Restriction in event reported date and time

Dear All,
            We have a requirement where we want to keep check on all the reported events such that none of the events are reported with future date and time.
          We have some 25 reporting events and we have an option to keep the check in Preprocessing  FM but then i have to add the customizing of each of the reported events.
  Do we have any possibility to keep a validation via customizing on Actual Reported Date and time event to be within current date and time i.e. no future event is possible without using preprocessing functionality.
Thanks,
Shubh.

Dear Steffen,
                   Thanks for your reply but what i meant to ask is as below :
                   For an event which I am reporting , I have actual date and time as a field. In this field user  can enter any date and time and this will be treated as reported date and time for that event.
   What I need is the restriction that none of the reported date and time is in future from the time when user is actually reporting the event. I am not considering planned date and time as the criteria for restriction.
Thanks,
Shubh.

Similar Messages

  • Work Status Report Date and Time Setting

    Hi all
    We are running BPC10 on servers configured with Central European Time which is currently 2 hours ahead of GMT allowing for Daylight Savings Time.
    From what i can see in BPC10 date and times are now stored in GMT (Zulu time) in the Audit activity tables so when a user updates the work status at say 11:00AM local CET time then a value of 09:00AM GMT is stored in the Audit Activity Header table.
    We have a report in excel that uses the EVLCK formula and will return the correct value of 11:00 am however if we run the Work Status Audit report on the Planning and Consolidation home page with user preferences set to Central European Time +1 then the time is displayed as 10:00am suggesting that daylight savings time is not accounted for. We need to set the time to Eastern European time +2 hours to display the correct figure.
    Can anyone explain why this happens? Has DST been overlooked?
    Rgds
    Alan

    Hi Alan,
    probably it's a bug, I think it's better you open an OSS message to SAP.
    Regards
         Roberto

  • Why do some events show date and time in ical?

    Some events show the date and time, others show only the time. I cannot find a setting in preferences to have it be one way or another. I do enter events both on the computer and also my iphone 4s, but that doesn't seem to be the difference.

    oz81dog wrote:
    Does anyone have any clues for me?
    Look in Window menu > Previous Recipients

  • DVD camcorder (VIDEO_TS) - preserve clip date and time

    I had asked this question on the forums a long time ago but iMovie did not seem to be supporting it reliably at the time. But since some time has passed, I wanted to check if iMovie '09 can import clips from a mini DVD (those used in camcorders to capture video directly on to DVD media) AND preserve the clip's date and time.
    What I see is that the first clip gets some date and time related to the event's date and time (perhaps the start time of the first clip?) but all the other clips which are imported, get timestamps of 1 second after that first clip's timestamp.
    These are all my home videos and in order to keep each clip short, I have had the habit of pausing after about a minute or two, resulting in MANY clips over MANY DVD's, so manually updating date and time is absolutely the last resort.
    The DVD player can see the clip date and time correctly, and so could the camcorder (I have since sold the darn thing!) so I know that information exists somewhere in the DVD, but it seems like iMovie is unable to "see" it.
    Any help would be appreciated, including programmability hints.

    Thank you for your post.  I figured out why iMovie was assigning today's date to everything that I imported.  It turns out that many of my video files did not have a real "created" date--some had no date at all and some had Wednesday, December, 1967 or 9 (I think).  iMovie defaulted today's date in both of these situations.  I took your advice and ot A Better Finder Attribute and easily converted all of the files using the option to copy the "modified date" into the "created date" attribute.  Now everything imports correctly into iMovie.

  • User login report in Active Directory for specific date and time

    I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
    Is any query, script or any tool available?
    Waiting for reply please

    You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
    If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
    I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • When I try to adjust the date and time of an event by selecting Photos from iPhoto, the year I enter is altered.

    I have images in iPhoto from an older digital camera which did not record the date and time.  In iPhoto, with an event selected, I have tried to adjust the date and time by choosing Photo.  When I adjust the date and check Modify original files, it makes the date much earlier--in centuries.  I now have an event from August 2003 (the date I entered) which reads June 2, 1251 under the event!  When I attempt to correct it, it goes back further in time.  What am I doing wrong?

    (I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
    Why are you using iPhoto at all? use image capture or drag and drop the photos
    The problem is that the files I am copying are getting stripped of the EXIF metadata
    eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen  For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
    Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
    Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
    LN

  • How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    BKBK,
    Thank you for your response. That does adequately cover the
    client-originated sessions, but still leaves the ability I am
    looking for unavailable.
    It did serve to definitively answer my most pressing
    question, however, with this statement:
    Note: ColdFusion cannot create a session if an initiator
    application uses a SendGatewayMessage method to start an
    interaction with a client, such as an SMS user. In this case, the
    sending code must keep track (for example, in a database) of the
    messages it sends and their destinations. When a response event
    arrives, it can look up the origniatorID to determine whether it
    was in response to an outgoing message.
    I will play around with the Application scope to see if there
    might be a workable solution there.
    RLS

  • Adjust Date and time for all Photos in an event?

    Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?

    How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
    Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode.

  • How to display last data update date and time in report?

    Hai All,
               I want to report the date and time of the last upload in a report. How can I do this?
    I mean if I load the data today 5th April 2006 at 8.30 pm, then would i be able to show that on my report at the top of it(along with filer objects may be)?
    Thank you.

    Hi Visu,
    You will find detail info from help.sap
    check the links and they are  useful
    BEX Analyzer:
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/frameset.htm
    Web Application Designer
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/frameset.htm
    -Doodle
    Message was edited by: Doodle

  • Entourage Calendar Events: Dates and times are not being saved accurately

    After an event has been created and saved, the date and time will change pushing the event forward, but not consistently. Some events jump forward a few hours others an entire day or more. I've been using this program for many years without fault but this problem started several days ago after a recent automated software update. It is not only happening with newly created events, it has also altered events saved weeks ago! (note: time zone is set accurately in the System Preferences and Entourage)

    I would check Microsoft's Entourage 2004 forum to see if others have experienced the same issue. Entourage 2004 has been replaced with Entourage 2008 awhile back. It may be those issues are fixed with 2008 and will never be in 2004, or you may need a later patch for 2004. If the automated software update was Microsoft's I'd contact Microsoft, if it was Apple's, this may just be a sign you need to upgrade your Microsoft to keep up with Apple. Whenever you do a system level software update you always need to verify compatibility bugs don't exist with the newer system when you are talking about other third party software. There are way too many third party software titles out there new and old for Apple to test with its own system given the time frame people desire updates.

  • How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

    How can I see Date and Time of an event in iMovie 10.0.4?
    Thank you for your answer.
    greetings from Switzerland

    Managing Profiles
    http://support.mozilla.com/en-US/kb/Managing-profiles

  • Using + and - keys to change dates and times; Find and Replace event

    Hi all, \
    I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
    1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
    2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

    Don,
    ...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
    I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
    Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
    AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
    ;~)

  • How can I get the date and time and display it on the report main page?

    Gurus,
    How can I get the date and time and display it on the report main page?
    Thanks!

    Hello,
    You can create a Formula Colum returning a date :
    function CF_1Formula return Date is
    begin
    RETURN(SYSDATE);
    end;
    Put a Field in the Layout having this formula column as source .
    Regards

  • Reportable Last Modified Date and Time Field

    Reportable Last Modified Date and Time Field
    Hello,
      We need a reportable RequestCenter 'last modified date/time' database field that is refreshed when the 'Comments and History' field is updated.  Any ideas would be appreciated.  Thanks! 

    No, unless you can use an FTP client.

  • Report the date and time of all the systems reporting to sccm

    Hi,
    We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
    Appreciate any help regarding this.
    Thanks

    Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

Maybe you are looking for

  • Need to connect SQL Server 2008 and CR 2008 via OLE DB SQL Server Provider

    I am relatively new to Crystal but have done some minor design/layout work in the past. I just purchased CR 2008 and dowloaded a Eval Copy of SQL Server 2008 to build test reports that will then be uploaded to a hosted web app we use for use with liv

  • Wwsto_api_session: problems on refresh

    Hi, I have a portlet [pl/sql based]. In package of this portlet (procedure show) I am working with the session objects: 1. Load the session object, using load_session method. 2. Manipulate the attributes of the session object by using the set_attribu

  • Inter Company Reports

    I am looking for an SAP standard report that will show IC receovable and Payables between multiple companies. I will then use this information for external consolidation purposes.

  • OFR - Supplier matching "Vendor ID + Vendor Site ID"

    Hi I am configuring OFR to read invoices that will be passed into an EBS environment. The standard set up of OFR is that Vendor ID identifies a unique vendor, but for EBS you need to be able to identify a supplier by VENDOR ID and VENDOR SITE ID. App

  • One MIDI input, one set of modulation parameters for the EXS24

    This might be somewhat of a neophyte question, but here goes: I'm interested in being able to set a specific set of modulation parameters for each note in series of notes inputted into the EXS24. I'd like to be able to bypass any sort of complex rout