                                          *label="#{bindings.EmployeesVO1.hints.Sums.label}"*
                                          *required="#{bindings.EmployeesVO1.hints.Sums.mandatory}"*
                                          *columns="#{bindings.EmployeesVO1.hints.Sums.displayWidth}"*
                                          *maximumLength="#{bindings.EmployeesVO1.hints.Sums.precision}"*
                                          *shortDesc="#{bindings.EmployeesVO1.hints.Sums.tooltip}"*
                                          *id="it8">*
                                *<f:validator binding="#{row.bindings.Sums.validator}"/>*
                            *</af:inputText>*
                        </af:column>
                    </af:table>Edited by: apostolosk on May 2, 2012 3:19 PM

Maybe you are looking for

  • Exceptions in a loop

    I have a quartz job which calls my status service to update the status multiple items in a loop. Like I have 5 items whose status I want to update with the job. the job iterates collection of items and calls update item , now for some reason a item u

  • Itunes changed my files on my harddrive?

    Ok so i originally had ALL of my mp3s in a separate folder on my hard drive and when i got itunes i imported them from that folder, now the folders in my mp3 folder are still there but the music files have vanished. I checked in the itunes music fold

  • Help on Xquery writing

    I have a table as below ; and i get to a record in the table using the primary key create table raees_test unique_rec_id varchar2(16) not null primary key , racn_nbr number(5), blob_value blob, invoice_data SYS.XMLTYPE I want to query the xml type co

  • OS X Lion - will it slow down my Macbook Air?

    Does anyone know if the new OS X Lion will slow down the perfromance of my Macbook Air which has the following specifications: 2GB, 1,86 GHZ or is it better to stick with the OS X 10.6.8? I read today that Lion is having an impact on machines which h

  • Captivate 7 module sending the wrong interaction data to the LMS

    Here's an interesting one: (I hope!) I have a test created using Captivate 7 that is sending the wrong interaction data to the LMS (tested in Moodle and in SCORM Cloud). The test module was based on a previous module by using File, Save As to create