Restriction for Movement type 202

Dear SAP Consultants,
I want to make the restriction for Movement type 202 by material document.
The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
Kindly give me the details for incorporating it .
Best Regards
Deepak Rade

HI,
202 movement type is the reversal movement type of 201 (goods issue to cost center)
when we cancel material document with 201 system create reversal posting with 202
And you can manually enter 202 movement type also in MB1A and MIGO
Now if you want to restrict user to use 202 directly
GO to OMJJ -> select movement type 202 ->allowed transaction ->Remove MB1A and MIGO and save
So you can only cancel a material document of 201 to create 202 not possible to create manually (without reference)
{IF in future needed you can always add those in OMJJ again}
You can cancel material document is through T. Code MBST
This will fully serve your purpose

Similar Messages

  • Restriction for Movement type 202 - reference of 201 Movement only

    Dear SAP Consultants,
    I want  to make the restriction for Movement type 202 by material document.
    The  user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
    Kindly give me the details for incorporating it .
    Best Regards
    Deepak Rade

    Hello Deepak,
    This is SAP SNC SDN forum and your query looks like more of the of SAP MM.
    You can post your query in SAP MM SDN forum.
    SAP ERP - Logistics Materials Management (SAP MM)
    Regards,
    Nikhil

  • Restrict for movement type 201 by material typeu200F

    Dear Gurus,
    Can SAP restrict movement type 201 by material type?
    For example, Can i set authorization for 201 movement type to only material type UNBW material?

    Check this answered links
    Authorization check on movement of material type
    Material Type - Movement Type Link

  • For Movement type Enhancement

    Hi All,
    My requirment in Transaction code: MIGO Transfer posting, Movement type is 313
    when we enter material code and plant in the supplying side in MIGO transaction it comes automatically in destination side. In case somebody changes the Material code and Plant at destination side of MIGO transaction then system should show the error message that u201C Destination Material code and Plant must be same as Supplying Material code and Plant for Mov type 313u201D. This error message will restrict the user to change the Material code and Plant at destination side in MIGO transaction.
    Is it possible? if yes..please provide me the Enhancement name or user exist or Badi for this.
    I have tried, but i didn't found. Please help on this.
    Thank You
    Srinu

    Sounds like you're just dumping your spec here. What have you tried exactly to solve this yourself?
    Thomas

  • Can i restrict a movement type with respect to storage location

    Hi
    Is there any way to restrict the movement type for a particular storage locations.
    For eg.
    If am using a Mvt 311 tP btwn storagelocations.
    If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
    Is it possible
    Guide me
    Sunil

    Sunil
    Please contact your BASIS security team , with the help of Authorization roles you can restrict
    Reward if helpful
    Regards
    venu gopal

  • Conversion program to do movement type 202 and 309

    Hi everyone,
    I need to do a conversion program to upload current stock balance from 1 material to another material (Material to material transfer). This is because we have created a new material type, therefore i would need to move any current stock balance of 1 material (of a different material type) and create the material again in the new material type and transfer the current stock to it.
    Our consultant has decided upon using movement type 202 and 309 to do the goods movement required.
    Since MIGO could not be recorded, is there any other suggestion besides using ABAP program?
    Thanks in advance. Hope to get some feedback on this asap because this is urgent.

    Hi Bernard,
    You can check the direct input program RM07MMBL for goods movement.
    This is used in most of the cases to do a goods movement.
    Hope this helps
    Cheers
    VJ

  • How to set field "vendor" as optional for movement type 221

    Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
    Any help will be highly appreciated.
    Best regards!

    Let me understand ,
    u want to reserve stock with MB21 with optional for vendor code  or name .
    then against the reservation u was t to issue to cost centre or production with 201 rt .
    If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
    ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
    possible check is Movement type - screen in omjj
    GL account variant settings
    MB1a setting
    last option - create a screen variant with SHDO tode and activate it .
    all will be at client level so please

  • Field Selection error for movement type and G/L account

    I am currently experiencing a field selection error between movement type 601 and G/L account 7140000.  The problem field is 'Segment'.  This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
    However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
    Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
    Many Thanks

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

    Hi All,
    Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
    I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
    IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
    Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either  "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
    Please advise or help me .
    Thanks in advance!
    Regards,
    Praveen

    Hi
    The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
    Anyway, you first need to make the field as optional for example, before you move.
    One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
    regards
    Sidi

  • Issue with Return Delivery for movement type 262

    Hi,
    I have got a strange issue, the user is trying to do a MIGO Return Delivery for a material document using movement type 262, this he claims has been doing it for many materials. However when i go to the MKPF table i see the transaction Code field to be MIGO_GI for all the material documents for which he claims to have done return delivery. But under this transaction code we have only 4 options - Display, Issue, Cancel and Remove from storage.
    Now when he tries to do the return delivery for movement type 262 he get an error message "Check table T156N: entry RL 262  does not exist" , but this has been very well maintained in the table.
    Can you please let me know -
    If it is possible to do a return delivery for a movement type 262?
    If yes how to address the above error encountered.
    Thanks in advance
    Sachin

    Hi Sachin,
    If you think of return delivery to vendor with or w/o PO reference you can use movement types 161, 122, 124 as default settings.
    Movement type 261 means withdrawal against production order and its reverse is MVT 262. The latter can be used e.g. via MB1A (or you can make storno of a confirmation by 261).
    Are you sure your user is using the correct terminology ('return delivery')? Please check the material documents he/she claims to have booked as return delivery. (in MB51 you can get a list of all material movements of MVT 261 that belong to 'your user' and after that you can open the material document and check through which transaction the booking was made.)
    BR
    Csaba

  • Error in MB1C but works perfectly in MIGO for movement type 501.

    Hi
    I get an error in MB1C but works perfectly in MIGO for movement type  501
    here is the error Account 353300 requires an assignment to a CO object.
    I know for this if we add the co object in OKB9 it works.
    But my question is - how it works in MIGO transaction but throws an error in MB1C
    Any idea ? has any one faced this kind of an issue ? Please let me know.
    Thanks
    Dkmurthy

    Hi
    Are the entires same in both the transactions? Means did you check 353300  GL was hit when you posted through MIGO?
    Check in FS00 - for GL account 353300 - under bank/interest tab - double click on field status variant -> under Additional account assignments - CO object is ticked as mandatory?
    Thanks

  • HUMO-A reason has to be entered for movement type 344

    Hi All,
    We currently have the system configured to enter a 'reason for movement' for movement type 344 and this field is marked as required in the movement type configuration. We have configures the transactions allowed for the movement type and HUMO is one of them.
    When I try to post the same HU using the path 'Edit-> Change HU Posting-> Other Postings->Process-> Transfer posting unrestriced to blocked', it prompts me for a 'Reason for Movt' and allows me to post it to a blocked stock.
    However, when we try to post an HU to blocked to stock using the path in HU monitor 'Edit-> Change HU Posting->In Blocked Stock', the system gives an error 'A reason has to be entered for movement type 344'. Please note, it does not even prompt me to enter a reason for the movement.
    Is there a configuration node to have the above error corrected? Or is there any SAP note which could help us solve the problem? We are aware of the SAP note 1679167 for transaction VLMOVE but not sure the same would actually correct the issue for HUMO. Any help in this regard is appreciated.

    Hello Biswajit,
    unfortunately, as far as I can see in source
    SAPLHUMO                 
    / LHUMOF04
    FORM                     
    / TRANSFER_POSTING_HU
    during debugging, there is no GUI code to ask user for a reason. So it's a lack of functionality.
    I think you can add this by an implicit enhancement around FORM transfer_posting_hu asking user e.g. with function module call POPUP_GET_VALUES_DB_CHECKED.
    But transfering the entered reason down to the MM posting seems also not so easy because reason field "GRUND" may not visible in that callstack level.
    Hope that helps you along
    Best regards,
    Matthias

  • BAPI_GOODSMVT_CREATE for movement type 161, issues in PO creation

    Hello Gurus,
    I am using movement type 161 with BAPI_GOODSMVT_CREATE in order creating a vendor PO based on the goods receipt posted with the BAPI.
    It works fine, nevertheless due to business requirements, I need to apply the following changes:
    - in SAP standard the order type is NB by default but in our case I would like to force another order type using the same range that NB. I guess this could be done by activating exit ZXM06U17 (MM06E003). Does someone could confirm it?
    - in our process, the purchasing group is not maintained at vendor level (LFM1-EKGRP) but as this field is mandatory in the PO creation and as this data can not be maintained in BAPI_GOODSMVT_CREATE, does someone know if it would be possible to force this value during the PO creation (EKKO-EKGRP) based on a maintenance table? If yes in which user-exit? Exit ZM06U43 could be used?
    - furthermore, our specific PO type should have a specific account assignement EKPO-KNTTP instead of the default value U, does someone know if it would be possible to force this value during the PO creation (EKKO-EKGRP) based on a maintenance table? If yes in which user-exit? Exit ZM06U43 could be used?
    Kind regards
    Chris

    Hi Priya,
    Just want to share with your guys how to fit this error in BAPI_GOODSMVT_CREATE.
      For movement type 161 of PO return you have to pass movement type 101 instead of 161
    goodsmvt_item-bwart = 101. After that standard function will determine 101 to 161 automatically and
    post that material doc.
    NOTE:
      In my case
      It just heppen only the FIRST time that you do movement with PO Return wich is needed to pass
    101 in stead of 161 but after that you can pass 161 the system will continue process correctly.
    Hope it help.
    Sayan.

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

Maybe you are looking for